Default Dashboard not working after user login

Hi All,
We have one issue in 11.1.1.7.1 where PORTALPATH is not working for users. As a result, user lands on home page/recent page instead of the default dashboard after login.
I followed Doc ID 1576576.1 and Bug 17071629 - PORTALPATH SESSION VARIABLE IS INEFFECTIVE is reported. I applied patch 17071629 on top of 7.1. I have tried and verified that
·     The URL we are using to login is “http://machinename:9704/analytics/saw.dll?bieehome&startPage=1”
·         There is no Start Page set  in user’s My Account other than Default.
·         In Answers, the PORTALPATH session variable fetches correct dashboard path.
·         I removed space in the dashboard name and tried with following path “/shared/Dashboard/_portal/PortalPathTest”. Also, assigned same default value to the session variable. I also tried “/Shared Folders/Dashboard/Dashboards/PortalPathTest” and “%2fshared%2fDashboard%2f_portal%2fPortalPathTest” but nothing works.
·         lsinventory shows the patch got applied successfully.
One thing to notice -
1.       Login url is: "http://machinename:9704/analytics/saw.dll?bieehome&startPage=1"
2.       After login, browser URL gets changed to "http://http://scoreboard-sit.wellsfargo.com:9704/analytics/saw.dll?bieehomemachinename:9704/analytics/saw.dll?bieehome" and shows Home Page instead of default dashboard.
3.       Now at this stage, if I append "&startPage=1" to the above step 2 URL in browser, it automatically navigates to correct default dashboard.
Also, This patch has fixed default dashboard in Act As. That means, If I act as a User, I land on correct default dashboard. But if same user actually logs in, s/he lands on home page.
I suspect if URL redirection after login is the actual issue. Please suggest if anyone has an idea.
Thanks,
Akshat

I think this was the issue -
There was a java script error related to an undefined object, "accessMode" in logon.js.  This is related to Accessibility or Section 508 (checked by Developer Tools of IE).  We may have removed this code from the logon page which was causing the error. We had customized the page quite a bit previously. When I ignore the error and step through, I go to the correct portal path page. So we are going to replace the logon.js file with backup and hopefully it will fix the issue.
Cheers!
Akshat

Similar Messages

  • Zsh completion can not work after re-login

    I follow http://www.linux-mag.com/id/1106/
    my .zshrc
    autoload -U compinit
    compinit
    zstyle ':completion:*' verbose yes
    zstyle ':completion:*:descriptions' format '%B%d%b'
    zstyle ':completion:*:messages' format '%d'
    zstyle ':completion:*:warnings' format 'No matches for: %d'
    zstyle ':completion:*' group-name
    if [ -d ~/zshfunc ] ; then
    r() {
    local f
    f=(~/zshfunc/*(.))
    unfunction $f:t 2> /dev/null
    autoload -U $f:t
    fpath=(~/zshfunc $fpath)
    autoload -U ~/zshfunc/*(:t)
    fi
    There is a ~/zshfunc/_fossil script, but it can not work after re-login.
    The temp workaround is re-type 'compinit' manually.
    fossil <tab> # will use file name as completion
    compinit
    fossil <tab> # will show commands for fossil
    Last edited by dlin (2014-11-10 00:47:14)

    Hi
    Thanks for the tip. However, I elected not to save the XP SP2 uninstall files when I installed SP2. so I appear to be stuffed.
    There must be some creative drivers that work with an audigy with XP SP2 installed!
    If not then its either re-format the Hard Dri've and re-install everything again (Doh!!) or get another (not Creative Labs) soundcard.
    this is really bugging me.
    Zonker

