Defaulting Document Currency in Sales Documents

Hi,
We have a requirement where in we need to default the document currency in a sales document based on certain rules.
As far as i know, the document gets picked up automatically if a Billing currency is maintained in the Sales Area data of the Sold to party.
Just wanted to find out is there any other way by which we can pick the currency in a document ? I am looking at non custom ways of achieving this.
Thanks in advance
Varun

Hi,
CURRENCY will be taken from the CONDITION RECORDS of CONDITION TYPE in VK11
That is the Priority over others.
regards,
santosh

Similar Messages

Default document currency as per document type for sales order

Dear All,
We are facing problem in Default document currency as per document type for sales order,
Our requirement is not to give currency in customer master & set it as default document currency as per document type,
for example: Document type 'OR' default currency 'INR',
                     Document type 'ZEU' default currency 'EUR',
                     Document type 'ZUS' default currency 'USD',
                     Document type 'ZNP' default currency 'NRP,'
                     Document type 'ZAF' default currency 'RAND,'
Is it any how possible in standard setting ?,
Regards,
Sai

Hi,
The system proposes the sales document currency from the customer master record of the sold-to party. You can change the currency manually in the document or change in currency in customer master. If you change the currency, the system recalculates prices for the entire document.
to determine different currrency in sales docuement you need to write an user exit and then overwrite the docuement currency copied from customer master. Try user exit 'USEREXIT_MOVE_FIELD_TO_VBAK' under include MV45AFZZ for this change.
with regards
vivek.

DOCUMENT TYPE VS SALES DOCUMENT TYPE

Hi friends
can u plz help me to find out difference between DOCUMENT TYPE and SALES DOCUMENT TYPE in terms of contain which they include. and their function.

Hi,
Sales Doc type : A sales doc type is a doc which controls how the data is to function,how it is to be displayed and the pricing of the document type.
A sales doc is devided into
1. Pre sales Doc: Inquiry,Quotation
2. Sales orders : cash sales,Rush orders,Order
3. Outline agrements: Rebates,contracts etc
4. Complints : debit memo,credit memos etc
5. Special sales Docs : Third partysales,Consignment sales etc
All the 5 mentioned above are different document types.
Based on the Doc type which we enter in the transaction the system will repond according to that.
Reward if it helps..

Document flow in sales document

How to activate or deactivate document flow in sales document?

Hi Kedu,
Whenever you want the document flow to be active go to Copy control. For e.g let us see the document flow updation in Sales order to Delivery flow. T-code used is VTLA. Here select the Delivery type & the Sales order type and select on ITEM details. Here select the correct Item category you are using and then view the details. Here you can see a Update Document flow selection Option. Select it. Now try once sales cycle and view the document flow updation.
Hope the above helps you.
REWARD if it helps you!!
Regards,
Ajinkya

Adding a Document to a Sales Document

Is it possible? or how do you add or attach an unrelated document to a sales document.
For example for each quote you print or E-mail have behind the quote a page outlining sale offers etc.
Thanks.
Jim

To connect a document to the marketing documents, you should create a Link type UDF:
1.Tools / Customization tools / User defined field management
2. In the window select the Marketing documents / Title line, click Add and
3. Select General Type with Link structure.
After this double clicking in the UDF you can browse the document you want to connect.

STWAE-Change a statistics currency in sales document

Hi,
I have 5 Sales Order and 4 Bills with a statistics currency and I need to change this statics currency by another.
Someone known if is it possible this change? How?
Thanks in advance!
XeviG.

Hi,
Document currency is the currency appearing at the header of the document under "Pricing and Statistics " tab. The field label is "Doc Currency". Hence there is no mistaking it. It can flow from the customer master , or can be manually entered in the sales order.
Condition record currency is the currency one enters at the line item level.
System will always convert the item level value into document currency value. For instance, if the line item amount is 100 USD and doc currency is INR, then condition value will be 4000 INR, if the exchange rate is 40 INR / USD. Also please note that net value of the line item and sales document will always be in document currency.
Muraleedharan.R
091 9880028904

Currency in Sales Document

Hello all,
How is the currency determined in a sales order. And also what will happen if the sales order currency and condition record currency are different.
Edited by: Kumar Reddy on Dec 17, 2007 3:05 PM

Hi,
Document currency is the currency appearing at the header of the document under "Pricing and Statistics " tab. The field label is "Doc Currency". Hence there is no mistaking it. It can flow from the customer master , or can be manually entered in the sales order.
Condition record currency is the currency one enters at the line item level.
System will always convert the item level value into document currency value. For instance, if the line item amount is 100 USD and doc currency is INR, then condition value will be 4000 INR, if the exchange rate is 40 INR / USD. Also please note that net value of the line item and sales document will always be in document currency.
Muraleedharan.R
091 9880028904

