Debug/Trace at individual Composite Level

Hello All,
Morning , need some inputs regards this question.
--we are getting the errors mentioned here (ORA-29261 bad argument , ORA-06512 at SYS.UTL_HTTP) while calling the composite (which is a bpel process) deployed on 11.1.1.4 Soa Suite.
---From PL/SQL side we are calling this composite by forming the soap request by using : utl_http.begin_request('end point location of composite', 'POST', 'HTTP/1.1')
1.is there any way we could enable debugging/tracing only for this deployed composite to see whether for any reason this HTTP call to this process is timing out
we have many composites deployed to this partition, could we enable tracing only for this specific one.
2.Also wanted to know within the Soa Suite 11g , what other options are available for tracing as in Soa Suite 10g there used to be opmn logs, bpel logs , domain logs etc..
3. Whether debug could be enabled at Web Logic Server level itself, as we are not sure what could be the issue here whether the HTTP connection is timing out or WLS server gets stuck & doesn't respond after some time
due to some issue
Please do assist here with some details & pointers , as this issue is a bit critical for us.
regards

Hi,
This is your error, You need to recover this file E:\ORACLE\DR0\SAPDATA2\UNDO_1\UNDO.DATA1
ERROR => CONNECT failed with sql error 604. [dbsloci.c 11479] B ***LOG BY2=> sql error 604 performing CON [dbsh#4 @ 1208] [dbsh 1208 ] B ***LOG BY0=> ORA-00604: error occurred at recursive SQL level 1 ORA-00376: file 2 cannot be read at this time ORA-01110: data file 2: 'E:\ORACLE\DR0\SAPDATA2\UNDO_1\UNDO.DATA1'
Read this thread
recover database
Thanks
Siva

Similar Messages

R12 12.0.4, System Administration, Debug, trace, log enabled monitoring

Hi guys,
I posted the same question with oracle.ittoolbox few days back and yet to get an answer. During the initial stages of implementation, I remember the consultants using a particular jsp/html page under System Administrator responsibility to view the status of diag, trace, log enabled status of the system, akka, if a profile option is enabled to debug, trace, or log was listed...
Now, I want to access the same page (I have system administrator resp). The SQL query provided by metalink is too complex to understand
Please help

Hello again Hussein and others
Our issue was NOT just with FND% profiles, rather with the consultants turning on diag and debug against their respective modules and later forgetting to turn them off. Take our case, we had SLA Debug enabled from last 2010 Feb until two days back, which has created 21 million rows of data with XLA diag table :)
Once after turning the SLA debug and truncating the table (following Oracle guidelines) we have a database which is 1/3 of the size until recent times. Oracle has provided us an SQL query which produces the present status of all profiles with latest values (enabled or disabled). We were able to see a number of profiles with debug enabled and successfully disabled them.
I represent the internal IT team and always have the acceptance for human errors like the SLA debug event. Oracle "apologized" for not having a screen or html form for monitoring such resource hungry activities. The output from the SQL script they provided is too complex for a person who doesn't have core techno functional knowledge about the system.
Anyway, finally feeling a bit better...
Thanks guys

Access composite level property in BPEL

Hi,
   I have a composite level "auditLevel" property defined in composite.xml as given below. Can anyone suggest a way to access that property in BPEL process ?
<composite name="SetInstanceTitle"
               revision="1.0"
               label="2015-04-12_18-52-43_897"
               mode="active"
               state="on"
               xmlns="http://xmlns.oracle.com/sca/1.0"
               xmlns:xs="http://www.w3.org/2001/XMLSchema"
               xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy"
               xmlns:orawsp="http://schemas.oracle.com/ws/2006/01/policy"
               xmlns:ui="http://xmlns.oracle.com/soa/designer/">
      <import namespace="http://xmlns.oracle.com/CompositeSamples/SetInstanceTitle/SetInstanceTitleWithCondition"
              location="SetInstanceTitleWithCondition.wsdl" importType="wsdl"/>
      <service name="setinstancetitlewithcondition_client_ep"
               ui:wsdlLocation="SetInstanceTitleWithCondition.wsdl">
        <interface.wsdl interface="http://xmlns.oracle.com/CompositeSamples/SetInstanceTitle/SetInstanceTitleWithCondition#wsdl.interface(SetInstanceTitleWithCondition)"/>
        <binding.ws port="http://xmlns.oracle.com/CompositeSamples/SetInstanceTitle/SetInstanceTitleWithCondition#wsdl.endpoint(setinstancetitlewithcondition_client_ep/SetInstanceTitleWithCondition_pt)"/>
      </service>
     <property name="auditLevel" many="false">Off</property>
<component name="SetInstanceTitleWithCondition" version="1.1">
    <implementation.bpel src="SetInstanceTitleWithCondition.bpel"/>
   </component>
Thanks in advance,
Saba

