Default order to access data in infocube

Hi all
Lets say we have aggregates activated and filled on infocubes, BIA is implemented and OLAP cache is activated how would the query access the data in the infocube ?
Does anyone know if the default order would be: first OLAP cache, BIA, agreggate and then Infocube ?
Thanks in advance
Rgds,
LB

The default order for the same is :
Query --> OLAP CACHE --> BIA --> Aggregates --> Cube.
If BIA Exists then the query runs completely off BIA and does not go into the next step...
Also you can check the SQl/BIA query  generated for the query in RSRT debug mode for details...
Edited by: Arun Varadarajan on Dec 10, 2009 1:51 AM

Similar Messages

  • Delete access for the Infocube data

    hi,
    If you want to remove the delete access from the infocube , which change should be done to the security role. Please advise.
    Thanks in advance...

    Hi,
    May be you can try this......
    S_RS_ICUBE  
              Activity                      - 03 (display), 23 (maintain), 63 (activate), 66 (refresh). Uncheck 06 (delete)
              Infocube subobject   -  Choose as required....including DATA
              InfoArea & InfoCube - Choose as required.
    Regards,
    Murali.

  • HT201699 My carrier is Straight Talk (using ATT network) and they require the user to enter the APN settings in order to access their data network. My Iphone 4s is factory unlocked but I can not get to the Cellular Data Network tab to enter the settings?

    My carrier is Straight Talk (using ATT network) and they require the user to enter the APN settings in order to access their data network. My Iphone 4s is factory unlocked but I can not get to the Cellular Data Network tab to enter the settings?

    Yes ATT hides the APN settings so when you try to use a st sim it automatically reads on AT&T network so the APN settings are hidden and cannot be accessed however you can go to apn.straighttalk.com on you'r phone and select APN/data settings then select AT&T then iPhone and a screen will pop up asking if you would like to install the profile for whatever reason it's not verified but works fine. You can also go to www.unlockit.co.nz and set up a straight talk APN profile that is verified not sure exactly what that means but both work to get the data working on the phone for straight talk but it does not make the MMS work. There are a couple other methods I have read about one is on howardforums using ibackupbot to manually change the files on the phone I haven't been able to get mine to stick using that method but other people have and there is a sim swap method to trick the phone to reveal APN settings using a tmobile sim I have not tried this but other people have with success. The last two methods mentioned will make both data and MMS work

  • How to restrict access of data in Infocube

    Hi BW Experts,
    We got HR project and we loaded the Data from Flat File. We developed reports as per their requirement.
    As per some condtions, we should not see the HR Data in Infocube as well as in Report.
    We are having only one role which has all authorizations (SAP_ALL and BI_ALL)
    I know one solution i.e, we have to restrict all Infocubes except HR cube, then only we cant see the data. But we dont want to disturb our existing Role.
    Please can any one tell me other solution.
    Regards,
    Anjali

    Hi Anjali,
                Please check here......
    Authorization issue to view cube contents
    Re: Authorization Object issue
    Thanks,
    Vijay.

  • How to Get Default Value of a Data Type in SQL Query.

    Hi all,
    I am creating a procedure which will take input the table name and Column Name.
    In the Output i would like to have the data type and default value of that data type which will be used by a another procedure to blank the selected column in the database.
    I tried with SET NULL on the column but as the database is of navision the table have property set to NOT NULL.
    Here is what i have done till now.
    Create Procedure Get_Column_type
    @parm_table_name nvarchar(200),
    @parm_column_name nvarchar(20),
    @parm_result nvarchar(20)OUTPUT
    AS
    BEGIN 
    select @parm_result =
    DATA_TYPE from INFORMATION_SCHEMA.COLUMNS IC
    where TABLE_NAME = '[' + @parm_table_name +']' and COLUMN_NAME = '[' + @parm_column_name + ']'
    END
    GO
    Now instead on write a case statement for so many data types in SQL, i was thinking is it possible someway that above procedure also returns the default value which i can set in another procedure.
    Let me know if its possible or not? Thanks in advance.

