Define Time Units - cProjects 4.0

I have defined two time units in cProjects - Hours and Days. I have set the unit of measurement for time as 'Hours' in my project type.
When I set the unit of Task Work or Required Capacity as 'Days', I see the system converting a day for 24 hours under Evaluations.
Is there a way I can change this such that 1 day is equal to 8 hours, say??
Thanks and Regards...

Time recording in cProjects is a new feature effective version 4.0.
cProjects 4.0 is released only for ECC 6.0, CRM 5.0 and Netweaver 2004S. For customers having lower version, consultation is available from SAP. Please kindly refer to the note 900310. I hope this helps.

Similar Messages

  • Can we configure the new time unit in invoicing plan in OM7R

    SAP has provided the four time units in Define Rules for Date Determination (OM7R) which are 1- Day, 2-Week, 3-Month and 4-Year, I wanted to have the new time unit like "Quarterly" and "Half Yearly".
    Would somebody guide me on this how to get these new value?

    Hi ,
            As per SAP standard there should be 4 units ,.....Time unit  Day ,Week ,Month & Year..........................we cannot maintain other units..
    Thanx.........

  • Error "  is not a time unit" while updating table that is Copy of CATSDB

    Hi,
    We have created a new table which is a copy of CATSDB and has some more Fields in it. While inserting records to the table, it is throwing the error saying "  is not a time unit". Can you please provide some info on this ?
    This is a complete custom Table that reuses all the Includes of CATSDB table and some more columns.
    Regards,
    Srikanth.

    Thanks for the Inputs. The issue was I do not have access to update these tables. Now I got it. Thank you.
    Regards,
    Chiranjeevi.

  • Cfchart time units in y-axis

    Hi All. Does anyone know how can display time units is the
    y-axis in the format of hh:mm:ss? Also I'd like to show pace units
    -- for example 10m 30s/mile -- in the y-axis also. This is for a
    fitness website and I've been using webcharts3d designer to try to
    create my own custom style with little success. Any advice or help
    would be appreciated.
    Thanks in advance!

    Are you sure you mean the y-axis and not the x-axis?

  • Defining Time in select query.

    hi ,
    In BSAK table i dont have time field defined but in my RFC i need to fetch the data based on time and date.
    can any one let me know how can i define time field in the existing query ..
    i am using the below query.
    SELECT lifnr
             xblnr
             bldat
        FROM bsak
        INTO TABLE i_reversal2
         FOR ALL ENTRIES IN i_an_ven
       WHERE lifnr = i_an_ven-lifnr
         AND BUDAT >= date_in
         AND cputm >= time_in
         AND augbl <> ' '.
    thanks,

    sorry correction below.
    SELECT lifnr
             xblnr
             bldat
        FROM bsak
        INTO TABLE i_reversal2
         FOR ALL ENTRIES IN i_an_ven
       WHERE lifnr = i_an_ven-lifnr
         AND BUDAT >= date_in    
         AND augbl <> ' '.
    thanks,

  • Time Unit of Measure for CATS

    Hello guys
    In the table CATSDB I find in the field MEINH, "CUR" value, instead of (as I have always found on other projects) u201CHu201D (hours); and I cannot change it.
    So in the report CATS_DA, I see u201CCURu201D and not u201CHu201D.
    Can you tell me how can I change it?   What was the transaction that charged / changed it?
    Thanks
    Salvo50

    Greetings Salvatore,
    Have you gotten around that issue?
    I've created a unit G which was identical to "Hour" except the commercial unit, technical unit, ISO code and description. Now this unit was somehow populated into the CAT2 records. I can't change this in CAT2 detail screen.
    After I removed the unit G, I would not be able to save CATS, because of an error:
    Error message BM302 - Unit *** is not created in language EN
    or
    Error message BM305 - Unit G is not created in language EN
    After I re-created G as a no-dimension unit, I would get an error when trying to amend CATS
    "Unit is not allowed" or "Units with different dimensions can't be converted".
    I amended some of the entries in CAT2 manuallysetting G again as a time unit, but not all of them. Is there a report or transaction to change the unit on existing records en masse? How did you resolve this?
    Is it a known issue for the fuction module CATS_GET_UNIT_HOUR to pick up the first unit with the dimension "TIME" from T006?

  • PK07 AC: Average consumption per time unit

    Dear guru ,
    in Kanban Calculation (PK07) with this below formula how the system determine the AC
    Average consumption per time unit ?
    6.quantity per kanban i*
    Quantity per kanban = RT * AC
    SF
    AK - C
    7.
    NK: Number of kanbans
    CONT: Quantity per kanban
    RT: Replenishment lead time per kanban
    AC: Average consumption per time unit (from dep.reqmts)
    SF: Safety factor (proposed value 1)
    C: Constant (proposed value 1)
    Thanks.