Hi AnatoliAtanasov,
Thank you for your reply.
My requirement is to set composite instance title by retrieving SOA Audit Level settings in BPEL process.
Need to set composite instance title If "auditLevel" is not "Off" or "Inherit".
If I use this composite level property "<property name="auditLevel" many="false">Off</property>", it is getting reflected in EM Console. Also this property value get change if do auditLevel change from EM console.
So I thought, I can use this property to control composite instance title setting in BPEL process dynamically.
Please advise me any possible solution to achieve my requirement.
Thanks in advance,
Saba

Is it possible To Debug (trace) a Pro C program..in UNIX plattform..?

I want to debug Pro C programs in UNIX plattform. Now i am tracing the program by inserting several printfs in program. its difficult.Please let me know any easier method exists..
Thanks
Rinson

Is it possible To Debug (trace) a Pro C program..in UNIX plattform..? raised question is not related to this forum.

Launching flow trace for SOA composite leads to login page

Hi,
I am using windows vista, oracleXEuniv, oracle fusion middleware 11g 11.1.1.3.0, SOA 11g PS2+PS3, jdev 11.1.1.3.0+SCA composite editor 11.1.1.3.0.25.57
Now after logging into enterprise manager fusion middleware control when I browse to my soa composite by clicking
SOA->soa-infra(soa_server1)->default->validationForCC[1.0]
This list me all the recent composite instances. Now if I click on any of the instance ids a new pop up window is open which displays enterprise manager login screen.
In addition if i click on 'Launch Message Flow Trace' on Test composite page then also it happens the same way.
Does anyone know what configuration I might be missing?
In logs i only get following
####<07/12/2010 12:27:14 PM EST> <Warning> <org.apache.myfaces.trinidad.bean.PropertyKey> <kapilPC> <AdminServer> <[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <4a432b45d3fd32e0:-302436ff:12cbe3b48bc:-8000-000000000000016f> <1291685234358> <BEA-000000> <Unserializable value:oracle.sysman.core.view.tgtctls.common.DefaultTreeModel@148f6b5 for key:UINodePropertyKey[value,17]>
[2010-12-07T12:27:14.358+11:00] [AdminServer] [WARNING] [] [org.apache.myfaces.trinidad.bean.PropertyKey] [tid: [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000ImyS3Tv2jKYFLryGOA1CzNyi00003x,0] [APP: em] [dcid: 4a432b45d3fd32e0:-302436ff:12cbe3b48bc:-8000-000000000000016f] Unserializable value:oracle.sysman.core.view.tgtctls.common.DefaultTreeModel@148f6b5 for key:UINodePropertyKey[value,17]
Kapil Sapra

Hi,
I followed the information given in the thread. I downloaded the version 11.1.1.0.0.52.19 and tried to install it. But JDeveloper gave an error saying
This update cannot be installed. It requires other extensions which are not installed, or which are installed but incompatible.
Extension...................Required Version.......................Installed Version
Oracle.studio..............min=11.1.1.1.33.54.07...............min=11.1.1.0.31.51.88
Oracle.j2ee................min=11.1.1.1.33.54.07...............min=11.1.1.0.31.51.88
I am giving the details of the JDeveloper version installed on my machine.
About
Oracle JDeveloper 11g 11.1.1.0.1
Studio Edition Version 11.1.1.0.1
Version
ADF Business Components........... 11.1.1.51.88
CVS Version.............................. Internal to Oracle JDeveloper 11g (client-only)
Java(TM) Platform...................... 1.6.0_05
Oracle IDE................................. 11.1.1.0.31.51.88
Versioning Support.....................11.1.1.0.31.51.88
Properties
All the properties are of version....11.1.1.0.31.51.88
There are only two version of downloads available. Can anyone help in getting the correct version of SOA composite editor which might had been archived?
Regards,
Pavan

How can we enable the trace at schema / user level

Hi ,
I knew how to enable the trace at session level and system level.
How can we enable trace at schema / user level.
Thanks
Naveen

I still don't understand.
As far as I know, 'trace' means 'to emit information about a subset of the steps being taken through code, generally to profile timing or identify code paths'.
As far as I know, a user and a schema are passive. There is absolutely no code 'running' against a user or a schema. I have no idea what could be 'traced' for a user or schema that is not already available in the data dictionary.
Further, a schema is nothing other than a named set of database objects. The name happens to be tied to a specific userid. So a schema could be considered a special kind of userid - although that is technically incorrect.
A session, on the other hand, is active. There is code running, there is memory assigned. It happens to link to the connection established by a user, using a specific userid.
I think you have told us you know how to turn on tracing for a session.
Why can you not turn on the traciong for all the sessions for a userid?

