Decryption of Message after processing by File adapter

Hi,
Encrypted File> XI> Encrypted File
I have to pick up an encrypted file, decrypt it and do the message transformations & business process associated wiht it and place it in another folder by encrypting the file again.
How can i acheive this.?
Regards,
Siva Maranani.

Hi siva,
You can use Java Mapping or user-Modules to do this.
Go thru this link:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/unkown/webinars/how to handle unstructured source content for adapters/the pdf presentation of how to handle unstructured source content for adapters.pdf
Regards,
Sridhar

Similar Messages

Could'nt delete file after processing sender file in windows environment ?

Hi,
I have problem with sender file adapter in windows 2003 server, because the file adapter cannot delete the file after processing, seems like permission problem. but then i have set full controll access to the pi7adm (sap instance admin). but the problem still persist.
Please advise, me.
Thank you and Best Regards
Fernand

Hi,
Of course i set delete option in my CC sender, but the fail adapter couldn delete fail without any reason ?
This is the error message from RWB Could not delete file 'K:\WORKDIR\FTP\data\data1.fer1' after processing.
like i mention before i have set full access to sap admin user to the directory. but the error still persist.
any idea.
Cheers
Fernand

Unable to delete file after in a file adapter

Hello,
I have a BPEL process , which gets invoked when there is a new .PDX file in a folder. After processing the data from the file , I want to move into the archive folder. The process moves the file properly to the archive folder, but I am unable to delete the file from the folder I read it from.
One solution that worked was forcibly dehydrating the process using a checkpoint(). But that seems a very inefficient solution considering its expensive to do this step. Does any one else have a better solution?
Thanks

Just check the option "Delete after reading" in Adapter wizard if that is something you can do.. Adapter automatically deletes it once the file is moved to archive..

Get the filename after an outbound file adapter operation

Hello,
I am calling an outbound file adapter operation in BPEL (10.1.3.3) - using a filename mask with a sequence (i.e. po_%SEQ%.xml). I would like to provide the filename created at run-time (i.e. po_123.xml) to my BPEL process so I can send this in an e-mail. Is this possible?
Thanks in advance!
Rod
Message was edited by: Rod - fixed a typo
Rod Tunnels

Well, I took a different approach - which looks like it will work. Instead of letting the adapter decide the filename - I'm generating that in BPEL and passing that to the adapter using the header variable. So ... nevermind. ;-)

107 MB File - was not able to process thru File Adapter

Hi All,
I tried to send one 107 MB file using file adapter.
But was getting error as "not able to write on the integration server".It seemed like XI was not able to process file with that much size...as when we did split up the file into smaller ones ..those were processed....
I want to know what is the file size limit of File adapter......is there any way to send files with that much size from file adapter?
Can we do any file sizing exercise on XI servers?
Thanks.

Hi Henrique
Even the Zip Module doesnt help.
We had a similar case, when Xi was acting as a FTP. We thought we would use the Zip Module, etc but what we realise was even if you plan to use the Zip Module, the Entire File first needs to be loaded into the memory before the module can be called and the chances are that the j2EE stack goes down even before the module can be called.
We also explored the option of using the Jar command in the command line processing before message processing, even this has the same issue that , the Data is loaded into the memory of the j2ee stack and only then the command is executed and so even though the content was zipped, the actual content used by the file adapter was not the zipped content.
Regards
Bhavesh

After processing sender file is not deleting

Hi All,
I have configured the File-JDBC-File sync mode. the scenario is working fine upto last 2 days. but the problem is once the file picks and process its not deleting or archiving the file. but scenaio is working fine when i check in sxmb_moni but the error in sender file adaptor.
Could not delete file 'abc.dat' after processing: java.net.SocketException: Broken pipe.
in FTP server i have delete rights the other test scenario are working fine with out any error.
Please help me to reslove this issue.
Thanks,
Venkat

yes the processing mode is delete for sender communication chennal.
I have created the other test scenario to test the processing mode is delete its working for other communication chennal. and my scenario also worked upto last 2 days. i have done delta cache and also created the new communication chennal even no luck.
00:06:47 Success The message status set to DLNG.
22.04.2009 00:22:42 Success The application sent the message synchronously using connection File_http://sap.com/xi/XI/System. Returning to application.
22.04.2009 00:22:42 Success The message was successfully transmitted to endpoint http://SAPRtest.test.com:8047/sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System.
22.04.2009 00:22:42 Success The message status set to DLVD.
22.04.2009 00:23:12 Error Attempt to delete file "abc.dat" after processing failed. Retry
Please help me to reslove this.
Thanks,
Venkat.

How to get the read input file name in bpel process using File Adapter.

Hi,
I am reading a .txt file from configured directory using File Adapter.
I had configured file adapter to read file with naming pattern “SalesOrder.*\.txt”.
Now I had requirement to access the actual file name in bpel process eg: “SalesOrder123.txt”
How can I get the file name in bpel process.
Any help is appreciated.
Vidya.

1) create a variable of message type. Click on Browse Message type. Here you select Message Type-->Project WSDL Files -->fileAdapterInboundHeader-->Message Types-->Inboundheader_msg. Then click OK
2)Next dbl Click on teh receive Activity which is receing your File from teh File Adapter. Go to the Adapter Tab. Click on Browse variable and select the variable that you had just created above.
This would get the File name in the variable declared

Process Integration File adapter

file adaptor in PI was able to accumulate several messages into one file?
In other words, every 30 minutes or so, we will connect to any system to collect the documents. If I get there and find a list with 50 document, can I change the adaptor between ECC and PI to send the information as file instead of iDOC? Can this file have all 50 documents together instead of one file per PO, as the iDOC interface was going to do?