Different billing document for Same Sales document

Hi guru's
I have scenario like this
Sales document is ZZOR for all countries but billing document will be different from country to country
Could you please light on this
Thanks and Regards
Srinivas Kapuganti

Hi,
Now, as your requirement goes I can suggest you something on this as below:
Presuming you are doing delivery related billing as of now, then you need to maintain copy control between your delivery type to different billing types. Then while doing VF01 you need to manually select the billing type depending upon your country. Same thing will be applicable for order related billing as well.
Hrishi

Document flow for sales document

It is possible NOT update the document flow when i create sales document with reference to onther sales document?
Thanks.

When you don't want to have a relationship between to doc and want use only for reference then you can use - Dynamic Product Proposal or simply, user can refer the items from existing doc (to do this in sales order overview screen, press CRTL+F11, explore the option-easy without config )
A product proposal is a list of products for a specific customer that is automatically proposed during sales document processing. You can decide for yourself which materials should be displayed as product proposals in the sales document. You can also determine the sequence in which the materials appear in the product proposal.
During sales document processing, the system displays a product proposal in the item overview according to the customer and the business transaction. It displays the material number, material description, and historical order quantites in the sales unit last used. To use a material again, you just have to copy it. The system does not run the standard checks (pricing, availability, incompletion, material determination, free goods determination and so on) until you have entered the order quantities.
The product proposal is both an entry help and an aid to sales support and promotions. It is particularly useful in Telesales, where the employee automatically receives a display of all the materials that are of interest to a particular customer. This helps them to provide appropriate advice to the customer quickly and easily. The sales document history enables you to analyse the purchasing behaviour of a customer and recognize early on if it changes, for instance, when the customer suddenly stops ordering a product.
The product proposal differs to cross-selling in that it is dependent on the customer and sales area, and is displayed in the sales document as soon as you have entered a customer. Cross-selling, on the other hand, is triggered by a material. In other words, the system proposes cross-selling materials according to the material or a characteristic of the material you have entered.
You can determine the product proposal from different data sources:
-Order history
-Listed materials
-Excluded materials
-Item proposal
-Customer-material info records
-Customer-specific data sources
You can combine materials from these data sources to create a product proposal. The system then accesses the data sources either online or in the background.
To define a product proposal for sales document processing, you must carry out the following activities in Customizing:
-Define customer procedure for product proposal
-Define document procedure for product proposal
-Assign document procedure for product proposal to order types
-Maintain table of origin for product proposal
-Define product proposal procedure and determine access sequences
-Maintain procedure determination (in background) for product proposal
-Maintain procedure determination (online) for product proposal
The product proposal procedure determines how the system displays the product proposal in the sales document. For instance, if the system has accessed the order history, it determines how many columns should be displayed in the sales document, in which period intervals thehistoric order quantities should be displayed (for instance, day, week, or month), and most importantly, the sequence in which the system should access the data sources (for example, order history, listing, exclusion).
The product proposal procedure depends on the:
- Customer determination procedure
The customer procedure determines which product proposal procedure the system automatically uses when you create a sales document for a particular customer. It is specified in the customer master record per sales area.
- Document determination procedure
The document procedure determines which product proposal procedure the system automatically uses for a certain document type. The document procedure is stored as a key in the header for the sales document type.
If you use online processing, the product proposal procedure is determined according to the customer and document determination procedures.
If you use background processing, the product proposal procedure is determined according to the sales area in the customer master and the customer determination procedure. It does not use the document determination procedure because the document type is not recognized in background processing
Hope this can assist.
Thanks & Regards
JP

Sales order document currency

Dear All
I have an issue , when i create sales order, the document currency is GBP(POND) for this customer
When i create condition record in USD , for same its allowing to create , this creates problem in billing
Is their any configuration settings that it should not allow to save the order if document currency is diffrent
and condition record created from difrent currency,
IF DOCUMENT CURRENCY OF SALES ORDER IS GBP, WHEN I CRREATE CONDITION RECORD FOR PRICING IN VK11 WITH CURRENCY USD TIS ALLOWING TO CREATE, ANY WAY TO STOP THIS
Regards
jahangir

