Decentral J2EE Adapter Engine

I am trying to install a Decentral J2EE Adapter Engine.
Please could someone tell me whether, when defining ABAP UME, should I define the same users as were defined on my Central PI instance for Admin & Guest, or should I use the suffix of the users as I receive in the default values on the screen ?

Hi Mark,
have you tried this presentation?
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/03fd85cc-0201-0010-8ca4-a32a119a582d
Regards,
Michal

Similar Messages

Guide for J2EE Adapter Engine on WAS 6.40 with XI 3.0

Hi all,
we are currently struggling with our AE. We are going to migrate from Xi 2.0 to XI 3.0, we run into problems while configuring our old J2SE AE (for which I have found a good PDF document on the SAP Service Marketplace).
Now we would like to test/configure the J2EE AE on XI 3.0.
But I cant find any guide for this on the SAP Service Marketplace. Does anyone know where to find this?
Thanks
Nesimi Buelbuel

Hi Nesimi,
There is a webinar replay of "Troubleshooting the J2EE Adapter Engine" at
https://www.sdn.sap.com/sdn/webinar.sdn?res=/irj/servlet/prt/portal/prtroot/com.sap.sdn.wcm.compound.docs//library/uuid/47a9a361-0301-0010-d39a-dd40d34b2e9d
Also make sure you check these links:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/webinars/configuring a local adapter engine.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/configuration guide - sap xi 3.0.pdf
Regards,
Sridhar

J2ee Adapter engine installation error

Hi All,
I am installing XI with NW07. I had an ERP2005 server here with ABAP only. I installed Java Add In to it with usage type PI.
Now I tried to install J2ee adapter engine. It showed if i want to run a new installation or continue the old one.
I tried to install installation of J2ee adapter engine from a new directory.
It is stuck in between. I choose it as a MCOD to existing DB.
I can see a new instance for this in MMC and it is up and running.
But the old java instance is not running. None of the Proceses of Old Java instance (dispatcher, server0 and SDM) are not running. Did I do something wrong?
My JVM_BOOTSTRAP.OUT says this:-
Exception occurred:
com.sap.engine.frame.core.configuration.NameNotFoundException: A configuration with the path "cluster_data/dispatcher/ID4065200" does not exist.
at com.sap.engine.core.configuration.impl.ConfigurationDataCacheAllImpl.getSubConfiguration(ConfigurationDataCacheAllImpl.java:107)
at com.sap.engine.core.configuration.impl.ReadAccessConfiguration.getSubConfiguration(ReadAccessConfiguration.java:715)
at com.sap.engine.bootstrap.Synchronizer.getConfiguration(Synchronizer.java:426)
at com.sap.engine.bootstrap.Synchronizer.getElementType(Synchronizer.java:72)
at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:420)
at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Exception occurred:
com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties!
at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:422)
at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
== Caused by: ==----
com.sap.engine.bootstrap.SynchronizationException: No such Dialog Instance (ID4065200) in the database! Check database consistency or local Bootstrap properties!
at com.sap.engine.bootstrap.Synchronizer.getElementType(Synchronizer.java:75)
at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:420)
at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Bootstrap module> Problem occurred while performing synchronization.
My dev_jcontrol.b00 shows:-
JControlStartJLaunch: program = C:\usr\sap\IDE\DVEBMGS00\exe\jlaunch.exe
-> arg00 = C:\usr\sap\IDE\DVEBMGS00\exe\jlaunch.exe
-> arg01 = pf=C:\usr\sap\IDE\SYS\profile\IDE_DVEBMGS00_sapides
-> arg02 = -DSAPINFO=IDE_00_bootstrap
-> arg03 = -nodeId=-1
-> arg04 = -file=C:\usr\sap\IDE\DVEBMGS00\j2ee\cluster\instance.properties
-> arg05 = -syncSem=JSTARTUP_WAIT_ON_5284
-> arg06 = -nodeName=bootstrap
-> arg07 = -jvmOutFile=C:\usr\sap\IDE\DVEBMGS00\work\jvm_bootstrap.out
-> arg08 = -stdOutFile=C:\usr\sap\IDE\DVEBMGS00\work\std_bootstrap.out
-> arg09 = -locOutFile=C:\usr\sap\IDE\DVEBMGS00\work\dev_bootstrap
-> arg10 = -mode=BOOTSTRAP
-> arg11 = pf=C:\usr\sap\IDE\SYS\profile\IDE_DVEBMGS00_sapides
-> arg12 = -DSAPSTART=1
-> arg13 = -DCONNECT_PORT=4740
-> arg14 = -DSAPSYSTEM=00
-> arg15 = -DSAPSYSTEMNAME=IDE
-> arg16 = -DSAPMYNAME=sapides_IDE_00
-> arg17 = -DSAPPROFILE=C:\usr\sap\IDE\SYS\profile\IDE_DVEBMGS00_sapides
-> arg18 = -DFRFC_FALLBACK=ON
-> arg19 = -DFRFC_FALLBACK_HOST=localhost
-> lib path = PATH=C:\j2sdk1.4.2_09\jre\bin\server;C:\j2sdk1.4.2_09\jre\bin;F:\oracle\IDE\102\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\j2sdk1.4.2_06\bin;C:\j2sdk1.4.2_06\lib;C:\usr\sap\IDE\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_09\bin;C:\usr\sap\IDE\DVEBMGS00\j2ee\os_libs;F:\oracle\IDE\102\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\j2sdk1.4.2_06\bin;C:\j2sdk1.4.2_06\lib;C:\usr\sap\IDE\SYS\exe\uc\NTI386
Thr 4232 Tue Sep 16 17:48:04 2008
Thr 4232 *** ERROR => invalid return code of process bootstrap (exitcode = 66) http://jstartxx.c 1642
Thr 4232 JControlExecuteBootstrap: error executing bootstrap node bootstrap (rc = 66)
Thr 4232 JControlCloseProgram: started (exitcode = 66)
Thr 4232 JControlCloseProgram: good bye... (exitcode = 66)
My DEV_BOOTSTRAP.B00 shows:-
Thr 5984 Tue Sep 16 17:48:02 2008
Thr 5984 JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
Thr 5608 Tue Sep 16 17:48:04 2008
Thr 5608 JLaunchIExitJava: exit hook is called (rc = 66)
Thr 5608 **********************************************************************
u2022
o
     ERROR => The Java VM terminated with a non-zero exit code.
     Please see SAP Note 943602 , section 'J2EE Engine exit codes'
     for additional information and trouble shooting.
Thr 5608 JLaunchCloseProgram: good bye (exitcode = 66)
I ran the prerequisite checks before starting the installation.
It shows everything ok except it told me to have a environmental variable as CPIC_MAX_CONV with the value 200 at least. And I did that.
All the other checks were ok.
All are on SAME OS and same machine.
I have J2EE Adapter Engine installation guide, but there is nothing for this in that
In Instance properties file for the old instance it is showing the instance ID which it is not able to find.
In the configtool of both the instances, the instance ID is same under cluster_data and this is of the newer instance
How did the instance ID and data got replaced in the configtool of old instance. I mean the new instance has its new directory or folder.
What Could be the problem?
Did I do anything wrong here?
Kindly help

