Guide for J2EE Adapter Engine on WAS 6.40 with XI 3.0

Hi all,
we are currently struggling with our AE. We are going to migrate from Xi 2.0 to XI 3.0, we run into problems while configuring our old J2SE AE (for which I have found a good PDF document on the SAP Service Marketplace).
Now we would like to test/configure the J2EE AE on XI 3.0.
But I cant find any guide for this on the SAP Service Marketplace. Does anyone know where to find this?
Thanks
Nesimi Buelbuel

Hi Nesimi,
There is a webinar replay of "Troubleshooting the J2EE Adapter Engine" at
https://www.sdn.sap.com/sdn/webinar.sdn?res=/irj/servlet/prt/portal/prtroot/com.sap.sdn.wcm.compound.docs//library/uuid/47a9a361-0301-0010-d39a-dd40d34b2e9d
Also make sure you check these links:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/webinars/configuring a local adapter engine.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/configuration guide - sap xi 3.0.pdf
Regards,
Sridhar

Similar Messages

Netweaver Config Guide for J2EE Engine Tool

Hi,
Is there a config guide available for J2EE Engine Tool somewhere?
Thank you in advance,
Jozsef

Hi,
I have already searched on that place. I do not need install guide, but a config guide for J2EE Engine Tool.
Thank you and best regards,
Jozsef

J2ee Adapter engine installation error

Hi All,
I am installing XI with NW07. I had an ERP2005 server here with ABAP only. I installed Java Add In to it with usage type PI.
Now I tried to install J2ee adapter engine. It showed if i want to run a new installation or continue the old one.
I tried to install installation of J2ee adapter engine from a new directory.
It is stuck in between. I choose it as a MCOD to existing DB.
I can see a new instance for this in MMC and it is up and running.
But the old java instance is not running. None of the Proceses of Old Java instance (dispatcher, server0 and SDM) are not running. Did I do something wrong?
My JVM_BOOTSTRAP.OUT says this:-
Exception occurred:
com.sap.engine.frame.core.configuration.NameNotFoundException: A configuration with the path "cluster_data/dispatcher/ID4065200" does not exist.
at com.sap.engine.core.configuration.impl.ConfigurationDataCacheAllImpl.getSubConfiguration(ConfigurationDataCacheAllImpl.java:107)
at com.sap.engine.core.configuration.impl.ReadAccessConfiguration.getSubConfiguration(ReadAccessConfiguration.java:715)
at com.sap.engine.bootstrap.Synchronizer.getConfiguration(Synchronizer.java:426)
at com.sap.engine.bootstrap.Synchronizer.getElementType(Synchronizer.java:72)
at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:420)
at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Exception occurred:
com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties!
at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:422)
at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
== Caused by: ==----
com.sap.engine.bootstrap.SynchronizationException: No such Dialog Instance (ID4065200) in the database! Check database consistency or local Bootstrap properties!
at com.sap.engine.bootstrap.Synchronizer.getElementType(Synchronizer.java:75)
at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:420)
at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Bootstrap module> Problem occurred while performing synchronization.
My dev_jcontrol.b00 shows:-
JControlStartJLaunch: program = C:\usr\sap\IDE\DVEBMGS00\exe\jlaunch.exe
-> arg00 = C:\usr\sap\IDE\DVEBMGS00\exe\jlaunch.exe
-> arg01 = pf=C:\usr\sap\IDE\SYS\profile\IDE_DVEBMGS00_sapides
-> arg02 = -DSAPINFO=IDE_00_bootstrap
-> arg03 = -nodeId=-1
-> arg04 = -file=C:\usr\sap\IDE\DVEBMGS00\j2ee\cluster\instance.properties
-> arg05 = -syncSem=JSTARTUP_WAIT_ON_5284
-> arg06 = -nodeName=bootstrap
-> arg07 = -jvmOutFile=C:\usr\sap\IDE\DVEBMGS00\work\jvm_bootstrap.out
-> arg08 = -stdOutFile=C:\usr\sap\IDE\DVEBMGS00\work\std_bootstrap.out
-> arg09 = -locOutFile=C:\usr\sap\IDE\DVEBMGS00\work\dev_bootstrap
-> arg10 = -mode=BOOTSTRAP
-> arg11 = pf=C:\usr\sap\IDE\SYS\profile\IDE_DVEBMGS00_sapides
-> arg12 = -DSAPSTART=1
-> arg13 = -DCONNECT_PORT=4740
-> arg14 = -DSAPSYSTEM=00
-> arg15 = -DSAPSYSTEMNAME=IDE
-> arg16 = -DSAPMYNAME=sapides_IDE_00
-> arg17 = -DSAPPROFILE=C:\usr\sap\IDE\SYS\profile\IDE_DVEBMGS00_sapides
-> arg18 = -DFRFC_FALLBACK=ON
-> arg19 = -DFRFC_FALLBACK_HOST=localhost
-> lib path = PATH=C:\j2sdk1.4.2_09\jre\bin\server;C:\j2sdk1.4.2_09\jre\bin;F:\oracle\IDE\102\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\j2sdk1.4.2_06\bin;C:\j2sdk1.4.2_06\lib;C:\usr\sap\IDE\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_09\bin;C:\usr\sap\IDE\DVEBMGS00\j2ee\os_libs;F:\oracle\IDE\102\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\j2sdk1.4.2_06\bin;C:\j2sdk1.4.2_06\lib;C:\usr\sap\IDE\SYS\exe\uc\NTI386
Thr 4232 Tue Sep 16 17:48:04 2008
Thr 4232 *** ERROR => invalid return code of process bootstrap (exitcode = 66) http://jstartxx.c 1642
Thr 4232 JControlExecuteBootstrap: error executing bootstrap node bootstrap (rc = 66)
Thr 4232 JControlCloseProgram: started (exitcode = 66)
Thr 4232 JControlCloseProgram: good bye... (exitcode = 66)
My DEV_BOOTSTRAP.B00 shows:-
Thr 5984 Tue Sep 16 17:48:02 2008
Thr 5984 JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
Thr 5608 Tue Sep 16 17:48:04 2008
Thr 5608 JLaunchIExitJava: exit hook is called (rc = 66)
Thr 5608 **********************************************************************
u2022
o
     ERROR => The Java VM terminated with a non-zero exit code.
     Please see SAP Note 943602 , section 'J2EE Engine exit codes'
     for additional information and trouble shooting.
Thr 5608 JLaunchCloseProgram: good bye (exitcode = 66)
I ran the prerequisite checks before starting the installation.
It shows everything ok except it told me to have a environmental variable as CPIC_MAX_CONV with the value 200 at least. And I did that.
All the other checks were ok.
All are on SAME OS and same machine.
I have J2EE Adapter Engine installation guide, but there is nothing for this in that
In Instance properties file for the old instance it is showing the instance ID which it is not able to find.
In the configtool of both the instances, the instance ID is same under cluster_data and this is of the newer instance
How did the instance ID and data got replaced in the configtool of old instance. I mean the new instance has its new directory or folder.
What Could be the problem?
Did I do anything wrong here?
Kindly help

