Debugging the user exit in ECC

hi
we have enabled ATP check in system. when we create a sales order in ECC the call goes to SCM and it creates the purchase requisition in ECC. we need to capture this purchase requisition number somewhere when we create the sales order. we figured out several user exits that are called during CIF transfer for example in ECC system
EXIT_SAPLCPUR_001
EXIT_SAPLMEPI_001
EXIT_SAPLMEPI_002
EXIT_SAPLMEPI_003
EXIT_SAPLMEPI_004
EXIT_SAPLMEPI_005
EXIT_SAPLMEPI_006
EXIT_SAPLMEPI_007
but when i put a session/external break point nothing happens. it does not stop. any suggestions
thanks
sankar

If you are trying to set the breakpoint inside the user exit FM ,then the breakpoint will be caught only if an active project exists.
Try putting a breakpoint outside the user exit FM at some statement.
Also when you get into the debugger, activate the "update debuggeR"
Hope this helps!

Similar Messages

Can we debug the USER EXITs

Hi,
This is Krishna. Can we Debug the User exits. If possible, how to debug and what r the user exits can we debug.
If any one knows, pls help me.
Thanx in advance.
Regards,
Krishna.

Hi,
Write one of these statements in ur user exit code.
break-point
or
break <URID>
Thanks
mahesh

To check the user exit

Hi,
I want to debug the user exit EXIT_SAPLIPW1_001.Can anyone tell me how to do this?

Hi,
First check if the exit is implemented. There will be an include program inside this Function module. Check if the program is created and activated.
Then put a break-point in that include and execute the transaction. This will enable you to debug the exit.
thanks and regards,
Lakshmi.

Migration of the User exits and reports to new ECC 6.0 from 4.6c

Hello Everyone,
we have lot of user exits and menu exits in 4.6c system... now we are implementing new ECC6.0 without much changes in Business process(as is)... my question is...is it possible to bring all the user exits reports and smartforms to new ECC6.0 using some transport mechanism...or do we need to copy and paste(upload and download) from the old system....
regards,
Gayatri Gaddam.

Gayatri,
check the fallowing similar link
https://forums.sdn.sap.com/click.jspa?searchID=1744490&messageID=3040343
~~Guduri

How to know where the user exits or enhancement used in standard sap code?

Hi
I m pretty new to abap.
How can I know where the user exits or enhancement used in standard sap code?
As i have to add some functionality to the standard sap code. I m looking to search the enhancement or user exits used in this standard code wher i can add my functionality.
thanks in advance.
Moderator message : Search for available information, thread locked.
Edited by: Vinod Kumar on Oct 19, 2011 2:38 PM

Hi Henry,
I don't think this is the easiest way to look at the code around a particular field on the screen. Debugging standard programs also can be very tedious, if not impossbile. So, instead of this question, I would like to find out exactly what you want to do if you know the code.
If you are in a transaction and you want to know where the code of a particular field is, the fastest way to get to it is by pressing the F1 key on the field and then press the Technical info button on the help screen. In here you will typically see the same kind of information but it is very specific to the field you selected.
PROGRAM(SCREEN) tells you which program is manipulating the main screen, in which your field is embedded. Remember your field may be included in a sub-screen and that subscreen may be the one included in the main screen.
PROGRAM(SUB SCREEN) tells you which program is directly responsible for the field on the subscreen it is included in. This is where you should find the code most appropriate for the field, but not necessarily.
PROGRAM(GUI) controls how your push buttons and the menu options in the screen behave and controlled.
Srinivas

How to find the user exits and BADIS from SPRO

Hi all,
please let us know how to find the User exits or BADIS for an application from SPRO.
Regards,
Madhavi

Hi Varisetty,
Finding user exits and BAdis from SPRO can be cumbsersome. In most instances you know the standard SAP program and want to check (find) an exit called in the flow of the transaction. You can do this as follows:
For User Exit:
Put "/h" in the command box (to start debugging)
Execute your transaction
When you enter debugging - put a breakpoint at statement
CALL CUSTOMER-FUNCTION
the control will stop at all calls to User Exits
For BAdi (it's simpler)
Go to class CL_EXITHANDLER in SE24
Enter method GET_INSTANCE
Put a breakpoint in this method
Run your standard transaction - control will stop at all BAdis called within the flow since this method is used to check BAdi implementations before invoking them
Also, if you want to find enhancements by package - go to SE80, enter the package and check function groups starting with X - those contain function exits (conventional user exits). For BAdis in a package, there is normally a separate tree node (under the package) for Enhancements hence clearly identifiable.
Cheers,
Adi