Hi,
Check out the SNote 997510, " Note 997510 - Troubleshooting
J2EE Engine 6.40/7.0 Bootstrap Issues ".
I hope it will help you to drill more in to the problem
Rgds
Radhakrishna D S

Error in Local J2EE Adapter Engine

Hi All,
We configured the J2ee Adapter engine and did the design and Configuration part also.but while testing the scenario it's giving error in SXMB_MONI as
*<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>*
*- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.ConfigException: ConfigException in XI protocol handler. Failed to determine a receiver agreement for the given message. Root cause: com.sap.aii.af.service.cpa.impl.exception.CPALookupException: Couldn't retrieve outbound binding for the given P/S/A values: FP=;TP=;FS=BS_LAE;TS=BS_LAE;AN=MI_PPS_IB;ANS=urn:pps.com;</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can anyone suggest me?
Thanks,
Kalyan.

Hi kalyan,
If the error still says that, "Failed to determine a receiver agreement for the given message" - could you please compare the Sender/Receiver party/service determined in the XI message header and that in the Receiver Agreement in ID? Also please check the same for the Receiver Interface and Namespace. receiver agreement not found means any of these values doesn't match. If these look fine.............can you provide us with few more extra information...........like at which pipeline step in MONI you getting the error - the message hasn't yet reach Adapter Engine. So I don't think it's a problem in AE.
Regards,
Suddha

Installation of J2ee Adapter engine

Hi All,
As per my understanding in order to install J2ee Adapter engine, First we need to install Java System and later we install J2ee Adapter Engine.
Please correct me if am wrong.
Thanks,
Kalyan.

Hi Prateek,
Thanks for ur reply,
We ahve a J2ee engine in EP server. If i want to configure a Local J2ee engine in that.Do i need to install a separate J2ee adapter engine on already existed J2EE (EP)server. Or can i do directly Configuration in Visual Admin of the existed J2EE server to connect my PI system.
My doubt is J2ee adapter engine already exists in J2ee engine of the WAS or is that a separate installation i need to do even i have tha J2EE engine.
Please clarify my doubt.
Thanks,
Kalyan.

