VC 7.1 SP05 unspecified error - how to read the debug trace?

Hello,
I am trying to consume a enterprise service with VC 7.1 SP05.
Beforehand, I have tested the parameters using WSADMIN, and I know what I have to pass.
Unfortunately, when feeding the same parameters to my VC model, I get a error message, and I cannot find out what is the problem. By reading the default trace, i cannot extract the relevant information.
The error message I get from VC is:
"Error occurred during Data Service, L_SRV Execution"
The trace level is set to "debug", but as said, I am not able to find the relevant part in the trace file.
Maybe someboy could teach me??
Thanks,
Dominik

Hi,
I just sent the trace file.
The service has several inputs.
https://wiki.sdn.sap.com/wiki/display/ESpackages/FindDemandPlanKeyFigureValueby+Elements
I am passing parameters on the top level, and then using a data bridge, two more parameters one level below.
Thanks,
Dominik

Similar Messages

How to read the CallManager traces?

Hello,
I've collected a couple of CallManager traces in order to do some troubleshooting. Is there any tool or software available to read the traces in a simple way? At this moment when I open the text file, I can see only codes. Any help will be highly appreciated.
Regards,
Sana

try VLT
Cisco Voice Log Translator 2.7 User Guide
http://www.cisco.com/en/US/docs/voice_ip_comm/cvlt/2_7/english/user/guide/vlt27_ps556_TSD_Products_User_Guide.html
you can download it here:
http://www.cisco.com/cgi-bin/tablebuild.pl/voice-tool
maybe this will show the info the way you're looking for, i know for sure this one can handle H225 and H245 message since it's the one i use when i want to look at messages from a specific call since it can filter them by protocol or call reference among others. i always end up reading the txt but it's a lot easier if you have the timestamps to look at when there are a lot of calls on the same file =)
HTH
javalenc

I upgraded iTunes to 11. I now receive an error message which reads - 'The iTunes Library file cannot be saved. An unknown error occurred (-50). How do I correct this error?

I upgraded iTunes to 11. I now receive an error message which reads - 'The iTunes Library file cannot be saved. An unknown error occurred (-50). How do I correct this error?
Thanks
TDB

I know this doesn't help you Bud, but I've had this issue for at least the last couple of versions. If I can ask, what is you enviornment like? Local PC only, libray saved on another PC/Server?
In my case my library is on Windows 2003 server with the share mapped to drive M: This has worked for many years through both XP and Windows 7 until and update a while ago.
Thanks,
Rob

How to read the error message like clipping positive or -ve in Tektronix oscillioscope 3012B

During acquiring the Sine wave or triangular wave from TDS3012B, if the amplitude or Max or min is clipping, how do you read the error? I used *ESR?, first time when I ran the error query program, it gave me Error message saying it is clipping, after that If I run again,the error query , It would not give me the error message, I couldn't reproduce it, eventhough but On the screen if I measure, Amp, min and Max it says that it is clipping positive or -ve. I was wondering how to read the error message while aquiring the data? If any one could help me that would be of great help.. Thanks

Usually, reading the error status register clears it. I'm not familiar with this particular model of scope but you may have to initiate a new acquisition in order for the scope to generate a new error. Another possiblity is that a new error will be generated when the vertical scale changes. Unless someone posts with an answer, I'd say that your best bet to get an answer is to contact Tektronix technical support.

How to read the DB application error in JSP

We have the PL/SQL triggers that perform validations on the insert and update. If validation fails the RAISE APPLICATION ERROR is used.
On error the errorpage.jsp is called correctly, but my problem is that I can not read the actual error message from database.
All I am getting from exception.getMessage() is the JBO message. The exception.printStackTrace() does not help either. How can I read text of PL/SQL exception message ?
I have tried this test in errorpage:
if( exception instanceof oracle.jbo.JboException ) { ...}
but apparently the exception is not JboException, since test fails.
I read about ApplicationModule.setExceptionHandler() and even build exception handler which does not do anything. I assumed that this would allow all exceptions to be passed to the error page. Nothing like that happens though. I still see only last JBO exception, I can not see the original DB exception.
Thanks in advance,
Michael