Hi Jahangir,
One way to take care of this even though VK11 created with different currency is
in V/06 for condition type detail, in control data2 choose Currency conv.
which will take care of converson from condition recrod to Document currency below is the help detail FYR
Indicator: Currency Translation after Multiplication
Controls the currency conversion where the currency in the condition record varies with the document currency.
Use
To calculate a condition value in a document, the system multiplies the amount that results from the condition record by the item quantity. This indicator controls whether the system carries out currency conversion before or after the multiplication takes place.
Procedure
If you mark the field, the system converts the condition value into the document currency after multiplication. If you leave the field blank, the system converts the condition value into the document currency before multiplication.
Regards,
Siva

Explanations on Sales Documents

Can anybody send explanations about sales documents that I have mentioned below?
Inquiry IN
Quotation QT
Free-of-charge delivery FD
Standard sales order OR
Cash sale BV
Rush order SO
Quantity contract CQ
Maintenance contract WV
Rental contract MV
Scheduling agreement DS
Credit memo request CR
Debit memo request DR
Subsequent delivery, free-of-charge SD
Returns RE

hi
==============================
can also refer to the link below for more info on SD ..
SD Process Flow
==============================
SD FLOW:
Sales
Inquiry - A customers request to a company that they provide a quotation or sales information without obligation. An inquiry can relate to materials or services, conditions and if necessary delivery dates. The sales area that accepts the inquiry becomes responsible for further processing.
Quotation - A quotation presents the customer with a legally binding offer for delivering a product or providing a service within certain fixed conditions. This offer is legally binding for the company within a specified time period. A sales area can reply to a customer inquiry with a customer quotation or use it to refer to a business partner contact.
Sales Order - Request from a customer to a company to deliver a defined quantity of products or provide a service at a certain time.
The sales area that accepts the inquiry is responsible for completing the agreement.
Create Delivery:a. Picking - The picking process involves taking goods from a storage location and staging the right quantity in a picking area where the goods will be prepared for shipping.
b. Packing - Packing is part of delivery- and shipment processing. When you process a delivery, you can select delivery items for packing and assign them to handling units (HUs).
c. Goods Issue - As soon as the goods leave the company, the shipping business activity is finished. This is illustrated using goods issue for outbound deliveries.
Billing - Billing represents the final processing stage for a business transaction in Sales and Distribution. Information on billing is available at every stage of order processing and delivery processing.
Sales Order Management Transactions
SALES ORDER PROCESSING
Creating Sales Order - VA01
Maintaining a Sales Order - VA02
Displaying a Sales Order - VA03
Releasing an Order or Delivery from Credit Hold: Non-Flooring - VKM1
Display List of RMAs by Customer - VA05
Confirm RMA Goods Receipt - VL02
Generate list of open return orders for deletion - VA05
Display Customer returns eligibility - MCSI
Removing a Billing Block (Approving Credit/Debit Requests) - V.23
PRICING MASTER DATA
Create Pricing - VK11
Creating a Sales Deal - VB21
Maintaining a Sales Deal - VB22
Displaying a Sales Deal - VB23
Maintaining Prices - VK12
Displaying Prices - VK13
MATERIAL MASTER DATA
Creating Material Substitution Master Data - VB11
Maintaining/Deleting Material Substitution Master Data - VB12
Displaying Material Substitution Master Data - VB13
Creating a Bundled Master - MM01
Creating a Sales BOM - CS01
Maintaining a Sales BOM - CS02
Displaying a Sales BOM - CS03
CUSTOMER MASTER DATA
Creating Partner Records - XD01
Maintaining Customer Master Data - XD02
Displaying Customer Master Data - XD03
Deactivating a Partner - VD06
CUSTOMER CREDIT INFO
Creating/Maintaining New Customer Credit Information - FD32
Displaying Customer Credit Information - FD33
Blocking or Unblocking a Customer - VD05
SHIPPING
Creating a Delivery - VL01N
Displaying a Delivery - VL03N
Changing a Delivery - VL02N
Shipment Inquiry / Display - VT03
Adjusting Transfer Order - Confirmation Quantity - LT12
Collectively Confirm Transfer Order - LT25
Batch Shipment Confirmation - VL19
PGI Reversal Cancellation - VL09
Creating Service Provider/Carrier Master Data - XK01
Maintaining Serive Provider/Carrier Master Data - XK02
Displaying Service Provider/Carrier Master Data - XK03