    Do you looking for something like this?
    create table t10 ( c int default 1)
    SELECT so.name AS table_name, 
              sc.name AS column_name, 
              sm.text AS default_value
         FROM sys.sysobjects so
         JOIN sys.syscolumns sc ON sc.id = so.id
    LEFT JOIN sys.syscomments SM ON sm.id = sc.cdefault
        WHERE so.xtype = 'U' 
          AND SO.name = 't10'
     ORDER BY so.[name], sc.colid
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • In Transaction code va41 how to set default sales contract start date

    Hi ,
    In Transaction code " VA41 "  how to set default sales contract start date and end date.
    Can any one tell me the correct user exit for the same.
    Thanks
    Basu

    hi,
    u have to use user exits  or badis.
    use sutable exits mentioned below.
    SDTRM001  Reschedule schedule lines without a new ATP check          
    SDVFX006  User exit: Tax line (transfer to accounting)               
    V45A0001  Determine alternative materials for product selection      
    V45A0002  Predefine sold-to party in sales document                  
    V45A0003  Collector for customer function modulpool MV45A            
    V45A0004  Copy packing proposal                                      
    V45E0001  Update the purchase order from the sales order             
    V45E0002  Data transfer in procurement elements (PRreq., assembly)   
    V45L0001  SD component supplier processing (customer enhancements)   
    V45P0001  SD customer function for cross-company code sales          
    V45S0001  Update sales document from configuration                   
    V45S0003  MRP-relevance for incomplete configuration                 
    V45S0004  Effectivity type in sales order                            
    V45W0001  SD Service Management: Forward Contract Data to Item       
    V46H0001  SD Customer functions for resource-related billing         
    V60F0001  SD Billing plan (customer enhancement) diff. to billing plan
    Edited by: katigiri linganna on Apr 28, 2009 12:19 PM

  • Do not Extract from PSA but Access Data Source (for Small Amounts of Data)

    Hi Experts,
    In the DTP, the above option is available for Full Loads for certain extractors but not for others, particularly, certain HR extractors?
    Is there a way to make it available for HR extractors?  Is there a setting that needs to be updated in ECC or in BI?
    Thank you for your help!

    Hi,
    There is no special setting for this, Please see the detail description:
    Data is not extracted from the PSA for the DataSource; it is requested from the data source directly at DTP runtime.
    Use
    You use this mode for small data sets and full uploads, for example, small sets of master data. With file source systems, note that the file has to be available on the application server.
    Dependencies
    You do not have to create an InfoPackage in order to extract data from the source.
    Data in the data source is accessed in "direct access mode". This has certain consequences, especially if you are extracting data from SAPI systems:
    Data is extracted synchronously. This places a particular demand on the main memory, especially in remote systems.
    The SAPI extractors may respond differently than during asynchronous load since they receive information by direct access.
    SAPI customer enhancements are not processed. Fields that have been added using the append technology of the DataSource remain empty. The exits RSAP0001, exit_saplrsap_001, exit_saplrsap_002, exit_saplrsap_004 do not run.
    If errors occur during processing in BI, you have to extract the data again since the PSA is not available as a buffer. This means that deltas are not possible.
    In the DTP, the filter only contains fields that the DataSource allows as selection fields. With an intermediary PSA, you can filter in the DTP by any field.
    Regards,
    Kams

  • I have 3 macs. 2 are Lion, 1 I left Snow leopard so I can access data from my old Quicken Application that doesn't work with Lion. If I move to iCloud, will I no longer be able to access my MobileMe email on the Snow Leopard mac?

    I have 3 macs. 2 are Lion, but 1 I left Snow leopard so I can access data from my old Quicken Application that doesn't work with Lion. If I move to iCloud, will I no longer be able to access my MobileMe email on the Snow Leopard mac?

    What version of word do you have? The TS3938 sounds like it's a PowerPC app- written for an old architecture that is no longer supported in Lion. If this is the case, your files are fine- you just need a newer version of word that will run in Lion in order to open them. The newest version (2011) should be readily available anywhere, and has worked fine for me ever since I switched to Lion on release day....

