Decode using like
I am trying to do a count using decode but I need to use like %? The following is my code but it doesn't work. What am I doing wrong?
Select count(decode(referral_status, like 'ADMIN CLOSURE%', 1)) / count(decode(referral_status, 'APPOINT TO MTF', 1))*100
from referral_tracking
Where (referral_gen_dt between (:begin_dt) and (:end_dt) or referral_gen_dt is null)
I think in this case it should be sum and not count even if you are implement that either in decode or case - i guess ->
Select sum(decode(instr(referral_status,'ADMIN CLOSURE'),0,0,1)) / sum(decode(referral_status, 'APPOINT TO MTF', 1, 0))*100
from referral_tracking
Where (referral_gen_dt between (:begin_dt) and (:end_dt) or referral_gen_dt is null)N.B.: Not Tested...
Regards.
Satyaki De.
Similar Messages
-
Using Like Operator in a decode function
Hi,
I am trying to find out if I can use the like operator in a decode function
like:
select decode(1234,like '%123%','123 is a match') from dual;
this reults in error ORA-00936: missing expression
is there any way to make this work?
thank youSQL> ed
Wrote file afiedt.buf
1 WITH tbl AS (SELECT '201aaa' dt FROM DUAL UNION ALL
2 SELECT '123bbb' dt FROM DUAL UNION ALL
3 SELECT '567ccc' dt FROM DUAL UNION ALL
4 SELECT 'ab123ddd' dt FROM DUAL
5 )
6 SELECT dt,CASE WHEN dt like '%123%' THEN 'Match'
7 ELSE 'Not Matched'
8 END With_case
9 ,DECODE(REGEXP_SUBSTR(dt,'123'),NULL,'Not Match','Match') With_Regexp
10 ,DECODE(INSTR(dt,'123'),0,'Not Match','Match') With_Instr
11 ,DECODE(REPLACE(dt,'123'),dt,'Not Match','Match') With_Replace
12* FROM tbl
SQL> /
DT WITH_CASE WITH_REGE WITH_INST WITH_REPL
201aaa Not Matched Not Match Not Match Not Match
123bbb Match Match Match Match
567ccc Not Matched Not Match Not Match Not Match
ab123ddd Match Match Match MatchEdited by: Saubhik on Jul 26, 2010 5:24 AM
Edited by: Saubhik on Jul 26, 2010 5:40 AM
Edited by: Saubhik on Jul 26, 2010 5:40 AM -
Sql query using LIKE is very slow
Hi,
I am running SQL query with LIKE on two table with more than two million records on oracle 10g and sun solaris OS. Does anybody have any idea or alternative to improve this query?
it will never use index because i m using LIKE '%xyz%'. I Have posted query below
PROCEDURE order_search
v_search_type_in IN VARCHAR2
,v_search_value1_in IN VARCHAR2 DEFAULT 'NONE'
,v_search_value2_in IN VARCHAR2 DEFAULT 'NONE'
,v_group_id_in IN bcf_groups.group_id%TYPE DEFAULT 0
,v_open_in IN NUMBER DEFAULT 0
,v_requested_in IN NUMBER DEFAULT 0
,v_cancelled_in IN NUMBER DEFAULT 0
,v_closed_in IN NUMBER DEFAULT 0
,v_employee_id_in IN sxweb00.customer.customer_id%TYPE DEFAULT 0
,outcursor IN OUT FulfillmentCurType
IS
v_status_code NUMBER;
v_upper_search_value1 VARCHAR2(500);
v_lower_search_value1 VARCHAR2(500);
v_open_status VARCHAR2(10);
v_closed_status VARCHAR2(10);
v_cancelled_status VARCHAR2(10);
v_requested_status VARCHAR2(10);
v_group_for_search bcf_groups.group_id%TYPE;
v_sql_select VARCHAR2(4000);
v_sql_from VARCHAR2(4000);
v_sql_where VARCHAR2(4000);
v_sql_order_by VARCHAR2(4000);
v_group_where VARCHAR2(100);
v_status_where VARCHAR2(500);
BEGIN
IF v_open_in = 1 THEN
v_open_status := 'OPEN';
END IF;
IF v_closed_in = 1 THEN
v_closed_status := 'CLOSED';
END IF;
IF v_cancelled_in = 1 THEN
v_cancelled_status := 'CANCELLED';
END IF;
IF v_requested_in = 1 THEN
v_requested_status := 'REQUESTED';
END IF;
IF UPPER(v_search_type_in) = 'GROUP'
THEN
v_group_for_search := v_search_value1_in;
ELSE
v_group_for_search := v_group_id_in;
END IF;
-- This is the select statement used for all search types
v_sql_select := ' '
|| 'po.order_id order_id '
|| ',decode('||v_group_id_in||',4,substr(bcf_locator.get_first_location(po.order_id,'||v_group_id_in||'),3),null) first_location '
|| ',TO_CHAR(po.order_date, ''mm/dd/yyyy'') order_date '
|| ',' || v_group_for_search || ' group_id '
|| ',TRIM(TO_CHAR(bcf_fulfillment.get_shipping_total(po.order_id,' || v_group_for_search || ') + bcf_fulfillment.get_tax_total(po.order_id,' || v_group_for_search || ') + bcf_fulfillment.get_subtotal(po.order_id,' || v_group_for_search || ') ,''$999,999,999,999,999,990.99'')) total '
|| ',bcf_fulfillment.get_billing_name (po.customer_id) billing_name '
|| ',bcf_fulfillment.get_open_and_assigned_count(po.order_id,' || v_group_for_search || ') open_and_assigned_count '
|| ',bcf_fulfillment.get_divisions(po.order_id,' || v_group_for_search || ') divisions '
|| ',bcf_fulfillment.get_division_count (po.order_id,' || v_group_for_search || ' ) division_count '
|| ',bcf_fulfillment.get_picker_list (po.order_id,' || v_group_for_search || ') picker_name '
|| ',bcf_fulfillment.get_picker_count (po.order_id,' || v_group_for_search || ') picker_count '
|| ',bcf_fulfillment.get_order_status(po.order_id,' || v_group_for_search || ') order_status '
|| ',po.customer_id customer_id '
-- IF there is only one unique picker then that means there are no unassigned or NULL pickers
-- therefore by default the checkbox should not be selected else the count picker_count is
-- 0 or > 1 meaning that at least one line item has an unassigned employee_id and by default
-- the checkbox should be selected
|| ',DECODE(bcf_fulfillment.get_picker_count(po.order_id,' || v_group_for_search || '),1 ,0,1) print_cb '
|| ',bcf_fulfillment.get_fulfillment_codes(po.order_id,' || v_group_for_search || ') fulfillment_types '
|| ',bcf_fulfillment.has_group_been_reassigned(po.order_id,' || v_group_for_search || ') group_reassigned_flag '
|| ',bcf_fulfillment.get_chain_codes(po.order_id,' || v_group_for_search || ') chain_codes '
