Debugging Personalization Issues

Hi,
While trying to hide some columns in an advanced table, I set their rendered property to FALSE at the responsibility level. At that time, it gave me an error message
Setting rendered to false may hide this item and its children. The application may be inoperable if this item or any of its children is required. Hiding the result area of a query region will cause an error.
But it allowed me to save the change. However, probably because of this change I don't see any data in the table. I reverted all the changes, but still no luck.
If I turn personalization off, it works fine (i see all the data). How can i identify the personalization specific to this table? I have other personalizations that are on the same page and at the same level.
SQL> execute jdr_utils.listcustomizations('/oracle/apps/ap/oie/webui/OIEMAINPAGE');
/oracle/apps/ap/oie/webui/customizations/function/OIEMAINPAGE/OIEMAINPAGE
/oracle/apps/ap/oie/webui/customizations/site/0/OIEMAINPAGE
/oracle/apps/ap/oie/webui/customizations/responsibility/22918/OIEMAINPAGE
From Functional Admin resp:
/oracle/apps/ap/oie/entry/summary/webui/customizations/function/OIEENTRYFLOW/ConfirmationPG 30-August-2007
/oracle/apps/ap/oie/entry/summary/webui/customizations/org/2242/ConfirmationPG 30-August-2007
/oracle/apps/ap/oie/entry/summary/webui/customizations/responsibility/22918/ConfirmationPG 30-August-2007
/oracle/apps/ap/oie/entry/summary/webui/customizations/site/0/ConfirmationPG 30-August-2007
/oracle/apps/ap/oie/webui/customizations/function/OIEMAINPAGE/OIEMAINPAGE 30-August-2007
/oracle/apps/ap/oie/webui/customizations/responsibility/22918/OIEMAINPAGE 30-August-2007
/oracle/apps/ap/oie/webui/customizations/site/0/OIEMAINPAGE 30-August-2007
How can I find what the above customizations actually do?
Any pointers?
Ashish

Use jdr_utils to print the customizations which you have listed. That will tell you what exactly any particular personalization is doing.
--Shiv

Similar Messages

Dock application gets killed itself on Lion, how to debug this issue?

Hi, Dock application gets killed itself and it dissappears and relaunches itself after for few seconds, This is happening for every 5 min or so. it is quite annoying problem. how to debug this issue? any help?

When I look the system logs - there is an exception each time I try to run the application or open a window:
9/5/09 10:33:12 PM Linear[23545] Cannot create BOOL from object <Regression: 0x1461f0> of class Regression

For tablet touch is very slow in firefox OS. Some times it is hanging. While dialing number to call it taking to much time. How to fix and debug this issue.

For tablet touch is very slow in firefox OS. Some times it is hanging. While dialing number to call it taking to much time. How to fix and debug this issue. Waiting for your reply.

Hi sb00349044,
I'm sorry to hear that you are having problems with your Firefox OS device. Can you please specify the device Model and Version?
If your device is one of the Firefox OS Tablets from the contribution program, please be aware that those builds are still being improved and ironed out. If that is the case, please follow the guidelines for the contributor program to report issues with the device.
Thanks,
- Ralph

Report personalization issue..

Hi Experts,
We have published our few reports which are orignially created in Query designer in our BW portal using the WAD iviews. We have a issue that when we choose "Personalize Web application" for a report then same reports opens up every time even if we choose to open different report.
Can any one please suggest why it is happening!
Thanks
VV

Please see below link if you need to remove the personilsation:
Page not displaying iviews
It works on the same priciple as your issue.
Thanks,
Em

Personalization Issue in Task Summary Page

My client is trying to add a new column in the Cost Details table in the Task Summary page (Under Project Performance Reporting in PJT) through personalization. They are on 11i.PA.RUP3 (Screen shot in the attachment).
They have an extended VO which basically is based on the standard Oracle VO with few additional attributes. My client is able to add the column, view the data which was displayed but that newly added column does not appear in the list of available columns when they try to create a personalized view either by duplicating the seeded views like ITD and PTD or from the scratch.
This works absolutely fine in R12, but in 11i, we are having this problem. Does any one can comment, if this is a bug in the product? or is there any patch already available for this?
Many thanks,
Devasish
[[email protected]]
Edited by: user11268976 on Aug 28, 2009 10:06 PM