Maintaining Product Master/Serial # Profile/Unit of Measure/Shipping Unit - MM02
IDoc Inquiry - WE02 / WE05
BILLING
Invoicing a Customer Shipment - VF01
Reprinting an Invoice - VF31
Releasing a Sales Order for Billing - V.23
Creating an Invoice by Using the Billing Due List - VF04
Checking Open Billing Documents - VF05
Create Credit/Debit Memo - FB01
A/R
Controlling Total Debit/Credit bkgs - F.03
Generate FI Account balance - F.08
Generate Month-to-date Inv. register - F.02
Process payments - FBZ1
Rqst Individual Customer Corresp. - FB12
Generate Customer Correspondence - F.61
Enter Batch totals under Control ttl - FB07
Display G/L Acct. totals - FBL3N
Reverse Posted Amounts - FB08
Customer Refunds - FBL6
Customer Refund to other than Payer - FB05
Clearing Debit/Credit on Cust. acct. - FB1D
Customer Balance in Local Currency - F.23
G/L Account Balance Report - F.08
Create Invoice - legal entity adjust - FB01
Generate Cust. Acct. statements - F.27
Generate Dunning Letters - F150
Generate Billing Due List - VF04
Generate Blocked Billing Doc list - VFX3
Inq. via Credit Release Screen - VKM1
List orders by partner - VA05
Past Due invoices by customer - FD11
Check number info by G/L account - FBL3N
Display customer Line items - FBL5N
SD Configuration:
Enterprise Structure:
1. Maintaining Sales Organization
Sales Organization is an organizational unit responsible for the sale of certain products or services.
IMG -> Enterprise Structure -> Definition -> Sales and Distribution -> Define, copy, delete, check Sales organization
2. Assigning Sales Organization to Company Code
This assignment ensures all the sales made through this Sales Organization are accounted for in the assigned Company Code (Company Code is created by FI Consultant).
IMG -> Enterprise Structure -> Assignment -> Sales and Distribution -> Assign Sales Organziation to Company Code
3. Maintaining Distribution Channel
Distribution Channel is the way, in which Products or Services reach Customers.
IMG -> Enterprise Structure -> Definition -> Sales and Distribution -> Define, copy, delete, check distribution channel
4. Assigning Distribution Channel to Sales Organization
This assignment ensures, a Sales Organization can supply Materials to Customers through this Distribution Channel.
IMG -> Enterprise Structure -> Assignment -> Sales and Distribution > Assign distribution channel to sales organization
5. Maintaining Division
Division is a way of grouping materials, products, or services.
IMG -> Enterprise Structure -> Definition -> Logistics - General -> Define, copy, delete, check division
6. Assigning Division to Sales Organization
IMG -> Enterprise Structure -> Assignment -> Sales and Distribution -> Assign division to sales organization
7. Setting up Sales Area
All the sales are made from a particular sales Area. For creating a Sales Order Sales Area is compulsory.
IMG ->Enterprise Structure -> Assignment -> Sales and Distribution -> Set up sales area
8. Assigning Sales Organization- Distribution Channel- Plant
Plant is created ny MM Consultant.
IMG -> Enterprise Structure -> Assignment -> Sales and Distribution -> Assign sales organization - distribution channel - plant
9. Define Shipping Points
Shipping Point is the Organizational element, which is responsible for shipping the Materials to the Customers.
IMG -> Enterprise Structure -> Definition -> Logistics Execution -> Define, copy, delete, check shipping point
10 Assigning Shipping Point to Plant
This assignment ensures that goods from different Plant can be dispatched from different Shipping Points.
IMG -> Enterprise Structure -> Assignment -> Logistics Execution -> Assign shipping point to plant
Note: Ensure to do the undermentioned configuration also though it is not in Customizing node of Enterprise Structure.
11. Defining Common Distribution Channels for Master Data
Use
The purpose of this activity is to define distribution channels which have common master data..
Procedure
Access the activity using one of the following navigation options:
IMG Menu -> Sales and Distribution -> Master Data -> Define Common Distribution Channels
Transaction Code: VOR1
12. Defining Common Divisions for Master DataUse
The purpose of this activity is to define distribution channels which have common master data..
Procedure
Access the activity using one of the following navigation options:
IMG Menu -> Sales and Distribution -> Master Data -> Define Common Division
Transaction Code: VOR2
Pricing Procedure
In SD, Pricing Procedure is determined based on Sales Area (Sales Organization + Distribution Centre + Division) + Customer Pricing Procedure + Document Pricing Procedure. Sales Area is determined in Sales Order Header Level. Customer Pricing Procedure is determined from Customer Master. Document Pricing Procedure is determined from Sales Document Type / Billing Type (if configured). Once the pricing procedure is determined, Condition records are fetched. If appropriate condition records are found, the price is determined. If Mandatory pricing condition is missing, system will through an error message.