Debug an USER-EXIT which is present inside an INCLUDE

Hi folks,
i want to debug a include ' LVEDFF0E.' which is present in the program 'SAPLVEDF.
my user exit 'ZXEDFU02' is present in the include LVEDFF0E . This exit is to change the IDOC segmants.
i want to debug my user exit which is present inside a include.i tried so many times but control is not going to that point.
can anybody tell me how to debug that exit???
correct answers will be rewarded.
Thanks & Regards

Hi,
Try this way
/h> choose "breakpoints" from menu> breakpoint at >function module> enter EXIT_SAPLVEDF_002 and press enter press f8
a®

Accessing Global data in the User exits.

Dear All,
I want to change some fields by using the user exit "EXIT_SAPLPC61_001" for Tcode ( 1KEK ) The fields which I wanted to access are global variables, so I couldnt able to access it .so I used field symbol and did the change ,by calling (SAPLPC61)t_fod[] .
But Once I change the fields and put the record back to its memory , it just posting only 2 records instead of 50 records ..
What I understood while debugging is, it starts the first loop and goes to user exit and change the global variable values , once the value gets changed instead of going to second loop , the loop ends ..
we got fifty records but it just shows only 2 records as posted .
Just throw me some lights on this issue
Thanks
Vivek.

Hi VRMan,
I do not think it's possible to use Global Variables or Functional Globals in custom Express VIs. Is there a reason why you might want to use global variables/functional global in Express VI that you've created? Perhaps you want to try just passing data to the Express VI through the connector block.
Regards,
Stanley Hu
National Instruments
Applications Engineering
http://www.ni.com/support

How to create User Exits in ECC 6

Hi Experts,
good day, i'm looking for any notes or learning materials on how to create User Exits in ECC 6. please send me the links.
thanks you for your usual support.

Hello,
For information on Exits, check these links
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
Any Basics u wana know abt Enhancements.,.,go through the link.,
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
Thanks,
Swati

Debugging a User Exit

Hi
I would like to debug a program, and locate and fix an error in one of the user exits. How can I go about doing this?
Please help to solve this.
Regards
Radha

Hi,
Enhancement/Modifications
1) Execute tcode SMOD to find available enhancement/modifications.
2) Create a project for the enhancement in tcode CMOD.
3) You must activate your project first in order to hit a break-point or get into debug mode for your existing enhancements/modifications, if you do not, the best you will be able to do is step through the main program until you hit the call for that particular customer enhancement.
4) To get into debug, you can enter a hard break-point in the enhancement itself, set a soft break-point with the stop sign, or the long way, before you execute your transaction or while you are in your transaction, you can place a /h in the ok code area (this is the area of your gui where you can type in a tcode). Once you have the /h, hit enter and that will take you into debug, from there, you can do many different things to find exactly what you are looking for.
User Exits
1) Identify the main program you want to locate a user exit/debug.
2) For example, go to SE80 and do a search by program or dev class (SAPMV45A sales order or Dev Class VMOD, most SD user exits are in this dev class). In SE80 if you go by program, most user exit programs end in a 'Z' on a rare occasion 'X' or 'Y'.
3) If you are looking at including MV45AFZZ, you can see where there are different forms. These forms will get called at times within the program. If you are looking to fill the storage location on the sales order, you will probably want to take a look at the perform that fills in a field in vbap.
4) If this is what you are trying to accomplish, you will need to do the select against the config Table TVKOL based on the shipping point/plant and possibly storage condition based on your picking strategies.
5) For the debug part, you can do the same as in the enhancements/modifications but you will not need to activate any projects.
reward if useful
regards
Ravi

Debugging a User Exit or Program

Hi,
I would like to debug a program, and locate and fix an error in one of the user exits. How can I go about doing this?
Thanks,
Shah.

