Default Analytics Look In Setting

We have a few users that have the Default Analytics Look In Setting to a book of business in the users profile.
When they run the report we have created, they are still only seeing data where the are the owner. We try to change the Default Look In to the book of business, so the user can see all data in the report where the opportunity has the book associated with it, but they still only see their data, we cannot change the look in to the book.
How can we have it so that when they run reports, the can see just their data or change the Look In to see the book data

Glad you got that one figured out. Just want to add for everyone's benefit that there is a document about Analytics Visibility on the Metalink3 site.
https://metalink3.oracle.com/od/faces/secure/km/DocumentDisplay.jspx?id=434851.1&h=Y
Regards,
Mike L

Similar Messages

Default Analytics Look In Setting is not taking effect

Hi, all
This is possibly simple most of you.
My Default Analytics Look In Setting is set to a book on the user, but it sets on my user account when I try to run a report, and the books are not available in the look-in selecter .
I really appreciate any input on this.
Thanks

I assume that you must be working with an Oracle Partner for a project of such size. They might have a demo & a dev system from Oracle which is likely to have Books. So they can potentially help you for a small prototype.
Set up a high level Book to which you associate the users. The transactional search will work one book at a time. Try and create books based on how users segments / work with contacts. This need not only be markets -> locations. It should be they way users will want to segment the contacts to work with at a given point of time. May be you could also have a Medical book ; Literature Book; a Engg book with Civil, Mechanical, Electrical sub-books. This segmentation information will be required on the contact records to have a workflow associate the contact to the right set of books.
This way all contacts will be shared but access will be only one book at a time.
You will have to consider the nos. of workflows and their maintenance & also any implications of integrations to other IT systems. Any plans for organizational M&A will also have to be factored.
All the best.
Prakash

Print outs have thin border when -default-background-color is set

Hey everyone. In my application the print out have this very thin border. The -default-background-color is set to #333333 (dark grey) and this is the problem. When I set the color to #FFFFFF (white), the thin borders go away.
When I set the default-backgroun-color to #FFFFFF, my loading screen is white. I don't want that.
Does anyone know how I can have my loading screen with a #333333, but not have the thin border lines around my print outs? Setting the border properties on the printed component doesn't work. The problem is with the background color.
Thanks for reading.
Tom

Still hacking away at this problem.
I thought I had the fix until I deployed the AIR application. Setting the -default-background-color to white worked fine when running from flex builder, but when I installed the application. The "borders" are still showing.
Has anyone had any experience with this? I'm printing Point of Sale receipts and they look like crap with these lines around them. On top of this, some printers print differently. The HPs print a border around the whole component. The Brother printers just print the left and right. One of my customer's printers just prints the bottom and right borders.

Delivery Need By Default dates - How to set this at Site or Org level

Within iProcurement Requisitions - Looking to set the default for the Need By Date to current date + 14 days. The system is defaulting a +2 days and don't know where to change it.

Change POR: Days Needed By profile option from 2 to 14.
Sandeep Gandhi

Hi, i am looking to set cells so that when one number decreases the other increases. The catch is that when the first number goes up the other stays the same. And when it starts decreasing again the other builds up. so forth

Hi, i am looking to set cells so that when one number decreases the other increases. So say cell A is at 5, and cell B is at 0. When Cell A goes to 4, Cell B goe to 1. The catch is that when Cell A gets down to 1, and i change it to 5 again, Cell B will be on 4 and start incresing from that point on when cell A decreses. This is to show an amount of sales within a company when stock is sold.
Example:
A = 3
B = 0
A = 2
B = 1
A = 1
B = 2
A = 3
B = 2
A = 2
B = 3
A = 1
B = 4
A = 3
B = 4
A = 2
B = 5
Sorry if this sounds confusing.
Many Thanks,
Oliver

Can't be done, in a single cell, for the reasons given by Jerry.
But not difficult in a column:
I've moved the columns one to the right to put them in the body cells of the default Numbers table.
Current stock is listed in column B, with results of increases and decreases entered manually. Any increase is assumed to be a restocking, and does not affect the sales to date figure in column C. Any decrease in stock is regarded as a sale and increases the current total in column C by the amount of the decrease.
Until an entry is made in B, the corresponding cell in B will show a hyphen. This can be changed by changing the text between the quotation marks in the formula.
Enter the formula into C3 and Fill it down the rest of column C.
Regards,
Barry

My firefox 4 default theme looks nothing like the one in the video.

