Debugging the XI Scenarios

Hi,
i want to know how can we debug the all type of scenarios.. i mean Proxys(both inbound and Outbound proxys) debugging and File to RFC and RFC to File scenarios Debugging.. and IDOC scenarios Debugging information..
can any body having any idea about debugging.. please share with me.. any debugging documents also helpful to me..
Thanks
Babu

Hi,
For debugging inbound and outbound scenario follow the below PDF:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3dfac358-0d01-0010-5598-d4900e81a30c
Debugging Inbound Proxy:
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
For all the other scenario u have to follow the below steps:
Supose take a example of file:
1) First check the file is picked up or not.
2) check the communication channel status through RWB.
3) Check the pay load in SXMB_MONI
4) check whether the payload message is proper or not
5) Check whether file is generated at target directory or not.
IDOC scenario:
U need to check all the IDOC configuration which is done in R3 *** well as Xi.
Configuration means RFC deatination, Partner profile,IDX1,IDX2, port etc
Troubleshooting File-to-IDOC Scenario in XI
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
Go to WE02 transaction and check the IDOC status.
SOAP:
1)troubleshooting SOAP:
/people/varadharajan.krishnasamy/blog/2007/01/09/troubleshooting-soap-message--xi
2) Check the WSDL which geneatated properly or not using XML-SPY.
3) test the generated WSDL using on webbreowser.
4) https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40611dd6-e66e-2910-f383-e80fb44f9cd4
So like wise u can debug the sencario it again depends upon what error and where u r getting the error.
Thnx
Chirag

Similar Messages

Can we trace the values in a cursor if we debug the package?

Can we trace the values in a cursor if we debug the package having a cursor?
Does it shows cursor attributes like %rowcount,%notfound,%found etc?
Because i am debugging a pachage , and I am getting the exception.
And its after the fetching of a cursor I am hitting on the exception.
If I click the profilier after I debug, its showing the error ora 1775::looping chain of synonyms.
The scenario is after the fetching of cursor, i am hitting the exception and after debug If i see the profilier I am getting the error 1775::looping chain of synonyms.

Firslty, thanks for your time.
I am using the PLSQL developer.
The select command in the cursor picks tha value but when it fetches, it is showing the error.
Any idea what could be the reason.?
FETCH get_notices ----would show ( rowcount =0,%open,first iteration), does that mean cursor is not picking any value?
Because i have checked the select statement and it picks the value.

How to debug the back ground job

Hi All,
I want to debug the program, but it is taking more time so iam running it in back ground, but i need to debug the program from some particular point....is there any other way to debug the program...
Means...to run the program in background upto particular point and later i need to run it in debug mode.
Please suggest.
Thanks & Regards,
Hari

Hi,
You can do this only after the job has finished execution. This will simulate the exact background scenario with the same selection screen values as used in the job and sy-batch set to 'X'.
Use SM37 to get list of jobs , type 'JDBG' in the command line ( no '/' ), put the cursor on the job and press ENTER
You are in debug mode now. Step through SAP program (press F7 couple of times) until you get to code you need.
Hope this helps u.
Thanks.

I'm using acrobat pro in my project after debuging the project and after opening a certain number of PDF files I receive the message: the maximum number of files opened has been reached, you have to close some files to continu.even doing that, I steel rec

I'm using acrobat pro in my project after debuging the project and after opening a certain number of PDF files I receive the message: the maximum number of files opened has been reached, you have to close some files to continu.even doing that, I steel receive the same message.Some one can tel what to do please? Thanks

Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt

Error when debugging the Web DynPro application-Flight Example

Hi all,
I am trying to execute the Flight Application example.
In the Search View I have entered City from and to and getting only one record in the table control as output in Result View irrespective of any cities.
I checked with SAPR/3 but it is showing more records.
For finding the error I tried to DEBUG the application.starting the DEBUG immediately I am getting the error REMOTE VM NOT CONNECTED.I am trying to solve this error to Starting the DEBUG.
If any tips to solve this error in DEBUG mode and what is the reson the other records are not showing in the output Result view.
Thanks in Advance.
Regards,
Ram

Hi,
This is clearly a version imcompatibility issue ,
check below link :
/message/9597673#9597673 [original link is broken]
Please do some search on sdn before posting the questions. as the answer is already available.
Regards
Deepak

Error While Debugging the Application

Hello,
I am developing applications using WebDynpro for JAVA.
I am using NWDI 7.0.
I am getting an error while debugging the application. When I click on debug mode in debug perspective, I am getting error message as :
"Failed to connect to remote VM. Connection refused"
Could any one of you help in resolving this error?
Thanks and regards,
Pradnya

Hi,
I think NWDI has nothing to do with debugging the application.
Probably you will get some answers in WebDynpro java forum
-Ashutosh

