Decent VHS capture hardware costs $170 or more?

Hi folks,
I'm just making sure I understand correctly -
Decent hardware to capture RCA/Composite outputs from e.g. a VHS VCR will cost something like $200? For Canopus / Grass Valley DV Bridges. There's nothing cheaper.
This is what folks have suggested in a couple of threads I've been in.
FWIW I'm not against buying used stuff, but I can't buy anything complicated. I can barely get new, "easy" stuff to work (like PE).
Thanks!
Mike

There are cheaper divices around but the usually give out of sync problems.
Grass Valley converters are not complicated. Just hook them up and capture.
All you need is the red/white/yellow cables and a firewire cable.
Your computer does need a firewire connection.

Similar Messages

Capture equipment cost in project

Dear All,
need to capture the cost of equipment which uses for project,but problem is that they take equipment from stock & uses for project work & keep it back in stock after use,
How we can capture this cost in project?
please help me out.
Regards
Gajjen

Hi,
If you are only using some tools for which requires simple functionalities, they can be defined as PRT's. In case they need to be treated as Assets with depreciation functionality, maintenance functionality as equipments ans so on, then treating them as equipments would me more appropriate. There is one more module in SAP called ETM which has enhanced functionality over PM in handling of equipments.
Usage depends on your requirement. Consult other modules too before deciding.
Regards,
Arul.

Capturing refurbishment cost in breakdown order

Dear Gurus,
If the material is being sent outside for refurbishment through a refurbishment order and that material is part of an equipment which has broken down(a breakdown order has already been raised for that equipment), the client wants the refurbishment cost to be captured against the equipment which has broken down . Same is the case with preventive maintenance. They want to capture the cost of material sent outside through refurbishment order to be captured against the equipment undergoing preventive maintenance. How can i address the above issue? Also how is it possible to send the material outside for repair through a breakdown order?
Regards,
Abhishek

See There are two way as mentioned below.
1. Just use IW36 transaction & Give main order as superior oprder on intitial screen.
2. open the main order in iw32 & follow the path as Order -
> create (special) ---> Sub order
Select the refurbishment order type to sub order.
i think this will answer ur question. if you required further more assistance please let me know.
Regards

Reversing Landed Cost document with more than one vendor

Hi Experts,
Reversing Landed Cost document with more than one vendor:
My client can reverse a landed cost document with One Vendor, but cannot with multiple vendors. I have also tested this in 8.8 PL10. Here is a brief description:
Created Landed cost by selecting 2 vendors in the Vendor field.
After you picked one vendor, you go to the vendor code/name again then choose another vendor you
need, once you picked, the system will ask you whether you want to delete the previous data, then
you say no, after then you will see the vendor name became "different vendors" and code be "********"
(on the vendor tab: you will see two vendors)
To Reverse Landed Cost we do the following with Landed Cost documents that only have one vendor:
I can copy from the Landed Cost document (on the right-bottom corner) while creating new one with
zero amount to reverse, which is ok; but for multiple vendors, the list of vendors onlyshows one of
the vendors for Good Receipts & Landed Cost.
Cannot copy from a Landed Cost document wioth more than one vendor to reverse this Landed Cost.
To be albe to copy from a previously created Landed Cost document (with multiple vendors) as you
can with one vendor to reverse the transaction.
Can this functionality be added to future versions?

Take a look at business area and groupings in they payment program settings...
I am not sure what version you are on but the following link for 4.7 should provide some valuable information...
http://help.sap.com/saphelp_47x200/helpdata/en/01/a9be64455711d182b40000e829fbfe/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/01/a9be64455711d182b40000e829fbfe/frameset.htm
Grouping Open Items and Individual Payments
Wherever possible, the payment program will always group items together for payment.
The payment program can only group together open items for payment if the open items in an account have the same:
1. Currency
2. Payment method in the item
3. Bank in the item
4. Contents of the grouping fields (if a grouping key is specified in the customer or vendor master record)
You can also pay open items from different company codes together, as well as customer and vendor line items.
Items in an account are not grouped together if you:
1. Make payments separately per business area. This procedure entails separate payments being created per business area.
2. Want to make individual payments
Items in which a payment method is specified are not grouped with items in which no payment method is specified.
You define the required grouping key in the IMG for Financial Accounting under Accounts Receivable and Accounts Payable -> Business Transactions -> Outgoing Payments -> Automatic Outgoing Payments -> Payment Method/Bank Selection for Payment Program -> Define Payment Groupings.
In our system, if the business area is the same, there will be one ZP document with one line with a posting key of 25. Otherwise there will be many individual 25 posting key lines with.