Ranjit,Thanks for your reply.
I am also facing this same issue.
I just want to know that if userA creates one view,Can userB see this view which is created by userA?
Because in our case what happens when we click on Personalize button,we can see 5 views and all r not able to update.
but when we got from Functional Administrator responsibility and search for this page and Click on User Seeded Views,we can see only 4 views and all are updatable.
I just want to know how can we delete/update fifth view which is only we can see when we click on Personalize button?
Regards
Hitesh

OA - Personalization issue

In IProcurement -> Shopping cart -> view cart
We have done one form personalization on Item Description to make the read only to false. (Updatable)
Issue is the item description is 240 character length filed. But after making the filed updatable we can see only about 30 characters at a time. (Need to scroll to see the entire text ).
But this is not desirable . How can see the updatable filed in full length ? When it is read only I can read the text properly (It is coming full)
Please help.
Thanks,.

Sorry if the question is very basicNot a problem my friend.
The approach which I mentioned above is using personalization only. Anyway bit detailed explanation:
1. keep renderd property to true of the Description item
2. create new message text input item using personalization with same prompt, view instance and view attribute as of the Description item
3. For new item keep maximum length 240
4. For new item keep hieght and width values as required(i.e. to make it look good in the page) e.g. hieght - 4, width -10
Let us know if you need any furthur clarifications.
-Anand

Workflow Cancelled - How to debug the issue

Friends,
We have implemented deployed servers in ep4 successfully in the past. Recently, we upgraded our system to ep5 sp4. Since then we have issues on workflow WS17900036 ( Accoutning ) and WS17900039 ( maintenance ).
Without giving you details of the business process and the flow, I ask you how can I anaylze why the workflow is cancelled. Can you provide some methods, function module specially or in general that I can debug to see the issue?
Any insight or a general guidance would be greatly appreciated.
Thank you kindly
William

HI william,
Use the below link to debug the work flow, the link contains some document, i hope you can solve the issue with this.
http://www.dataxstream.com/wp-content/uploads/DataXstream-Workflow-Troubleshooting-Guide.pdf
B&R,
Saravana.S

Debug COLLECTION ISSUES

If have created a proto type with collections mostly to gain experience with them. What I found difficult was debugging issues.
In the pl/sql processes I placed an htp.p statemnent to assist debuging but they don't print out. Only the success or error msg for the process prints out. How can you print out degbug messages interlaced within the pl/sql code?

Always provide the information requested in the FAQ and forum sticky threads, especially:
- APEX version
- DB version and edition
- Web server architecture (EPG, OHS or APEX listener)
- Browser(s) used
- Theme
- Templates
- Region type
APEX provides its own debugging features (generally better than <tt>htp.p</tt>). However, these changed significantly in APEX 4.0—which is why it is necessary to know what version you are using.
In APEX 4.0, there is an entire chapter of the documentation devoted to debugging, which is obviously a good place to start.
With respect specifically to collections, see the sections on Reviewing Session State, as the current state of collections can be seen in the Session State viewer, and also Accessing Debugging Mode. Using the latter feature, custom debug log messages can be added to PL/SQL code using the <tt>apex_debug_message.log_*</tt> API methods, as you were seeking to do using <tt>htp.p</tt>.

Forms Personalization Issues / Urgent help

Hello Oracle Gurus,
I have an issue while customizing the Customer Standard Form in Oracle Applications using Forms Personalization.
Issue descritption:
1) In Customer Standard Form (ARXCUDCI), at Bill-to Site level i need to disable the buttons NEW and OPEN for a custom responsibility.
I have written code in Trigger Event "WHEN-NEW-FORM-INSTANCE" and in actions i mentioned as
1. Property - Object Type as Item
Target Object as CTRL.ADDR_SU_NEW
Property Name as Enabled
Value as False
2. Property - Object Type as Item
Target Object as CTRL.ADDR_SU_OPEN
Property Name as Enabled
Value as False
When i check, it is working for the NEW button (i.e. NEW button getting disabled) but the same is not working for OPEN button.
Am i missing any thing else.........Any suggestions are highly appreciated.
Thanks & Regards,
Lakshmi Kalyan Vara Prasad.