In SD, the steps to configure Pricing procedure are as under:
Step 1:
Condition table: If existing condition table meets the requirement, we need not create a new condition table. Considering the requirement for new condition table, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Condition Table (select the required fields combination, which will store condition record).
Step 2:
Access Sequence: If existing access sequence meets the requirement, we need not create a new access sequence. Considering the requirement for new sequence, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Access Sequence (Access sequence is made up of Accesses (Tables) & the order of priority in which it is to be accessed. Here we assign the condition table to access sequence.
Step 3:
Condition Type: If existing condition type meets the requirement, we need not create a new condition type. Considering the requirement for new condition type, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Condition Type. It is always recommended to copy an existing similar condition type & make the neccessary changes. Here we assign Access sequence to Condition type.
Step 4:
a. Pricing Procedure: It is recommended to copy a similar pricing procedure & make the neccesary changes in new pricing procedure. Pricing Procedure is a set of condition type & arranged in the sequence in which it has to perform the calculation. Considering the requirement for new Pricing Procedure, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Pricing Procedure --> Maintain Pricing Procedure.
b. Pricing Procedure: After maintaining the pricing procedure the next step will be determination of pricing procedure. Configuration for determining pricing procedure in SPRO is as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Pricing Procedure --> Determine Pricing Procedure.
5. Condition record: Condition record is a master data, which is required to be maintained by Core team / person responsible from the client. During new implementation, the condition records can be uploaded using tools like SCAT, LSMW, etc.
Normal Sales Order Cycle:-
Step 1: Sales Document Type
IMG > Sales and Distribution > Sales > Sales Documents >
Sales Document Header:
1. Sales Document Type:The sales document types represent the different business transactions, such as Inquiry, Quotation, Sales Order, etc. To create new sales order type, always copy as with reference to similar sales order. If possible use standard sales order.
2. Define Number Ranges For Sales Documents: Maintain number range with discussion with core team.
3. Assign Sales Area To Sales Document Types:
A. Combine sales organizations / Combine distribution channels / Combine divisions: Ensure to maintain these, else Sales Order creation will give error.
B. Assign sales order types permitted for sales areas: Assign only required Sales Order Types to required Sales Area. This will minimize selection of Sales Order Type as per sales area.
Sales Document Item:
1. Define Item Categories: If possible use Standard Item Category. Incase if required to create new, copy as from standard & maintain New.
2. Assign Item Categories: If possible, use standard. Formula for deriving item category: Sales Document Type + Item Category Group + Usage + Higher Level Item Category = Item Category
Schedule Line:
1. Define Schedule Line Categories: If possible use Standard Schedule Lines. Incase if required to create new, copy as from standard & maintain New.
2. Assign Schedule Line Categories: If possible, use standard. Formula for deriving Schedule Line: Item Category + MRP Type / No MRP Type.
Step 2:
IMG > Logistic Execution > Shipping > Deliveries >
1. Define Delivery Types: If possible use Standard Delivery Type. Incase if required to create new, copy as from standard & maintain New.
2. Define Item Categories for Deliveries: If possible use Standard Item Categories for Delivery Type. Incase if required to create new, copy as from standard & maintain New.
3. Define Number Ranges for Deliveries: Ensure to maintain number range.
Step 3:
IMG > Sales and Distribution > Billing >
1. Define Billing Types: If possible use Standard Billing Type. Incase if required to create new, copy as from standard & maintain New.
2. Define Number Range For Billing Documents: Ensure to maintain number range.
3. Maintain Copying Control For Billing Documents: Maintain relevant copy controls such as Sales Order to Billing, Deliver to Billing, etc.
he configuration differs from scenario to scenario & requirement of the client.