  • Deletion indicator not working after user exit error

    Hi Gurus,
    I had one requirement in Purchase Requisition. If the number of items increase by 36 , there should be an error saying that maximum items reached but once that item is deleted that error should disappear.
    I have written the coding in an Exit: EXIT_SAPLMEREQ_010.
    And the coding is :
    IF gs_eban-bsart = gcz902.
    LOOP AT gt_eban INTO gs_eban
    where loekz is initial.
    LOOP AT gt_ebkn INTO gwa_ebkn WHERE banfn = gs_eban-banfn
    and bnfpo IN r_bnfpo.
    recherche division- ordre interne
    LOOP AT ot_div into gwa_div WHERE ot = gwa_ebkn-aufnr AND div = gwa_ebkn-bnfpo.
    ENDLOOP.
    IF sy-subrc NE 0.
    gwa_div-ot = gwa_ebkn-aufnr.
    gwa_div-div = gwa_ebkn-bnfpo.
    APPEND gwa_div TO ot_div.
    ENDIF.
    ENDLOOP.
    ENDLOOP.
    DESCRIBE TABLE ot_div LINES n.
    IF n >= 37.
    case sy-ucomm.
    WHEN 'MESAVE'.
    MESSAGE e111(zpfr) with n.
    exit.
    ENDCASE.
    ENDIF.
    ENDIF.
    So now the exit is working fine......but when i go to delete that extra item it is not getting deleted , so while saving the information message comes that no data changed.
    So ho wto delete that extra item.
    Do anyone have reply....
    thanks in advance.

    Hello.
    If you insert 37 lines you get your error message. But if you delete 1 row, you get error message again, right?
    I think that's because you are not refreshing internal table ot_div. Shouldn't you refresh it before LOOP AT gt_eban INTO gs_eban?
    Regards.
    Valter Oliveira.

  • My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

    My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

    Hmmmm... would appear that you need to be actually logged in to enable the additional menu features.
    Have you tried deletting the plists for MAS?
    This page might help you out...
    http://www.macobserver.com/tmo/answers/how_to_identify_and_fix_problems_with_the _mac_app_store
    Failing that, I will have to throw this back to the forum to see if anyone else can advise further.
    Let me know how you get on?
    Thanks.

  • Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

    Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

    @ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
    @ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!) 
    @ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack.  i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot. 
    Thanks fo rall yor help!

  • Microsoft Excel 2013 add-in not working after update

    I have originally posted this question at answers.microsoft.com and have been re-directed to post here. (http://answers.microsoft.com/en-us/office/forum/office_2013_release-excel/microsoft-excel-2013-add-in-not-working-after/298aff03-c90a-4a2a-b67b-07b6f3c7648c)
    We are an organization with over 200 users and are currently using Microsoft Office 2013 (Click-to-run install via Office 365 portal), we have noticed that in Excel when we apply the monthly Office update, the add-in (e.g. Analysis Toolpak) would stop working
    with the following error message displayed.
    I tried updating from 15.0.4631.1004 to 15.0.4641.1003,
    15.0.4641.1003 to 15.0.4649.1004, they all gave the same results.
    I have checked the captioned file path and it is indeed missing, I think the update mechanism messed up the add-in somehow, a full re-install would fix it as quick or online repair is not doing the trick.  This is not the only add-in it is affecting
    as there are some 3rd party add-ins are affected as well.
    Please advise how we can fix this without needing to re-install Microsoft Office.  Thank you!

    I don't have 365 or C2R so I can't address your main question, so just a few thoughts which may not be applicable in your setup.
    Check the addin manager to see if your addins are listed and ticked. If listed (ticked or not) check the registry to see where the location is written, if ticked look here
    HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Excel\Options
    and look for keys named OPENx, where x is the order number the addin is loaded
    if not "ticked" instead of \Options look in \Add-in-Manager
    With a VBA macro or in the VBE's immediate window return
    Application.LibraryPath 
    Assuming you found a listing in the registry do the paths match, if not look in the .LibraryPath to see if the addins got unloaded there into the subfolder \Analysis
    If you find the file(s) try un-installing and reinstalling the addins, but browse to the actual folder don't simply tick. If you can't find the files, copy them (from a different system) to the folder indicated by .LibraryPath. In the addin manager uninstall
    them if installed, close the manager, open it again and the addins should be listed, tick to re-install.
    You say your other addins don't work, I wonder if some mixup has occurred with what Excel thinks is the default path, but note for other addins the default addins path is returned by app.UserLibraryPath
    Are you using a Chinese system?