I just installed firefox 4. Sadly my default theme looks nothing like the one in the video..
Heres how it looks..
http://i51.tinypic.com/2w5ru4o.png

First you need to use the default theme "Default 4.0" in "Tools" > "Add-ons" > "Appearance".
After that, right click the top bar and unckeck "Menu Bar". This will disable the menu bar and show the orange Firefox button.
Make sure you have also "Tabs on top" checked.
I also see you use ChromiFox theme in Firefox 3. If you want to have a similar theme for Firefox 4, you can download the FXChrome theme.
https://addons.mozilla.org/en-US/firefox/addon/fxchrome/

Looking to Set Up Multiple Virtual Desktops

Hi, I'm a newb looking to set up multiple virtual desktops for my employees. What would be the best windows image to use and how do I install Chrome onto the machines?

Hi Shru84;
Welcome to Azure. Azure Virtual Machine as the name suggest are Virtual Server which function as your regular server but does not have a physical presence but is hosted on Azure Platform.
We have a variety of OS flavors, there is nothing which is good or bad, its more of a question of your requirement. Please note that the desktop Version of Windows 7/ 8
are at the moment only available for MSDN subscriber.
As for Chrome Installation its the same as installing it on a regular machine, that is opening up a web browser, loggin into chrome download site and installing it. ( http://www.google.com/chrome/ )
Here is an example:
his tutorial shows you how easy it is to create an Azure virtual machine (VM). This tutorial uses a Windows Server image, but that's only one of the many images available through Azure. This includes Windows operating systems, Linux-based operating systems,
and images with installed applications. The images you can choose from depend on the type of subscription you have. For example, desktop images may be available to MSDN subscribers.
You can also create Windows VMs using
your own images as templates. To learn more about Azure VMs, see
Overview of Azure Virtual Machines.
NOTE:
You need an Azure account to complete this tutorial:
You can
open an Azure account for free: You get credits you can use to try out paid Azure services, and even after they're used up you can keep the account and use free Azure services, such as Websites. Your credit card will never be charged, unless you explicitly
change your settings and ask to be charged.
You can
activate MSDN subscriber benefits: Your MSDN subscription gives you credits every month that you can use for paid Azure services.
How to create the virtual machine
This section shows you how to use the From Gallery option in the Management Portal to create the virtual machine. This option provides more configuration choices than the
Quick Create option. For example, if you want to join a virtual machine to a virtual network, you'll need to use the
From Gallery option.
NOTE:
You can also try the richer, customizable Azure Preview Portal to create a virtual machine, automate the deployment of multi-VM application templates, use enhanced VM monitoring and diagnostics features, and more. The
available VM configuration options in the two portals overlap substantially but aren't identical.
Sign in to the Azure Management Portal. Check out the
Free Trial offer if you don't have a subscription yet.
On the command bar at the bottom of the window, click New.
Under Compute, click Virtual Machine, and then click
From Gallery.
The first screen lets you Choose an Image for your virtual machine from one of the lists in the Image Gallery. (The available images may differ depending on the subscription you're using.) Click the arrow to continue.
The second screen lets you pick a computer name, size, and administrative user name and password. If you just want to try out Azure Virtual Machines, fill in the fields as shown in the image below. Otherwise, chose the tier and size required to run your
app or workload. Here are some details to help you fill this out:
New User Name refers to the administrative account that you use to manage the server. Create a unique password for this account and make sure to remember it.
You'll need the user name and password to log on to the virtual machine.
A virtual machine's size affects the cost of using it, as well as configuration options such as the number of data disks you can attach. For details, see
Virtual Machine and Cloud Service Sizes for Azure.
The third screen lets you configure resources for networking, storage, and availability. Here are some details to help you fill this out:
The Cloud Service DNS Name is the global DNS name that becomes part of the URI that's used to contact the virtual machine. You'll need to come up with your own cloud service name because it must be unique in Azure. Cloud services are important
for scenarios using
multiple virtual machines.
For Region/Affinity Group/Virtual Network, use a region that's appropriate to your location. You can also choose to specify a virtual network instead.
NOTE:
If you want a virtual machine to use a virtual network, you must specify the virtual network when you create the virtual machine. You can't join the virtual machine to a virtual network after you create the VM. For more information, see
Azure Virtual Network Overview. - For details about configuring endpoints, see
How to Set Up Endpoints to a Virtual Machine.
The fourth configuration screen lets you configure the VM Agent and some of the available extensions. Click the check mark to create the virtual machine.
NOTE:
The VM agent provides the environment for you to install extensions that can help you interact with or manage the virtual machine. For details, see
Using Extensions.
After the virtual machine is created, the Management Portal lists the new virtual machine under
Virtual Machines. The corresponding cloud service and storage account also are created and are listed in those sections. Both the virtual machine and cloud service are started automatically and the Management Portal shows their status as
Running.
Click Virtual Machines, and then select the appropriate virtual machine.
On the command bar, click Connect.
Click Open to use the Remote Desktop Protocol file that's automatically created for the virtual machine.
Click Connect to continue.
Type the credentials for the administrative account on the virtual machine, and then click
OK.
TIP:
In most cases, you'll use the user name and password that was specified when the virtual machine was created. Check the user name to make sure it has the correct domain information:
If the VM belongs to a domain at your organization, make sure the user name includes the name of that domain.
If the VM doesn't belong to a domain, either remove any domain information by starting the line with '\' or use the VM name as the domain name. For example,
\MyUserName or MyTestVM\MyUserName.
If the VM is a domain controller, type the user name and password of a domain administrator account for that domain.
Click Yes to verify the identity of the virtual machine.
You can now work with the virtual machine remotely.
Regards;
Prasant

