Free goods determined in Delivery over Order Quantity in Sales Order Item

Hi Gurus,
I've a problem about using free goods determination.
First I created free goods master record with following information
ZG1010012060075 From 100 PC -> Free good ZG1040012060075 2 PC
Free goods Category = '2' (Exclusive)
Free goods delivery control = 'E' (Delivery proportional to quantity in main item)
Then I've created Sales Order with
Item 10 ZG1010012060075 4,000 PC.
Item 11 ZG1040012060075(Free good) has been automatically determined for 80 PC
Then I've splitted Item 10 into 4 deliveries. The result of free goods determine in each delivery are as follow:
Delivery#1)
Item10 ZG1010012060075 = 1,176 PC
Item20 ZG1040012060075 = 24 PC
Delivery#2)
Item10 ZG1010012060075 = 1,176 PC
Item20 ZG1040012060075 = 24 PC
Delivery#3)
Item10 ZG1010012060075 = 1,176 PC
Item20 ZG1040012060075 = 24 PC
Delivery#4)
Item10 ZG1010012060075 = 472 PC
item20 ZG1040012060075 = 9 PC
*Remark : Total quantity of 'ZG1040012060075'(free goods) = 92424+24 = 81 PC
(Greater than 80 PC)*
I think the system determined free goods in Delivery#4 correctly due to rounding up. But It might not be over the order quantity in Sales Order Item 11. Even though I've set the item category in delivery with Check overdelivery = 'B' (Situation rejected with an error message), the free goods are determined over order qty. BUT if I change delivery qty in delivery#4 Item20 from 9 PC -> 8 PC -> 9 PC, the error message occurred.
My point is to fix the system not determine free goods in delivery items over order quantity in sales order item.
Has anyone met this situation before? Do you have any idea about this issue?
Best Regards,
Prachya Lalitnorasate

Dear Sai,
Thank you for your advice, but it didn't solve my problem.
I would like the system to determine free goods with proportional to main item AND In the last delivery main item delivered completely free goods must be determined equal to remaining open delivery item.
Do you have any idea about configuration/customization?

Similar Messages

  • In which table,i could find order quantity for sales order..??

    In which table, i could find order quantity for sales order..??
    and also in which table i could find delivery for sales order..
    need help..??
    Moderator message: please search.
    Edited by: Thomas Zloch on Feb 23, 2012

    Check the table AUFM.
    Give the order number in AUFNR.
    For movement type 261 (GI) & 101 (GR), you can get the material document number (MBLNR), Material (MATNR), Qty (MENGE) & UoM (MEINS).

  • Restricting order quantity in Sales Order

    Hi Folks
    I have a requirement that my material can only be ordered in multiples of 5 KG, 15 KG and 25 KG. Could you suggest how can i control the ordered quantity in sales order ?  is there a standard way in SAP to do it or does it require customization.
    Thanks

    Hi
    The delivery units like in the multiples of 5  like 5 or 10 or 15 can be maintained in sales org data 1 tab of the material master delivery units field
    Having set this So when creating the delivery if the multiples are not properly given the system will throw a warning message message no V4 and 081
    You can set this message as errr message in t code OVAH
    But there is a risk involved here
    If the delivery units is maintained as mutiples of 5  that is  5 ,and 10 and 15 like that in MMR sales org data 1 tab andin OVAH it set as error message V4 and 081 then if the sales order is for 21 units then the delivery will be allowed only till 20 units
    So carefully lookimg at many angles this should be used
    Regards
    Raja

  • How to get the back order quantity for sales Order

    Hi Friends,
    I want to get the back order quantity for sales order . in MD04 t-code,
    there is a field(MDEZ-MNG01) for Received Qty/ Required qty.  But MDEZ is a structure.
    I tried from MDTB table, but the table is not updated with the values in MD04.
    Please guide me from which table I can get the back order Qty for sales Order
    (ref: t-code  MD04, MRP element = CusOrd).
    Thanks,
    Sagar

    >
    VIdya Sagar wrote:
    > Hi,
    >
    > Isn't  there any difference b/n Open Sales Order and Back order??
    Yes Quite Difference.
    Read:
    http://www.sap-img.com/sap-sd/explain-the-meaning-of-an-open-sales-order.htm
    http://help.sap.com/saphelp_sbo2005asp1/helpdata/en/b6/bdb9b2f02842348c9edbe78af863c4/content.htm

  • Order quantity on Sales Order

    Hi All....
            When we create a sales order with reference to Quotation, then the quantity will be copied from quotation. Later on if user tries to change that quantity in sales order then it is giving a warning message......but what we need is a error message rather than a warning message....so that user will not be allowed to change quantites which are copied from quotation.
    Thanks in advance....