Let me clarify the question first. Please, correct me if anything doesn't make sense.
Every 30 minutes or so, our PI system will receive a burst of SOAP messages (xCBL format) from the provider transfering data to out ERP. The adapter between our PI and our ERP is an iDoc adapter. It means that, if in the 30 minutes interval I have 50 individual messages to receive, ( not one message with 50 documents ), PI will then create 50 iDocs in ERP (calling the iDoc import 50 times). This would be very resource consuming in our system (of course I am not talking only 50 and not for only one type of document).
The question is if we can change the iDoc adapter to ERP to a FILE adapter (custom format), and have this file adapter collect all messages into ONE unique file, describing 50 documents. This way, we can run a customized import program to process all 50 documens (or more) at once.
So, I don't want to convert the iDocs but to exchange it to batch file.
Clear as mud?

Exstream engine breaks after processing 5 file consecutively

I am facing issues with HP exstream software. The engine breaks after processing files, the software works fine only after restarting. Please help me in fixing this issue.

@Jothilingam
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

File processing in FIle adapter

Hi,
i have configured Sender File Adapter (FTP) in my scenario which picks the file from FTP folder and sends to JDBC.
now i have 2 flat files in my FTP (yesterdays and todays). file names are test_07062010 and test_08062010.
now my requirement is while processing the files, my file adapter has to process first file as test_07062010 and then test_08062010. but now it is processing first test_08062010 and then test_07062010. due to this yesterdays data is overwriting on todays data in Database.
i know we have some option in file sender adapter (NFS)...but i need to do with FTP file sender...please let me know how to proceed further.
Thanks in Advance.

Hi Praveen...thanks for reply
my communication channel is active all the days. but sometimes due to PI server down or some maintance we will stop channels.
that time file will not pick by file sender and it will be in FTP.then next day one more file will generate in FTP.
So my proble is while processing these files my sender file adapetr is processing todays file first and then yesterdays.due to this yesterdays data is overwriting on todays data.
can you tell me how to handle that in file adapter.

Alert if no file process :Same file adapter with same communication Channel

Hi XI Guru,
I have encountered 1 requirement from my client where, sender will send different data file with different file name. And there want XI to alert the user if no file to process for the schedule date. Please take note that the communication channel is common to all the sender.
Example:
Communication Channel : CC_FILE_SND
FILE_10.TXT ---> Every month on the 10, user have to send FILE_10.TXT to process
FILE_20.TXT ---> Every month on the 20, user have to send FILE_20.TXT to process
If user fail or forget to send the FILE_10.TXT and FILE_20.TXT on special schedule date to process, XI should alert user.
Many thanks

Hi Lord
<<< there want XI to alert the user if no file to process for the schedule date.
Can you tell me how you are planning to configure this schedule date in your sender file adapter. I mean this date will be fixed or it is going to be change according to the requirement.
Now for the second part in order to alert the user if file is not there, one solution is to use BPM with wait step ( specify the time in this step ), but then again it takes me back to my previous question, the time seems to be different everytime according to the requirement.

Empty Message Handling with Receiver File adapter

Hi,
We were using the "Empty-Message-Handling" (status set to Ignore) of Receiver file adapter to stop a 0 KB file from being written to the specified directory.
However, inspite of this, a 0KB file continues to be written.
The specifications are given below-
File Construction Mode - Add Time Stamp
Put File - Directly
Empty Message Handling - Ignore
Maximum Concurrency - 1
File Type - Binary
Can anyone please help with this.
Thanks and Regards,
Shiladitya

HI,
In one of thread the same problem was coming. Just look at the thread.
Receiver file adapter creates empty files, Empty-Message Handling SP19
Or
Follow the weblog for the same requirement.
/people/gowtham.kuchipudi2/blog/2006/01/13/stop-creation-of-an-empty-file-from-file-adapter-using-module
Thnx
Chirag
Reward points if it helps.

Message traceability in PI - File Adapter

Hi Experts,
I have a Idoc to FTP scenario. Idocs are sent from SAP R/3 to PI where they are converted to file format and saved. Another communication channel reads these files one by one and sends them to an FTP folder.
Now my question is, how will I trace/find the message which was generated by the second channel if I have Idoc number?
Thanks,
Netrey

You can use variable substitution and you can name the file on the basis of Idoc number through dynamic configuration
By this way the file name will be that of the IDoc number through which it is generated
http://help.sap.com/saphelp_nwpi711/helpdata/en/44/6830e67f2a6d12e10000000a1553f6/content.htm
PI File Adapter variable substitution
regards
Ninad

Row By Row File Processing using File Adapter

Hi,
Can any one explain that how can a read a file row by row using File adapter in BPEL?
Like ...When One row is executed completely only then second row starts........
Regards,
En
Edited by: Enceladus on Apr 16, 2013 11:55 AM

For This ...you need to make you service Synchronus by adding a reply in interface WSDL of BPEL process.
Regards,
En

Return Code after Command Line (File Adapter)

Hello all,
i execute in the File Receiver Channel a Shell Script.
Now i need a solution, when an error happens. The script returns an error code and i want that the Adapter Monitor is showing this information/error.
How can i enable this?
Or is there an other possibility to monitor this??
many thanks for your help
ilka

Hi IIka,
I have not tried this but I think
The return code of the script cannot be shown in monitor, because the call ends (does not expect a response) once the file adapter is called.
May be you can capture the errors in a seperate file and
use that as a log.
I am not sure if there is anyother way
also check this blog /people/michal.krawczyk2/blog/2005/08/17/xi-operation-system-command--error-catching
Regards
Vishnu

Decryption of Message after processing by File adapter

Similar Messages

Maybe you are looking for