|| ',po.status_id order_status_id '
|| ',bcf_fulfillment.get_viewed_by_picker_flag(po.order_id,' || v_group_for_search || ') viewed_by_picker_flag '
|| ',bcf_fulfillment.get_picker_list (po.order_id,' || v_group_for_search || ', ''N'') pickers_without_unassigned '
|| ',bcf_fulfillment.get_group_list (po.order_id) group_list '
|| ',bcf_fulfillment.get_line_item_count(po.order_id,' || v_group_for_search || ') line_item_count '
|| ',bcf_fulfillment.get_shipping_priority(po.order_id,' || v_group_for_search || ') shipping_priority'
-- Anna wants all users to know and always wants to know no matter what the status of the auth or order
|| ',(SELECT decode(count(*),0,''N'',''Y'') FROM bcf_payment WHERE ics_rflag = ''DAVSNO'' AND order_id = po.order_id AND status_code IN (''ATH2'',''FUL2'',''CPT0'',''CPT2'')) avs_failed'
|| ',trunc(po.order_date) date_for_sort'
-- When we need to look at all orders then the v_group_for_search will be zero i.e. customer service rep
IF v_group_for_search = 0 THEN
-- This is the core tables used by most search types
v_sql_from := ' '
|| 'FROM product_order po'
-- || ',bcf_lookup lu'
-- This is the core table join needed for most search types
v_sql_where := ' '
|| 'WHERE 1 = 1 '
-- No orders will be looked at for fulfillment purposes that occurred before the minimum
-- shipping cost functionality was added
-- || 'AND po.order_date >= lu.implement_date '
|| 'AND po.order_date >= (SELECT min(implement_date) FROM bcf_lookup) '
|| 'AND po.submitted_flag = 1 '
|| 'AND po.channel_code = ''BCF'' '
-- When we are looking at all orders then we are not going to restrict it by group
v_group_where := ' ';
-- This is used where the search type requires searching by the Open, Closed, and Cancelled status.
-- We are binding the three status variables so that they can be cached in Oracle and not need to be parsed after
-- the first search of a search type is done.
v_status_where := ' '
|| 'AND bcf_fulfillment.get_order_status(po.order_id,' || v_group_for_search|| ') '
|| 'IN (:v_open_status, :v_requested_status, :v_cancelled_status, :v_closed_status) '
ELSE
-- This is the core tables used by most search types
v_sql_from := ' '
|| 'FROM product_order po'
|| ',bcf_product_order_groups pog '
-- This is the core table join needed for most search types
v_sql_where := ' '
|| 'WHERE 1 = 1 '
|| 'AND po.order_id = pog.order_id '
|| 'AND po.channel_code = ''BCF'' '
-- This is used only where the search type requires searching by a group.
v_group_where := ' '
|| 'AND pog.group_id = ' || v_group_for_search
-- This is used where the search type requires searching by the Open, Closed, and Cancelled status.
-- We are binding the three status variables so that they can be cached in Oracle and not need to be parsed after
-- the first search of a search type is done.
v_status_where := ' '
|| 'AND pog.dn_status IN (:v_open_status, :v_requested_status, :v_cancelled_status, :v_closed_status) '
END IF;
-- If an employee_id is provided then we need to add in a where clause so that only orders that belong to that
-- employee are pulled
IF v_employee_id_in > 0
THEN
v_sql_where := v_sql_where
|| 'AND pog.dn_employee_id = ' || TO_CHAR(v_employee_id_in) || ' '
END IF;
IF v_group_id_in = get_group_fulfillment_center1
THEN
v_sql_order_by := 'ORDER BY '
|| 'bcf_fulfillment.get_division_count (po.order_id,' || v_group_for_search || ') '
|| ',bcf_fulfillment.get_divisions(po.order_id,' || v_group_for_search || ') '
|| ',po.order_id '
ELSIF v_group_id_in = c_GROUP_FULFILLMENT_CENTER_212
THEN
v_sql_order_by := 'ORDER BY '
|| 'bcf_fulfillment.get_shipping_priority(po.order_id,' || v_group_for_search || ') DESC'
|| ',TRUNC(po.order_date)'
|| ',bcf_fulfillment.get_line_item_count(po.order_id,' || v_group_for_search || ')'
|| ',decode('||v_group_id_in||',4,substr(bcf_locator.get_first_location(po.order_id,'||v_group_id_in||'),3),null)'
|| ',po.order_id'
ELSE
v_sql_order_by := 'ORDER BY '
|| ' bcf_fulfillment.get_shipping_priority(po.order_id,' || v_group_for_search || ') DESC'
|| ',chain_codes DESC'
|| ',po.order_id '
END IF;
IF UPPER(v_search_type_in) = 'ORDERNUMBER'
THEN
v_sql_where := v_sql_where || v_group_where
|| 'AND po.order_id = :v_search_value1_in '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where
USING v_search_value1_in;
ELSIF UPPER(v_search_type_in) = 'STATUSONLY'
THEN
v_sql_where := v_sql_where || v_group_where || v_status_where
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_open_status, v_requested_status, v_cancelled_status, v_closed_status;
ELSIF UPPER(v_search_type_in) = 'BILLINGNAME'
THEN
v_upper_search_value1 := UPPER(v_search_value1_in);
v_sql_where := v_sql_where || ' ' || v_group_where
|| 'AND po.upper_billing_name LIKE ''%'' || :v_upper_search_value1 || ''%'' '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_upper_search_value1;
ELSIF UPPER(v_search_type_in) = 'GROUP'
THEN
IF v_search_value1_in = '0' -- Unassigned
THEN
v_sql_from := v_sql_from || ' ,product_order_detail_actv_v pod ';
v_sql_where := v_sql_where || ' ' || v_status_where
|| 'AND po.order_id = pod.order_id '
|| 'AND pod.group_id IS NULL '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT DISTINCT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_open_status, v_requested_status, v_cancelled_status, v_closed_status;
ELSE
v_sql_where := v_sql_where || ' ' || v_status_where
|| 'AND pog.group_id = :v_group_for_search '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_open_status, v_requested_status, v_cancelled_status, v_closed_status, v_group_for_search;
