Debugger Not Always Stopping...

Hello all.
I am new to the Oracle/JDeveloper world, so I apologize if this is basic.
We are using JDeveloper 9.0.3.10.35. The application is run through an applet as the starting point. The applicatiion runs fine.
While using the debugger though, there are certain classes where the debugger will not stop. Even on simple System.out.println lines.
While running the application in debug mode (yes I confirmed that), the System.out.println data is printed to the console (using Tomcat), but the debugger is not stopping at the breakpoint.
The classes that don't work are our own classes that are built at runtime from XML files. These XML files have had their extensions changed to custom extensions depending on what action the file performs. Could this have something to do with it?
Just looking for help in if I missed something in the setup of the project.
Thanks In Advance

It's probably running anonymously. That was my issue I think. The break points don't work on anonymous execution. At least not for me. Now, you can specify to use anonymous break points.. But then it breaks at EVERY anonymous break point. I had a hard time stepping through them all to get to what I needed to see execute, before it would time out... good Luck...

Similar Messages

Firefox is very slow to respond when opening and nearly always stops responding altogether even refusing to react to Task Manager "End Program@ command. The "not responding@ error message also comes up during navigation on line.

Firefox is very slow to respond when opening and nearly always stops responding altogether, even refusing to react to the Task Manager "End Program" command. The "not responding" error message also comes up during navigation on line. Several attempt have to be made to get on line. A loss of stability seems to be endemic at the moment.

Try following the instructions here: [[Firefox hangs]]

Pages slow to load or do not load, then time out, sometimes stopping page from loading will reveal it or stopping and refreshing it, though not always.

pages will not always load or take forever, if i stop it from loading and refresh it it may load right away though not always. It is like the old days @ 33K, never used to happen, basically have all the same plugins have always had.
has been doing this for several months now, finally can't take it any more, all malware, virus, scans are clean, settings are the same for last ? years.
do get script problems from time to time but not very often.
loading say New egg, will take forever or will not completely load page, have backed up all bookmarks, etc: removed and reinstalled but no change.
any Ideas would be of great help. I have been using Firefox, since it's inception and don't want to switch browsers.
Thank You,
Mark

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

Debugger Not Stopping at Break Points

Howdy folks,
I am trying to debug a rule in which I checkout / modify / checkin a renameUser view. I set some break points at the invoke statements for checking out and checking in. The rule is called from my Update User workflow. I know the rule is executing because I am dumping the context to a text xml file. The break points are right before and after the invoke that dumps the context to xml. However, when I update someone the debugger is not breaking in and stopping the thread to let me step through it. I would really like to see why my checkin and checkout invokes are not working, but can't see the error message due to the debugger not stopping...
Does anyone have any advice, clues or ideas to get the debugger to work more correctly?

It's probably running anonymously. That was my issue I think. The break points don't work on anonymous execution. At least not for me. Now, you can specify to use anonymous break points.. But then it breaks at EVERY anonymous break point. I had a hard time stepping through them all to get to what I needed to see execute, before it would time out... good Luck...

[svn] 3459: Fix FB-14050: Watchpoints: Debugger stack does not always show correct 'Suspended' message when at a Watchpoint.

Revision: 3459
Author: [email protected]
Date: 2008-10-02 14:09:16 -0700 (Thu, 02 Oct 2008)
Log Message:
Fix FB-14050: Watchpoints: Debugger stack does not always show correct 'Suspended' message when at a Watchpoint.
Ticket Links:
http://bugs.adobe.com/jira/browse/FB-14050
Modified Paths:
flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/DManager.java
flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/DProtocol.java
flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/PlayerSession.java

Hi Experts,
After i tried a few times, i can successfully start prepare with upgrade asistant monitor - Administrator >> Start Prepare,
Thanks