Default and secondary row sets not working as expected

I am trying the following code to understand how the default and secondary row sets work in ADF. However, the implementation doesn't seem straightforward.
public void testRowSets(){
CountryVOImpl vo = (CountryVOImpl)findViewObject("Countries");
vo.setApplyViewCriteriaName("CountryVOSearchByRegionIdVC");
vo.setbindRegionId(new Integer(4));
vo.executeQuery();
RowSetIterator iter1 = vo.getRowSetIterator();
while (iter1.hasNext()){
System.out.println("default iterator, for region id 4, has countries="+iter1.next().getAttribute("CountryName")); //prints Zimbabwe,Nigeria,Israel
RowSet rowSet = vo.createRowSet("secondaryRowSet");
vo.setbindRegionId(new Integer(4));
vo.setQueryMode(ViewObject.QUERY_MODE_SCAN_VIEW_ROWS);
rowSet.executeQuery();
while (rowSet.hasNext()){
System.out.println("secondary row set, for region id 4, has countries="+rowSet.next().getAttribute("CountryName")); //prints nothing
rowSet.closeRowSet();
RowSetIterator iter = vo.getRowSetIterator();
System.out.println("default row set iterator row count="+iter.getEstimatedRangePageCount());
iter.reset();
while (iter.hasNext()){
System.out.println("default row set iterator, for region id 4, has countries="+iter.next().getAttribute("CountryName"));
Now, iter1 prints X, Y, and Z country names (line #9).The secondary row set prints no countries (line #17). After executeQuery() on the secondary row set, the default row set iterator also prints nothing (line #25). Believe the secondary row set has a different query collection only as long as the row filter is different, and in the case above it's the same. But if that's the case then when we perform rowSet.executeQuery in QUERY_MODE_SCAN_VIEW_ROWS, why does it not see the records in the default row set which have already been placed in the cache by iteration over the default row set?
NOTE: Changed the subject in the hope to get more suggestions/answers

have you tried resetting the rowset after the first iteration - my guess its pointing to the end after the first iteration. So perhaps try closing the rowsetitertor first
iter1 .closeRowSetIterator();
and then
RowSetIterator iter=vo.createRowSetIterator('secondaryRowSetIterator')

Looking to set up a public voicemail box

Hi guys, I'm looking to set up a public voicemail box that users can call into to check messages. I want to have a few users with admin privledges that can add/delete messages, and everyone else with read-only access. Is this possible?

still looking for some help with this, another question I had was how to disable a voice mail user, to stop any type of voice mails from coming to them.