END IF;
ELSIF UPPER(v_search_type_in) = 'SHIPPINGNAME'
THEN
v_upper_search_value1 := UPPER(v_search_value1_in);
v_sql_where := v_sql_where || ' ' || v_group_where
|| 'AND po.upper_shipping_name LIKE ''%'' || :v_upper_search_value1 || ''%'' '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_upper_search_value1;
ELSIF UPPER(v_search_type_in) = 'USERNAME'
THEN
v_lower_search_value1 := LOWER(v_search_value1_in);
v_sql_from := v_sql_from || ' ,sxweb01.customer c ';
v_sql_where := v_sql_where || ' ' || v_group_where
|| 'AND po.customer_id = c.customer_id '
|| 'AND c.username LIKE ''%'' || :v_lower_search_value1 || ''%'' '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_lower_search_value1;
ELSIF UPPER(v_search_type_in) = 'BILLINGADDRESS1'
THEN
v_upper_search_value1 := UPPER(v_search_value1_in);
v_sql_from := v_sql_from || ' ,order_payment op '
|| ' ,credit_card cc '
|| ' ,om_address oma '
v_sql_where := v_sql_where || ' ' || v_group_where
|| 'AND po.order_id = op.business_object_id '
|| 'AND op.business_object_type = ''ORDR'' '
|| 'AND op.payment_method = ''CRCD'' '
|| 'AND op.payment_method_id = cc.credit_card_id '
|| 'AND cc.address_id = oma.address_id '
|| 'AND UPPER(oma.address1) LIKE ''%'' || :v_upper_search_value1 || ''%'' '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_upper_search_value1;
ELSIF UPPER(v_search_type_in) = 'SHIPPINGADDRESS1'
THEN
v_upper_search_value1 := UPPER(v_search_value1_in);
v_sql_from := v_sql_from || ' ,shipping_info si '
|| ' ,om_address oma '
v_sql_where := v_sql_where || ' ' || v_group_where
|| 'AND po.order_id = si.order_id '
|| 'AND si.ship_to_address_id = oma.address_id '
|| 'AND UPPER(oma.address1) LIKE ''%'' || :v_upper_search_value1 || ''%'' '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_upper_search_value1;
ELSIF UPPER(v_search_type_in) = 'BILLINGPHONE'
THEN
v_sql_from := v_sql_from || ' ,order_payment op '
|| ' ,credit_card cc '
v_sql_where := v_sql_where || ' ' || v_group_where
|| 'AND po.order_id = op.business_object_id '
|| 'AND op.business_object_type = ''ORDR'' '
|| 'AND op.payment_method = ''CRCD'' '
|| 'AND op.payment_method_id = cc.credit_card_id '
|| 'AND cc.home_phone = :v_search_value1_in '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_search_value1_in;
ELSIF UPPER(v_search_type_in) = 'SHIPPINGPHONE'
THEN
v_sql_from := v_sql_from || ' ,shipping_info si '
v_sql_where := v_sql_where || ' ' || v_group_where
|| 'AND po.order_id = si.order_id '
|| 'AND si.ship_phone = :v_search_value1_in '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_search_value1_in;
ELSIF UPPER(v_search_type_in) = 'CREDITCARDNUMBER'
THEN
v_sql_from := v_sql_from || ' ,order_payment op '
|| ' ,credit_card cc '
v_sql_where := v_sql_where || ' ' || v_group_where
|| 'AND po.order_id = op.business_object_id '
|| 'AND op.business_object_type = ''ORDR'' '
|| 'AND op.payment_method = ''CRCD'' '
|| 'AND op.payment_method_id = cc.credit_card_id '
|| 'AND cc.credit_card_number = :v_search_value1_in '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_search_value1_in;
ELSIF UPPER(v_search_type_in) = 'PONUMBER'
THEN
v_sql_from := ' '
|| 'FROM ' || ' product_order_detail_actv_v pod ,' || SUBSTR(v_sql_from, 6);
v_sql_where := v_sql_where || v_group_where
|| 'AND pod.po_no = :v_search_value1_in '
|| 'AND po.order_id = pod.order_id '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT /*+ ORDERED */ DISTINCT ' || v_sql_select || v_sql_from || v_sql_where
USING v_search_value1_in;
ELSIF UPPER(v_search_type_in) = 'USERASSIGNED'
THEN
IF v_search_value1_in = '0' -- 'Unassigned'
THEN
v_sql_where := v_sql_where || ' ' || v_group_where || ' ' || v_status_where
|| 'AND pog.unassigned_flag = ''Y'' '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_open_status, v_requested_status, v_cancelled_status, v_closed_status;
ELSE
v_sql_where := v_sql_where || ' ' || v_group_where || ' ' || v_status_where
|| 'AND pog.dn_employee_id = :v_search_value1_in '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_open_status, v_requested_status, v_cancelled_status, v_closed_status, v_search_value1_in;
END IF;
ELSIF UPPER(v_search_type_in) = 'ORDERDATE'
THEN
v_sql_where := v_sql_where || ' ' || v_group_where || ' ' || v_status_where
|| 'AND po.order_date BETWEEN TO_DATE( :v_search_value1_in, ''MON DD YYYY HH24:MI:SS'') AND TO_DATE( :v_search_value2_in ,''MON DD YYYY HH24:MI:SS'') '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_open_status, v_requested_status, v_cancelled_status, v_closed_status, v_search_value1_in, v_search_value2_in;
ELSIF UPPER(v_search_type_in) = 'PRINTJOB'
THEN
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select
|| ' '
|| 'FROM product_order po '
|| ' ,bcf_print_jobs pj '
|| 'WHERE 1 = 1 '
|| 'AND pj.order_id = po.order_id '
|| 'AND pj.username = :v_search_value1_in '
|| 'AND pj.create_date = TO_DATE( :v_search_value2_in,''MON DD YYYY HH24:MI:SS'') '
|| v_sql_order_by
USING v_search_value1_in, v_search_value2_in;
ELSIF UPPER(v_search_type_in) = 'FULFILLMENTTYPE'
THEN
v_sql_from := v_sql_from || ' ,product_order_detail_actv_v pod ';
v_sql_where := v_sql_where || ' ' || v_group_where || ' ' || v_status_where
|| 'AND pod.order_id = po.order_id '
-- Because we have to drill down the the POD level
-- we now need to ensure the pod records match on group
|| 'AND pod.group_id = ' || v_group_for_search
-- We curr. have 3 fufillment types FC165, FC212, FCBABY
-- so substr on 1st char works for Garry