I would guess that the problem with the Open button is that there is existing standard code within the form that runs after the WHEN-NEW-FORMS-INSTANCE trigger that enables/disables the Open button based on some other condition.
Apart from opening up the form in Forms Builder and working through the code to work out what standard code is doing this (which can be an extremely painful process), I would suggest that you try moving your personalisation to a later event, such as WHEN-NEW-BLOCK-INSTANCE.

Personalization Issue

Hii Experts,
I am facing some issue related with the form personalization, i dont want user to cancel the invoice from the action button, and along with that he should also get the message, that " You are not authorised user to cancel the invoice"
How to do that pls help me.
Thanks
Atul

Have you gone through the forms personalization docs?
Information About the Oracle Applications Form Personalization Feature in 11i (Doc ID 279034.1)
How To Do Forms Personalization (Doc ID 468657.1)
Form Personalizations in Oracle E-Business Suite (Release 12) (Doc ID 395117.1)
Form Personalization in OPM forms. (Doc ID 797823.1)
Limitations of Forms Personalization (Doc ID 420518.1)
What is the issue you have? And, what is the application release?
Thanks,
Hussein

Personalization Issue in Webui

Hi Experts,
Previously I had posted a thread Error in Quotations (Posted on 28th Dec 2010).
Quotation details(Overview page for Quotations) of 2 specific Quotations could not be viewed in Webui using one login-user id.
But it can be viewed by another user.
Eventually, this problem was solved by executing the report BSP_DLC_DELETE_PERSONALIZATION .
Obviously, this report will delete all the Personalization data , which can be reset to default by the user manually.
Now, another issue arises. That is, as soon as any personalization is done the problem is back ( Quotation details could not be viewed for the 2 Quotations ) unfortunately !
Could anyone propose a solution for this problem?
It will be very useful, if you give your valuable Suggestions. Thanks in Advance:)
Regards
Karthikeyan

Hi Shobhit,
First of All, Thanks very much for your valuable suggestions : )
But, now the problem is only with a field Creation type of Assignment block Items in the Overview page of Quotations.
Eventhough when the Field Creation type in AB Items is moved from Available Columns to Displayed Columns through "Personalization" and Saved, it is not being displayed.
When we go back to Result List and click on Quotation Id(Hyperlink), Overview page is not being displayed.
For more Information regarding this Thread, Please go to the Thread Personalization Error in Quotations (Posted by Karthikeyan on 3rd Jan 2011).
Please let me know, if you have any findings.
Thanks in Advance
Regards
Karthikeyan

Debugging Smartform Issue

Hi Experts,
DO you have any experience where you cannot debug the smartform? I already tried having BREAK-POINT in the SMARTFORM itself or having the break-point on the Print Program.
I tried the SMARTFORM TRACE and it was working, as I can see the smartform I am using that is btw a custom delivery smartform. I already put debug program RLE_DELNOTE in the CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME' but still not debugging. Any suggestions?

Ok let me check:
Driver Prg : RLE_DELNOTE - this is correct
Form : Z18_SD_F_0003 - this is correct
Routine: ENTRY
Print Medium: Print Output
Application Area: V2
I believe you could able to debug any other ABAP objects, say an ABAP program in se38. - Yes I can debug any program, authorized
Lets have the check list to look into
1) Is the Application Area , output type , Processing routine , Medium assigned is correct. Even the Print Program. Hope you did this check else can you come up with. as some times there is a possibility of assigning to wrong Application area(would have assigned the same at multiple places). - Checked as above
2) Check the right Output type was selected while printing the document through the respective transaction - Checked in NACE with Output Type ZDO3 with the above settings and also in the Delivery Output Header assigned with ZD03
3) Did you placed the Static breakpoint inside the Node "Program Lines" in the form. - Yes with BREAK-POINT
4) Hope you place the Breakpoin the respective FORM Routine of the Driver Program.(here you should be sure called if the breakpoint is in the right Routine (which you can find in NACE assignement under the same line "Medium" ). - Yes Under the Routine ENTRY, I placed a break-point
I checked with BASIS and they are doing a copy to the same system, QAS and it occured some errors, I cannot somehow relate it to this issue but there are some other abnormal issues.
Edited by: Cecilio Cruz II on Jul 22, 2011 9:27 AM
Edited by: Cecilio Cruz II on Jul 22, 2011 9:31 AM