How to capture the cost on project of freely supplied components to vendors

Dear Friend's,
My client is sending some child components to their vendor's on free of cost basis to manufacture products like panels, tanks etc. for any particular Customer Project.
Once these products gets manufacured by vendor, they supply to client stores, from here my client is doing the delivery & billing to their customer's.
Here my client's requirement is that they wanted to capture the cost of free supplied child componenets to vendors for any particular project.
How i can capture this cost for any project..............Kindly give some input on this scenario to full fill the requirement.
Thanks & Regards,
Sandeep Theurkar

Dear Sandeep
How is the client "sending" the parts to the vendor?How are you maintaining the process of sending these parts to the vendor?
Are these parts maintained in the Organization's inventory?
Thanks and Regards

Audio Capture only happens if its more than 5 seconds

Hello,
I'm writing a midlet that does audio capture on the LG CU500 phone. When I capture for 5 seconds or more, audio capture works as intended, however if I only record for under 5 seconds, it doesn't work. There is no timer. Would could be causing the problem?
Thanks
aztec30

Here is a snippet of the code that i'm using. When playing back, if I record say 10 seconds, I only hear about 7 seconds of the recording. About 3 seconds are cut off at the end. If I record for say less than 4 seconds, nothing seems to be recorded, nothing plays back.
To record I do the following
try {
if(player != null)
player.stop();
if(ctrl != null)
ctrl.commit();
player.deallocate();
player.close();
ThreadSleep(500);
if (player==null) {
player = Manager.createPlayer("capture://audio?encoding=audio/amr");
player.realize();
player.prefetch();
player.addPlayerListener(playerListener);
is = new ByteArrayOutputStream();
ctrl = (RecordControl)player.getControl("RecordControl");
ctrl.setRecordStream(is);
ctrl.startRecord();
player.start();
} catch (Throwable e) {
Once recording is stopped I do this
try {
player.stop();
ctrl.commit();
player.deallocate();
player.close();
Thread.sleep(500);
if (is !=null) {
playback= Manager.createPlayer(new ByteArrayInputStream(is.toByteArray()),
"audio/amr");
playback.addPlayerListener(playerListener);
playback.start();
} catch (Throwable e) {

Hi i was wondering can i buy a macbook pro 13 inch. with a 500 GB hardrive that costs 50 dollers more im gonna buy the one that costs 1200 dollers anyone who can help me? i know that can do it online but i was wondering can i buy it like that at the store

hi i was wondering can i buy a macbook pro 13 inch. with a 500 GB hardrive that costs 50 dollers more im gonna buy the one that costs 1200 dollers anyone who can help me? i know that can do it online but i was wondering can i buy it like that at the store

anton93 wrote:
hi i was wondering can i buy a macbook pro 13 inch. with a 500 GB hardrive that costs 50 dollers more im gonna buy the one that costs 1200 dollers anyone who can help me? i know that can do it online but i was wondering can i buy it like that at the store
Call the store & ask them!

How to capture Material costs, profit margins in pricing

Guys,
What is the way to capture material costs, profit margins and other sub-totals into the pricing procedure?
Thank you.

Hi
For capturing the material costs, you can use one of VPRS, EK01 or EK02 condition types. The usage of these condition types and their significance can be seen in some other thread here. There are lot of threads on these condition types.
You can also go to these links given below.
http://sap.ittoolbox.com/groups/technical-functional/sap-log-sd/condition-type-ek01-ek02-1396383
http://www.jt77.com/system-dynamics/model-08388.html
http://www.jt77.com/system-dynamics/model-05254.html
http://www.jt77.com/system-dynamics/model-04469.html
http://www.sap-img.com/sap-sd/difference-between-condition-type.htm
This should also tell you something about profit margin.
For subtotals, there is a separate column in pricing procedure and you can mention which subtotal a condition type or subtotal should correspond to. The subtotals range from 1 to 9 and then A to Z. The purpose of these subtotals can be seen by putting an F1 in that column or through some oss notes.
Hope this helps you.
Rewards if this helps.

Can we assign cost center to more than one company code.

Hi All,
Can we use same cost center for more than one company code to post the cost ? Or is it company code dependant?
Thanks,
Kumar

Hi Kumar,
Although the cost center is created under a controlling area, we cannot extend to more than once company code in that controlling area. The Co.code field in Cost Center Master data cannot allow you to feed more than one company code.
But you can post some values from a company code other than the company code to which it is extended. In such case, inter company postings will trigger.
Hope this will clarify your issue.
Best Regards
Surya

Can we send more than 50 files ...even at the cost of a more expensive subscription level?

Can we send more than 50 files ...even at the cost of a more expensive subscription level?
Thanks.

Hi Val,
Nice to see you in the forums again!
There is currently just the one subscription level for Adobe Send. If you want to send more than 50 files per transaction, you can try zipping up some or all of the files and sending them in batches. However, the ZIP files can't be previewed by your recipients, and tracking information pertains only to the full ZIP file.
Best,
Sara

I currently have photoshop and I want to add Lightroom. How do I do that? Does it cost 9.99 MORE for Lightroom or 9.99 for BOTH??

I currently have Photoshop and want to add Lightroom. How do I do that? Does it cost 9.99 MORE for Lightroom or is it 9.99 for BOTH?:

Thanks for the clarification of price. It is not clear to me on the Creative Cloud/ Lightroom /Photoshop download page if it is possible to ADD Lightroom to an existing Photoshop contract. Are you able to help with this question?
Thx !
Cyn

I want to capture quality cost, how can I do it?