Interesting &important link to learn much more about configuration & business process is as under:
Link: http://help.sap.com/
Path: SAP Best Practices --> Baseline Packages --> Based on SAP ECC 5.00 --> Select Country: for eg, Localized for India --> Technical Information --> Building Blocks --> Select Country for eg, India --> List of Basic Configuration & scenarios will be listed.
Select the required basic configuration / scenario. These will consist of overview, configuration guide, business process, master data &so on.
====
Cash Sale & Rush Order
Cash Sales and Rush Orders
====
Contracts
General Contract Processing
http://help.sap.com/erp2005_ehp_02/helpdata/en/5e/69a1228f6211d2a9f60000e8a6f09e/frameset.htm
Renewing Contracts
http://help.sap.com/erp2005_ehp_02/helpdata/en/2c/275c9c456a11d189440000e829fbbd/frameset.htm
Subsequent Rental
http://help.sap.com/erp2005_ehp_02/helpdata/en/42/c820c5f8191377e10000000a1553f7/frameset.htm
Real Estate Contract
http://help.sap.com/erp2005_ehp_02/helpdata/en/8d/fb783b05efdb18e10000000a114084/frameset.htm
Value Contract
http://help.sap.com/erp2005_ehp_02/helpdata/en/dd/55fd7a545a11d1a7020000e829fd11/frameset.htm
Creating and Sending Complaint Notifications
http://help.sap.com/erp2005_ehp_02/helpdata/en/2a/df32f73d7a4bbd8d6e50b32e9227e8/frameset.htm
Use of Value Limits (for Unplanned Services)
http://help.sap.com/erp2005_ehp_02/helpdata/en/c3/72cd0755cd11d189660000e8323c4f/frameset.htm
====
Quantity Contract
http://help.sap.com/erp2005_ehp_02/helpdata/en/dd/55fd60545a11d1a7020000e829fd11/frameset.htm
http://help.sap.com/erp2005_ehp_02/helpdata/en/70/23c791419311d2ac100000e829fbfe/frameset.htm
Batch Determination in Quantity COntract
http://help.sap.com/erp2005_ehp_02/helpdata/en/25/283c804f7811d18a150000e816ae6e/frameset.htm
Customer Contracts
http://help.sap.com/erp2005_ehp_02/helpdata/en/dd/55fd53545a11d1a7020000e829fd11/frameset.htm
Purchase Contract
http://help.sap.com/erp2005_ehp_02/helpdata/en/70/23c6ce419311d2ac100000e829fbfe/frameset.htm
Contract Settlement & Billing
http://help.sap.com/erp2005_ehp_02/helpdata/en/ea/00efa6f94011d2968c006094b92c6a/frameset.htm
====
Service Contract
http://help.sap.com/saphelp_sm40/helpdata/en/8f/b4113a7e31e403e10000000a11402f/frameset.htm
Processing Service Contract
http://help.sap.com/saphelp_46c/helpdata/en/e6/4a8f849e0311d189b70000e829fbbd/content.htm
Service Order Processing
http://help.sap.com/saphelp_crm40/helpdata/en/81/78963ec975667fe10000000a114084/content.htm
Sub Contracting Cycle
(1) You have a material that can be procured externally, and you have maintained BOM with components. Any waste generated and received during subcontracting process can be maintained as component with negative quantity.
(2) You create a subcontracting PO (PO with Item Category L). You can also maintain Purchase Info Record for Subcontract category for material and subcontractor.
(3) You make a transfer posting to issue components for SC PO. Material is sent to subcontractor. As material remains under your ownership, system does not make any value entry. But quantity is shown as "Material Provided to Vendor"
(4) You receive finished material against SC-PO. You also specify components consumed in manufacturing of finished goods. Additionally, if you have negative components in BOM, now you'll also receive subcontracting by-products. There are three events, so three accounting entries are generated:
DR FG Stock/ SC By-Product Stock
CR Change in Stock (FG/ SC By-Product )
(for finished goods received)
DR Subcontracting Charges
CR GR/IR Clg
(for moneys payable to Subcontractor)
DR Consumption (Components)
CR Change in Stock (FG/ SC By-Product )
(material provided to Vendor is now charged to expense)
(5) You do the IV for SC Invoice, and the process is complete.
Process of Subcontract in MM
Sub-contract business process:
You want to buy material from the supplier (processed material/ assembled item) , but for some reason (quality of certain item / price ) you will give some component to vendor .
Vendor shall process the item / use the item provided & supply the final item.
SAP process:
1.Create the finished goods material code.
2.Maintain the BOM for the material.
3.Create PO with item category as "L" .
4.Issue material to vendor with movement type 541
5.Receive the material against the PO with movement type 101.
6.MIRO to account for vendor's invoice for the service charge& material used by him.
Can anybody tell me how a process has to be given to subcontracting?
Suppose, I have 3 operations 1)weaving 2)dyeing 3)cutting & packing
if no 2 process (i.e Dyeing) has to be given to subcontracting, what process should i follow ?
The following process to be followed for subcontracting.
1. Item code(material master) to be created at the stage of before dyeing.
2. Item code(material master) to be created after Dyeing as subcontracted item.(F30)