[4.0 EA2] Debugger not stopping at breakpoints/not working at all

When running the debugger in SQL Developer either the debugger immediately connects then disconnects after executing the code WITHOUT stopping at breakpoints or the debugger hangs and the only actions I can choose is to terminate or to pause.
The first issue happens a lot more frequently. I am attempting to debug a procedure in a package where the there are several breakpoints throughout the code including at the very start. After checking my tables in which the procedure acts upon before and after running the debugger I can see that the data has been altered so the debugger has ran through the procedure and executed the code without stopping. I have checked this on very simple code where the breakpoint code has been called and have experienced the same result.
Im using 64bit Win7 -
JDK - 1.7.0 update 40
Output:
LOAD TIME : 329UsersCache.fillIn() time = 4 ret==null?: true
UsersCache.fillIn() time = 3 ret==null?: true
tableAlias.cardinality()==0
UsersCache.fillIn() time = 4 ret==null?: true
UsersCache.fillIn() time = 3 ret==null?: true
tableAlias.cardinality()==0
UsersCache.fillIn() time = 4 ret==null?: true
tableAlias.cardinality()==0
tableAlias.cardinality()==0
tableAlias.cardinality()==0
Debugger Output:
Connecting to the database Layout Pro.
Executing PL/SQL: ALTER SESSION SET PLSQL_DEBUG=TRUE
Executing PL/SQL: CALL DBMS_DEBUG_JDWP.CONNECT_TCP( '*****', '*****' )
Debugger accepted connection from database on port *****.
Executing PL/SQL: CALL DBMS_DEBUG_JDWP.DISCONNECT()
Process exited.
Disconnecting from the database Layout Pro.
Debugger disconnected from database.
Thanks in advance,
James

Hi
Have you compiled for debug? - Yes
Are the breakpoints definitely on code lines?- There are several lines of code which have up to 5 consecutive breakpoints
You can also set the preference Tools| Preferences|Debugger|Start Debugging Option to 'Step Into'. That should stop at the first executable line. - This worked thank you, I can now access the debugger and test my work.
On swapping the preferences back to 'Run Until a Breakpoint Occurs' (which it was originally set as) the debugger now correctly stops a the breakpoints. I didn't make any changes to the code/debugger parameters or anything so I'm rather confused to why its suddenly started working .
But anyway thank you for the help,
James

Debugger not debugging

Unfortunately, I'm using XP professional (SP1). However, I had similar problems with 2000 SP2, which is why I'm posting.
I have 9iDS R2 (Jdeveloper 9.0.2) and for some reason some of my files do not debug. I set a breakpoint on a valid Java line (as opposed to an HTML line) and the debugger doesn't stop. I've set breakpoints in other files in the same project and the breakpoints do work. Sometimes, the breakpoints work in the file after a reboot, but not always.
My messages window has the following:
C:\OraHome1\jdk\bin\javaw.exe -ojvm -XXdebug,quiet,port1259 -classpath C:\OraHome1\j2ee\home\oc4j.jar -Dorg.omg.CORBA.ORBClass=com.inprise.vbroker.orb.ORB -Dorg.omg.CORBA.ORBSingletonClass=com.inprise.vbroker.orb.ORB com.evermind.server.OC4JServer -config C:\OraHome1\jdev\system\oc4j-config\server.xml
[Starting OC4J using the following ports: HTTP=8989, RMI=23892, JMS=9228.]
Debugger attempting to connect to local process.[waiting for the server to complete its initialization...]
Debugger connected to local process.
Oracle9iAS (9.0.2.0.0) Containers for J2EE initialized
Target URL -- http://10.1.1.137:8989/reportstest/ReportParams.jsp
It looks like it thinks things are working. ...
Any ideas?
THanks
Jeff

Hi Jeff,
I don't think this is an OS problem, so (at least for now) don't worry about using Windows XP.
If you were doing remote debugging with a stand-alone OC4J, I would suspect that there was some problem with the setup of OJSP and/or that OJSP was using a java compiler other than OJC (Oracle Java Compiler), for example: javac. Since you are doing local debugging with the embedded OC4J, we can eliminate those possiblities.
You may have run into a bug in OJSP. As you may know, OJSP is responsible for converting the JSP to Java and then calling OJC to compile the java file. Part of this process includes putting lineinfo comments in the java file. OJC uses the lineinfo comments to build the line number tables when it produces the class files. The debugger then uses the line number tables to know what java code corresponds with what JSP lines.
When the debugger doesn't stop at a breakpoint in a JSP (and the breakpoint is on an executable line), the problem is probably because the line number table was not generated correctly. Is it possible for you to send me the JSP? My email is [email protected]
If it is not possible for you to send me the JSP, I would still like to investigate this problem. I can describe to you how to look at the lineinfo comments in the .java file.
-Liz