EXCEPTION_ACCESS_VIOLATION , How we can debug this issue

I am getting EXCEPTION_ACCESS_VIOLATION rarely while working on the application, How do I can track where it happens & what are the possibilities that cause this error, I am using some of the JNI calls in my application ,is bcoz of this ,How do I rectifies the problem ,it will be greatly appreciable if get some reply on it, Thanks in advance
# An unexpected error has been detected by HotSpot Virtual Machine:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x00000001, pid=2524, tid=2944
# Java VM: Java HotSpot(TM) Client VM (1.5.0_06-b05 mixed mode)
# Problematic frame:
# C 0x00000001
--------------- T H R E A D ---------------
Current thread (0x00a3bd10): JavaThread "008^52" [_thread_in_native, id=2944]
siginfo: ExceptionCode=0xc0000005, reading address 0x00000001
Registers:
EAX=0x0ac65a18, EBX=0x0accc638, ECX=0x199a41e8, EDX=0x000020a0
ESP=0x1983f428, EBP=0x1983f4d0, ESI=0x199a41e8, EDI=0x199a41e8
EIP=0x00000001, EFLAGS=0x00010206
Top of Stack: (sp=0x1983f428)
0x1983f428: 6d0c135e 00a3bdd0 6d0c6f11 1983f4d0
0x1983f438: 00a3bdd0 1983f4b0 00000000 199a41e8
0x1983f448: 00000000 6d0c7f93 6d0c7fee 00000200
0x1983f458: 00000001 02a7a548 02a7a548 00a3bd10
0x1983f468: 06f05798 03006710 1983f490 030d9218
0x1983f478: 02a7a548 030cb040 1983f4b8 00b2ec2f
0x1983f488: 00000000 030d9218 1983f4b0 00b186a1
0x1983f498: 03006cb8 06f05798 1983f45c 1983fbe4
Instructions: (pc=0x00000001)
0xfffffff1:
Stack: [0x19800000,0x19840000), sp=0x1983f428, free space=253k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C 0x00000001
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
J sun.awt.windows.WComponentPeer.nativeHandleEvent(Ljava/awt/AWTEvent;)V
J sun.awt.windows.WComponentPeer.handleEvent(Ljava/awt/AWTEvent;)V
J java.awt.Component.dispatchEventImpl(Ljava/awt/AWTEvent;)V
J java.awt.Container.dispatchEventImpl(Ljava/awt/AWTEvent;)V
J ocuweb.client.viewkit.VMisc.setBusyCursor(Ljava/awt/Container;I)V
J ocuweb.client.viewkit.VMisc.setBusyCursor(Ljava/awt/Container;I)V
J ocuweb.client.viewkit.VMisc.setBusyCursor(Ljava/awt/Container;I)V
J ocuweb.client.viewkit.VMisc.setBusyCursor(Ljava/awt/Container;I)V
J ocuweb.client.viewkit.VMisc.setBusyCursor(Ljava/awt/Container;I)V
J ocuweb.client.viewkit.VMisc.setBusyCursor(Ljava/awt/Container;I)V
j ocuweb.client.viewkit.VFrame.setBusy()V+34
j ocuweb.client.viewkit.VFrame.SendMessageAndReceiveMessage(Locuweb/msg/MsgGeneral;)Locuweb/msg/MsgGeneral;+1
j ocuweb.client.TestSessionFrame.testFinished()V+146
j ocuweb.client.StatusPanel.update(Locuweb/msg/Notifier;Ljava/lang/Object;)V+4296
j ocuweb.msg.Notifier.callUpdate(ILjava/lang/Object;)V+71
J ocuweb.msg.Notifier.notifyConcerneds(Ljava/lang/Object;)V
j ocuweb.msg.NotificationThread.run()V+175
v ~StubRoutines::call_stub
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
0x0ad916b0 JavaThread "TimerQueue" daemon [_thread_blocked, id=1508]