|| 'AND UPPER(SUBSTR(pod.fulfillment_type,1,1)) = UPPER(:v_search_value1_in) '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT DISTINCT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_open_status, v_requested_status, v_cancelled_status, v_closed_status, v_search_value1_in;
ELSIF UPPER(v_search_type_in) = 'INSUFFICIENTAUTHORIZATION'
THEN
v_sql_where := v_sql_where
|| 'AND bcf_get_authorization_amount(po.order_id) > 0'
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by;
END IF;
END order_search;
Thanks
V
Edited by: vishal patel on Oct 23, 2008 3:59 PMPROCEDURE order_search
v_search_type_in IN VARCHAR2
,v_search_value1_in IN VARCHAR2 DEFAULT 'NONE'
,v_search_value2_in IN VARCHAR2 DEFAULT 'NONE'
,v_group_id_in IN bcf_groups.group_id%TYPE DEFAULT 0
,v_open_in IN NUMBER DEFAULT 0
,v_requested_in IN NUMBER DEFAULT 0
,v_cancelled_in IN NUMBER DEFAULT 0
,v_closed_in IN NUMBER DEFAULT 0
,v_employee_id_in IN sxweb00.customer.customer_id%TYPE DEFAULT 0
,outcursor IN OUT FulfillmentCurType
IS
v_status_code NUMBER;
v_upper_search_value1 VARCHAR2(500);
v_lower_search_value1 VARCHAR2(500);
v_open_status VARCHAR2(10);
v_closed_status VARCHAR2(10);
v_cancelled_status VARCHAR2(10);
v_requested_status VARCHAR2(10);
v_group_for_search bcf_groups.group_id%TYPE;
v_sql_select VARCHAR2(4000);
v_sql_from VARCHAR2(4000);
v_sql_where VARCHAR2(4000);
v_sql_order_by VARCHAR2(4000);
v_group_where VARCHAR2(100);
v_status_where VARCHAR2(500);
BEGIN
IF v_open_in = 1 THEN
v_open_status := 'OPEN';
END IF;
IF v_closed_in = 1 THEN
v_closed_status := 'CLOSED';
END IF;
IF v_cancelled_in = 1 THEN
v_cancelled_status := 'CANCELLED';
END IF;
IF v_requested_in = 1 THEN
v_requested_status := 'REQUESTED';
END IF;
IF UPPER(v_search_type_in) = 'GROUP'
THEN
v_group_for_search := v_search_value1_in;
ELSE
v_group_for_search := v_group_id_in;
END IF;
-- This is the select statement used for all search types
v_sql_select := ' '
|| 'po.order_id order_id '
|| ',decode('||v_group_id_in||',4,substr(bcf_locator.get_first_location(po.order_id,'||v_group_id_in||'),3),null) first_location '
|| ',TO_CHAR(po.order_date, ''mm/dd/yyyy'') order_date '
|| ',' || v_group_for_search || ' group_id '
|| ',TRIM(TO_CHAR(bcf_fulfillment.get_shipping_total(po.order_id,' || v_group_for_search || ') + bcf_fulfillment.get_tax_total(po.order_id,' || v_group_for_search || ') + bcf_fulfillment.get_subtotal(po.order_id,' || v_group_for_search || ') ,''$999,999,999,999,999,990.99'')) total '
|| ',bcf_fulfillment.get_billing_name (po.customer_id) billing_name '
|| ',bcf_fulfillment.get_open_and_assigned_count(po.order_id,' || v_group_for_search || ') open_and_assigned_count '
|| ',bcf_fulfillment.get_divisions(po.order_id,' || v_group_for_search || ') divisions '
|| ',bcf_fulfillment.get_division_count (po.order_id,' || v_group_for_search || ' ) division_count '
|| ',bcf_fulfillment.get_picker_list (po.order_id,' || v_group_for_search || ') picker_name '
|| ',bcf_fulfillment.get_picker_count (po.order_id,' || v_group_for_search || ') picker_count '
|| ',bcf_fulfillment.get_order_status(po.order_id,' || v_group_for_search || ') order_status '
|| ',po.customer_id customer_id '
-- IF there is only one unique picker then that means there are no unassigned or NULL pickers
-- therefore by default the checkbox should not be selected else the count picker_count is
-- 0 or > 1 meaning that at least one line item has an unassigned employee_id and by default
-- the checkbox should be selected
|| ',DECODE(bcf_fulfillment.get_picker_count(po.order_id,' || v_group_for_search || '),1 ,0,1) print_cb '
|| ',bcf_fulfillment.get_fulfillment_codes(po.order_id,' || v_group_for_search || ') fulfillment_types '
|| ',bcf_fulfillment.has_group_been_reassigned(po.order_id,' || v_group_for_search || ') group_reassigned_flag '
|| ',bcf_fulfillment.get_chain_codes(po.order_id,' || v_group_for_search || ') chain_codes '
|| ',po.status_id order_status_id '
|| ',bcf_fulfillment.get_viewed_by_picker_flag(po.order_id,' || v_group_for_search || ') viewed_by_picker_flag '
|| ',bcf_fulfillment.get_picker_list (po.order_id,' || v_group_for_search || ', ''N'') pickers_without_unassigned '
|| ',bcf_fulfillment.get_group_list (po.order_id) group_list '
|| ',bcf_fulfillment.get_line_item_count(po.order_id,' || v_group_for_search || ') line_item_count '
|| ',bcf_fulfillment.get_shipping_priority(po.order_id,' || v_group_for_search || ') shipping_priority'
-- Anna wants all users to know and always wants to know no matter what the status of the auth or order
|| ',(SELECT decode(count(*),0,''N'',''Y'') FROM bcf_payment WHERE ics_rflag = ''DAVSNO'' AND order_id = po.order_id AND status_code IN (''ATH2'',''FUL2'',''CPT0'',''CPT2'')) avs_failed'
|| ',trunc(po.order_date) date_for_sort'
-- When we need to look at all orders then the v_group_for_search will be zero i.e. customer service rep
IF v_group_for_search = 0 THEN
-- This is the core tables used by most search types
v_sql_from := ' '
|| 'FROM product_order po'
-- || ',bcf_lookup lu'
-- This is the core table join needed for most search types
v_sql_where := ' '
|| 'WHERE 1 = 1 '
-- No orders will be looked at for fulfillment purposes that occurred before the minimum
-- shipping cost functionality was added
-- || 'AND po.order_date >= lu.implement_date '
|| 'AND po.order_date >= (SELECT min(implement_date) FROM bcf_lookup) '
|| 'AND po.submitted_flag = 1 '
|| 'AND po.channel_code = ''BCF'' '
-- When we are looking at all orders then we are not going to restrict it by group
v_group_where := ' ';
-- This is used where the search type requires searching by the Open, Closed, and Cancelled status.