Unable to debug the jspx page on Jdeveloper Studio Edition Version 11.1.1.6.0, Build JDEVADF_11.1.1.6.0_GENERIC_111205.1733.6192.1, using Windows 7 OS

Hi,
I am unable to debug the jspx page on Jdeveloper Studio Edition Version 11.1.1.6.0, Build JDEVADF_11.1.1.6.0_GENERIC_111205.1733.6192.1, using Windows 7 OS.
When right click on jspx page , clicks on Debug option, it gives the following error:
Debugger unable to connect to local process.
[Server Instance IntegratedWebLogicServer is shutting down. All applications currently running will be terminated and undeployed.]
I also restarted the Jdeveloper, even re-installed Jdev but still the problem persist.
Any help is appreciated.
Thanks in advance.

If the jspx page is not part of the adfc-config.xml the page can only be displayed, but the tags will not work as the adf life cycle is not involved. drag te page onto the adfc-config.xml (the unbounded task flow), right click on it and select debug from the context menu.
Main problem is : Weblogic server cannot be started in debug mode.
To check this, open the application navigator, select the integrated server, right click on it and select 'debug' from the context menu.
After a short time you should see some messages and at last you should see <Runnning> in the message log. Now the server runs (without any of your applications, but it runs).
If you done't see the 'Running' message you should see an error, which you should post here.
Timo

Number of document created in th backend in the classic scenario?

Dear Experts,
Could you please tell me the number of document and its details created in the ECC backend in the below cases?
1. Case 1:
Define backend objects:Purchase requistion created if no stock available.
Is it correct that the system will create two documents here? The first document will be Purchase Requisition
( from the classic scenario) and then a purchase order has to be triggered manually from the PR?
2. Case 2:
Define backend objects: Purchase Order if data complete, otherwise Purchase requisition.
Here, if all the data are complete and the system directly creates Purchase Order in the ECC backend system. From the shopping cart in SRM, one can see only ECC backend purchase order, no purchase requistion. If i check the Purchase Order in ECC backend system, I donot see any purchase requistion with reference to the Purchase Order.
Could you please help here? What are the number of documents created here? It is one or two (both purchase requisition and Purchase Order).
Is it not a violation of standard classic scenario if only one document is created?
Thanks and regards,
Ranjan

Hi,
In other words in the shopping cart is approved
1) If the source is assigned -It will create a P.O in the backend (Classic)
2) If the source is NOT assigned -It will create a P.R in the backend (Classic) .. you have to assign a source
Regards
G.Ganesh Kumar

What are the major scenarios to customize DAF pipeline ?

Hi,
In which purpose DAF pipeline need to be customized.
Please tell me what are scenarios to customize the DAF pipeline.
Thanks In Advance.

Some of the probable scenarios where we might want to customize the DAF pipeline: autologin based on a custom logic; implementing SSO; to set some request attributes based on request URI and/or parameters which can be used by the subsequent servlets/filters or other components; detect device type based on user-agent and other parameters/attributes; trigger a custom event on some action like page view etc.

How to deal with BRS for the below scenario?

Hi,
I would like to know the solution for the below scenario for BRS:
I have a customer who was maintaining their accounts with Tally software for their previous Financial Year. This year they have shifted to SAP B1 2005B. They have issued few cheques for their vendors in the month of march 2008 which has been realised in the month of April 2008. As per Tally, the closing balance of their bank is 8 Lakh but as per the bank statement, their closing balance is 23 Lakhs. In SAP, the opening Balance for the bank is considered as 23 Lakhs. Now there are 15 Lakh worth cheques which were not realised for the month of March 2008.
Example:
abc a/c - 3Lakh
def a/c - 5lakh
xyz a/c - 7 lakh
How do i reconcile for this scenario and what procedures do i follow in SAP?
Thanks and Regards,
Kaushal

Hi Kamlesh,
Thanks for your response.
Actually, In the "Process External Bank Statement" window, i see that there are few entries which is for the previous year and which has not been reconciled. I have never worked practically on BRS and hence, i am scared to make any changes in the clients database without being confident on what i am doing. I need to reconcile for one of their Bank a/c for the month of April '08. I have the copy of the statements for the month ending 31st Mar 08 and 30th Apr 08. The closing balances are as below:
31/03/08 - 2300000.00
30/04/08 - 3100000.00
Now my OB for Bank a/c for April '08 in SAP is 2300000.00 Dr.
When i go to External Bank Reconciliation - Selection Criteria Screen (Manual Reconciliation), here are the detail that i enter:
Last Balance: INR -7,000,000.00000 (Grayed out by the system)
Ending Balance: INR -3,100,000.00000 (Entered by me)
End Date: 30/04/08 (Entered by me)
"Reconciliation Bank Statement" Screen opens up and shows the below balances in the screen:
Cleared Book Balance: INR -7,000,000.00000
Statement Ending Balance: INR -3,100,000.00000
Difference: INR 3,800,000.00000
As per the Bank statement, i have found all the transactions listed out here for the month of Apr '08 but, i also found that the open transactions for the previous month from April '08 have been lying in "Process External Bank Statement" window.
Could you please help me solve my issue as to what needs to be done or could you also get me some links from where i can get few documents for processing External Bank Reconciliations?
That will be of a great help for me. I need steps as to what needs to be done first and then the next so that i can arrive at the correct closing balance for the month April '08.
Thanks in Advance....
Regards,
Kaushal