    Hi Rajesh and Vinay...
             Thanks for your replies.....
    I went in to that of message variables but how to proceed from there...every thing is greyed out....
    Regarding that user exit they want me to do this in configuration.....
    The message no which i am getting for warning is V1503
    Thanks in advance......
    Message was edited by:
            ravi chimmili

  • Free Goods Problem and User Exit if needed in Sales Order

    Hello All,
    The problem is related to Free Goods in Sales Order which is given with an example -
    We have maintained Free Goods ( T Code - VBN1) in inclusive scenario which is as follows -
    For 210 PAC (Pack) of Material A 18 PAC Free.
    Where 1 PAC = 20 BT (Bottle) and 20 PAC = 1 CV (Case Pack)
    In the material master of Material A the Base Unit Of Measurement (UOM) = PAC and Sales UOM = Blank so that we can use any conversion factor maintained for the material.
    The conversion factors maintained for Material A are as follows -
    1 BT = 1BT
    1 PAC = 20 BT
    1 CV = 20 PAC
    Now when we are raising sales order for 11 CV the free goods are not generated in the Sale Order.
    Again if we maintain the Sales UOM in CV and raise the sales order it is showing :
    10 CV as main item and 1 CV as Free which is wrong because in the conversion factor we have already maintained 1CV = 20 PAC , Whereas in the inclusive scenario it is given 11CV = 210 PAC and 210 PAC = 18 PAC is free.So in any case it is taking into account 2 more PACs.
    Please suggest what need to be done in this case in respect of User Exit or Source Code in ABAP if needed.
    Thanks & Regards
    Priyanka Mitra

    Hello Priyanka Mitra,
    We are facing a problem same as you.
    How did you solve this problem?
    We are very glad if you teach it concretely.
    Please advise your solution to us.
    Thanks.

  • How to determine the delivery plant in a CRM Sales Order

    Hi experts:
    In CRM how to work the delivery plant determination? and I can change the Plan in a Sales Order before its download to ECC?
    I download the DNL_PLANT object but i don't understand what is the functionality of these are created like business partner in CRM.
    Thanks in advanced by your orientation about these questions that have me a little bit confuse.
    Sussie

    Hi Reddy
    Thanks for your reply, but the note says that only applies for India or Brazil legal purposes.
    In my case I still have confuse, in a normal Sales scenario CRM to R/3 how to works the determination of the delivery plant.
    I know that in R/3 is determined by:
    1. Customer-Material info record (Sales Area data)
    2. Customer Master data (Sales area data)
    3. Material Master data (Sales-area data)
    I can think that in CRM is determinate bye Material Master Data, but I still don't know if I can change
    it??  and where in the crm sales order before it is download to R/3??
    Thanks
    Sussie

  • Free Good Qty as non modifiable field in the Sales Order Level

    Dear Friends,
    I have successfully done the config change for the Free Goods, But now i want make the free good line item qty as a non modifiable field in the Sales Order Level.
    How can i do this.. Please advice.
    Thank U,
    Uwanthi

    Hi
    This is a standard behaviour in the system
    kindly use the below program and user exitexit
    MV45AFZZ and use "Userexit_filed_modification"
    Regfards
    Damu

  • Delivery Date with Zero Order Quantity in Sales Order

    Dear All,
    I have created a sales order in va01 with different delivery date in schedule lines. I want to save delivery date with zero order
    quantity because he has not delivery on time.

    Dear All,
    I have created a sales order in va01 with different delivery date in schedule lines. I want to save delivery date with zero order
    quantity because he has not delivery on time.
    Deatils :
    Delivery Date     Order Quantity  Delivery Qty
    02.09.2011       10                    10
    05.09.2011       10                    10
    09.09.2011       10                    10
    15.09.2011       10                    10
    21.09.2011       10                    0
    Now i want to insert a new schedule line 10.10.2011 with order quantity 10. or 21.10.2011 schdeule date with 0 quantity.
    Presently system can't save schdeule date 21.09.2011 with o quantity.

  • Total of the ordered quantity in sales order

    Hi
    Is there any settings or functionality for the totalling of the order quantity in the sales order as the user requires to see the total number of the units of quantity of order taken and if its less they can still ask for more order from the customer so that the truck is used for its fullest capacity for transport of the materials.
    thanks
    AJ