-- We are binding the three status variables so that they can be cached in Oracle and not need to be parsed after
-- the first search of a search type is done.
v_status_where := ' '
|| 'AND bcf_fulfillment.get_order_status(po.order_id,' || v_group_for_search|| ') '
|| 'IN (:v_open_status, :v_requested_status, :v_cancelled_status, :v_closed_status) '
ELSE
-- This is the core tables used by most search types
v_sql_from := ' '
|| 'FROM product_order po'
|| ',bcf_product_order_groups pog '
-- This is the core table join needed for most search types
v_sql_where := ' '
|| 'WHERE 1 = 1 '
|| 'AND po.order_id = pog.order_id '
|| 'AND po.channel_code = ''BCF'' '
-- This is used only where the search type requires searching by a group.
v_group_where := ' '
|| 'AND pog.group_id = ' || v_group_for_search
-- This is used where the search type requires searching by the Open, Closed, and Cancelled status.
-- We are binding the three status variables so that they can be cached in Oracle and not need to be parsed after
-- the first search of a search type is done.
v_status_where := ' '
|| 'AND pog.dn_status IN (:v_open_status, :v_requested_status, :v_cancelled_status, :v_closed_status) '
END IF;
-- If an employee_id is provided then we need to add in a where clause so that only orders that belong to that
-- employee are pulled
IF v_employee_id_in > 0
THEN
v_sql_where := v_sql_where
|| 'AND pog.dn_employee_id = ' || TO_CHAR(v_employee_id_in) || ' '
END IF;
IF v_group_id_in = get_group_fulfillment_center1
THEN
v_sql_order_by := 'ORDER BY '
|| 'bcf_fulfillment.get_division_count (po.order_id,' || v_group_for_search || ') '
|| ',bcf_fulfillment.get_divisions(po.order_id,' || v_group_for_search || ') '
|| ',po.order_id '
ELSIF v_group_id_in = c_GROUP_FULFILLMENT_CENTER_212
THEN
v_sql_order_by := 'ORDER BY '
|| 'bcf_fulfillment.get_shipping_priority(po.order_id,' || v_group_for_search || ') DESC'
|| ',TRUNC(po.order_date)'
|| ',bcf_fulfillment.get_line_item_count(po.order_id,' || v_group_for_search || ')'
|| ',decode('||v_group_id_in||',4,substr(bcf_locator.get_first_location(po.order_id,'||v_group_id_in||'),3),null)'
|| ',po.order_id'
ELSE
v_sql_order_by := 'ORDER BY '
|| ' bcf_fulfillment.get_shipping_priority(po.order_id,' || v_group_for_search || ') DESC'
|| ',chain_codes DESC'
|| ',po.order_id '
END IF;
IF UPPER(v_search_type_in) = 'ORDERNUMBER'
THEN
v_sql_where := v_sql_where || v_group_where
|| 'AND po.order_id = :v_search_value1_in '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where
USING v_search_value1_in;
ELSIF UPPER(v_search_type_in) = 'STATUSONLY'
THEN
v_sql_where := v_sql_where || v_group_where || v_status_where
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_open_status, v_requested_status, v_cancelled_status, v_closed_status;
ELSIF UPPER(v_search_type_in) = 'BILLINGNAME'
THEN
v_upper_search_value1 := UPPER(v_search_value1_in);
v_sql_where := v_sql_where || ' ' || v_group_where
|| 'AND po.upper_billing_name LIKE ''%'' || :v_upper_search_value1 || ''%'' '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_upper_search_value1;
ELSIF UPPER(v_search_type_in) = 'GROUP'
THEN
IF v_search_value1_in = '0' -- Unassigned
THEN
v_sql_from := v_sql_from || ' ,product_order_detail_actv_v pod ';
v_sql_where := v_sql_where || ' ' || v_status_where
|| 'AND po.order_id = pod.order_id '
|| 'AND pod.group_id IS NULL '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT DISTINCT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_open_status, v_requested_status, v_cancelled_status, v_closed_status;
ELSE
v_sql_where := v_sql_where || ' ' || v_status_where
|| 'AND pog.group_id = :v_group_for_search '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_open_status, v_requested_status, v_cancelled_status, v_closed_status, v_group_for_search;
END IF;
ELSIF UPPER(v_search_type_in) = 'SHIPPINGNAME'
THEN
v_upper_search_value1 := UPPER(v_search_value1_in);
v_sql_where := v_sql_where || ' ' || v_group_where
|| 'AND po.upper_shipping_name LIKE ''%'' || :v_upper_search_value1 || ''%'' '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_upper_search_value1;
ELSIF UPPER(v_search_type_in) = 'USERNAME'
THEN
v_lower_search_value1 := LOWER(v_search_value1_in);
v_sql_from := v_sql_from || ' ,sxweb01.customer c ';
v_sql_where := v_sql_where || ' ' || v_group_where
|| 'AND po.customer_id = c.customer_id '
|| 'AND c.username LIKE ''%'' || :v_lower_search_value1 || ''%'' '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_lower_search_value1;
ELSIF UPPER(v_search_type_in) = 'BILLINGADDRESS1'
THEN
v_upper_search_value1 := UPPER(v_search_value1_in);
v_sql_from := v_sql_from || ' ,order_payment op '
|| ' ,credit_card cc '
|| ' ,om_address oma '
v_sql_where := v_sql_where || ' ' || v_group_where
|| 'AND po.order_id = op.business_object_id '
|| 'AND op.business_object_type = ''ORDR'' '
|| 'AND op.payment_method = ''CRCD'' '
|| 'AND op.payment_method_id = cc.credit_card_id '
|| 'AND cc.address_id = oma.address_id '
|| 'AND UPPER(oma.address1) LIKE ''%'' || :v_upper_search_value1 || ''%'' '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_upper_search_value1;
ELSIF UPPER(v_search_type_in) = 'SHIPPINGADDRESS1'
THEN
v_upper_search_value1 := UPPER(v_search_value1_in);
v_sql_from := v_sql_from || ' ,shipping_info si '
|| ' ,om_address oma '
v_sql_where := v_sql_where || ' ' || v_group_where
|| 'AND po.order_id = si.order_id '
|| 'AND si.ship_to_address_id = oma.address_id '
|| 'AND UPPER(oma.address1) LIKE ''%'' || :v_upper_search_value1 || ''%'' '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_upper_search_value1;
ELSIF UPPER(v_search_type_in) = 'BILLINGPHONE'
THEN