    Not answered.

  • How can I calculate the waveform integral in a defined time interval?

    Hi:
    I need your help. How can I calculate the waveform integral in a defined time interval? For example: from "0" to "2pi"?!
    Thanks.

    Hello Clecio,
    You might want to try the Integral x(t) VI.  The documentation for this VI notes:
    Performs the discrete integration of the sampled signal X. Integral x(t) calculates a definite integral. The value of the output array at any value x is the area under the curve of the input array between 0 and x.
    You would pass the samples of the waveform that fall between your particular window, then pass 1/number of samples for the d(t) parameter.
    Hope that helps.
    Wendy L
    LabWindows/CVI Developer Newsletter - ni.com/cvinews

  • Short dump will happen because duration time unit is wrong.

    Hello,
    I maintained breakdown duration time unit as "TST" which is created in CUNI. System can not convert it to "S", so system will dump when I tried to access this maintenance order. So I want to change this time unit "TST" to "S" or "h". I tried to make this change in SE16 table VIQMEL, but failed. Could anybody tell me how to make this change?
    Thank you.

    Dear Stephen,
    have you changed all unit measurement? VIQMEL is table for notification header and you said that you cannot access maintenance order. so, i think you should check table AUFK, AFKO and also AFIH. for unit measurement in order
    Rgds
    Edited by: Johan Lief on Apr 27, 2010 5:49 AM

  • Logistics InfoSys: Time unit field DFZEH

    Hello,
    In infostructures S021, S022, S023 and S024 the time unit field DFZEH is set to DAY as SAP standard.
    In IMG tc MCRG it seems to be possible to change this time unit which should be useful for short lead times and execution times(field MCPPCUST-DFZEH). Coincidence that field names are the same?
    After running statistical update of S023 the unit is still DAY.
    I don't see anything in the front end standard analysis that it is possible to change time unit. (This is possible for currency.)
    I have tried different options but nothing gives me a result that I expect.
    Does somebody know the effects of this IMG setting??
    Thank you!
    Best regards,
    Tor Holter
    Oslo, Norway

    In LIS there are fields available for the exact times but those fields are not present in the standard Inforstructure. The solution is to create new ones (it is not possible to copy certain infostructure).
    These fields are part of BW/BI extract.

  • Time Conversion - DataSource to User Defined Time Char w/Ref

    Hi, I have a Transformation into a DSO and i have created User Defined Time Char w/Ref.
    ZSSDCALW     0CALWEEK     Sched Ship Yr / Week
    ZSSDCALM     0CALMONTH     Sched Ship Yr / Mon
    ZSSDCALM2     0CALMONTH2     Sched Ship Month
    ZSSDCALY     0CALYEAR     Sched Ship Year
    ZSSDCALQ     0CALQUARTER     Sched Ship Yr / Qtr
    ZSSDCALQ1     0CALQUART1     Sched Ship Quarter
    The source of these fields is not an InfoObject for an InfoObject to InfoObject assignment.  The source of these fields is a date field zzschedate from 2LIS_11_VAITM and are currently set to direct assignment.
    In the Transformation assignment only the 1st 2 new fields (ZSSDCALW and ZSSDCALM) show up with the Conversion Exit PERI6.  The others do not show a conversion exit being assigned.  Note: I read something about Function RST_TOBJ_TO_DERIVED_TOBJ, but not sure if this comes into the equation automatically.
    Questions:
    Can I directly assign the date field into all of these user-defined characteristics and conversion will automatically take place?
    Or will it do it incorrectly because they are user defined date fields with reference?

    I just wrote the routines in ABAP to finalize this question

  • Why am I unable to edit by Audio Time Units? I am pulling my hair out here.

    I am attempting to do a little project and it is making me insane because even though Show Audio Time Units is checked, I am unable to do so. I can only edit by film frames. This seems like complete madness. I have never had this happen before and so I am unable to sync the sound. This is crucial since I shot with a super8 and need to fix the rubber lips.
    Is there some crazy rare bug that can cause this? I'm all ears. CS5 Premiere Pro.
    I have both an MPEG2 file at 29.97 (backup reference video shpot digitally) and a super8 transfer in 1080p at 29.97 (originally shot at 18fps and provided as a 29.97 fps AVI). Audio is a stereo wave file.
    Previous projects like this were cake. So I'm going insane here.

    Ive got the same problem, and i'm turning mad as well! PLEASE HELP! I want a smoother edit. Instead of sliding frame by frame. Thank you, so much!