=>0x00a3bd10 JavaThread "008^52" [_thread_in_native, id=2944]
0x0ace2dc8 JavaThread "007}52" [_thread_in_native, id=4068]
0x0ad813e0 JavaThread "AWT-EventQueue-0" [_thread_in_native, id=2464]
0x0ad791a8 JavaThread "AWT-Windows" daemon [_thread_in_native, id=2412]
0x0ad78e60 JavaThread "AWT-Shutdown" [_thread_blocked, id=2652]
0x0ad4fbc8 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=2632]
0x0ad5e878 JavaThread "003^53" [_thread_blocked, id=2628]
0x0ad5d948 JavaThread "002}53" [_thread_in_native, id=2620]
0x00356650 JavaThread "DestroyJavaVM" [_thread_blocked, id=412]
0x0acbddb8 JavaThread "Thread-0" daemon [_thread_blocked, id=2308]
0x00a2c6f0 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=508]
0x00a2b360 JavaThread "CompilerThread0" daemon [_thread_blocked, id=2240]
0x00a2a688 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=2100]
0x00a215f0 JavaThread "Finalizer" daemon [_thread_blocked, id=2072]
0x00a20158 JavaThread "Reference Handler" daemon [_thread_blocked, id=268]
Other Threads:
0x00a1bfb8 VMThread [id=2068]
0x00a28d68 WatcherThread [id=2556]
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
def new generation total 576K, used 140K [0x02a70000, 0x02b10000, 0x02f50000)
eden space 512K, 15% used [0x02a70000, 0x02a837b8, 0x02af0000)
from space 64K, 97% used [0x02b00000, 0x02b0f920, 0x02b10000)
to space 64K, 0% used [0x02af0000, 0x02af0000, 0x02b00000)
tenured generation total 5008K, used 2737K [0x02f50000, 0x03434000, 0x06a70000)
the space 5008K, 54% used [0x02f50000, 0x031fc488, 0x031fc600, 0x03434000)
compacting perm gen total 9472K, used 9274K [0x06a70000, 0x073b0000, 0x0aa70000)
the space 9472K, 97% used [0x06a70000, 0x0737e8f0, 0x0737ea00, 0x073b0000)
No shared spaces configured.
Dynamic libraries:
0x00400000 - 0x0040c000      C:\Program Files\INTAS_Client_TST\jre1.5.0_06\bin\javaw.exe
0x7c900000 - 0x7c9b0000      C:\WINNT\system32\ntdll.dll
0x7c800000 - 0x7c8f4000      C:\WINNT\system32\kernel32.dll
0x77dd0000 - 0x77e6b000      C:\WINNT\system32\ADVAPI32.dll
0x77e70000 - 0x77f01000      C:\WINNT\system32\RPCRT4.dll
0x77d40000 - 0x77dd0000      C:\WINNT\system32\USER32.dll
0x77f10000 - 0x77f57000      C:\WINNT\system32\GDI32.dll
0x77c10000 - 0x77c68000      C:\WINNT\system32\MSVCRT.dll
0x6d670000 - 0x6d804000      C:\Program Files\INTAS_Client_TST\jre1.5.0_06\bin\client\jvm.dll
0x76b40000 - 0x76b6d000      C:\WINNT\system32\WINMM.dll
0x6d280000 - 0x6d288000      C:\Program Files\INTAS_Client_TST\jre1.5.0_06\bin\hpi.dll
0x76bf0000 - 0x76bfb000      C:\WINNT\system32\PSAPI.DLL
0x6d640000 - 0x6d64c000      C:\Program Files\INTAS_Client_TST\jre1.5.0_06\bin\verify.dll
0x6d300000 - 0x6d31d000      C:\Program Files\INTAS_Client_TST\jre1.5.0_06\bin\java.dll
0x6d660000 - 0x6d66f000      C:\Program Files\INTAS_Client_TST\jre1.5.0_06\bin\zip.dll
0x6d000000 - 0x6d167000      C:\Program Files\INTAS_Client_TST\jre1.5.0_06\bin\awt.dll