What all are the basic settings I should do to capture quality cost during inspection. I mean through activity confirmation.
Control key- I activated milestone confirmation required in SPRO setting for QM02. Is anything else I need to do?
Work center- could anyone help me what exactly I need to do for confirming activity during result recording.
What is the formula need to be maintained in a step by step manner.

Hi,
You can use transaction CRQ1. Enter the plant, work center description & work center category (machine, labour) at initial screen. In the basic data tab, enter short text, person responsible, usage, standard value key. In default value key, enter control key, standard value key for set-up, machine & labour parameters. In the capacity, enter capacity category. In the scheduling category (labour, machine), capacity planner group, basic unit of measure, start time, finish time, break lengths, overload capacity, capacity utilization, no. of work centers. In costing, enter the cost center on which the costs of the work center will be adopted (for example QA department) & activity types for each activity of setup, labour & machine, in formula, enter the formula to calculate costs (for example - setup time formula for setup activity). In technical data enter, machine type, sort string, planner group. Then save the work center data. Then enter the costing data for the activity types in transaction KP26 for the cost center selected.
Assign this work center in the inspection plan operation, where you want to capture the cost. Use control key as QM04, which requires confirmation.
When you confirm the activity of inspection operation in transaction QE51N for result recording, then while saving system asks you to confirm the time required for each operation. System will calculate the costs & assign those on cost center.
Regards,
Prashant

How to capture planned cost

Dear experts ,
please help me in the following scenario.
At one of our location we have PP-PS scenario. production order is made for production in PP module.
in that location mostly JOB production is done, there about 30 % of the total cost of equipment is given to outside contractors. our problem is how to capture that cost in budget ( WBS system is being followed ) in PO WBS is assigned. we have created an activity and rate is maintained in KP26 for that activity so that planned cost is arrived at ( we have to capture the planned cost in production order) , our problem is in WBS amount is coming twice
1)as remaining order plan in WBS and the available budget amount is getting reduced
2) when the SR is made again the same amount is appearing in the commitment in WBS.and the available budget amount is reduced once again
our requirement is budget what is to be done so that budget amount is not reduced twice , we also want to capture the planned cost in production order.
Thanks and regards
sanjiv

HI,
Inorder to get all the actual costs on activity which is actually on WBS. You can do an enhancement. This enhancement should find the all POs against PR which belongs to an activity and will repost the costs that is being posted on WBS on GR to the concerned activity.
Regards,
Anjali

Ideal Computer and Capture hardware for Premiere Pro CS3

I'm working with Premiere Pro CS3 and want to build a new computer based on the AMD platform. I'm currently looking at the AMD Phenom 9850, AMD's newest Quad-Core processor. I'm looking at pairing it with 4GB of DDR2 1066 Memory, a 1GB PCI-E x16 Video card with 4 DVI and 1 HDMI outputs, 2TB SATA 3.0GBs 7200 RPM Hard drives in a striped/mirrored RAID array, all running on one of Gigabyte's newest AM2+ mobos. I'll be running XP Pro SP3. I think I've got the computer locked down, unless anyone's got some insight for me into the specs on it. Also, does Premiere Pro CS3 take advantage of Vista's 64-bit yet? I hate Vista with a passion, but if I'll get significant performance increase from it, then I'll make the migration.
My big question is this: what's Adobe's recommended capture hardware? Budget isn't necessarily a consideration and I'd love something that's got HD-SDI BNC I/O in addition to the standard composite, YCrBr, and DV I/O. I'd also like something that has good pro-audio I/O integrated. Ideally something that would include multiple analog I/O via 1/4" or XLR as well as digital I/O via ADAT lightpipe and AES/EBU. BNC wordclock I/O would be nice too.
Any recommendations? I'm fairly new to the video world, though I've been in the pro audio business for ten years.
Thanks in advance!

>2TB SATA 3.0GBs 7200 RPM Hard drives in a striped/mirrored RAID array
For video, RAID 3 is your best option, found primarily on Areca cards.
For the kind of ins & outs you're looking for, I think the Matrox Axio will be your only option. That's ain't cheap, though.

Red giant shooter suite - vhs capture - order of tools

Hello everyone,
I have some VHS captures that I want to improve. While I understand that VHS is an already limited format, I wanted to improve it a bit using the shooter suite tools.
My question is: in what order should I apply instant HD, denoiser 2, and frames? My aim is for turning the content into 1080p 24 frames per second. Also, if any one has any recommended settings, it is greatly appreciated.

I think your aim, 1080P is too high. VHS effectively is around 240 - 280 vertical resolution. Even 720 may be very high already.
Using SSuite 12.6.1 you still can't make up what isn't there to start with. You can somewhat limit the damage, but that is all.
I would start out with Instant 4K, with the quality setting to 20+, then Denoiser 2 or alternatively Neat Video, and finally Frames. You may skip Frames altogether by exporting with the same framerate as your source material, to keep quality loss to the minimum.

Decent VHS capture hardware costs $170 or more?

Similar Messages

Maybe you are looking for