  • Sales Order - Requested Delivey Date

    Hi All,
    Please help me resolve this requirement.
    In sales order we have a field 'Requested Delivery Date', Normally the requested delivery date is default todays date only. If not proposed by system, we have to enter it manually.
    In our project we have maintained cusotomer calendar, where some dates in an year are specified.
    Only on such dates order is possible to be delivered to the customers.
    While creating such order, we get an information message, that "no goods accepeted on 24.06.2008, the next possible date is 28.06.2008"
    This date (28.06.2008) comes from the cuustomer calendar attached to the customer master in view Unloading points.
    Now how can this date be automatically copied to the requested delivery date field so as to make the order not possible to be delivered on the todays date, & only possible to deliver on the date (28.06.2008) which is the date from customer calendar.
    I repeat, instead of automatic determination of req delivery date, or instead of manual entry, system should pick the date automatically from customers calendar after entry on Ship to party in the sales order.
    Regards
    Dhananjay

    Hi,
    sorry I just forgot to share it with all.
    See, our requirement was sales order should have delivery date into it, not proposed by system by to be fetched from the calendar maintained in the ship to party customer master record.
    We acheived this by using a feild exit for Data element "KETDAT" - Requested delivery date of the document.
    In this we incorporated the logic like to fetch the date from the calendar, additionally a function module "DATE_CONVERT_TO_FACTORYDATE" was also used.
    Whenever user creates a sales order, the system date automatically comes by default, by is replaced by the date from calendar, & a message is also passed "Change in the route calendar date"
    I am glad to inform you this worked out very well.
    Hope this is helps you all.
    Regards,
    Dhananjay

  • Accessing data from other SAP system

    Hi experts
    I need to access data from one SAP system from other.  My requirement is , perform applications (programs) in some SAP system, but using/accessing  data from other SAP system .
    For example, when we press F4 we get the match code (search help) for the field ;  that window is alredy created by SAP and it shows the data for that field . Of course the application (ike any other program/application) read the data from the SAP system is being executing ;  well i need execute that match code but show (taking) the data from other SAP system;  i not refer to other MANDT in same system but other SAP system.
    The communication between SAP1 system and SAP2 system is already created from BASIS.
    My doubt is how can i  execute that standard application (search help) but 'invoke' to standard application this take data from other system ?
    I guess i can create Z search help wich call a Z Function (RFC) to get the data required from the other system ;
    or maybe enhance the standar search help to call that Z RFC ;  but standard application search help is already created and this access the data in several ways or places of code , and this has severals sub-windows and search features ; and i just need execute exactly same search help but accesing data from the other SAP system ; so my doubt is, is there some way to indicate to SAP the applications always (wherever) these applications acces the data do it but from other SAP system, 
    like if we 'redirect' the Data Base to other SAP system. 
    SAP1 applications are being executing  -
    >   but all data (records) are taking from SAP2
    Maybe the first suggestion is simply why do not we execute applications in SAP2 instead SAP1 , that's because the version package in SAP2 system (where we have the data) does not support some (non SAP) applications we need to use.
    Excuse the long thread.  Does somebody can help, any idea ?
    Best Regards
    Frank

    Hi Frank,
    Below are my thoughts, these are only conceptual and haven't had an opportunity to try these possibilities, also not sure if this is the right thing.
    1) Create an entry in DBCON using TCode: DBCO for the Database of system SAP2. Now in the application of SAP1 use the "SET CONNECTION" construct as the very first statement, so that consecutive SQL statements will point at the DB of SAP2.
    2) I have read somewhere that the Work Processes are connected to the Default database and i am not sure if you can change this setting, but if you can and provided you have have multiple application servers in your SAP1 landscape, then pick one of the application servers and change the settings on the WP to point at the DB of SAP2, you have the end users login to this particualr app server.
    3) If there are multiple app servers in SAP1 landscape, then choose one of the app servers and change the default database setting to point at DB of SAP2.
    Regards,
    Chen

  • Last access date of fields in sql server table

    Hello All,
    is there any queries to find last access date of all fields in sql server tables.
    because in our database table having no of field,most of fields are unused from long time.we want drop those fields from tables to make the table light.
    Thanks In Advance!!!
    mastanvali shaik