Hi ankur,
thanks for the quick reply,
I have got the answer for the first question.
Can u tell me solution for the 2nd question also. how to read the Portal user information in VC. like reading the Portal user information in webdynpro.
In webdynpro we can read any of the portal user properties or information like using the following code.
Itry{
IWDClientUser user = WDClientUser.getCurrentUser();
String fName = user.getFirstName();
String lName = user.getLastName();
}catch(Exception e){
In the same way to read the portal user information in VC. BCz for every portal user we have created one custom properties, we need to read that propety value in my vc application, when the user logged in to portal and accessing integrated VC application.
I have seen one of the thead this is possible from VC7.0 of NW2004s, current my version is also the same.
Portal 7.0
VC 7.0
If u know how to do that, can u let me know.
Regards
Vijay

How to read the and Write the PDF file give me the solution

Hi all,
How to read the and Write the PDF file give me the solution
My coding is
import java.io.File;
import com.asprise.util.pdf.PDFImageWriter;
import com.asprise.util.pdf.PDFReader;
import java.io.*;
import java.io.FileOutputStream;
public class example {
// public example() {
     public static void main(String a[])
          try
          PDFReader reader = new PDFReader(new File("C:\\AsprisePDF-DevGuide.pdf"));
               reader.open(); // open the file.
               int pages = reader.getNumberOfPages();
               for(int i=0; i < pages; i++) {
               String text = reader.extractTextFromPage(i);
               System.out.println("Page " + i + ": " + text);
// perform other operations on pages.
PDFImageWriter writer = new PDFImageWriter(new FileOutputStream("c:\\new11.pdf"));
               writer.open();
               writer.addImage("C:\\sam.doc");
               writer.close();
               System.out.println("DONE.");
reader.close();
          catch(Exception e){System.out.println("error:"+e);
          e.printStackTrace();
I get the pdf content then it returns the string value but ther is no option to write the string to PDF, and we only add a image file to PDF,but i want to know how to wrote the string value to PDF file,
Please give response immtly
i am waiting for your reply.
thanks,
Suresh.G

I have some question flow
How library to use this code.
I try runing but have not libary.
Please send me it'library
Thank you very much!

Error 4014 Severity 16 State A fatal error occurred while reading the input streamfrom the network

We encounter following error intermittently Error 4014 Severity 20 State 16 , A fatal error occurred while reading the input stream from the network
I have checked the RING_BUFFER_CONNECTIVITY from sys.dm_os_ring_buffers, we are able to find the remote_host IP where connections are being closed/killed, the error being logged in sys.dm_os_ring_buffers, comes from multiple remote_host, we have raised
to O/s and Networking Team they seem to have no clue, why this error occurs
Server: Virtual Machine
Operating System: WINDOW 2008 R2 SP1
MSSQL 2008 STD ED SP3 10.0.5850.0
Database mirroring is configured for the application database.
Antivirus enable on the database server
How do we find the cause for this error being logged in SQL server logs, is this error due to SQL database mirroring or memory issue?
What needs to be checked on the O/s and Network, I have been checking on the internet and everywhere it is pointing to NIC drivers or security patches
Also in the system events following error was being logged, but after restarting the vm service this error has not re-occurred
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the VMTools service
Kindly suggest on Error 4014 Severity 20 State 16, A fatal error how to resolve
[email protected]

Hello,
Could you try to use Network Monitor or WireShark to examine if the connections resets are coming from a client computer
or from the host where SQL Server is installed?
Network Monitor can be downloaded from the following link:
http://www.microsoft.com/en-us/download/details.aspx?id=4865
If you use Network Monitor trace you will identify connection resets by looking for “TCP: Flags=,,R.A” at the description column on the Frame Summary. Once you find the flag, the Source column will tell you the identity of the host resetting the connection,
maybe is not the SQL Server host.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

How to read the text file present in the Al11 server through our program?