Hi,
Check out the SNote 997510, " Note 997510 - Troubleshooting
J2EE Engine 6.40/7.0 Bootstrap Issues ".
I hope it will help you to drill more in to the problem
Rgds
Radhakrishna D S

Installation of J2ee Adapter engine

Hi All,
As per my understanding in order to install J2ee Adapter engine, First we need to install Java System and later we install J2ee Adapter Engine.
Please correct me if am wrong.
Thanks,
Kalyan.

Hi Prateek,
Thanks for ur reply,
We ahve a J2ee engine in EP server. If i want to configure a Local J2ee engine in that.Do i need to install a separate J2ee adapter engine on already existed J2EE (EP)server. Or can i do directly Configuration in Visual Admin of the existed J2EE server to connect my PI system.
My doubt is J2ee adapter engine already exists in J2ee engine of the WAS or is that a separate installation i need to do even i have tha J2EE engine.
Please clarify my doubt.
Thanks,
Kalyan.

In my integration directory adapter engine parameter was not appear forJ2EE

In my integration directory adapter engine parameter was not appear forJ2EE engine.It appears for IDOC and HTTP Adapters.
Please clarify ASAP..
Thanks

Hi Chiru,
You mean to say that, In ur Communication channels based on J2EE Engine like File, RFC,etc u are not able to see Adapter Engine Type Parameter Value as Integration Server.
Reimport SAP BASIS Software Component once again in to repository and restart the Application Server and check.
Regards,
Sudharshan

Ping error in RWB for J2SE Adapter Engine

Hi,
we have several external J2SE adapter engines and they function great other than from a monitoring perspective. In RWB "Ping Status" I'm getting the following:
HTTP request failed. Error code: "401". Error message: "Authorization Required"
Suggestions?
Cheers,
Mattias

<u>This is not an answer to your question.</u>
I've tried to get an answer for: how to register J2SE adapter with Integration Server ?
I tried using SLDAccess service on J2SE adapter with no luck (with this J2SE Adapter Engine is registered in the SLD). My J2SE adapter was never available in the configuration means, in the communication channel ex: file adapter, for the adapter engine drop down all I have is Integration Server, my J2SE adapter was never listed there.
If you know an answer please post.
thanks
SKM<u></u>

Message Archiving for the Adapter Engine

Hi,
we have configured archiving for Integration Engine (SXMB_MONI) messages on the Production XI System. is it necessary to configure Message Archiving for the Adapter Engine also ? in which scenarios archived adapter messages are useful ? are there any other advantages/disadvantages for this(in case of errored messages on the adapter engine) ? Please share any ideas.
Thanks
Pavan.