v_sql_from := v_sql_from || ' ,order_payment op '
|| ' ,credit_card cc '
v_sql_where := v_sql_where || ' ' || v_group_where
|| 'AND po.order_id = op.business_object_id '
|| 'AND op.business_object_type = ''ORDR'' '
|| 'AND op.payment_method = ''CRCD'' '
|| 'AND op.payment_method_id = cc.credit_card_id '
|| 'AND cc.home_phone = :v_search_value1_in '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_search_value1_in;
ELSIF UPPER(v_search_type_in) = 'SHIPPINGPHONE'
THEN
v_sql_from := v_sql_from || ' ,shipping_info si '
v_sql_where := v_sql_where || ' ' || v_group_where
|| 'AND po.order_id = si.order_id '
|| 'AND si.ship_phone = :v_search_value1_in '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_search_value1_in;
ELSIF UPPER(v_search_type_in) = 'CREDITCARDNUMBER'
THEN
v_sql_from := v_sql_from || ' ,order_payment op '
|| ' ,credit_card cc '
v_sql_where := v_sql_where || ' ' || v_group_where
|| 'AND po.order_id = op.business_object_id '
|| 'AND op.business_object_type = ''ORDR'' '
|| 'AND op.payment_method = ''CRCD'' '
|| 'AND op.payment_method_id = cc.credit_card_id '
|| 'AND cc.credit_card_number = :v_search_value1_in '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_search_value1_in;
ELSIF UPPER(v_search_type_in) = 'PONUMBER'
THEN
v_sql_from := ' '
|| 'FROM ' || ' product_order_detail_actv_v pod ,' || SUBSTR(v_sql_from, 6);
v_sql_where := v_sql_where || v_group_where
|| 'AND pod.po_no = :v_search_value1_in '
|| 'AND po.order_id = pod.order_id '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT /*+ ORDERED */ DISTINCT ' || v_sql_select || v_sql_from || v_sql_where
USING v_search_value1_in;
ELSIF UPPER(v_search_type_in) = 'USERASSIGNED'
THEN
IF v_search_value1_in = '0' -- 'Unassigned'
THEN
v_sql_where := v_sql_where || ' ' || v_group_where || ' ' || v_status_where
|| 'AND pog.unassigned_flag = ''Y'' '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_open_status, v_requested_status, v_cancelled_status, v_closed_status;
ELSE
v_sql_where := v_sql_where || ' ' || v_group_where || ' ' || v_status_where
|| 'AND pog.dn_employee_id = :v_search_value1_in '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_open_status, v_requested_status, v_cancelled_status, v_closed_status, v_search_value1_in;
END IF;
ELSIF UPPER(v_search_type_in) = 'ORDERDATE'
THEN
v_sql_where := v_sql_where || ' ' || v_group_where || ' ' || v_status_where
|| 'AND po.order_date BETWEEN TO_DATE( :v_search_value1_in, ''MON DD YYYY HH24:MI:SS'') AND TO_DATE( :v_search_value2_in ,''MON DD YYYY HH24:MI:SS'') '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_open_status, v_requested_status, v_cancelled_status, v_closed_status, v_search_value1_in, v_search_value2_in;
ELSIF UPPER(v_search_type_in) = 'PRINTJOB'
THEN
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select
|| ' '
|| 'FROM product_order po '
|| ' ,bcf_print_jobs pj '
|| 'WHERE 1 = 1 '
|| 'AND pj.order_id = po.order_id '
|| 'AND pj.username = :v_search_value1_in '
|| 'AND pj.create_date = TO_DATE( :v_search_value2_in,''MON DD YYYY HH24:MI:SS'') '
|| v_sql_order_by
USING v_search_value1_in, v_search_value2_in;
ELSIF UPPER(v_search_type_in) = 'FULFILLMENTTYPE'
THEN
v_sql_from := v_sql_from || ' ,product_order_detail_actv_v pod ';
v_sql_where := v_sql_where || ' ' || v_group_where || ' ' || v_status_where
|| 'AND pod.order_id = po.order_id '
-- Because we have to drill down the the POD level
-- we now need to ensure the pod records match on group
|| 'AND pod.group_id = ' || v_group_for_search
-- We curr. have 3 fufillment types FC165, FC212, FCBABY
-- so substr on 1st char works for Garry
|| 'AND UPPER(SUBSTR(pod.fulfillment_type,1,1)) = UPPER(:v_search_value1_in) '
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT DISTINCT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by
USING v_open_status, v_requested_status, v_cancelled_status, v_closed_status, v_search_value1_in;
ELSIF UPPER(v_search_type_in) = 'INSUFFICIENTAUTHORIZATION'
THEN
v_sql_where := v_sql_where
|| 'AND bcf_get_authorization_amount(po.order_id) > 0'
IF (outcursor%ISOPEN) THEN
CLOSE outcursor;
END IF;
OPEN outcursor FOR
'SELECT ' || v_sql_select || v_sql_from || v_sql_where || v_sql_order_by;
END IF;
END order_search;
-- -
Itunes Using like 90% of the CPU
When importing songs from CD, I am noticing that I am no longer able to listen to songs while importing without very choppy audio. Also, though I have a 3 Ghz processor, Itunes is using like 70-90% of the CPU when importing CDs. This has never happened before, with previous versions of ITunes. It started happening right after an install of ITunes 6. I had previously had five and four, which both worked fine. Here's what CD Diagnostics had to say:
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
GATEWAY 831GM
iTunes 6.0.1.3
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: Cdr4_xp (7.1.0.188), PxHelp20 (2.0.0.0),
UpperFilters: Cdralw2k (7.1.0.188), GEARAspiWDM (2.0.4.3),
Video Driver: Intel(R) 82915G/GV/910GL Express Chipset Family\Intel(R) 82915G/GV/910GL Express Chipset Controller
Found aspi32 running.
Any Ideas as to what the Problem could be?
Peace,
MDMc.Well, I've discovered the Secret to Importing Using ITunes for Windows!
You just use media player to import, and then add that folder to your library!
No, seriously though, this is a real problem. I've tried everything from using only one of the CPUs, to actually disabling HyperThreading in the BIOS, to setting the priority to low, to RealTime, etc.
I did find out that there was a driver update to the M-Audio Hardware I was using, and was hoping that would solve the issue, as someone had suggested, but no avail.
