Default material quantity 1 in sales order

hi experts
client demand when we enter material in sales order system should pick quantity 1 (one) by default
is it possible ?
thanks in advance

Hi
This is possible thro development only
By making the item category settings that is order qty is always = 1 i dont know whether the default value that is 1 will come in the sales order
But it will restrict the order qty to ONE only
If you make it to 2 system will show error and i hope this is not your requirement
If your requirement is, by default the order qty should be 1 and that should be editable
For this ABAP development is reqd
If your requirement is the order qty, by default should be 1and that is limited to 1 maximum (not changable to 2 ) the item cat settings is sufficient
But in this case also the 1 has to be manually input there
Regards
Raja

Similar Messages

Project material quantity and sales order material qnty to be same

I have a requirement that my S.O material and quantity should be checked with project material number and quantity.If there is any mismatch system should not allow me to proceed to do the sales order or any error message or check to be defined.
Please suggest.
Zinni

Hi Makwana Zinni ,
If you have found solution yourself, share it with forum members. It'll be definitely useful for one or the other guy.
Thanks & Regards,
Amaresh Makal

Run Time Error while Entering Quantity in Sales Order

Dear All,
Iam getting Run time Error while iam entering material quantity in sales order.Please find the screenshot of the same.
kindly Help Me.Me. Plz note that we had done a system copy two days back to our new server.
Rgds
Thomson
ST22 Screenshot

Dear All
Its Resolved Thanks For your Valuable time Support
INCLUDE LV03VFB4 inside below code trigger error.
PERFORM VVBBD_AUFBAUEN USING WA_AVBBD
                                    WA_AVBBD-APOMOBILE
                                    DA_SUBRC
                                    DA_UPDKZ
                                    DA_VVBBD_TABIX
                                    0.
This Was the Error some how 0 was there we are removed the 0 now it is working fine
Rgds
Thomson

Function to find quantity of a material in Open sales Order in 4.5

hi ,
is there any function to find the total quantity of a material in open sales order for an input date in 4.5
Regards

I think you may find function RV_BILLING_PRINT_VIEW helpful. This is the function used by the standard SAP report RVADIN01 to assemble all the information needed to print a Sales Order. The structure and table output by this function contain all the information in the header and line items of the Sales Order.
To watch this function in action, set a break point on this function (line 1075 of RVADIN01 in my system) and print a Sales Order (SO).
I use VF31 to print an arbitrary SO during testing.
Your company may have altered the standard print configuration for sales orders in SAP. If so, you will need to note the output type of your test Sales Order in VF31 and use Transaction V/83 to determine which program is being used to print that type of SO.

Steps to dispatch a Material against a Sale Order

Dear Sir,
We have created a Sale-Order . The Material to be dispatched is available in the Stock .
Pl guide us as what steps are rqeuired to be followed to finally dispatch & Invoice this Material against the Sale Order .
Also pl guide , the steps involved incase the Material is Exciseable and Excise Duty is also to be paid .
We assure to give full points for the suggested solution pl .
Regards
B Mittal

Dear Mittal
Please follow the steps
- Go to VA02, input the sale order and execute. There go to schedule line tab and see whether the stock is flowing under the tab Confirmed quantity. If not do availability check and save.
- Go to VL01N, give shipping point, sale order reference and execute. There click on Picking tab and input the quantity to be delivered in Picked Qty column. Press Post Goods Issue on top. Make a note of the delivery reference.
- Go to VF01 by default, the delivery reference will flow in your screen. Press F8 and check whether the conditions are flowing correctly and if so, save the billing document and make a note of the billing reference.
- Go to J1IIN, click on From Billing here again by default the billing reference will flow; if not give the above billing reference and execute. Save the document.
The above steps are applicable whether the material is excisable or not. The control is in J1ID. If the material is excisable, you have to select Material and Chapter ID combination in J1ID and for that material, maintain 1 under the tab Declared. If excise duty is not applicable, dont maintain any value there.
thanks
G. Lakshmipathi

In which table,i could find order quantity for sales order..??

In which table, i could find order quantity for sales order..??
and also in which table i could find delivery for sales order..
need help..??
Moderator message: please search.
Edited by: Thomas Zloch on Feb 23, 2012

Check the table AUFM.
Give the order number in AUFNR.
For movement type 261 (GI) & 101 (GR), you can get the material document number (MBLNR), Material (MATNR), Qty (MENGE) & UoM (MEINS).