Installation of J2EE Adapter Engine with DB on different host

Hello all,
I don't know if this is the right thread, but hopefully it is.
I have got following assignment:
I have to install NW70 PI/XI J2EE Adapter Engine. The trouble is, that due to a CI and DB hosts politics it's necessary to have database on different host than the central instance is.
But unfortunatelly the "SAPINST" program and its choice of J2EE Adapter Engine installation doesn't offer the possibility to install the product (J2EE AE) as a distributed system. SAPINST simply installs J2EE AE on one host including database. I've not succeeded the find a work-around.
I got two ideas, but I would like to confirm them:
1) Instal full SAP Java AS as a distributed system. After proper installation and patching I would use a SDM tool and deploy all necessary components to get a J2EE Adapter Engine "like" system. The only problem is that I don't know exact difference between normal SAP Java AS and SAP J2EE Adapter Engine and I'm not sure where could I get all necessary .SAR files.
2) Make a installation of SAP J2EE Adapter Engine as SAPINST allows. After installation and pathing, shutdown the system and move database to desired host, change all settings and start SAP J2EE AE as a distributed system. Only thing I'm not sure about is, if the J2EE AE would run in such a landscape.
Could anyone help me to get out of this deadend ?
Thank you for your comments in advance. Rewards points granted.
Tomas

Hi Jitendra,
thank you for your effort.
Maybe the question is more to Oracle forum part, because I don't think, that I would be able to do the installation as I described in point 1) (distributed JAVA AS and manuall deploying of AE components).
Probably the SAPINST is built up in this way, because in most cases it's needed to install J2EE AE on side of the other integrated system and there is one special machine dedicated to it.
If this is true and J2EE AE is really "normal JAVA AS" with some more functionality, I think the installation can be done as I described in point 2) - to install the J2EE AE locally, then shut it down and move the database to different host as required.
Anybody with different idea ?
Thank you
Regards
Tomas

Moving the database of SAP J2EE Adapter Engine on another host

Hello all,
I'd like to ask SAP/Oracle experts if there is any obstacle, why would not be able to move Oracle database of SAP J2EE Adapter Engine on other/different host after the installation.
As I describe int he thread [Installation of J2EE Adapter Engine with DB on different host|Installation of J2EE Adapter Engine with DB on different host;, the SAPINST program doesn't offer the possibility to install J2EE Adapter Engine with DB on other host than the central instance.
Only thing I'm not sure about is if this is done by any purpose for some database requirement, or it's simply not there.
SAP J2EE AE is normal JAVA AS with some more functionalities and is also installed within SAP PI/XI installation, which can run in "distributed model" system.
What do you think ?
Thank you for your opinion in advance.
Regards
Tomas

No opinion anyone ?
Tom

Troubleshooting the J2EE-Adapter Engine PDF

Hi,
anyone has:
Troubleshooting the J2EE-Adapter Engine.pdf
presentation from the webinar ?
if so can you give me the link?
(it's not available on the https://www.sdn.sap.com/sdn/webinar.sdn?res=/irj/servlet/prt/portal/prtroot/com.sap.sdn.wcm.compound.docs//library/uuid/47a9a361-0301-0010-d39a-dd40d34b2e9d ) but maybe someone has it
Thanks:)
Regards,
michal
Message was edited by: Michal Krawczyk

Michal,
Did you get the pdf ? If yes, please send it to [email protected]
Thanks
SKM

SOAP adapter in XI3.0 using J2EE adapter engine

Folks,
I have a scenario SOAP client -> XI 3.0
I am using XI 3.0 and the J2EE adapter framework to configure a sender SOAP adapter. I do not have a Party, just the service and the channel.
I tried using the following url format:
http://<server>:50000/XISOAPAdapter/MessageServlet?channel
=:<service name>:<channel name>
When I use this in my SOAP client , I get an 401 forbidden error in the browser. However when I type this url directly in the browser and I get:
Message Servlet is in Status OK
Status information:
Servlet com.sap.aii.af.mp.soap.web.MessageServlet (Version $Id: //tc/aii/30_REL/src/_adapters/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#5 $) bound to /MessageServlet
Classname ModuleProcessor: null
Lookupname for localModuleProcessorLookupName: localejbs/ModuleProcessorBean
Lookupname for remoteModuleProcessorLookupName: null
ModuleProcessorClass not instantiated
ModuleProcessorLocal is Instance of com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0
ModuleProcessorRemote not instantiated
A couple of questions:
1. Inspite of configuring the sender SOAP adapter, the sender service and the interface, I still cannot see the green light for the SOAP adapter in rumtime workbench->adapter monitoring.
Although the communication channel (in intergration builder- design)shows the status of the adapter as "active"
Does this mean that my SOAP adapter is correctly configured and active?
2. The above mentioned url takes the ABAP engine login/password while the J2EE engine (AFW)takes a different login/password. Which authentication should the SOAP client use?
Thanks for your help!
Shailesh

Post your message to following URL:
http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel
port is the J2EE port 50000 in your example.
Check the newest manual for further details.
Regards
Stefan