Like I said, it occurred right after I upgraded to ITunes 6, and I had had no problems like this with four or five.
I followed the windows help file, I followed the Apple Help files on a few issues, and none of them solved the problem. Someone please let me know if an update becomes available.
Peace,
Matthew. -
Using LIKE with a variable in a report query
Probably an stupid question, but I can't find the answer on this forum or by trying. How do use LIKE and a variable together in a query?
The following solutions don't work f.e.:
LIKE :P310_ENTITEITID%
LIKE ':P310_ENTITEITID%'Hi Elmo
Try '%'||:P310_ENTITEITID||'%'
Elsie -
Wipe ipad after each use (like invited account)
How wipe ipad data after each use (like invited account on MacOs)?
Sorry, but assuming you mean that you want it to wipe automatically, that's not a feature of iOS (except the data wipe that can happen as a security feature after multiple incorrect passcode attempts). If you want to wipe an iPad, you have to do it manually.
Regards. -
I want to give my old iPhone 4 to my grandson to use like an iPod Touch. Wifi only. How do I deactivate my info..so he can buy his own apps. and not have the cloud pushing all of my data to my old phone?
Just turning off Cloud will not prevent him from turning it back on.
Rignt now, if he uses the App store, iTunes thinks it's talking to me.First, turn off iMessage, FaceTime & delete the iCloud account, while your sim is still in the phone. Then: Settings>General>Reset>Erase All Content & Settings. Give it to your grandson & he gat then set it up as he wants.
Important your turn iMessage & FaceTime off to disassociate the phone from your Apple ID. Apple "claims" to have fixed this with iOS 6.0, but until I can absolutely confirm such, I still recommend you turn all of that stuff off first. -
I'm trying to free up space on my iPhone, and messages is using the most. I deleted all my messages and the settings still shows that it's using like 3 GB. Is there a way to get that space back?
Go into iTunes store, open account and check purchases
Then re download that you have purchased though iTunes -
Problem in JDBC , when using LIKE operator. - VERY URGENT
Problem in JDBC , when using LIKE operator.
LINE 1 : String temp = "AA";
LINE 2 : String query = "select * from emp where EMPNAME like '*temp*' ";
LINE 3 : Staement st = con.createStaement();
LINE 4 : ResultSet rs = st.executeQuery(query);
'*' character is not getting evaluated. In MS ACCESS2000 only * is accepted instead of '%'. Moreover in MS ACCESS the like operator has to be used within double quotes as a String. whereas in other databases, it accepts single quotes as a String.
Ex:
In MS ACCESS
select * from emp where ename like "*aa*";
Other Databases
select * from emp where ename like '%aa%';
In my situation iam passing a Variable inside a like operator and '*' is used.
For the above Scenario, Please help me out.
If possible Kindly let me know the exact Syntax.
Please give me the answer as LINE1,LINE2,LINE3,LINE4,
I have verified in JDBC Spec also, it has been specified to use escape sequence.that too did not work.
Due to this, My project is in hold for about 4 days. I could not find a suitable solution.
Please help me out.I made a LIKE clause work with M$ Access, using PreparedStatement and the % wildcard:
escapeStr = "%";
String sql = "SELECT USERNAME, PASSWORD FROM USERS WHERE USERNAME LIKE ?";
PreparedStatement statement = connection.prepareStatement(sql);
statement.setString(1, ("user" + escapeStr));
ResultSet resultSet = statement.executeQuery();
while (resultSet.next())
System.out.println("username: " + resultSet.getObject("USERNAME") + " password: " + resultSet.getObject("PASSWORD")); -
Using Like Clause in Prepared Statement
Hi,
I want to use LIKE clause in prepared statement. This is not returning any record.
This is the query. Please help me in this.
SELECT EMPLYR_GRP,EMPLYR_GRP_NAME FROM EMPLOYER_GROUP WHERE EMPLYR_GRP_NAME LIKE ? AND EMPLYR_GRP = ?
This is giving Oracle SQL Error.
SELECT EMPLYR_GRP,EMPLYR_GRP_NAME FROM EMPLOYER_GROUP WHERE EMPLYR_GRP_NAME LIKE %?% AND EMPLYR_GRP = ?The first variant should work just fine as long as you use stmt.setString(1, '%' + pattern + '%') to set the parameter. The second query is just plain wrong.
Alin. -
How to write statement using LIKE statement in jsp
hi
I am new to jsp. I would like to retrive the data from database using like command. But my query dosen't work well. Can you help me in this topic.
String name = request.getParameter("username");
int i = st.executeQuery("select * from emp where empname LIKE '%name%'");
Plase help me..
Thanking you
sure...Using LIKE :
==========
The following SQL statement will return persons with first names that start with an 'O':
SELECT * FROM Persons
WHERE FirstName LIKE 'O%'
The following SQL statement will return persons with first names that contain the pattern 'la':
SELECT * FROM Persons
WHERE FirstName LIKE '%la%'
Hope this might have helped you
REGARDS,
RaHuL -
Why CBO don't use function-base index when I use like and bind variable
Hello
I have litle problem with function-base index and like with bind variable.
When I use like with bind variable, the CBO don't use my function-base index.
For example when I create table and index:
ALTER SESSION SET NLS_SORT='BINARY_CI';
ALTER SESSION SET NLS_COMP='LINGUISTIC';
alter session set nls_language='ENGLISH';
-- DROP TABLE TEST1;
CREATE TABLE TEST1 (K1 VARCHAR2(32));
create index test1_idx on test1(nlssort(K1,'nls_sort=BINARY_CI'));
INSERT INTO TEST1
SELECT OBJECT_NAME FROM ALL_OBJECTS;
COMMIT;
When I run:
ALTER SESSION SET NLS_SORT='BINARY_CI';
ALTER SESSION SET NLS_COMP='LINGUISTIC';
SELECT * FROM TEST1 WHERE K1 = 'abcd';
or
SELECT * FROM TEST1 WHERE K1 LIKE 'abcd%';
CBO use index.