    Do the fields have indexes?
    In SQL Server 2005 you can use the sys.dm_db_index_usage_stats data 
    management view, look at the column last_user_update, you can also see when 
    the table was last accessed (last_user_seek and last_user_scan - do a MAX on 
    them).
    SELECT
        last_user_seek = MAX(last_user_seek),
        last_user_scan = MAX(last_user_scan),
        last_user_lookup = MAX(last_user_lookup),
        last_user_update = MAX(last_user_update)
    FROM
        sys.dm_db_index_usage_stats
    WHERE
        [database_id] = DB_ID()
        -- if you want to leave out system objects, uncomment the next line:
        -- AND OBJECTPROPERTY(object_id, 'IsMsShipped') = 0
    --last modified date
    select name,modify_date from sys.procedures
    order by modify_date desc
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • IC_TRAN_PND의 TRANSACTION DATE가 ORDER의 SCHEDULED SHIP DATE와 불일치시 처리방법

    제품: MFG_GMI
    작성날짜 : 2005-11-29
    IC_TRAN_PND의 TRANSACTION DATE가 ORDER의 SCHEDULED SHIP DATE와 불일치시 처리방법
    ====================================================================
    PURPOSE
    IC_TRAN_PND의 Transaction Date이 잘못되어, Order의 Scheduled Ship Date와 match되지 않는 경우의 해결방법을 기술하고자 함.
    Problem Description
    OMSO order lines에 대한 pending default transaction에서 transaction date가 Order Line의 scheduled ship date와 일치하지 않는다.
    이것은 MRP를 통해, 잘못된 날짜의 Plan 정보를 발생시킨다.
    Instance: 11.5.8 patchet J
    Workaround
    Order Header level에서 Request_date를 Order line level의 schedule ship date로 변경시킨다. 이는 IC_TRAN_PND의 trans_date에 반영된다.
    Solution Description
    This issue has been fixed in the files:
    GMIURSVB.pls version 115.133.115100.9
    GMIURSVS.pls version 115.35.115100.1
    To implement the solution, please execute the following steps:
    1. Please download and review the readme and pre-requisites
    for Patch 4560700
    2. Please apply Patch 4560700 in a test environment.
    3. Please confirm the following file versions:
    GMIURSVB.pls version 115.133.115100.9
    GMIURSVS.pls version 115.35.115100.1
    You can use the commands like the following:
    strings -a $GMI_TOP/filename |grep '$Header'
    4. Please retest the issue.
    Reference Documents
    Bug 4560700

  • BIA Test: Suggestion for creating enormousTest Data for Infocubes

    Hi,
    I need to create some enormous amount of data for infocube in order to test BIA.
    I don't think my basis team will allow me to load data from Production to Sandbox and moreover production has less than 250 millions records.
    Any suggestion for 250 million records?

    Hello,
    Just an idea. If you can load a minimum of data for your cube then it is easy.
    You just have to generate for your cube for instance a datasource and then create some update rules to loop on your data.
    a. generate export datasource
    b. map it to your infosource
    c. define some update rules to ensuere your data will be different. For example in the start routine.
    Hope it helps.
    Patrice

  • VBAP-SERNR is not provided in BILLING REQUEST as it is in the DEFAULT ORDER

    Dear SD Sales and Delivery experts,
    i would appreciate your support very much!!!
    We want the system to transfer the maintained field VBAP-SERNR from the document DEFAULT ORDER (Program: SAPMV45A / Table control: TCTRL_U_ERF_AUFTRAG) to the succeeding document BILLING REQUEST (Program: SAPMV45A / Table control: TCTRL_U_ERF_GUTLAST). But the table control of the billing request does not provide this field. The Screen Sequence grp. for the order is AU and for the billing request it is GA.
    Does anyone has got an idea how to hit this target?  
    Many Thanks in advance
    Stephan Sislian
    SD Senior Consultant
    argotas GmbH & CoKG
    Germany