Standard report show the confirmed quantity in sales order

Hello
i'd like to know t-code for report show the confirmed quantity and the remaining quantity of sales order
For example : i create sales order with quantity (1000) and the quantity of material in storage location 600 , so i want report display the confirmed quantity ( 600) and the remaining quantity (400)
Thanks

Search the forum before posting. Check in VA05
G. Lakshmipathi

Default line item in Sales Order

Hi guys,
I need to have a material item code as default in phase of sales order creation.
Requirement is that when user is compilin sales order header data system automatically generates a line item.
I was thinking to manage it with product proposal standard functionality, what do you think about, do have anyu alternative solution, standard one is appreciated.
Thank a lot in advance for your support
Salvio

Salvio,
never used myself..
but can provide you some useful links, hopefully they should help you:
[Item Proposal Configuration for Order Creation;
[Sales-what is the difference between product proposal and cross selling;
[DYNAMIC PRODUCT PROPOSAL;
So if you search the forum, maybe you'll find many more.
Regards,
Raghu.

Confirm Quantity in Sales Order

at the time VA01 (create Sales order)
in Schedule lines tab systems shows Confirm quantity for final goods item with confirm quantity which should not be happen .
can anybody please how to customize for confirm quantity in sales order as we are working on make to order.

The confirmed quantity will be picked based on the schedule line category u have choosed. So change the schedule line category to No material planning ( CN ).
Schedule line category
A classification that distinguishes between different kinds of schedule line. The category determines how the system processes the schedule line.
Use
The schedule line category determines, for example, whether the system passes on requirements to materials requirements planning (MRP).

Capture u201CInstallation Chargesu201D of a material sold in Sales Order

Hi SD Gurus,
We have requirement to capture u201CInstallation Chargesu201D of a material sold in Sales Order. The charges are quantity based and shall be shown separately in sale order & invoice. This charge shall be treated as additional revenue (with separate revenue G/L Account) and shall be maintained as optional. If included as a condition type, we do not want the item totals of the materials to be affected by this condition.
In the existing pricing procedure, the material price field is made mandatory. We tried to enter it as a service line item and entered the u201CInstallation Chargesu201D with a new condition type with new revenue G/L Account. But it insists for a price for the material due the mentioned configuration.
Request your valuable suggestion in achieving this requirement.
Regards,
Vikrant

Hi,
You can achieve this functionality using the Bill of Material concept.
Create the material and its BOM. In the BOM, include the main material and the service. (Case A)
Also maintain an alternative BOM for the same material, the BOM being the material itself and nothing else. (CaseB)
Make the parent item relevant for pricing and child items not relevant for pricing
In sales order, give the main material, so the sales material and service will come.
In Case A, maintain a condition type with a reqmt routine saying that the condition will be valid only if the BOM contains the service item. Maintain the condition record. So, if the BOM contains the material and its service, this condition type will come else it will not come.
If you don't want to charge the service, replace the BOM of case A with the alternative BOM maintained for the material to go to case B.In case B, this extra condition type will not come. Hence only the price of the main material will come.
Hope this helps u

Minimum quantity in sales order

Hello friends,
Can anyone tell me how to maintain minimum quantity in sales order, (Not Minimum order quantity of material master) as only maximum (target) quantity is maintainable in sales order at Item level? So after this development in sales order, one can enter two quantities (minimum and maximum) so that sale can be done between this quantity range.
I know this is not possible without exits or developments, but please tell if someone has came across the same scenario which exits used by you.
Required Minimum Order quantity Field in Sales Order at item level like Cumulative Order Quantity in Sales Units (VBAP-KWMENG) at proper position in Transaction-> VA01-VA02-VA03.
Program name: SAPMV45A Screen number: 4900 or wherever it is adjusted at item level i.e. Additional Data B Tab.
Thanks in advance
Warm regards
Amit

Hi Prabhu Peram,
I want to maintain a input field can you throw some light on the same.
Regards
Amit

Can a material of a sales order have more than one billing doc

Hi,
Can a material of a sales order have more than one billing doc(vbrp-vbeln)
Regards,
Seema

Hi,
Yes it is possible.we can have multiple invoice for a sales order of one line item.
For this we should have order quantity not exceeds billing quantity at the item category level.
Also we have to use teh field Quantity +/- indicator at the copy control level.
Regards,
Krishna.