Looking to set up wireless at home

Hi,
I am currently looking to set up wireless at home, and considering my lack of computer knowledge and the fact that our house is comprised of both Macs and PCs I am having great difficulty finding a feasible option!
It seems to me that Airport Extreme may work. We have a PC desktop (a Dell Dimension 3000), a PC laptop and an iBook G4. I understand that I would need the base station and the extreme card for the iBook. But I am quite unsure how both the PCs would use the wireless. What cards would they use or don't they need them at all?
This is probably an extremely basic question but I have been struggling to find a solution considering the iBook does not have a PCMCIA slot (which would have been ideal).
Many Thanks.
iBook G4 Mac OS X (10.3.9)

If the Desktop PC is in the same location as the Airport Extreme base station (AEBS) then it could be connected to it via the LAN port of the AEBS and would not need a wireless card. If it is to be in a different location then I would recommend an internal PCI wifi certified 802.11g card or an ethernet wireless bridge such as the Linksys WET54G.
If it is a recent PC laptop then it probably already comes with wireless capability, otherwise you will need a wifi certified 802.11g PCMCIA (PCCard).
The iBook will need the Airport Extreme card.
What sort of internet connection do you have as this may allow you to choose a different wireless router instead of an AEBS.

HT6154 looking to set up and email account but its from my own website..

looking to set up and email account but its from my own website..

then look harder. Nobody here would know what settings you should enter... contact your hosting provider for info...

MIGO Process order-Delivery completed indicator by default as "2. Set"

Hi all,
Can We have the MIGO Process order-Delivery completed indicator by default as "2. Set" instead of Set automatically by any configuration.
Pls suggest.
BR,
Subbu.

Hello Subbu,
Go to SPRO --> MM --> Inv Mgmt & Physical Inv --> Goods Receipt --> Set "Delivery Completed" Indicator
Deselect the "Delivery Completed" indicator for your Plant. Then go back & do the MIGO and check.
Hope it will help.
Regards,
Anup

Default export location not set to pbk file location

(Pixel Bender 2.1.432154 On Windows 7 64-bit)
After opening an existing .pbk file and going to 'File>Export Filter for Flash Player...', the default location is [Username]\Documents\Adobe\Pixel Bender in stead of the location of the file you are trying to export. Only when you do 'File>Save Filter As', the default export location is set the same as the location of the file.
Is this intentional?
I would prefer the 'Export Filter for Flash Player' to always use the location of the file you are trying to export, not just after you did 'Save Filter As'. It would save me some time .
- RC-1290'Dreadnought'
P.S. since Pixel Bender 2.0, the GPU mode not functioning, using ATI HD3870 or ATI HD3200. fine with my HD3870 and my HD3200

Ah, I see, when you open PixelBender first then go to to 'Open Filter' and navigate to where your filter is saved, everything works fine.
I usually double click the pbk files through Windows Explorer, or open them from the Project Explorer in FlashDevelop (which opens the file as if it was opened through Windows Explorer). So it seems like this happens when you haven't 'visited' the pbk file through the explorer in Pixel Bender (like 'Open Filter' and 'Save Filter As').
I have the files saved in a project folder ('Z:\Users\[Username]\Documents\Flash\Procedural\Terrain generator\bin\Shaders', Windows 7 is installed on 'Z:\')
So you should be able to replicate the problem by navigating to a pixel bender kernel file that is saved in a non-default location, with Explorer or equivalent. Then choose 'Export Filter for Flash Player'. Which will then show you 'Z:\Users\[Username]\Documents\Adobe\Pixel Bender' in stead of the location where the pbk file was saved. And even though 'Save FIlter As' makes Pixel Bender Remember the last used location, 'Export Filter for Flash Player' does not. Or at least, not for me.
I hope this helps .
- RC-1290'Dreadnought'

Had problem with my hotmail account and had to change my password. Ever since then, my default e-mail account set up to hotmail doesn't work...it sends from gmail. How can I correct that?

Had problem with my hotmail account and had to change my password. Ever since then, my default e-mail account set up to hotmail doesn't work...it sends from gmail. How can I correct that?

On your iPhone you need to change your password in 2 places:
- Incoming Mail Server and
- Outgoing Mail Server
To get to the password entry for the Outgoing Mail Server you have to tap on cell smtp.live.com and again on the second view.

How to set all new vm with VLAN ID as a default settings and alose set the avaiablity high .

How to set all new vm with VLAN ID as a default settings and alose set the avaiablity high .

Hi Ramy,
As a work around , you can create a VM without installing OS and configure the Vlan of VNic , then export it .
The new VM will be with Vlan ID when you import the "export file".(note : you need to select "copy the virtual machine " in the tab "choose import type" during importing ) .
Hope this helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Default Analytics Look In Setting

Similar Messages

Maybe you are looking for