    Hi,
    In the approver step there is ABAP class has been maintained (CL_PT_REQ_WF_ATTRIBS) and the methods used is DUMMY.
    Inside the class there is another method (APPROVE)..The code of the method  which is standard is like that:
      DATA: request TYPE REF TO if_pt_req_request,
            event   TYPE tim_req_xfer_event VALUE cl_pt_req_const=>c_reqtrans_approve.
      CALL METHOD cl_pt_req_badi=>get_request
        EXPORTING
          im_req_id  = me->req_id
        IMPORTING
          ex_request = request.
      CALL METHOD cl_pt_req_badi=>initiate_state_transition
        EXPORTING
          im_request    = request
          im_event      = event
    *    IM_RET_VALUE  = 0
        IMPORTING
          ex_new_status = me->status.
    I think the status is coming from the code.There is another method like  SET_WF_ATTRIBS where the code for status retrieval is :
      status = im_attribs-version-status.
    Suvajit..

  • Image file access dates changing in mass (Windows).

    In review of the access date properties for image files within a directory being accessed by Bridge within the Favorites area, they are all changing to the current time and date, even if the image is not viewed within Bridge.  Why are the access dates of image files being changed even though they are not viewed?  This makes it hard to determine whether an image can be archived or deleted based on last access if Bridge is always changing the access date every day.  Thanks for any insight you can give on this!

    Is there a way to turn off the caching of thumbs or metadata or whatever is causing the Access date to change when searching or reviewing images within a directory using Bridge?
    As said, no experience with network environment. But Bridge is a browser and when you want to view things it needs to cache the file and data first.
    Having said that, in normal usage (stand alone) it stores and saves this data in the cache folder and once it has done so it will not need to recache until you have made changes to the file. Check Bridge prefs / Cache/ Location  to see where the data is stored when you are using this machine.
    By default on a stand alone Mac (windows seems to have a similar cache file) it should be in the User Library/ caches/ Adobe/ Bridge CSxx and inhere is a plug in and a folder called Cache, containing several folders.
    For Bridge CC there are 4 folders, 256 (the cache files of the thumbs) 1024 (containing HQ preview cache files) data (what it says) and full (containing the 100% previews in cache)
    All files that have been fully cached (pointing to a folder the content window should show already good thumbs and the activity bar bottom left in Bridge window should not show any activity, only the number of items showing and items hidden) don't need to recache for that machine again unless you changed something to the file or added metadata.
    So once cached there should be no reason for Bridge to 'access' the file again unless access means looking for the file to check if the saved data still applies to the corresponding file on your machine, but then al files should show about the same access time because this is a very fast process on a fast machine.
    You can't deselect cache because as said Bridge is a browser showing the content of your files, and to show this it has to generate a thumb and if needed a preview. But as also said, once cached it normally should not start recaching until changes are applied.
    You have several ways to set the quality of the cache:
    There are two checker board icons top right that give you the option to set for cache. By default it is set to 'Always HQ' to have both good thumbs and a good preview when pointing to a file.
    Then you also have to option to generate 100 % previews which provides you with almost instant 100 % previews for loupe in preview panel or full screen view and click. Logically this needs more time and generates a lot of big cache files, all depending on the files you start with and the size of your monitor.
    Finally you have the option to use embedded previews only. This is a very quick method but provides low quality thumbs (black border around it) and when clicking on a thumb it first needs to generate a HQ preview that then will take time.
    In Bridge prefs advanced there is the option to create also monitor sized previews which should provide you with good quality full screen when using space bar in Bridge to preview in full screen.
    This setting also creates a bit larger cache files in the 1024 folder depending on the size of your monitor (logical).
    And if you want to apply a search using the find command you also have to include non indexed files to search in all folders, including the not before cached files.
    Like first time cache this first indexing takes some extra time but should only need to be done once and then be persistent until you add new files or folders that have not been cached or indexed before.
    Until so far the theory for a stand alone. If you have the files stored in a Network and other stations have access and have different cache settings or monitor size settings there might be some other things going on, or someone else has changed the file on their station and then when you select that folder Bridge needs to recache the changes.
    Hopefully this makes some sense for you?

Maybe you are looking for