>>is it necessary to configure Message Archiving for the Adapter Engine also
Not necessary,but depends upon the scenario,lets say you are posting messages to external partner's FTP and there was some issue in connectivity due to which file was not delivered,in this case you need to send the message again.
same thing can happen in inbound messages too.
>>in which scenarios archived adapter messages are useful ?
i would do this specifically for JDBC sender coz once you pick up the files based upon SQL query,you change the flag so that those values are not picked next time,in this case you can't re-run the old query and get same results.
this also holds for proxies and file too.
Thanx
Aamir

Error in Local J2EE Adapter Engine

Hi All,
We configured the J2ee Adapter engine and did the design and Configuration part also.but while testing the scenario it's giving error in SXMB_MONI as
*<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>*
*- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.ConfigException: ConfigException in XI protocol handler. Failed to determine a receiver agreement for the given message. Root cause: com.sap.aii.af.service.cpa.impl.exception.CPALookupException: Couldn't retrieve outbound binding for the given P/S/A values: FP=;TP=;FS=BS_LAE;TS=BS_LAE;AN=MI_PPS_IB;ANS=urn:pps.com;</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can anyone suggest me?
Thanks,
Kalyan.

Hi kalyan,
If the error still says that, "Failed to determine a receiver agreement for the given message" - could you please compare the Sender/Receiver party/service determined in the XI message header and that in the Receiver Agreement in ID? Also please check the same for the Receiver Interface and Namespace. receiver agreement not found means any of these values doesn't match. If these look fine.............can you provide us with few more extra information...........like at which pipeline step in MONI you getting the error - the message hasn't yet reach Adapter Engine. So I don't think it's a problem in AE.
Regards,
Suddha

Error while reading access data (URL, user,password) for the Adapter Engine

Hi,
Any idea on below message? I am doing file to file scenario and got the below tarce from sxmb_moni.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.pi1.piserver1</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>no_messaging_url_found: Unable to find URL for Adapter Engine af.pi1.piserver1</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine af.pi1.piserver1</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks
Balaji

It looks like the adapter engine is not able to register him self on SLD, you have to check in the SLD the "Exchange Infrastructure" domain, you have to verify restarting the J2EE the adapter engine update the entries in the SLD related to the specific XI Domain.
Launch Visual Administrator >> Server >> Services >> SAP AF CPA Cache
Enter the appropriate values for:
SLD.selfregistration.hostname (Use fully qualified hostname)
SLD.selfregistration.httpPort
SLD.selfregistration.httpsPort
Sandro

URL for Central Adapter Engine

Hi,
It seems like our XI Server is unable to locate the Central adapter engine for doing an outbound RFC call. I am trying to call an RFC using the RFC adapter, and getting the following error:
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.nw4.netweaver</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>no_messaging_url_found: Unable to find URL for Adapter Engine af.nw4.netweaver</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.nw4.netweaver</SAP:Stack>
Where do we maintain the URL of the adapter engine ?
thanks,
Manish

I have the same problem since we changed the name of the database server - the server name reported in the error is the old name. I've checked all the properties in this thread, plus follwed through OSS note 764176 with no luck. All the properties reflect the new name, but testing the proxy (SPROXY) still fails with the error:
<CODE>INTERNAL.AE_DETAILS_GET_ERROR</CODE>
<ERRORTEXT>Error when reading the access data (URL, user, password) for the Adapter Engine af.xix.sapsbxcrmdb2</ERRORTEXT>
sapsbxcrmdb2 is the old database server name.
I found one location where this is displayed - in transaction SXI_CACHE (in the client of th integration server), Menu option GOTO -> Adapter Engine Cache. The column 'Adapter Engine Name' reflects the incorrect name. Where is this property stored?
I cleared this entry manually by selecting the row and clicking on the trash can icon. Later it was refreshed properly.
-Mike
Update: I found that the SOAP Reciever channel in my Integration Scenario had a hard-coded entry pointing to the old integration server name in the property 'Adapter Engine'. I changed this by selecting the 'Integration Server' in the drop down. This changed the error behavior (still doesn't work, but the above errors went away).
-Mike
Message was edited by: Mike Hatch
Message was edited by: Mike Hatch
Message was edited by: Mike Hatch