Restricting order quantity in Sales Order

Hi Folks
I have a requirement that my material can only be ordered in multiples of 5 KG, 15 KG and 25 KG. Could you suggest how can i control the ordered quantity in sales order ? is there a standard way in SAP to do it or does it require customization.
Thanks

Hi
The delivery units like in the multiples of 5 like 5 or 10 or 15 can be maintained in sales org data 1 tab of the material master delivery units field
Having set this So when creating the delivery if the multiples are not properly given the system will throw a warning message message no V4 and 081
You can set this message as errr message in t code OVAH
But there is a risk involved here
If the delivery units is maintained as mutiples of 5 that is 5 ,and 10 and 15 like that in MMR sales org data 1 tab andin OVAH it set as error message V4 and 081 then if the sales order is for 21 units then the delivery will be allowed only till 20 units
So carefully lookimg at many angles this should be used
Regards
Raja

Default valuation type in sale order

Hi,
We have some materials which are split valuated. We need to have default valuation type which will appear in the sale order when we create sale order for that material.
At present it looks that SAP does not have any provision to provide the valuation type defaults for sale order.
Does anybody know if we can set up default valuation types for sale order and how to do this?
Thank you for all your help.
Thanks,
-Shekhar

Hi Shekhar
Please check wheteher split valuation is applicable for FG
Coz split valution is used in cases
Split valuation is necessary if, for example:
Stock from in-house production has a different valuation price than externally procured stock.
Stock obtained from one manufacturer is valuated at a different price than stock obtained from another manufacturer.
Different batch stocks of a material have different valuation prices.
Check whether the Valuation Class ,Catogory is assigned to the Valuation area.
Also Refer the Follwoing thread:
Split valuation not possible for FG
And the help Doc
http://help.sap.com/printdocu/core/print46c/en/data/pdf/LOMDMM/LOMDMM.pdf
regards
Shailesh Meshram

How to Restrict Confirmed Quantity in Sales Order (Based on Batch Expiry)

Dear SD Experts,
Currently our sales order confirms any amount of quantity if stock is available. And only during delivery it checks for the expiration of the batch and reduces the delivery quantity to batches available in stock within expiry.
But since we are doing a bulk creation of deliveries at the end of the day, the check for expired batches is happening too late and no visibility for the data entry operators of stock that cannot be delivered during creation of the sales orders.
So I am looking for solution to restrict the confirmed quantity in sales order to actually confirm only stock what can be delivered. i.e. based on expiry of the batch.
Thanks!

hi
in Logistic general - batch mangement - batch determination allocation and check activation - maintain allocate SD search Procedure/ activate check
check this for your sales area and sales document type and then in the search procedure maitain the strategy to check the Expiration date.
regards,
Sudhir

Free goods determined in Delivery over Order Quantity in Sales Order Item

Hi Gurus,
I've a problem about using free goods determination.
First I created free goods master record with following information
ZG1010012060075 From 100 PC -> Free good ZG1040012060075 2 PC
Free goods Category = '2' (Exclusive)
Free goods delivery control = 'E' (Delivery proportional to quantity in main item)
Then I've created Sales Order with
Item 10 ZG1010012060075 4,000 PC.
Item 11 ZG1040012060075(Free good) has been automatically determined for 80 PC
Then I've splitted Item 10 into 4 deliveries. The result of free goods determine in each delivery are as follow:
Delivery#1)
Item10 ZG1010012060075 = 1,176 PC
Item20 ZG1040012060075 = 24 PC
Delivery#2)
Item10 ZG1010012060075 = 1,176 PC
Item20 ZG1040012060075 = 24 PC
Delivery#3)
Item10 ZG1010012060075 = 1,176 PC
Item20 ZG1040012060075 = 24 PC
Delivery#4)
Item10 ZG1010012060075 = 472 PC
item20 ZG1040012060075 = 9 PC
*Remark : Total quantity of 'ZG1040012060075'(free goods) = 92424+24 = 81 PC
(Greater than 80 PC)*
I think the system determined free goods in Delivery#4 correctly due to rounding up. But It might not be over the order quantity in Sales Order Item 11. Even though I've set the item category in delivery with Check overdelivery = 'B' (Situation rejected with an error message), the free goods are determined over order qty. BUT if I change delivery qty in delivery#4 Item20 from 9 PC -> 8 PC -> 9 PC, the error message occurred.
My point is to fix the system not determine free goods in delivery items over order quantity in sales order item.
Has anyone met this situation before? Do you have any idea about this issue?
Best Regards,
Prachya Lalitnorasate

Dear Sai,
Thank you for your advice, but it didn't solve my problem.
I would like the system to determine free goods with proportional to main item AND In the last delivery main item delivered completely free goods must be determined equal to remaining open delivery item.
Do you have any idea about configuration/customization?

Default material quantity 1 in sales order

Similar Messages

Maybe you are looking for