0x73000000 - 0x73026000      C:\WINNT\system32\WINSPOOL.DRV
0x76390000 - 0x763ad000      C:\WINNT\system32\IMM32.dll
0x774e0000 - 0x7761d000      C:\WINNT\system32\ole32.dll
0x6d4c0000 - 0x6d4d3000      C:\Program Files\INTAS_Client_TST\jre1.5.0_06\bin\net.dll
0x71ab0000 - 0x71ac7000      C:\WINNT\system32\WS2_32.dll
0x71aa0000 - 0x71aa8000      C:\WINNT\system32\WS2HELP.dll
0x71a50000 - 0x71a8f000      C:\WINNT\System32\mswsock.dll
0x76f20000 - 0x76f47000      C:\WINNT\system32\DNSAPI.dll
0x76fb0000 - 0x76fb8000      C:\WINNT\System32\winrnr.dll
0x76f60000 - 0x76f8c000      C:\WINNT\system32\WLDAP32.dll
0x76fc0000 - 0x76fc6000      C:\WINNT\system32\rasadhlp.dll
0x662b0000 - 0x66308000      C:\WINNT\system32\hnetcfg.dll
0x71a90000 - 0x71a98000      C:\WINNT\System32\wshtcpip.dll
0x5ad70000 - 0x5ada8000      C:\WINNT\SYSTEM32\uxtheme.dll
0x73760000 - 0x737a9000      C:\WINNT\system32\ddraw.dll
0x73bc0000 - 0x73bc6000      C:\WINNT\system32\DCIMAN32.dll
0x73940000 - 0x73a10000      C:\WINNT\system32\D3DIM700.DLL
0x6d240000 - 0x6d27d000      C:\Program Files\INTAS_Client_TST\jre1.5.0_06\bin\fontmanager.dll
0x63000000 - 0x63014000      C:\WINNT\system32\SynTPFcs.dll
0x77c00000 - 0x77c08000      C:\WINNT\system32\VERSION.dll
0x74720000 - 0x7476b000      C:\WINNT\system32\MSCTF.dll
0x6d4e0000 - 0x6d4e9000      C:\Program Files\INTAS_Client_TST\jre1.5.0_06\bin\nio.dll
0x605d0000 - 0x605d9000      C:\WINNT\system32\mslbui.dll
0x77120000 - 0x771ac000      C:\WINNT\system32\OLEAUT32.DLL
0x7c9c0000 - 0x7d1d5000      C:\WINNT\system32\shell32.dll
0x77f60000 - 0x77fd6000      C:\WINNT\system32\SHLWAPI.dll
0x773d0000 - 0x774d3000      C:\WINNT\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.2982_x-ww_ac3f9c03\comctl32.dll
0x5d090000 - 0x5d12a000      C:\WINNT\system32\comctl32.dll
0x74e30000 - 0x74e9c000      C:\WINNT\system32\RICHED20.DLL
VM Arguments:
java_command: ocuweb.client.Client -h intastst.uswc.uswest.com -p 15551 reserve-host intastst.uswc.uswest.com reserve-port 15551 -b cmd /c start help-url http://intastst.uswc.uswest.com/TST tooltip on log-filename C:\Program Files\INTAS_Client_TST\view.log log-level 50 -validateXML Y
Launcher Type: SUN_STANDARD
Environment Variables:
CLASSPATH=.;C:\Program Files\Java\j2re1.4.2_04\lib\ext\QTJava.zip
PATH=C:\WINNT\SYSTEM32;C:\WINNT;C:\WINNT\SYSTEM32\WBEM;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\NetManage\RUMBA\System;C:\Program Files\NetManage\RUMBA\
USERNAME=lsnavel
OS=Windows_NT
PROCESSOR_IDENTIFIER=x86 Family 15 Model 2 Stepping 9, GenuineIntel
--------------- S Y S T E M ---------------
OS: Windows XP Build 2600 Service Pack 2
CPU:total 1 family 15, cmov, cx8, fxsr, mmx, sse, sse2, ht
Memory: 4k page, physical 523632k(58884k free), swap 1278412k(838760k free)
vm_info: Java HotSpot(TM) Client VM (1.5.0_06-b05) for windows-x86, built on Nov 10 2005 11:12:14 by "java_re" with MS VC++ 6.0