Properties on composite level

Hi,
Im making a project for Oracle SOA Suite 11g. What i want is to have properties that are accessible to all the components. I have tried to define properties in the composite.xml file. It works and they show up in the MBeanBrowser, but i can't access the mfrom the BPEL components. I have tried using the ora:getPreference() function, but this seems to only look for properties defined within the component itself.
Is there any way t odefine properties on composite level and acces them on composite level.
Kind Regards
Oddgeir Gitlestad

Hi,
I guess there is no option to access the property from another composite directly. But still if you want to have some kind of global property through out all your composite, in that case you can store all those property definition either in a file or database and then build a composite which can access these properties from the file or DB through adapter.
Then use that common composite to be used in all other composites using Web service . Then use the Config Plan to change those property values for different environments during deployment and these property values.
Edited by: Pradosh Kumar on Feb 1, 2013 9:54 AM

That old chestnut: *** Security Sandbox Violation *** clogging the debug trace

Hi,
I am attempting to debug a project for Flash Mobile and getting very irritated by *** Security Sandbox Violation *** warnings whenever I move, touch or interact with the application in any way whatsoever. These typically fire two or three _PAGES_ of warnings for a simple drag operation... Because there are so many of these warnings, the debug trace is effectively redundant and useless unless I actively insert a manual break point immediately after the traces I want to view - fine for a comms operation, not so useful when attempting to debug coordinates for a drag operation.
The cause, obviously, is that I have loaded external content for display in a SWFLoader component...
Because I am in AIR for mobile, I cannot access Security to allow the domain and crossdomain from the content provider is ignored or not loaded.
I have found a number of references to this ranging from very recent to several years ago, such as this one which indicates a) the trace is a bug and b) something was being done about it: http://forums.adobe.com/thread/576999
I cannot find any reference to a fix ever being implemented and the trace issue is driving me nuts.
Please, please, please can somebody direct me to a workaround to hide this? I've tried all kinds of disabling for mouse events, keyboard events, mouse children etc.
Thanks,
Overwhelmed-in-the-traces of Dublin

Is it bad form to bump?
G

[svn:osmf:] 13872: Removing lingering debug trace.

Revision: 13872
Revision: 13872
Author:   [email protected]
Date:     2010-01-29 01:07:15 -0800 (Fri, 29 Jan 2010)
Log Message:
Removing lingering debug trace.
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/layout/LayoutRenderer.as

Hi,
You are the first person I have read so far on this forum who does not use Flex or Flash builder. I will check out FlashDevelop. It is good information to know. Thanks a lot!
-Wei Zhang
Senior Computer Scientist
Adobe Systems, Inc.
[email protected]

Turning Off Spry.Debug.trace

The statement 'Spry.Data.Region.debug=false' doesn't stop the
debug output from Spry.Debug.trace statements in javascript
functions in the web page. Only Spry's internal debug output is
stopped. Is there any solution, short of removing the statements
that are in the functions?

Thank you for the reply.
I understand the point about 'error' messages, of which I
have none.
The messages in the 'debug' popup I'm referring to are those
created by my own Spry.Debug.trace("....") statements in my
javascript functions.
Setting Spry.Data.Region.debug=false does not stop these from
writing output to the popup.
I was wondering if there was a contol similar to setting
Spry.Data.Region.debug=false, or do I have to remove the trace
statements from the code when I'm done testing?

VC 7.1 SP05 unspecified error - how to read the debug trace?