Flash Debugger not working since upgrade to FB4

I installed FB4 this morning on OS X 10.6 and have not been able to use the debugger mode since.
Whenever I start a debug session the launcher always stops at 57% waiting to connect to debugger.
I have tried uninstalled the Flash Player, restarting and installing the player again.
I have been using the flashplayer_10_plugin_debug_ub.dmg file from Adobe's site. It is dated 26 Feb 2010.
This is so annoying and has seriously soured my go with the new version. I had such high expectations too.
Anybody else had a similar problem?

Okay, rather embarrassingly, the fault was in the HTML template for the page. The Flash debugger works fine when the flash file actually runs!
My fault, and everything suddenly looks really cool again.

Anyone having same problem? I phone 4 after updating to Vers.5.1.1. battery cannot be 100% full charge, always stop at 99% and battery drains off fast too :(

Anyone having same problem? I phone 4 after updating to Vers.5.1.1. battery cannot be 100% full charge, always stop at 99% and battery drains off fast too

I had major issues with the iPhone 4s battery, however it’s resolved.
The tech who set the phone up at the Apple store did so with little training.
if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
turning of locator and the push notifications from facebook--they have a lot!

[svn] 4082: the AS3 debugger wasn' t stopping at breakpoints in frame scripts that

Revision: 4082
Author: [email protected]
Date: 2008-11-12 07:45:21 -0800 (Wed, 12 Nov 2008)
Log Message:
the AS3 debugger wasn't stopping at breakpoints in frame scripts that
contain include statements
we use the qualified error origin (in Context) for frame script module
name mapping, and when the CodeGenerator processes IncludeDirectiveNodes,
it resets the Emitter's origin, but was using Context.getErrorOrigin
instead of Context.getQualifiedErrorOrigin. it's safe to add this to
core asc (for all clients) because getQualifiedErrorOrigin just passes
through to getErrorOrigin if a qualified one isn't set (is null or
blank).
QE Notes: none
Bugs: authoring bugbase 198885
Reviewer: Erik Tierney
Modified Paths:
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/semantics/CodeGenerator.java

Revision: 4082
Author: [email protected]
Date: 2008-11-12 07:45:21 -0800 (Wed, 12 Nov 2008)
Log Message:
the AS3 debugger wasn't stopping at breakpoints in frame scripts that
contain include statements
we use the qualified error origin (in Context) for frame script module
name mapping, and when the CodeGenerator processes IncludeDirectiveNodes,
it resets the Emitter's origin, but was using Context.getErrorOrigin
instead of Context.getQualifiedErrorOrigin. it's safe to add this to
core asc (for all clients) because getQualifiedErrorOrigin just passes
through to getErrorOrigin if a qualified one isn't set (is null or
blank).
QE Notes: none
Bugs: authoring bugbase 198885
Reviewer: Erik Tierney
Modified Paths:
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/semantics/CodeGenerator.java

Gap resolution is not always happening with real time apply

Hi
I noticed a strange behavior in one of my 10.2.0.4 dataguards , and I am wondering if anyone else has encountered it :
When there is an archive gap that need to be resolved , the gap is NOT always being identified and acted upon , when the recovery is started as such :
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE DISCONNECT FROM SESSION.
its just sitting there doing nothing, and nothing is written to the alert log regarding the gap and nothing is being transferred from the primary as needed.
However, if I restart the apply , omitting the 'USING CURRENT LOGFILE' clause , the gap is identified and acted upon, as such :
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION.
At first I thought its merely due to me stopping and starting the apply process ( nothing like a "reboot" , right ? ) , but that is not the case.
if I restart , but still use the USING CURRENT LOGFILE clause , the gap is still not being identified .
Anyone had this issue ? any theories as to why that happens ?

Using Real-Time Apply to Apply Redo Data Immediately
http://docs.oracle.com/cd/E11882_01/server.112/e25608/log_apply.htm#i1022881
1.What is compatible parameter, it should be 11.1
2.Try to check parameters mentioned in below link:
http://easyoradba.com/2011/01/10/real-time-apply-in-oracle-data-guard-10g/
Regards
Girish Sharma
Edited by: Girish Sharma on Nov 15, 2012 12:37 PM

LabVIEWIOControl not always passed into VI.