    Hi AJ,
    In the standard system up to ERP 5.0 you could use weight and volume for aggregation. Not very useful.
    In SAP ERP 5.0, there is a new functionality called "loading units".
    Quick copy/paste from the release notes:
    As of SAP ECC 5.00, SCM Extension (EA-SCM 500) you can use a loading unit in Dynamic Transportation Planning of the DSD Backend process. A loading unit is an additional capacity limit that limits the maximum delivery quantity of a vehicle. A loading unit is a unit of measure that is independent of the units of measure in order processing.
    For aggregation purposes, the delivery quantities are converted into the loading unit using their conversion factor in the material master. The total quantity in the loading unit is calculated in the order and the delivery and displayed together with the aggregation categories. The loading unit is also shown for information purposes in the shipment as the sum of the deliveries contained in the shipment.
    It says SCM Extension, but that's not APO, only an extension, so it is part of the standard system. Even if it is part of the DSD Backend, you might think of using it independently of DSD.
    Best Regards,
    Franck

  • To POP up the open sales order quantity in Sales order

    Hi gurus,
    I hav a requirement that for example,I raised an order for 100 Qty and delivered 80 materials 20 is open,So when i raise an order for the same material for 50 Quantity,I need to get POP up box saying that 20 qTY IS OPEN. in Sales order.
    I am an SD consultant Please assist me in doing this requirement.
    Regards
    Narayana
    Edited by: manam narayana on Feb 6, 2008 12:08 PM
    Edited by: manam narayana on Feb 6, 2008 12:30 PM

    Hi Usha,
                    Thanks for ur early reply,can u make it clear for me.Like when i enter a sold to party  and material in VA01,This should check the open order quantities for a particular combination of sold to party and material and POP UP a message saying that the customer has open quantities for this material,So this Open quantities i found in VBBE table.Can u please explain me in clear how can i compare the values in T.code VA01 to VBBE table and how can i get  POP UP message.
    Regards
    Narayana
    Edited by: manam narayana on Feb 6, 2008 12:15 PM

  • Minimum order quantity for sales orders

    Hi,
    I need to check the configuration settings where the sales orders can be blocked if the ordered quantity is less than that of minimum order quantity.
    Pls threw some light on this.
    Points assured
    Kitty

    Dear Krishna
    Go To OVAH t code
    message class V4 and message no 082
    Change from warning to error
    The mininum order qty for a material can be set in sales org data 1 tab
    If for a material mininum order qty is set to 10 and if an order is placed for anything less than 10 you will get error message straight away
    No need of any userexit
    With Standard customizing it is possible
    This has has been tested by me recently and you too can test it
    Regards
    Raja

  • Order quantity in sales order

    Hi all,
    In my sales order when I enter the materials and quantity in the item level it does not updates the total quantity. Can anybody give the reason for this? Is it something wrong with my document type customization?

    Dear Sonia Plate
    Please check in Copy control -- UPDATE Document Option is updated
    As per my understanding You have created sales order but unable to check Updated Qty IN MD04 ? If it is right
    Run this program SDRQCR21 Then only it will be updated
    please clear Your issue
    Regards
    venu gopal

  • Confirmed quantity more than the ordered quantity in sales order.

    Hi All,
    We have a situation wherein the confirmed quantity is more than the ordered quantity.
    a.) SO was created for qty1.Two schedule lines were proposed as stock was not available.
    b.) When stock came in and most probablly, when the rescheduling job calling tcode  V_V2 was run, both the schedule lines were confirmed.
    c.) As a result, further processing  is not done by system as confirmed quantity is more than ordered quantity.
    Also we noticed that double schedule line was confirmed for a another order even without the rescheduling job is run.
    Can you please suggest as to why this is scenario is occuring and how we can avoid the reoccurence? Thanks in advance!!
        Regards,
    Jeevan Penumatsa

    Hi  Jeevan Penumatsa
    Welcome to SDN forum
    Generally two schedule lines will take place if stock is not available in your plant or if open orders are there for that material also. So check the stock in MMBE
    .If there are any backorders then it might be getting added in the created sales order and then you might be getting in two schedule lines
    Regards
    Srinath

  • How to reduce order quantity in sales order

    hi
                       I have one scenario in that suppose order quantity 100
    then client want to apply discount on order quantity  suppose it is 25%(manually enterd)
    then quantity applicable for pricing = actual order quantity (100) - quantity not applicable for pricing rate(25%) =75
    then again manually enter some quantity which not applicable for pricing e.g. 5
    then they apply rate on 75-5 = 70 quantity
    EVEN if they delivered  100 hole quantity .
    my problem is that how I can  configure this pricing?
    please help me
    thank you

    Hi,
    1) Create a new discount condition type with Condition class Discount and Calc type Quantity.
    2) Create a Alt Calc type routine in VOFM which would calculate the discount on a fix percentage as maintained in condition record.
    3) Maintain condition record for the discount condition say 25%.
    4) With the help of ABAPer write logic in routine to calculate total order qty and then a discount of 25% based on say PR00, etc
    5) Assign the routine in pricing procedure under Alt Calculation type.
    Regards,
    Amit

Maybe you are looking for