My requirement is that , i have one file already present in the AL11 server. Now i want to take this file so that I can read this file .
So will you please help me , how to read the file from AL11 server in our program ?
Thankx in advance

Hi..
I too agree to the above post .. SEARCH in SCN before posting..
DATA: lv_filename TYPE string, "File name
        lv_line      TYPE string. "One line entry in a file
lv_filename = iv_file_name.
IF iv_location = gc_application.
    IF iv_record_count IS SUPPLIED.
Open file
      IF gv_file IS INITIAL.
        OPEN DATASET lv_filename FOR INPUT IN TEXT MODE
                                 ENCODING DEFAULT.
                                 ENCODING DEFAULT
                                 IGNORING CONVERSION ERRORS.
        IF sy-subrc <> 0.
          RAISE file_open_error.
        ENDIF.
        gv_file = gc_check.
      ENDIF.
Read data
      DO iv_record_count TIMES.
        READ DATASET lv_filename INTO lv_line.
        IF sy-subrc <> 0.
Close file
          CLOSE DATASET lv_filename.
          IF sy-subrc NE 0.
            RAISE file_close_error.
          ENDIF.
          CLEAR gv_file.
Exit from the loop
          EXIT.
        ENDIF.
Regards
Ansari

How to read the whole text file lines using FTP adapter

Hi all,
How to read the whole text file lines when error occured middle of the text file reading.
after it is not reading the remaining lines . how to read the whole text file using FTP adapter
pls can you help me

Yes there is you need to use the uniqueMessageSeparator property. Have a look at the following link for its implementation.
http://download-west.oracle.com/docs/cd/B31017_01/integrate.1013/b28994/adptr_file.htm#CIACDAAC
cheers
James

TS4123 Error message that read " The procedure entry point salite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll."

Dear All,
I've receive a error message that read " The procedure entry point salite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll."
Due to this had cause me unable to back up my iphone. Please advice how can i reslove this.
This happens after I install Sumsung application on my PC.

Hi whatsthe77,
Welcome to Apple Support Communities.
You may want to follow the steps in this article to reinstall iTunes:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Have a great day,
Jeremy

BOL: How to read the value of an attribut

Hiii experts,
I'm new in ABAP programming.
My intention is to read the value of a context attribut.
This attribut ist not in form of a struct attribut. To read an struct attribut, I know to get the value, for example:
value ?= me->typed_context->BP_ADDR->collection_wrapper->get_current( ).
CHECK value IS BOUND.
value->get_property_as_value(
    EXPORTING
      iv_attr_name = 'CITY'
    IMPORTING
      ev_result    = value_city).
But my problem is, that I have an attribut, which you can not find in the BOL browser, because it is not in form of a struct.
Can anybody help me, how to read the value of this kind of attributs.
Thank you very much in advance fpr your help,
John

Hii Clemens,
first of all, my concern deals with WebUI.
I expect to read the value of an attribut. I know how to read the value of an attribut, which can be found with the same description in the bol browser, as you know you can read it with:
value ?= me->typed_context->BP_ADDR->collection_wrapper->get_current( ).
CHECK value IS BOUND.
value->get_property_as_value(
    EXPORTING
      iv_attr_name = 'CITY'
    IMPORTING
      ev_result    = value_city).
Now, I have an attribut of an context node which has a different name as in bol browser. If I want to read the value with the code above I get an error message. Thatswhy I referenced a collection of the context node to read this attribut.
Can anybody say me how the value of the attribut, can I use the methode get_property ?
greetings,
J

M90p - Error 0189 Cannot read the security EEPROM

Hi,
I have a Thinkcentre here that says during POST:
Error 0189 Cannot read the security EEPROM
It then prompts me to enter the BIOS, but no matter what I try, I cannot get rid of the message and boot to the OS.
What should I do?
BTW, what is the header labeled "ME_Disable" on the motherboard?
Thanks,
Smith

Hi! I with have problem 0189 Error. How to fix it? Pls.