  • IPhone 4's WIFI has been not working after upgraded to 6.1.3(10B329)

         My IPhone 4 was working fine with its WIFI when it is running in default IOS version, I believe it was 5.x.x version, however after I upgraded to 6.1.3(10B329) then WIFI got very aweired issues again and again.starting from then I never get my WIFI working again:
    1. Sometimes I can connect to my home's network and keep alive for 1-2 minutes then WIFI will not work on IPone, my home's router is not working either, I need to restart my home's router manually;
    2. I can connect to my office's network and keep alive 5-10 minutes then WIFI is not working, however my office router is not affected; however the following days then I can't connect WIFI to office's network any more.
    3. I tried to connect to other public area's free network via WIFI, however never joined in.
         I called Apple's service centre couple of times they have no clues, they said they never met this problem before for WIFI not working after upgraded to IOS 6.1.3 and no suggestions from them at all, every time I called them they gave me the same suggestion, such as restore-re-install, check your own router etc, nothing help, however my friend bought a brand new IPhone 4 with default IOS version 6.1.3 which is working perfectly without any issues on its WIFI then I believe this is a completely software issue.
         I know this is a general issue for Apple users and I refuse to upgrade to higher version as I am not sure the higher version can fix this issue however I am pretty sure the newer version of IOS did bring a lot of new bugs, anyone can provide me any suggestions guys ? THANKS A LOTTTTTTTT!!!!!!!!!!!!!!!!
    Terrence

    I have fixed this issue after upgraded my router's firmware finally, this is a completely compatibility issue between Apple and other third party manufactures, hopefully we can get compabitlity list for each future IOS version ahead of time which can potentially avoid such kind of embarrassing situations moving forward, thanks !

  • ISight not working after screen repair

    My iSight is not working after a screen repair (which was damaged during Apple fixing the topboard!). Could it be possible that the camera is damaged in some way during a screen being replaced? I am a bit annoyed that they did not check the machine after all of teh repairs were made as I have a number of adverse issues with it now.
    Has anyone else experience this after a screen replacement? I get the message that there is no camera attached, or that it is in use. I have followed threads regarding checking login items etc, to no avail.
    The iSight is important to me as I am a long way from home. It is annoying that something seems to go wrong with the MacBook, when I most need it.

    When an iSight isn't working, there are a variety of simple things you can try (see further below), but one thing few people think of, is to connect a Firewire or USB drive that contains a bootable system, which has previously been tested on a known-good Mac to make sure the iSight works when booted from that drive, and see if the problem still occurs with the Mac that's under test. That's a quick way of testing whether the problem is hardware or software.
    Other things to try:
    - Reset PRAM, NVRAM, and Open Firmware.
    - Reset your Mac's SMU--see documentation for your Mac for specifics.
    - Repair permissions.
    - Make a new user account, and see if it happens there.
    - Check Login Items in the Accounts prefpane for anything that might be causing the trouble, like printer or scanner items.
    - Try what's suggested at www.eriymati.com.ar/isight/
    - Reset the printing system in Printer Setup Utility, since some printer/scanner drivers can stop the iSight from working--if that helps, see if your printer/scanner can work with OS X's built-in drivers; if it can't, download the latest driver for your printer/scanner from its manufacturer's web site, and see if that allows the printer/scanner to work, without interfering with the iSight, but some manufacturers, including HP, Epson, etc. are still dragging their feet about making such drivers. If the printer/scanner driver still causes trouble, uninstall it, then replace the printer/scanner with one whose manufacturer has enough brains to write a driver that doesn't interfere with the iSight (some specifically state now, in their System Requirements, that they don't work with Macs that contain built-in iSights, so check this before you buy another printer/scanner).
    Sometimes a non-working iSight is caused by something wrong at a "deep" System level (meaning, it might be caused by a single bad or missing file, but it might take days to find it)--if you find that to be the case, the quickest fix if you find the steps above (and others described here and elsewhere), is to reinstall OS X, either by doing an Archive and Install, or by making a bootable backup of the drive, erasing it, then using Migration Assistant to copy the data from the backup.

  • Security and privacy system preferences not working after Lion install.  What to do?