Hi all,
I'm using a FileGlobal in TestStand to keep an array of LabVIEWIOControls of all the comports I am accessing in my serial application. I pass the variable into one particular VI (Communication.vi) several times throughout my test sequence, but some of the time the VISA resource name is not passed in and an "_unnamedTask< (0)" appears in the VI for the VISA resource name control on the front panel instead of the comport name (i.e. "COM1").
Of course the VI errors if it does not have a VISA reference and it reports
"VISA: (Hex 0xBFFF000E) The given session or object reference is invalid
-1073807346; User-defined error code."
However, in debug mode, when the front panel displays and the VISA resource reference is unnamed I can select the appropriate comport in the drop down and the VI works.
I'm monitoring the FileGlobal in the step settings window in TestStand, and it has the proper value, and the variable is wired to the VI and passed in through the connector pane. Why is it losing the comport value some of the time? Seems like it works for the first few VI's, (it usually trips on the second or third instance of the VI, but not always) but once the value stops getting passed, it is stuck that way until I terminate the sequence.
The test sequence is not new, but this error is new and on the heels of me upgrading from TestStand 3.5 to 4.1.
Thanks for hints. I can post .seq and vi's if needed.
Andrew
Solved!
Go to Solution.

Here is the sequence and the VI in use. TestStand 4.1/LabVIEW 8.6
Attachments:
E4-SYS-TC_R2E01.14b.seq ‏1231 KB
E4-SYS_Communication.vi ‏22 KB

Why is my iphone 4 deleting contacts automatically? They sometimes re-appear later but not always. My phone lost 1000 or so contacts today alone!

Why is my iphone 4 deleting contacts automatically? They sometimes re-appear but not always. The phone deleted 1000 or so contacts today alone!
Any suggestions?

Robert, to clarify, I have the contacts section of icloud switched off. This was done some weeks ago in an attempt to stop this phenomenon. Didn't work. At one stage yesterday I had 1400 contacts but now it has swelled to 4500. Strange!

Why do my calendars not always update 9or update right away?)

I am not sure i am following APPLE's instructions correctly as I don't get consistent results. Can someone help? Thanks.
I have the newest IPOD TOUCH. And some things I have entered on my MACs and even work PCs (me.com calendars eventually showed up on my ipod touch. Vice versa too.) Problem is that this is not consistent. I occasionally find something does not make it, especially from internet (me.com) to the IPOD.
I THINK my IPOD TOUCH settings may be the problem.
They are
PUSH--> ON
FETCH --> MANUAL
I have tried other ways, and the results are always unclear. I thought to save the battery PUSH should be off, or is it only FETCH?
I have wifi on AT HOME. But only to get mail sent to my IPOD. Out on the street and at work there IS no wifi. But anyway, on or off, it seems like I need to have my usb connector plugged in to sync. So I do that too.
SO, Calendar--> PUSH ON OR OFF? FETCH ON OR OFF? WIFI ON OR OFF?
Now Push on, wifi on.
MAC settings too are confusing. There is SYSTEM PREFERENCES and Itunes.
Here they are for my PPC G5 running 10.5.5 and Intel Macbook Pro running 10.4.4)
MOBILE ME (SYSTEM PREFERENCES)
Sync (all items checked except, on the desktop, the mysteriously named "com.panic.transmit.favorites". So that includes calendars. And set for AUTOMATICALLY.
NOTE!!
---> THIS ONE ---WAS-- SET FOR AUTO, BUT JUST NOW I SWITCHED TO MANUAL AND IT DID WORK!!
-> DOES THIS MEAN I FOUND THE SOLUTION? OR A FLUKE???
ADVANCED shows the two machines being synced
ITUNES SETTING
Contacts and Calendars are synced "OVER THE AIR" from Mobile ME. That implies wifi? But regardless, with or without, plugged in or not, I do not always get things synced.
Mail account--only have me.com. before I had the other email I use, but it seemed to create multiple instances of Mobile me on my IPOD and also multiple calendars "On my Ipod" and UNTITLED Account" So now I leave only mobile,me checked. (see below ADVANCED)
Advanced:
REPLACE INFO ON THIS IPOD.... Or, THIS may have been the culprit, so now I leave this off
So, now I am left wondering if any of my settings are less than desired. And is the syncing, when it happens, occurring over wifi or over the USB? So far, the one setting that seems to MAYBE make a difference is in SYSTEM preferences-->changing to SYCH WITH MOBILE ME MANUAL (whereas before it was AUTO).
Thanks