Unable to debug the Data Template Error in the Log file

Hi,
I am unable to debug the log file error message Please can anybody explain me in detail where the error lies and how to solve the error.The log file shows the following message.
XDO Data Engine ver 1.0
Resp: 50554
Org ID : 204
Request ID: 2865643
All Parameters: USER_ID=1318:REPORT_TYPE=Report Only:P_SET_OF_BOOKS_ID=1:TRNS_STATUS=Posted:P_APPROVED=Not Approved:PERIOD=Sep-05
Data Template Code: ILDVAPDN
Data Template Application Short Name: CLE
Debug Flag: Y
{TRNS_STATUS=Posted, REPORT_TYPE=Report Only, PERIOD=Sep-05, USER_ID=1318, P_SET_OF_BOOKS_ID=1, P_APPROVED=Not Approved}
Calling XDO Data Engine...
java.lang.NullPointerException
     at oracle.apps.xdo.dataengine.DataTemplateParser.getObjectVlaue(DataTemplateParser.java:1424)
     at oracle.apps.xdo.dataengine.DataTemplateParser.replaceSubstituteVariables(DataTemplateParser.java:1226)
     at oracle.apps.xdo.dataengine.XMLPGEN.writeData(XMLPGEN.java:398)
     at oracle.apps.xdo.dataengine.XMLPGEN.writeGroupStructure(XMLPGEN.java:281)
     at oracle.apps.xdo.dataengine.XMLPGEN.processData(XMLPGEN.java:251)
     at oracle.apps.xdo.dataengine.XMLPGEN.processXML(XMLPGEN.java:192)
     at oracle.apps.xdo.dataengine.XMLPGEN.writeXML(XMLPGEN.java:222)
     at oracle.apps.xdo.dataengine.DataProcessor.processData(DataProcessor.java:334)
     at oracle.apps.xdo.oa.util.DataTemplate.processData(DataTemplate.java:236)
     at oracle.apps.xdo.oa.cp.JCP4XDODataEngine.runProgram(JCP4XDODataEngine.java:272)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:148)
Start of log messages from FND_FILE
Start of After parameter Report Trigger Execution..
Gl Set of Books.....P
Organization NameVision Operations
Entering TRNS STATUS POSTED****** 648Posted
end of the trns status..687 Posted
currency_code 20USD
P_PRECISION 272
precision 332
GL NAME 40Vision Operations (USA)
Executing the procedure get format ..
ExecutED the procedure get format and the Result..
End of Before Report Execution..
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 2865643 on node AP615CMR at 28-SEP-2006 07:58:26.
Post-processing of request 2865643 failed at 28-SEP-2006 07:58:38 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Finished executing request completion options.
Concurrent request completed
Current system time is 28-SEP-2006 07:58:38
Thanks & Regards
Suresh Singh

Generally the DBAs are aware of the OPP service log. They can tell you the cause of the problem.
Anyway, how did you resolve the issue?

Can anyone tell me the field name, table name for the following scenario?

Hi All,
Can anyone tell me the field name and the respective table name for the following scenario's?
1. A report to list all the materials to which Invoice is done and delivery is pending.
2. A report for Order tracking.
3. A report, which gives PO(Purchase Order), Pricing details.
4. A report, which calculates the MATERIAL COST. It will select all the material issued for the entered service order number from stock.
Thanks & Regards,
P.Gowrishanker
Edited by: Gowrishanker pari on Jun 1, 2008 8:58 AM

I believe that OmniVision Technologies has the contract for the 3gs.

JavaScript alert in AS3 or AS2 to debug the external actionscript file

Hi,
Is there any way to debug the external AS file as i dont want to use "trace".
I have an idea to use the input text field the check the variable/function is working right but this is not enough so is there any process in AS2 or AS3.
Thanks in advance..

my mistake ..i have used there dynamic textfiled.
but i got a easy solution by using
getURL ("javascript:alert('Testing');");
but this is not the good solution
is there any way to import the alert contolls in AS2
like i have read somewhere
import mx.controls.Alert;
Please reply..

Provide the java code for the following scenario.