Try running with java.exe (instead of javaw.exe), and the command line option "-Xcheck:jni". This option causes the JVM to do additional sanity checking for JNI calls. The output can often point you in the right direction if it's a native code issue.

Customization/personalization Issue hidding oaf "subTabs"

Hi Gurus,
I have problem with this oracle applications customization, I have an OASubTabLayoutBean, depending to the input params, I have to show/hide some subTabs, in another projects I just have to do:
OASubTabLayoutBean tab = (OASubTabLayoutBean)pageContext.getPageLayoutBean().findIndexedChild("MySubTabLayout");
tab.hideSubTab(0, true); // hide
tab.hideSubTab(1, true); // hide
tab.hideSubTab(2, false); // show
tab.hideSubTab(3, true); // hide
But this doesn't work right now, I ran the application and the result is just the page shows all the subTabs without showing any error on the Log, and when it debug it, execute the command lines fine.
what can i do to force to hide these subtabs regions? please help me
Best Regards,
Mentor
here's my code:
Note:
Like I said before, this is an OAF customization, so as you can see on the processrequest this one is extending from the original controller
/*===========================================================================+
|   Copyright (c) 2001, 2005 Oracle Corporation, Redwood Shores, CA, USA    |
|                         All rights reserved.                              |
+===========================================================================+
| HISTORY                                                                  |
+===========================================================================*/
package xxdi.oracle.apps.eam.toolbelt.webui;
import oracle.apps.eam.toolbelt.webui.WorkOrderDetailsPGCO;
import oracle.apps.fnd.common.VersionInfo;
import oracle.apps.fnd.framework.OAApplicationModule;
import oracle.apps.fnd.framework.OAViewObject;
import oracle.apps.fnd.framework.webui.OAPageContext;
import oracle.apps.fnd.framework.webui.beans.OAWebBean;
import oracle.apps.fnd.framework.webui.beans.layout.OASubTabLayoutBean;
import oracle.jbo.Row;
* Controller for ...
public class XxdiWorkOrderDetailsPGCO60 extends WorkOrderDetailsPGCO
public static final String RCS_ID="$Header$";
public static final boolean RCS_ID_RECORDED =
        VersionInfo.recordClassVersion(RCS_ID, "%packagename%");
   * Layout and page setup logic for a region.
   * @param pageContext the current OA page context
   * @param webBean the web bean corresponding to the region
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
    super.processRequest(pageContext, webBean);
     OAApplicationModule am = pageContext.getApplicationModule(webBean);
      OAViewObject voWOCreateUpdateVO = (OAViewObject)am.findViewObject("WorkOrderDetailsVO");
      String rowStatus = "";
      if (true) {
          if (true) {
              Row row = voWOCreateUpdateVO.getRowAtRangeIndex(0);
              if(true)
                pageContext.putSessionValue("AssetGroup",row.getAttribute("AssetGroup").toString());
                rowStatus = row.getAttribute("SystemStatus").toString();
                if ("4".equalsIgnoreCase(rowStatus))
                    HideOptions(pageContext, webBean);
   * Procedure to handle form submissions for form elements in
   * a region.
   * @param pageContext the current OA page context
   * @param webBean the web bean corresponding to the region
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
    super.processFormRequest(pageContext, webBean);
    private void HideOptions(OAPageContext pageContext, OAWebBean webBean) {
        OASubTabLayoutBean tab = (OASubTabLayoutBean)pageContext.getPageLayoutBean().findIndexedChild("WorkOrderSubTabs");
        tab.hideSubTab(0,true);
        tab.hideSubTab(2,true);
        tab.hideSubTab(3, false);
        tab.hideSubTab(1, true);

You're in the wrong forum. Is this better suited here OA Framework ?
Thanks
-Jorge

Forms Personalization issue - Default GRE on Tax Balances form

Hi -
Since we have only 1 GRE in our HRMS system, I am trying to populate ( basically default) the GRE name on the GRE field of the Tax Balances form.
I chose when new form instance and in the action i am setting the value of field TAXSEL.GRE = 'Name of GRE'
So, when I open the form, it looks like it is successfully able to populate the field with the name of the GRE, but then it opens up the find person window where you need to enter the name of the employee whose tax baalnce you want to view. When I enter the name of the employee, the GRE field automatically dis-appears. So it defeats the purpose of the personalization.
Has anyone tried this kind of personalization ? or any insights will be greatly appreciated.
Regards
Tushar

Dear Tushar,
try the following:
1 - Help --> Diagnostic --> Custom Code --> Show Custom Events.
2 - repeat the failing scenario
3 - see which event on wich item is making GRE field dis-appearing
4 - set your custom code on the event after the one identified in 3
hope this help
Giuseppe

Debugging Personalization Issues

Similar Messages

Maybe you are looking for