PLAN_TABLE_OUTPUT
SQL_ID 4vrmp7cshbvqy, child number 1
SELECT * FROM TEST1 WHERE K1 LIKE 'abcd%'
Plan hash value: 1885706448
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | | | 1 (100)| |
| 1 | TABLE ACCESS BY INDEX ROWID| TEST1 | 2 | 98 | 1 (0)| 00:00:01 |
|* 2 | INDEX RANGE SCAN | TEST1_IDX | 2 | | 1 (0)| 00:00:01 |
Predicate Information (identified by operation id):
2 - access("TEST1"."SYS_NC00002$">=HEXTORAW('6162636400') AND
"TEST1"."SYS_NC00002$"<HEXTORAW('6162636500') )
but when I run
SELECT * FROM TEST1 WHERE K1 LIKE :1;
CBO don't use index
PLAN_TABLE_OUTPUT
SQL_ID 9t461s1669gru, child number 0
SELECT * FROM TEST1 WHERE K1 LIKE :1
Plan hash value: 4122059633
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | | | 89 (100)| |
|* 1 | TABLE ACCESS FULL| TEST1 | 2 | 48 | 89 (3)| 00:00:02 |
Predicate Information (identified by operation id):
1 - filter("K1" LIKE :1)
What should I change to force CBO to use index.
I don't wont use index hint in query.
My oracle version:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - ProductionOK. But why if I create normal index (create index test1_idx on test1(K1)) and return to default nls settings this same query use index.
PLAN_TABLE_OUTPUT
SQL_ID 9t461s1669gru, child number 0
SELECT * FROM TEST1 WHERE K1 LIKE :1
Plan hash value: 598212486
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | | | 1 (100)| |
|* 1 | INDEX RANGE SCAN| TEST1_IDX | 1 | 18 | 1 (0)| 00:00:01 |
Predicate Information (identified by operation id):
1 - access("K1" LIKE :1)
filter("K1" LIKE :1)
Note
- dynamic sampling used for this statement (level=2)
when index is function-base (create index test1_idx on test1(nlssort(K1,'nls_sort=BINARY_CI')))
PLAN_TABLE_OUTPUT
SQL_ID 9t461s1669gru, child number 1
SELECT * FROM TEST1 WHERE K1 LIKE :1
Plan hash value: 4122059633
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | | | 89 (100)| |
|* 1 | TABLE ACCESS FULL| TEST1 | 3 | 54 | 89 (3)| 00:00:02 |
Predicate Information (identified by operation id):
1 - filter("K1" LIKE :1)
Note
- dynamic sampling used for this statement (level=2)
when I create index with upper function "index test1_idx on test1(upper(K1))" the query use index
SELECT * FROM TEST1 WHERE upper(K1) LIKE :1
Plan hash value: 1885706448
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | | | 1 (100)| |
| 1 | TABLE ACCESS BY INDEX ROWID| TEST1 | 4481 | 157K| 1 (0)| 00:00:01 |
|* 2 | INDEX RANGE SCAN | TEST1_IDX | 806 | | 1 (0)| 00:00:01 |
Predicate Information (identified by operation id):
2 - access("TEST1"."SYS_NC00002$" LIKE :1)
filter("TEST1"."SYS_NC00002$" LIKE :1)
Note
- dynamic sampling used for this statement (level=2) -
Hi experts,
I have a problem where i feel i should catch filtered resultset on to my internal table and i feel using LIKE.
But if i use LIKE '%AMIT%'
will it store
AMIT
amit
Amit ie all possible combination irrespectin of any case ?
Will it be case insenstive or not ?HI,
using like in select is case sensitive.
do like this for ignoring the case.
TABLES:mara.
SELECT * from mara.
IF mara-matnr cp 'm*'.
WRITE:/ mara-matnr.
ENDIF.
ENDSELECT.
rgds,
bharat. -
How to use like operator in loop
Hi I am trying to use like operation in loop condition. the code is as follows:
loop at lt_mara into l_mara where l_mara like '%XXX'.
endloop
when i have the like operator like above its giving me an error that i cannot use like operator. Is there anyway that i can use like operation in loop at condition,
Thanks in advanceusing the ranges with CP option we can do that..
Populate the ranges mentioned below..
data: r_matnr type range of matnr,
w_matnr like line of r_matnr.
w_matnr-low = '%XXX'.
w_matnr-sign = 'I'.
w_matnr-option = 'CP'.
append w_matnr to r_matnr.
loop at lt_mara into l_mara where matnr in r_matnr.
endloop
Regards
Vijay Babu Dudla -
How to use LIKE operator in plsql
Hi
I wanted to select certain rows using like operator in plsql(Input should be given by the user). I have given my experiment here .I couldn't get any result.
As per sql syntax while using LIKE operator we should give search criteria within single quote.where as in plsql if we give within single quote its takes as string so no output is comming.what is solution ? How to use like operator in plsql?
sql syntax
SQL>SELECT customer_name FROM customer_header
WHERE customer_name LIKE 'B%' ; customer_name
Bala murali
Babu
Basker
plsql syntax
PROCEDURE pro_custheader_like ( v_cname IN varchar2
,answer OUT type_refcur_customer) IS
BEGIN
OPEN answer FOR
SELECT customer_name FROM customer_header
WHERE customer_name LIKE ( ' v_cname ' );
END pro_custheader_like;
execution command
sql>variable answer refcursor;
sql>set serveroutput on
sql>exec package_name.pro_custheader_like( 'R',:answer);
plsql successfully completed
sql>print :answer
no row selected
by
balamuralikrishnan.splsql syntax
PROCEDURE pro_custheader_like ( v_cname IN
varchar2
,answer OUT
type_refcur_customer) IS
N
OPEN answer FOR
SELECT customer_name FROM customer_header
WHERE customer_name LIKE ( v_cname );
END pro_custheader_like;
Try it without any quotes. And, let us know your feedback.
Regards.
Satyaki De.
Message was edited by:
Satyaki_De
Maybe you are looking for
-
Please help with connecting a new iMac to an office windows based computer. I have checked everything and neither apple or microsoft support remote connections live.
-
Firefox hotkeys do not function correctly or at all when first loading a page. What is going on?
When i open a video in youtube the hotkeys do not function until i switch to another tab and then back again. Also i can't use the kotkeys to change the volume at all while i am tabbed into firefox.
-
Numerous Norton anti-virus error messages appear whenever I start my iMac.
Whenever I restart my new iMac I get approximately 10 NORTON AntiVirus Error messages which state: "Norton virus Auto-Protect could not continue. Please run Live Update or reinstall Norton Antivirus and Restart (Code: 10)." I've tried all these thing
-
I have developed few HTML pages for my Windows application, which I can test locally on my system using Microsoft Internet Explorer. However I wanted to test same pages in iPhone environment. Can anyone please suggest me what's the best way to test m
-
Some thing weird with my display
Since yesterday when I shut down my MBP or boot it up in the right hand top of the display where the date/time & Spotlight are for a few seconds I see some numbers and letters that are upside down and read backwards. It is not my system serial number