Hi Experts,
I have tried with all the combinations for this scenario. As per my understanding i require java code for the following scenario
so that it becomes easy........
I require a Message mapping for this Logic.
In the Source there are 4 fields and, the Target side, the fields should appear like this.
Source Structure- File
Record
|-> Header
Order_No
Date
|-> Item
Mat_No
Quantity
Target Structure-IDoc
IDoc
|-> Header
|-> Segment
Delivery_Order_No
Recv_Date
|-> Item
|-> Segment
Delivery_Order_No
Material_Num
Recv_Quantity.
The Logic is for every Order number an IDOC is generated.And if the Material num matches then the quantity should be added. and important note is that the material numbers are different for every order number. That means if a material number is 2 in the order number A. Then the material number can never be 2 in any of the order numbers.Here is the following with an example for the above scenario.
For example:-
we have
Source Structure- File
Order-no Date Mat_No Quantity
1 01/02/2011 A 10
1 01/02/2011 B 15
1 01/02/2011 A 10
2 01/02/2011 C 10
2 01/02/2011 C 10
3 01/02/2011 D 20
3 01/02/2011 D 10
3 01/02/2011 E 25
Target Structure-IDoc
Delivery_Order_No Recv_Date Material_Num Recv_Quantity
1 01/02/2011 A 20
1 01/02/2011 B 15
2 01/02/2011 C 20
3 01/02/2011 D 30
3 01/02/2011 E 25
So for this example total of 5-Idocs created. That means for this example if Order_No is 1 When the Mat_No is A the quantity gets added. For this Scenario 1 IDoc with four Fields 2 in Header(Delivery_Order_No, Recv_Date) and 2 in Item(Material_Num, Recv_Quantity) is generated by adding the quantity field in the Target Side. Similarly if Order_No is 1 when the Mat_No is B then separate IDoc is generated with four Fields 2 in Header(Delivery_Order_No, Recv_Date) and 2 in Item(Material_Num, Recv_Quantity) in the Target Side. Similarly, if Order_No is 2 when the Mat_No is C, an IDoc is generated with four Fields 2 in Header(Delivery_Order_No, Recv_Date) and 2 in Item(Material_Num, Recv_Quantity) by adding the quantity field in the Target Side. ike wise the process goes on upto 3.Kindly do the needy..
Kindly provide the java code.
Thanq very much in advance..

what i have understood from ur example is that u want to generate an idoc for unique combination of Order-no and Mat_No
if yes then chk the below mapping..
change the context of Order_No, Date, Mat_No and Quantity to Record (right click-> context)
1)
Order-no
----------------------concat[;]---sort----splitbyvalue(valuechanged)-----collapse context---IDoc
Mat_No
2)
Order-no
--------concat[;]---sort----splitbyvalue(value changed)---collapse context---UDF1--splitbyvalue(each value)--Delivery_Order_No
Mat_No
3)
Order-no
-----------concat[;]---sortbykey----------------------- \
Mat_No                       /                            \
Date--------------- /                                       \
----------------------------------------------------------FormatByExample-----collapsecontext---splitbyvalue(each value)----Recv_Date
Order-no                                                 /
-----------concat[;]---sort----splitbyvalue(value changed)
Mat_No
4)
Order-no
--------concat[;]---sort----splitbyvalue(value changed)---collapse context-UDF2--splitbyvalue(each value)--Material_Num
Mat_No
5)
Order-no
-----------concat[;]---sortbykey
Mat_No                       /
Quantity --------------- /
----------------------------------------------------------FormatByExample-----SUM(under statistic)----Recv_Quantity
Order-no
-----------concat[;]---sort----splitbyvalue(value changed)
Mat_No
UDF1:
String [] temp= a.split(";");
return temp[0];
UDF2:
String [] temp= a.split(";");
return temp[1];

How to debug the background job in ABAP

Hi Guys,
Can anyone let me know how to debug the background job in ABAP.
Thanks in advance
peter

Hi,
Goto SM37 and see the log if any is there and based on that you can check the code.
you can't debug background job.
Create a Variant for the Program and
Schedule JOB in background:
Go to SM36 create a Job
enter Program and Variant for that program in STEP..
click on Start Condition
Click on DATE and TIME enter date scheduled Start and END times
click on Period Values
Click on HOURLY/WEEKLY etc
CLick on RESTRICTIONS also to use further criteria.
so your job will be scheduled and run as per your requirement.
and in SM37 Transaction check the status of that JOB
Check this link for scheduling jobs..
http://help.sap.com/saphelp_nw2004s/helpdata/en/c4/3a7f87505211d189550000e829fbbd/content.htm
Check this
http://jplamontre.free.fr/SAP/Debug%20background%20process.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/abap/abap+debugger&
Regards,
Padmam.

Debugging the XI Scenarios

Similar Messages

Maybe you are looking for