Hi,
Enhancement/Modifications
1) Execute tcode SMOD to find available enhancement/modifications.
2) Create a project for the enhancement in tcode CMOD.
3) You must activate your project first in order to hit a break-point or get into debug mode for your existing enhancements/modifications, if you do not, the best you will be able to do is step through the main program until you hit the call for that particular customer enhancement.
4) To get into debug, you can enter a hard break-point in the enhancement itself, set a soft break-point with the stop sign, or the long way, before you execute your transaction or while you are in your transaction, you can place a /h in the ok code area (this is the area of your gui where you can type in a tcode). Once you have the /h, hit enter and that will take you into debug, from there, you can do many different things to find exactly what you are looking for.
User Exits
1) Identify the main program you want to locate a user exit/debug.
2) For example, go to SE80 and do a search by program or dev class (SAPMV45A sales order or Dev Class VMOD, most SD user exits are in this dev class). In SE80 if you go by program, most user exit programs end in a 'Z' on a rare occasion 'X' or 'Y'.
3) If you are looking at including MV45AFZZ, you can see where there are different forms. These forms will get called at times within the program. If you are looking to fill the storage location on the sales order, you will probably want to take a look at the perform that fills in a field in vbap.
4) If this is what you are trying to accomplish, you will need to do the select against the config Table TVKOL based on the shipping point/plant and possibly storage condition based on your picking strategies.
5) For the debug part, you can do the same as in the enhancements/modifications but you will not need to activate any projects.
Reward points if found helpfull..
Cheers,
Chandra Sekhar.

When the User exit EXIT_SAPLL03T_002 would be triggered?

Hi All,
When the User exit EXIT_SAPLL03T_002 would be triggered?
As per my understanding which would be triggered while confirming the transferorder (LT12). but In which conditon it will be triggered?I am unable to find out. if any one find the solution please pass ur inputs ASAP.
thanks in advance,
chandran.

Hi,
WHen the "Update SAPML03T transfer orders" is done..This user exit will be triggered..
Since the user exit is in a update module..If you put break-point it will not stop...
Enable the UPDATE DEBUGGING..It will process all the update modules..
Check when the FM L_TA_QUITTIEREN is called....You can debug through your code..
Thanks,
Naren

Determine which validation step called the user exit, possible?

Hello all,
We have a a validation with different steps that use the same user exit in their respective check.
My functional analyst asked me if there is a way to programmatically determine in the user exit which step is executing the user exit.
So I am asking the same question here.
As an example:
Validation FI100 has step 001, 002, and 003.
Each of these steps use the user exit U100 from module pool ZGGBR001 in their check.
I haven't found a way in the code of U100 to determine which step called U100.
Does anyone know if this can be done?
I have used the following technique to get a variable from the program's call stack.
data: var_name(30) type c value '(Z_CALLING)VARIABLE' .
field-symbols: <fs> type any.
assign (var_name) to <fs>.
write: / 'Variable from Z_CALLING', <fs>.
But I'm not sure how this might work with validation steps/user exits.
Thanks
Bruce

Vinod,
I did some debugging after I posted my question. I came to the same solution, use FM 'SYSTEM_CALLSTACK'.
VALCHCK_2FI100##001
loop at i_callstack into w_callstack
where EVENTNAME+0(9) = 'VALCHCK_2'.
FI110 is the validation
001 is the step
Thomas,
Thanks for the caveats.
Bruce

How to find out the user exit is implemented

Hi All,
Kindly let me know the process to be followed to find out the User exit is implemented in SAP system.
I have seen many senriors suggestions for some treads to check if there is any Exit is implemented in the process when the system is behaving differently rather standard.
Is it the only way with help of ABAP'er we can find out or the functional consultant also can find out through some procedure?
I tied in google for this doubt, but i could not get the relavant answer.Pleaea execuse me if this already answered.
Thanks,

Hi Krishna/TW,
Thank you for your immediate replies. Sorry i think i have not explained correctly my requirment.
Let me explain my requirement once again.Let us say Comapny has implemented one Exit in the project, now i want to find out what exactly the Exit was implemented.
Example: In STO process user is able to increase the qty in delivery. As per the client requriement system should not allow.
This is not possible in standard to control even after maintainig check over delivery field in 0VLP.
For this comapny has already implemented one enahnceament.
User Exit : USER EXIT_READ_DOCUMENT
Program: MV50AFZ1
like this when any one joined in the project we do not know what are all the Exits are implemented in the SAP system where we are working.
So if i want to find out if there is any Exit or enhancement implemented, what is the process to find out?
I hope now am clear with my requirement.
Thanks in advance.

How to find out the user-exits?

hi.
how to find out the user-exits?
regards
eswar.

Hi,
*& Report ZEXITFINDER
*report zexitfinder.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
tables : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
*& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode obligatory.
selection-screen skip.
selection-screen end of block a01.
*& Start of main program
start-of-selection.
Validate Transaction Code
select single * from tstc
where tcode eq p_tcode.
Find Repository Objects for transaction code
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
Find SAP Modifactions
select * from tadir
into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
Take the user to SMOD for the Exit that was selected.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
Regards

Debugging the user exit in ECC

Similar Messages

Maybe you are looking for