Hello,
I am trying to consume a enterprise service with VC 7.1 SP05.
Beforehand, I have tested the parameters using WSADMIN, and I know what I have to pass.
Unfortunately, when feeding the same parameters to my VC model, I get a error message, and I cannot find out what is the problem. By reading the default trace, i cannot extract the relevant information.
The error message I get from VC is:
"Error occurred during Data Service, L_SRV Execution"
The trace level is set to "debug", but as said, I am not able to find the relevant part in the trace file.
Maybe someboy could teach me??
Thanks,
Dominik

Hi,
I just sent the trace file.
The service has several inputs.
https://wiki.sdn.sap.com/wiki/display/ESpackages/FindDemandPlanKeyFigureValueby+Elements
I am passing parameters on the top level, and then using a data bridge, two more parameters one level below.
Thanks,
Dominik

Debug/Trace a proxy client?

Hi,
I've created a proxy client and logical port to consume a web service in SAP 6.40. However, I'm getting an error upon testing from SAP that one required field in missing; I'm not getting any error when I test from WFETCH.
Is there any way to decode the xml soap error messages? Is there a way to do a trace?
There are couple of checkboxes in the logical port for increasing trace and logging, but there are those file??
Thank you all for your help!

Hi,
use /h is another dubugging methos run the total program in debugging mode and check total program.
and check below link for sql trace
/people/siegfried.boes/blog/2007/09/05/the-sql-trace-st05-150-quick-and-easy
Regards,
Madhu

ABAP Debugging Trace

Hi,
is there a built-in tool in the ABAP debugger to trace the complete source code and copy in a text file, for further analysis?
I would like to compare the source code for similar processes, to find gaps, for instance why the first process works as expected and the second one doesnt. If I have two files with the complete source code, that was proceeded from the debugger, than I could seek the source code position, where the erroneos method or function group branches otherwise.
Thanks!
Regards,
Laura

laura2010 wrote:
Hi,
>
> is there a built-in tool in the ABAP debugger to trace the complete source code and copy in a text file, for further analysis?
>
> I would like to compare the source code for similar processes, to find gaps, for instance why the first process works as expected and the second one doesnt. If I have two files with the complete source code, that was proceeded from the debugger, than I could seek the source code position, where the erroneos method or function group branches otherwise.
>
> Thanks!
>
> Regards,
> Laura
You may start your analysis/comparision with the files generated by the SE30(Runtime Analysis), this would give you a good overview of deviations at a high level, if you are looking for deviations within the same modularazation unit you may find [this blog|http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/22536] helpful, however you have to be on Netweaver 7.0 Ehp2
to be able to use the features explained.
-Rajesh.

Debug Trace/Breakpoint Facility

Is there a trace facility where you can see rules as they fire. I'd like to be able to set breakpoints when debugging rules to figure out why that specific rule path is being taken. I'm trying to detect why rules that should be firing aren't.
The visualization diagram looks right, but the rules aren't firing.
Thanks,
Terry

Hi there,
I did try to use this approach, but, from what I can tell, I see the results after the rule has fired. I want to trap it at the point that a common rule is going to fire, look at the data at that point and that will tell me why the path that was taken was taken. When you have a lot of rules, reviewing the data results isn't very easy. Somehow, highlighting the values that changed with the last rule would be nice. Or do you do this and I don't know how to trun the feature on?
The data may have changed if I look at it after the wrong rule has fired.
Since OPM is figuring out what the next rule to fire is, which is entirely logical to OPM but seems haphazard to me at times, I may not be sure what that prior common rule is.
I guess I'd like to see a diagram of the agenda that shows what rules have fired with access to the data/rules that got me to this point and what rules will fire depending on the answers to the next question to be asked. Am I asking for an interactive decision path to help me figure out where I am and how I got here? I think yes.
I've been going back to visualization diagrams to help me figure out where my rules have gone wrong.
Terry

Debug/trace info from .c program.....

Is there a way to capture debug info from a c file that was executed by teststand (dll adapter)? To be more clear....I have a dll that has a lot print to screen statements all over the place. I would like to be able to see those prints in somekind of trace or debug window while teststand is running.

Hello Gregg,
I assumed you are using printf commands in your code. As far as I know, if you are printing to the screen I don't think you can get it from TestStand. However, there are a couple of options.
1. you may modify your code and write to a file intead of screen and read this file in a separate module that will be running in parallel to your sequence.
2. you may create a panel in the CVI DLL and update your messages to a control. Also you may need to have an additional function in your DLL to be called to display the panel
3. you may pass the sequence context to your DLL function and write the text messages to TestStand Variables and create additional functions to read and display this variables.
4. You can use message boxes in your CVI
code instead of printing to the screen
Regards,
Roberto Piacentini
National Instruments
Applications Engineer
www.ni.com/support

Debug/Trace at individual Composite Level

Similar Messages

Maybe you are looking for