Configuration Steps for Decentralized Adapter Engine

Hi all,
What all configuration steps are required to make Adapter Engine as
Decentralized AE.
I have made required changes in SLD DataSupplier in Visual Administrator.
what more configurations have to be done? On SAP XI Server and Decentralized
Adapter Engine.
With regards
Prasad

Prasad,
After configuring SLD data supplier in Visual Admin, you need to the following
1) Configure the gateway service for the central integration server on adapter engine host.
2) Perform Initial adapter engine cache refresh
3) Trigger data transfer to SLD
4) Check the connection parameters in exchangeProfile
5) Create HTTP destination pmistore in java environment
you have to go through all these tests for decentralized adapter engine. If you have XI configuration guide, it has all these steps in detail for you to configure
--Archana

Decentral J2EE Adapter Engine

I am trying to install a Decentral J2EE Adapter Engine.
Please could someone tell me whether, when defining ABAP UME, should I define the same users as were defined on my Central PI instance for Admin & Guest, or should I use the suffix of the users as I receive in the default values on the screen ?

Hi Mark,
have you tried this presentation?
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/03fd85cc-0201-0010-8ca4-a32a119a582d
Regards,
Michal

Installation of J2EE Adapter Engine with DB on different host

Hello all,
I don't know if this is the right thread, but hopefully it is.
I have got following assignment:
I have to install NW70 PI/XI J2EE Adapter Engine. The trouble is, that due to a CI and DB hosts politics it's necessary to have database on different host than the central instance is.
But unfortunatelly the "SAPINST" program and its choice of J2EE Adapter Engine installation doesn't offer the possibility to install the product (J2EE AE) as a distributed system. SAPINST simply installs J2EE AE on one host including database. I've not succeeded the find a work-around.
I got two ideas, but I would like to confirm them:
1) Instal full SAP Java AS as a distributed system. After proper installation and patching I would use a SDM tool and deploy all necessary components to get a J2EE Adapter Engine "like" system. The only problem is that I don't know exact difference between normal SAP Java AS and SAP J2EE Adapter Engine and I'm not sure where could I get all necessary .SAR files.
2) Make a installation of SAP J2EE Adapter Engine as SAPINST allows. After installation and pathing, shutdown the system and move database to desired host, change all settings and start SAP J2EE AE as a distributed system. Only thing I'm not sure about is, if the J2EE AE would run in such a landscape.
Could anyone help me to get out of this deadend ?
Thank you for your comments in advance. Rewards points granted.
Tomas

Hi Jitendra,
thank you for your effort.
Maybe the question is more to Oracle forum part, because I don't think, that I would be able to do the installation as I described in point 1) (distributed JAVA AS and manuall deploying of AE components).
Probably the SAPINST is built up in this way, because in most cases it's needed to install J2EE AE on side of the other integrated system and there is one special machine dedicated to it.
If this is true and J2EE AE is really "normal JAVA AS" with some more functionality, I think the installation can be done as I described in point 2) - to install the J2EE AE locally, then shut it down and move the database to different host as required.
Anybody with different idea ?
Thank you
Regards
Tomas

Moving the database of SAP J2EE Adapter Engine on another host

Hello all,
I'd like to ask SAP/Oracle experts if there is any obstacle, why would not be able to move Oracle database of SAP J2EE Adapter Engine on other/different host after the installation.
As I describe int he thread [Installation of J2EE Adapter Engine with DB on different host|Installation of J2EE Adapter Engine with DB on different host;, the SAPINST program doesn't offer the possibility to install J2EE Adapter Engine with DB on other host than the central instance.
Only thing I'm not sure about is if this is done by any purpose for some database requirement, or it's simply not there.
SAP J2EE AE is normal JAVA AS with some more functionalities and is also installed within SAP PI/XI installation, which can run in "distributed model" system.
What do you think ?
Thank you for your opinion in advance.
Regards
Tomas

No opinion anyone ?
Tom

Error while reading access data (URL, user, password) for the Adapter Engin

Hi all,
I encountered a red flag in sxmb_moni and when I click on the flag, I get the following message:
Error while reading access data (URL, user, password) for the Adapter Engine
Is there any way I can resolve this? thanks all
Regards,
IX

Possible reason is Adapter engine is not registered on SLD. Check in SLD.
You can also try restarting J2EE adapter engine and update SLD entries specific to XI domain.
Lauch Visual admin go to Server > services > SAP AF CPA Cache
Enter the appropriate values for:
SLD.selfregistration.hostname (Use fully qualified hostname)
SLD.selfregistration.httpPort
SLD.selfregistration.httpsPort
Finally, if all the above seem to be correct check the userID / pwd for user ID : PI*.

Guide for J2EE Adapter Engine on WAS 6.40 with XI 3.0

Similar Messages

Maybe you are looking for