J2SE Vs J2EE Adapter Engine

Hi All,
I am having a doubt. Apart from having a decentralized installation location of J2SE Adapter,
What is the difference between the J2EE and J2SE Adapters???????
As much as i understand J2EE adapters installed on the XI Server(part of the installation)
whereas we need to install the J2SE Adapters locally.
Anybody has any idea ???
rgds
RM

Hi,
In one of SAP's presentations I've found:
"Reasons for Decentral SAP J2EE-based AE:
- Protocol of Sender-/Receiver system (e.g. ftp not allowed)
- Driver OS - dependent
- Sender-System has to send independent from IS
- Performance
- Organizational Aspects"
Regards,
michal

SAP PI 7.1 "How Tou2026 Create Modules for the J2EE Adapter Engine"

Hi everybody,
is the How To
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/02706f11-0d01-0010-e5ae-ac25e74c4c81?overridelayout=true
still applicable for 7.1?
Reason: out admin cant find:
u2022     aii_af_lib.sda
u2022     aii_af_svc.sda
u2022     aii_af_cpa_svc.sda
on the java stack.
Thanks Regards
Mario

This is for PI 7.1:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0b39e65-981e-2b10-1c9c-fc3f8e6747fa?overridelayout=true

J2RE + Windows + J2SE Adapter Engine = Dump Xmx128m

Hi,
I want to use a decentralized J2SE Adapter Engine in order to data to XI.
When I install it on a Windows 2000 Professional, AE running is good and all are perfect... But when I install it on a Windows Server 2003, I have the following dump when I use the file "run_adapter.bat":
"-Xmx128m: illegal argument"
Here is the instruction when my tool uses for its running :
java -Xmx128m -classpath aii_msg_adapter.jar;aii_msg_runtime.jar;httpclient.jar;aii_af_trace.jar;aii_rfcadapter.jar;pmi.jar;exception.jar;jperflib.jar;guidgenerator.jar;aii_utilxi_misc.jar;aii_util_cimaccess.jar;sapxmltoolkit.jar;logging.jar;lcrclient.jar;tc_sec_core.jar;tc_sec_api.jar;jms.jar;servlet.jar;jarm.jar;%CLASSPATH%; com.sap.aii.messaging.adapter.AdapterImpl
Notes:
1. J2RE is j2re-1_4_2_06-windows-i586-p.exe)
2. I have replace 128 by 256 or 512, but it's the same issue.
So,
1. Anybody could explain why I have that with Windows Server 2003 ?
2. is it a problem with a Java Virtual Machine ?
3. Must I do something inside Windows : Environment variable, register key or other ?
Any helps are welcome.
Mickael

No. (neither PATH or JAVA_HOME, or J2EE_HOME)
What folder must I precise in this variable :
C:\Program Files\Java\j2re1.4.2_06\javaws ?
or
C:\Program Files\Java\j2re1.4.2_06\bin ?
Regards.
Mickael

Plain J2SE Adapter Engine - SOAP Adapter

Which reasons are there for using the soap adapter at the plain j2se adapter engine instead of the soap adapter at the central adapter engine (XI 3.0)? Which benefits are there? Which cases are known?

The J2SE adapter is a relict from XI 2.0
You may still use it, especially for migration from XI 2.0 to XI 3.0, but it is recommended to use the J2EE adapter engine.
Regards
Stefan

Adapter Engine on XI

Hi,
What are the different types of adapter engines and when do we use Plain J2SE adapter engine?....
why is it used?...Is the installation a diff instance compared to the regular installation?

Hi Ravindra,
The normal Adapter Engine will be on J2EE server.
A Plain J2SE adapter Engine is a toned down variant of the normal adapter engine(J2ee).
It will not have all the adapters that are there in a J2ee adapter engine.
It has fewer security features also.
But it is still available to support Operating systems that do not support J2EE.
But they should have JDK 1.3.1 or higher though.
So, you have to use J2SE adapter engine only when the platform prerequisites doesn't allow you to use the J2EE adapter engine.
Refer this link for more info:
http://help.sap.com/saphelp_nw70/helpdata/en/6f/246b3de666930fe10000000a114084/content.htm
Regards,
Ravi Kanth Talagana

SOAP Adapter at XI 3.0 Central Adapter Engine

Hello,
I'm trying to use the SOAP Adapter with the Central Adapter Engine. It works with the J2SE-Adapter Engine, but not with the Central Adapter Engine.
I Get the Error: No response Available.
Perhaps someone can help me.

The J2SE adapter is a relict from XI 2.0
You may still use it, especially for migration from XI 2.0 to XI 3.0, but it is recommended to use the J2EE adapter engine.
Regards
Stefan

Decentral J2EE Adapter Engine

Similar Messages

Maybe you are looking for