3. Bill of material to becreated for the material(2) calling for material(1)
4. Inforecord and source list to be created for material(2) with the corresponding vendor
5. PO to be released for material (2)
6.Along with PO the material(1) to be issued to vendor
7.On receipt of material when GR is made the stock with vendor will get updated.
How to Create a Subcontract Order?
To create a subcontract order, proceed as follows:
Enter the material you want to order and the item category for subcontracting (L) in the order item.
Press ENTER to display the screen for component processing.
Enter the components that the vendor requires to manufacture the product.
Please note:
You do not need to enter the date required for the components. This date is proposed by the system when you press ENTER.
It is calculated as follows:
Delivery date of the item - Planned delivery time
If you do not want the quantity of the components to be changed if the order quantity of the end product is altered, set the indicator Fixed quantity (column F).
You can determine whether the components are available on the date required by selecting Edit -> Availability check.
If you entered a bill of material as the material in the subcontract order, the components are created automatically.
If you want to determine the components in the bill of material at a later date (for example, if the bill of material is subsequently changed), choose Item -> Component -> New BOM explosion. The existing components are deleted and redetermined in the bill of material.
Save the purchase order.
When you print the purchase order, the components are printed per order item.
====
Scheduleing AGreements
Creating Schedule Agreements
http://help.sap.com/erp2005_ehp_02/helpdata/en/75/ee0f8155c811d189900000e8322d00/frameset.htm
Controling Scheduling Agrement
http://help.sap.com/erp2005_ehp_02/helpdata/en/93/7439ee546011d1a7020000e829fd11/frameset.htm
Example Data
http://help.sap.com/erp2005_ehp_02/helpdata/en/8a/815cc3b36211d188e70000e8216438/frameset.htm
Mass Maintenance of Scheduleing Agreements
http://help.sap.com/erp2005_ehp_02/helpdata/en/1a/8b4bbecdd74536acd4e970faaf6e2d/frameset.htm
Initial Data Transfer
http://help.sap.com/erp2005_ehp_02/helpdata/en/49/87c646f4a311d1955100a0c9306667/frameset.htm
Analysis & Copying of Scheduling Agreements
http://help.sap.com/erp2005_ehp_02/helpdata/en/45/f9a69036035f4be10000000a114a6b/frameset.htm
Processing Scheduling Agrements
http://help.sap.com/erp2005_ehp_02/helpdata/en/bd/1850f298a911d194fc00a0c9306667/frameset.htm
Scheduling Agreements for Suppliers
http://help.sap.com/erp2005_ehp_02/helpdata/en/93/743962546011d1a7020000e829fd11/frameset.htm
====
Credit Memo
Credit Memo
http://help.sap.com/erp2005_ehp_02/helpdata/en/a8/b99890452b11d189430000e829fbbd/frameset.htm
Creating Credit Memo / Debit Memo
http://help.sap.com/erp2005_ehp_02/helpdata/en/dd/561076545a11d1a7020000e829fd11/frameset.htm
Creating Credit Memo / Debit Memo Requests
http://help.sap.com/erp2005_ehp_02/helpdata/en/dd/55fed1545a11d1a7020000e829fd11/frameset.htm
Credit & Debit Memos
http://help.sap.com/erp2005_ehp_02/helpdata/en/a2/40418a496e11d3b3850008c719be0f/frameset.htm
Processing Credit Memo : Example
http://help.sap.com/erp2005_ehp_02/helpdata/en/4e/b3c399a1f711d194e700a0c9306794/frameset.htm
===
Debit Memo : http://help.sap.com/erp2005_ehp_02/helpdata/en/8d/a4b3880bc4c441905801d5025a5600/frameset.htm
====
Return process
You need to receipt the rejected goods through SD Module (VA01 - Sales Order type RE).
The steps are as follows :
1. Create a return request. (Using Sales Order in SD)
2. Create outbound delivery according to return request.
3. If the setting is correct in the outbound delivery screen SAP will automatically switch post goods issue button into post goods receipt. The setting is in sales order item category and delivery type.
4. In the standard system the movement type used is 651.
5. After post goods issues receipt is done using outbound delivery, the quantity is placed in blocked stock without value updating.
6. You will then decide if the return quantity are indeed bad stock or not.
7. Transfer Posting from block stock to unrestricted stock (mvt type 453), this will have accounting effect (Debit Inventory, Credit COGS)
8. Goods Issue to scrap account how to create new titles which can be used in creating the "address" view on the Vendor master.{T-Code: XK01}
In config go to Basis Components --> basis services --> Address Management --> Maintain title texts
Order type (RE)
Returns (RE) (VA01) Order will be placed as a return type order
 PGR (VL02N) post goods receipt
 Billing (VF01) --> Credit Memo is Raised
Accounting (VF02) --> Credit memo is passed to Accounting tables
===
Calcelling Invoice.
VF11 --> PGI (VL09N)
===
====
Reward if USeful
Thanx & regrads.
Naren..