tokyoprogressive wrote:
Thank very much for your answer. Let me see if I understand.
I have Mobile Me (this mac account and a set of calendars: home and work)
Fairly similar to my set up.
Ok...I have PUSH ON and FETCH MANUAL. But then in ADVANCED it says MOBILE ME CONTACTS AND CALENDARS --> PUSH. And MAIL also PUSH.
Though I am not sure what this actually means. So far, I seem to get things to happen
Rule 555: if it ain't broke, don't fix it.
Stuff from Mobile Me comes down automatically. That was supposed to be Push (instant), but Apple had to admit that in reality for now, there is going to be some delay. Even so, if I time it well, mail and calendar changes arrive elsewhere as soon as I make them on the computer or the touch or even the cloud.
Some apps do not support Push, so that Manual (or the times) cover that situation.
automatically IF I have wifi on at home and the calendar app is open. In other words, do PUSH And FETCH settings work if using USB and NO WIFI (on my home computer?)
No. By selecting the Mobile Me method, the USB syncs are closed off.
This works with wifi if you have Mobile Me (but then subscribed calendars do not sync).
Ok.
You mean other things sync but not calendars? I am not sure how I actually subscribe them. I just see the same info now on the web and on my TOUCH.
Your ordinary calendars do, but those you subscribe to (for example I subscribe to a calendar that I found on a website that gives me Formula 1 schedule; and my boss at work gives me a calendar I subscribe to). My basic calendars are fine, but the subscribed calendars do not even appear in Mobile Me or on the touch.
Hm. So far with that specific computer I can ONLY get wifi and not USB. You said I can turn it off??? You mean by turing PUSH to off? So PUSH off, no sync. Push on, sync.
Right. The Sync would be via USB, but that only syncs the touch and the computer, the computer would also sync with the cloud. OK, if you only have one computer, I guess. Syncs from the touch wait until you come home and plug it in.
So turning on MOBILE ME (PUSH???) makes SYNC via USB stop working?
That is right. If you look in the information panel in iTunes when you have the touch connected, that is what is indicated.
Thanks you. As you see, I am still very foggy about this all. It seems like the USB is good for charging and Itunes stuff, but that the calendar only syncs with PUSH on and FETCH set to, so far for me, MANUAL.
You have that about right, Yes.
And yet on some of its pages Apple says you should turn off PUSH and/or FETCH to save battery life.
Right. If you are in a situation where Push is not going to work for a few hours (like on a plane, or in the middle of a desert) it makes no sense to discharge a battery unnecessarily. If you are in and out of Starbucks in the US, or somewhere that has wifi on that you can link to -- and you do update a lot, or read email -- then keep it on.
Glad to have been of help.
Graham

Lately, I've been getting a blue screen in the midst of working and have to do a cold reboot to end it. Seems to happen when I'm closing windows or quitting applications. Not always, but sporadically. What causes this? I'm using 10.6.8 on early 2011 MBP.

Lately, I've been getting a blue screen in the midst of working and have to do a cold reboot to end it. Seems to happen when I'm closing windows or quitting applications. Not always, but sporadically. What causes this? I'm using 10.6.8 on early 2011 MBP. Thanks for any help/advice!

You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
http://roaringapps.com/apps:table
Far as your Safari problem do these things until it's resolved:
1: Software Update fully under the Apple menu.
2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
https://www.mozilla.org/en-US/plugincheck/
Flash install instructions/problem resolution here if you need it.
How to install Flash, fix problems
3: Install Safari again from Apple's web site
https://www.apple.com/safari/
4: Run through this list of fixes, stopping with #16 and report back before doing #17
Step by Step to fix your Mac

Debugger Not Always Stopping...

Similar Messages

Maybe you are looking for