    Security and privacy system preference not working after Lion install.  Not sure if it happen with Lion installer or after updating. What to do?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
    Step 1
    Copy or drag — do not type — the line below into the Terminal window, then press return:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
    Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
    Step 2
    Repeat with this line:
    sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
    This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
    Step 3
    launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
    Step 4
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
    Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
    Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
    You can then quit Terminal.

  • C7 browser not working after update to anna

    c7 browser not working after update to anna.. Plz help

    Hi bluz,
    Welcome to the Nokia forum.
    If the default browser doesn't work after updating to Anna, hard reset the device and then reinstall Anna with Nokia Suite. 
    Take a back up with Nokia Suite by going to Tools > Back up. When making the backup, don't tick the Settings box as this will back up the bug. Now hard reset the phone with *#7370# and default security code 12345 unless you've changed this code yourself. Once the phone has rebooted you will have an empty phone.
    Now click on the green icon in Nokia Suite and reinstall the current software. Once you've done this, click on Tools > Restore to place the back up back onto your phone.
    After doing the above you will be able to use the default browser again.
    Let me know how you get on so that I can troubleshoot, if necessary.
    Iris9290
    If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too.

  • Fingerprint Reader not working after windows password reset

    Hi There
    I was using windows login (single admin user) and fingerprint reader to login to my Thinkpad T510. Yesterday night I changed windows password and I didn't update finger print. Unfortunately I am not able to login when I tried to login using windows login today, I forgot the password and when I tried finger print reader it is just throwing error.
    Why finger print is not working after windows password reset? What should I do to login?
    Help would be appreciated!!

    I just called the tech support just now? I just asked the 'why the finger print reader not recognizing the finger print after changing windows password?', and he gave the following answers
    1. You should change fingerprint while changing windows password.  I don't understand the reason behind it, btw is this true?
    2. We can't do anything for this issue.

  • Iphone 5 back camara not working after ios update

    My Iphone 5 back camara is not working after ios 8.1 update this morning
    Only getting some fuzzy image.
    Camara was working before the update.
    Resting the phone to factory setting restoring phone nothing seems to work
    I think this will be my last Iphone as apple never respondse in any case

    If you're expecting Apple to respond on this forum, you will have a long wait. This is a user-to-user technical support forum that is only hosted by Apple. This was made clear when you signed up. In any case, try the steps in this article to troubleshoot hardware issues (there is a camera section):
    iPhone: Hardware troubleshooting

  • Caller id not working after syncing my iphone to my pc?

    caller id not working after syncing my iphone to my pc?

    Syncing with iTunes has nothing to do with this, especially when not syncing contacts with a supported address book app on your computer which very few Windows users seem to be inclined to do.
    Caller ID is not working in which way?

  • Card slot does not work after update (14/10/2011)

    Card slot does not work after yesterday update (14/10/2011)! It works with my SD card month ago, but now it dosn't!!!
    MacBook Pro 13 OS ver. 10.6.8

    Thanks for your suggestion. I downloaded OnyX and ran the cleaning function. After restarting, I opened Help and once again the first screen appeared fine. But again most of the links did not work, though those under the "What's New" heading did work. I might add that I had previously tried a variety of suggestions posted in another thread, which included deleting from the caches folder in Home>Library several files such as com.apple.helpui and help.plist in the Preferences folder. (As noted in my previous post this evening, I also created another user but that also did not have any effect.) Any other ideas? Thanks

  • Flash player does not work after I installed it

    Flash player does not work after I installed it

    I'm using Mac Osx and my browser is Safari
    Date: Wed, 5 Feb 2014 00:41:29 -0800
    From: [email protected]
    To: [email protected]
    Subject: Flash player does not work after I installed
        Re: Flash player does not work after I installed it
        created by Mike M in Installing Flash Player - View the full discussion
    This is a user-to-user forum, NOT 24/7 support. You're "lucky" I happen to be up at 1:40 am to answer you.
    What OS are you using?
    http://mmonlinedesigns.com/images/os.png
    What browser?
    http://mmonlinedesigns.com/images/browsers.png
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6087541#6087541
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6087541#6087541
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6087541#6087541. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Installing Flash Player at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Maybe you are looking for