Billing Document Currency

Hi Fellow members,
Facing one business scenario, Where one of our top Customer will place a single sales order(Example of Quantities: 100,150,300) & they need different currencies at line item wise(Due to billing partner/Payer can be from different countries) i.e. for Quantity: 100 currency should be: USD, for 150 it should be: EUR & for 300: HKD (HongKong Dollor).
For these 3 line items, Billing document will be different so the Billing Document currency should be only the Line item currency.
Need to know that, How we can copy the line item currency from sales order to the billing document as my Sales document currency can be differ from line item currency.
Waiting for prompt reply.
Thanks in advance.

Hello Ashish,
I believe in the Sales Area Data - Sales Tab of Payer Partner you can enter Currency.
Now since currency & Payer will be different for each line item of the Sales Order, the Invoice will be split and you will have individual Billing Document for each Payer (& currency).
By the way, what will be the destination countries (Delivery location) of each of these line Items? I feel since the payer are paying in different currencies, probably the Destination countries are also different and you may also have Delivery split.
Thanks,
Jignesh Mehta

How can the exchange rate of a sales document can be added in PA report?

Hi!!!!!!!!!!!!!
The main issue, is that I have to add the ammount of the sales document in the "sales document currency" , I already have it in local currency, so I was trying to add the exchange rate and create a fomula it in the form in order to get the information.
Do somebody knows if it has to be created as a characteristic or value fied? How do I know if it has to be created an enhancement?
Thanks!!!!!

Hi
As far as my knowledge goes, you cant add the exchange rate of the sales order to your COPA report
Whatever currency is posted in your FI, only that currency can come into COPA plus your op concern currency...
If it is so imperative in your case to report the transaction currency, You can, may be, think of creating one custom char (for Currency Code USD or INR, etc) and one value field and you can update them using user exit in COPA (COPA000*)... In this VF and Char, you can update, say 100 as the value and USD as the currency...
Or may be wait for other suggestions from group members
Regards
Ajay

Condition currency & document currency

Hi experts,
Any reports to capture condition currency & document currency against sales orders at the same time? If not, at least to capture condition currency against sales orders?
For VA05, only document currency can be showed while condition currency keeps blank, even condition records are applied. Why?

Cathy try this,
Check in KONV and KONP there is field for currency which is relevant for conditions.
The link between KONV and KONP is as follows :
Vbrk / vbak - KNUMV will give you the link to KONV. This is
obviously
the condition record details from the document.
On KONV, each record contains the link to the originating KONP record.
KONP is the condition master record table ie. When you create a
condition record for pricing, the header details are stored on Axxx and
the pricing details are stored on KONP. The link between KONV (the
document's pricing) and KONP (the pricing master record) is KONV-KNUM
H.
Ie. KONV-KNUMH = KONP-KNUMH. The relevant Axxx table also
holds the
KNUMH number and this is the link between the Axxx table and
the
KONP-KNUMH record.
I am not sure whether this is what you want, please let me know if u got the answer.
You can do it by creating Query.
Thanks,
Raja

How to configure a new third party sales document type?

Hi SAP SD gurus,
I am new to the SAP world, I need your help in configuring a new third party sales document type for a site.
There are existing third party document types being used in the region, but the client wants an entirely new third party document type that is activated for CREDIT MANAGEMENT.
I just need your inputs, as how to go about it. If I copy from an existing third party sales doc. What additional steps do I need to follow? Like Item category config, copy control settings, and credit management.
Is there a need to create new billing types?
Also as per process, by creating a new document type, how will it affect the logistic processes, if any?
Thanks a lot in advance for your valuable inputs.

Hello,
You can create new document type under following customization path
SPRO>>Sales and Distribution>>Sales>>Sales Documents>>Define Sales Document Types
Now create new document type by copying the standard document type OR
Now go to
SPRO>>Sales and Distribution>>Sales>>Sales Documents>>Sales Document Item>>Define Item Categories
which is already defined for third party sales (TAS)
Now assign this iteme category to your new document type
SPRO>>Sales and Distribution>>Sales>>Sales Documents>>Sales Document Item>>Assign Item Categories
Assignment needs to be done in combination of sales document type and item category group (BANS)
Now
SPRO>>Sales and Distribution>>Sales>>Sales Documents>>Schedule Lines
Assignment of schedule line is already done as you are using the standard one.
Lastly, you may need to maintain copy control for your newly created sales document type for this go to
SPRO>>Sales and Distribution>>Sales>>Maintain Copy Control for Sales Documents
(Copying Control: Sales Document to Sales Document)
Here you can define copy control requirements.
BR,
Tushar

Defaulting Document Currency in Sales Documents

Similar Messages

Maybe you are looking for