  • Premiere Pro CC Feature Request: add multiple Markers at defined times

    I'm about to post a feature request and wanted to check to see if anyone else was interested, as I've read that forum support can help to get feature requests added - and also just in case this feature already exists, and I've missed it in my Googling...!
    Here's the request:
    Brief title for your desired feature:
    Option to add multiple Markers to a timeline at defined times
    How would you like the feature to work?
    It would be great to have an option in the Markers drop-down menu or to be able to right-click on the Marker icon in the timeline and be able to choose "Add Multiple Markers at xxx minutes/seconds/frames".
    Why is this feature important to you?
    I often end up creating a lot of montages, and it would be great to be able to use this feature to drop a Marker (for example) every three seconds in my timeline so that I can then add a bundle of clips using Automate to Sequence. At the moment, I do this by clicking on the Playhead Position hot text and typing in 00:03, 00:06, 00:09, etc, and dropping a Marker at each point, and this feature would speed things up a bit. I've also been asked by students if this feature is available as well.
    If anyone else would be interested in this request, please let me know...!
    Thanks

    Yes, that's true, when using my method described above, Prem adds each clip from the first frame and cuts it off when it reaches the next Marker, then I use the Slip tool to get them to the bit I like. I'd just like to remove the step of typing the time into the Playhead Position counter by dropping Markers at set intervals or by choosing to use the first xx seconds in the Automate to Sequence dialogue. Either way, the request is in now, but it doesn't look like it'll gain a lot of traction...!
    Cheers for the responses, Jim.

  • Read counter at well defined time intervals

    Hardware : PCI-6224 & PCI-6723
    Software : DAQmx & Labview
    1) I connect an external device that generates TTL pulses to one of the board counters.
    2) I want to know how many pulses were generated between 2 reads of the counter.
    I can do that so far.
    3) BUT it is very important to read the counter at a precise frequency, in other words with a hardware clock.
    I tried to create a virtual channel using counter1 and the "DAQmx
    timing sample clock" with the card 20MHz timebase as the source to
    trigger every read of the counter. The read function is in a while loop.
    But it doesn't work. I am stuck at this point.
    Thanks for help.

    A simple solution is to put a pulse train out of one counter at some known frequency, the period on this pulse train will be time each TTL in will be integrated (counted) from.  Lets say this is 10KHz so each bin of TTL counts will be 100us.  On a second counter set the counter to count TTLs on the source pin corresponding to the TTL in line and have it count in buffered event counting mode from rising edge of the gate to rising edge of the gate.  Now you should set the out pfi of the pulse of the pulse train to the gate pfi of the buffered event counter.  You should be able to count events (TTL edges) on a well defined time period.  I have done this with a 6602 in both traditional and daqMX labview code.  One warning in daqMX mode the default is to filter out 0 events, so if there are times where no TTLs arrive on the source line, and this is a valid case, make this setting false.  I am not infront of LV right now so I cant give you any code or exact function names but hopefully you can follow the general architecture.  Good luck,
    Paul
    Paul Falkenstein
    Coleman Technologies Inc.
    CLA, CPI, AIA-Vision
    Labview 4.0- 2013, RT, Vision, FPGA

  • BEx Trace Tool (RSTT) - Time units?

    Hello Everyone,
    I have researched SAP documentation on BEx Trace tool.  But I have the following question, which is the time unit for the recorded trace
    When I execute the trace there is also another time that appears, what is the unit for this and how it is different from the one in the recorded trace.
    Thanks in advance for any help provided.

    HI,
    REFER BELOW THREAD
    [http://help.sap.com/saphelp_nw04s/helpdata/en/a4/1be541f321c717e10000000a155106/content.htm]
    tHANKS

Maybe you are looking for

  • Mail app flashes open but closes immediately

    Every time I try to open my Mail app it flashes open but then closes right away. When I go into Settings > Mail it says "ACCOUNTS ARE CURRENTLY SYNCING." -- but I don't show anywhere that it is syncing to my iPad. Any suggestions??

  • As a dollar soot one for her from

    As a dollar soot one for her from okay I'm a want us to get out that went grocery shopping with my husband and he saw the elf display and he was like Oh you like Alcoa its out stuff and no it's got into him is writer on my birthday so picked up L fla

  • Aperture 3 trial version hangs and quits

    I downloaded a trial version of Aperture 3 to try it out since I liked the added features. I currently use iPhoto. Everything went fine until I did the iPhoto import. Now, every time I start Aperture, it either hangs and becomes unresponsive, or quit

  • Type of requisition that don't raise commitment

    Hi Gurus, Which type of requisition (purchase, framework etc) do not raise commitment in CO? Thanks for your help Regards, Catherine

  • Stack OverFlow Problem with QuickSort Partition, please help.

    I have a Quicksort method that keeps running into a Stack OverFlow error when it attempts to partition. Here are my methods: public static void quickSort(int[] a){           int from = 0;           int to = a.length - 1;           sort(a, from, to);