In NodeList how to read the ERRTAB values

How to Read the NodeList ? I have an error table it has Type and message fields....
NodeList list = document.getElementsByTagName("ERRTAB");

I assume you are using XML DOM inside Java mapping. Once you got the Nodelist object initialised, get the length of the node list and run in a for loop for each Node that it has.
VJ

How to read the content in one node of XML in Java? Pls help

My dear brothers,
I am a newbie of XML, I have a exercise which is creating a Tree View from XML file. But the trouble is I do not know how to read the content in one node of XML file. I decide to use the algorithm as following:
1. Create a GUI form which gives the ability for user to choose a XML file (ok)
2. Load XML and return the file (ok)
3. Read the file from node to node to create the node in Tree View (?!)
Please help me, and if you are enough kind, please give me an small example to easy understand. Thanks in advance.
Hoang Yen Binh

I hope this one helps you.
     <ABC Type="ProductBased" ProdName="One" Location="India">
          <CEO>Raj</CEO>
          <Finance>Vikram</Finance>
          <HR>Karthik</HR>
          <Technical>Satish</Technical>
     </ABC>
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import org.w3c.dom.Document;
import org.w3c.dom.Element;
import org.w3c.dom.NamedNodeMap;
import org.w3c.dom.Attr;
import org.w3c.dom.NodeList;
import org.w3c.dom.Node;
import org.w3c.dom.DOMException;
import javax.xml.parsers.ParserConfigurationException;
import org.xml.sax.SAXException;
import java.io.File;
import java.io.IOException;
public class XmlReading {
     Document doc;
     Element element;
     public static void main(String[] args) throws Exception{
          XmlReading xr = new XmlReading();
          xr.getXmlParser(args);
     public void getXmlParser(String[] args) {
          DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
               if(args.length != 1) {
                    System.err.println("Argument Required");
          try {
               DocumentBuilder builder = factory.newDocumentBuilder();
               doc = builder.parse(new File(args[0]));
          }catch(ParserConfigurationException e1) {
          }catch(SAXException e2) {
          }catch(IOException e3) {
          getAttributes();
     public void getAttributes() {
          // Retrive the entire Document from the Dom Tree
          element = doc.getDocumentElement();
//          System.out.println(element);
          NamedNodeMap attrs = element.getAttributes();
          // Get number of attributes in the element
     int numAttrs = attrs.getLength();
     // Process each attribute
          for (int i=0; i<numAttrs; i++) {
               Node node = attrs.item(i);
               // Get attribute name and value
               String attrName = node.getNodeName();
               String attrValue = node.getNodeValue();
               System.out.println(attrName + ": " + attrValue);
          String s1 = element.getTagName();
          System.out.println(s1);
          // To get all the elements in a DOM Tree
          NodeList nl1 = element.getElementsByTagName("*");
          int i2 = nl1.getLength();
          System.out.println(i2);
          for(int i=0; i<i2; i++) {
               System.out.println(nl1.item(i) + "\n");
}

How to read the data in excel sheet

Dear sir,
How to read the data in excel sheet when i recieve a data serial communication... ie i have store a data in excel such that
Cell A Cell B
A Apple
B Ball
C Cat
D Doll
when i recieve A from serial communication i have to display Apple, and when i recieve B i have to display Ball and so on..

Hi,
I would recommend you to have a look at the VI attached. It makes use of a VI named 'Read from Spreadsheet' to read the row and column data from the tab delimited excel file. The read data is then searched for the Alphabet specified and finally returns you the corresponding string. The test file used to validate the operation of the VI is also attached.
Trust this would help you solve the issue.
Regards,
Sagar G Yadav | Application Engineer | National Instruments
Attachments:
read_from_excel.vi ‏10 KB
Book1.txt ‏1 KB

VC 7.1 SP05 unspecified error - how to read the debug trace?

Similar Messages

Maybe you are looking for