Define User/Group for an SMB share being mounted!

Ave,
Mac OS X 10.3.9 had a very easy way of defining UID & GID of a share being mounted on a mount point, to define an Owner of the content.
mount_smbfs -u 70 -g 70 //usr:pwd@ip/share SharePoint
This would make Apache Web Server the User/Group for the mounted share, and this way PHP could access the files on the mounted share with no problems.
Leopard has elimited that -u & -g arguments to mount_smbfs, and I can't for the life of me figure out how to define User/Group on a share being mounted.
Any clues?

sudo -u www mount_smbfs -f 0777 -d 0777 //usr:pwd@ip/share node fixed it!

Similar Messages

  • No provisioning of User Group for authorization field in user master

    We are implementing CUP 5.3 workflows. Both in manual proviosing and automated provisioning based on User Defaults the user group gets only provisioned to the Groups tab in SU01. The field User Group for authorization on the Logon data tab remains empty (field CLASS from system table USLOGOND, filling CLASS field in table USR02).
    In User defaults both under user default as on the user group tab the user groups have been defined. In manual provisioning the correct list of user groups get displayed for selection.
    Under field mapping in the Application field I only find User Group in user master maintenance, but not User group for authorization. However I would assume I do not need to use field mapping, as I want to automate this provisioning based on user defaults.
    Am I missing a configuration setting here? If so, where can I set it?
    I would assume the provisioning of this field is possible. RAR reports the user group also based on the User group for auhtorization and not from the Groups tab.

    S.Pados,
    I can assure you that what I said in my last response does provision the User Group For Authorization Check on the Logon Data tab; in fact, I was having the opposite issue where the Group tab was not being provisioned; however, I am ruunning AE 5.2 and you said you are running 5.3; maybe something did change or got lost in the releases; it probably is good to see what SAP has to say about this; I would hate to lose this capapbility when I upgrade to AE 5.3
    As far as using the custom field for multiple applications, would that field not be usable for any of the applications you would select in the request form?; if you are using the same table names in the different SAP systems (selectable by the application field on the request) would the drop down selections be whatever the table has defined for that system? I may not be understanding something here so I am just asking;
    It would be great to have a Group field automatically filled in by another selection to avoid the user involvement; I agree with you there; because of our concerns on users entering the AE request, our shop has decided to continue with the users submitting the request through normal email and the security administrators perform the AE entering; this way we have a better idea on something like the GROUP field; we have an option to include the original email as an attachment for justification of the request
    Sorry I could not be of more help
    Jerry
    Ryerson,Inc.

  • How to create a valid database User/Group for installing Linux 5,3

    HI:
    I am trying to install E-Business Suite on LINUX and gave me the following error report
    Unable to validate Database User/Group :oralce /dba
    Provide a valid Database User/Group for the installation.
    when I was installiing on Windows, it did not gave me this error.
    How do I have to crate a user/Group to install eBusiness on my Linux/
    Please help
    Ali

    Hi user;
    hi Ali;
    Yes I run as a root userKeep using root
    When I use the following at the terminal
    It gave me a error message
    " Provide a valid Database User/Group for the installation. "
    Here is what I type at the terminalIts seems normal becouse u try to create same user!
    root@vis groupadd dba
    root@vis useradd -g dba -d /home/oracle vis
    root@vis useradd -g dba -d /home/oracle oracle Try this plz:
    groupadd dba << i think this group already created!
    useradd -g dba -d /home/applmgr applmgr << for apps node
    useradd -g dba -d /home/oramgr oramgr << for db node
    As you notice we define 2 different user under /home path!
    Regards
    helios

  • How to add a default user group for multiple document type's?

    Hi,
    I am trying to add same default user group for different document types when MA is created. Is there any way to setup using a single "Document Security Template"? Or I need to create different templates for different document types?
    Please confirm.
    Thanks,
    Saloni

    Hi Saloni,
    Based on what your specific requirement, it might be easier to do it with scripting.
    If you are doing it using Document Security Templates, you would have to create a Document Security Template for each of the 6 MA types and assign the default group. Create another one and leave the Document Type field blank, so it will apply to the other 4 MA types that don't have a default group.
    Regards,
    Vikram

  • Customer fields do not display in Define Field Groups for Cust. Fields IMG

    I am customizing to display cusotmer fields in cporjects IMG actviity 'Define Field Groups for Customer Fields'.
    I am able to see the main tab in object category and multiple sub tabs in it. However customer fields that have been added by Enhance database tables in DPO are not shown or visible in the sub tabs.
    Am I missing any config? Please let me know.
    Senthil

    Hi Senthil,
    If you can see the tabs and not the fields, pl check if you have covered field control for these newly created custom fields.
    To have field control for these fields, you will have to copy the standard SAP provided field control, include the structure that has you custom fields and give it authorizations etc as per your requirement.
    Pl read carefully the documentation provided with field control.
    Refer note 947963 - Setting up field control
    Regards,
    Reema.

  • Security permission to user Group for menuitem in ax 2012

    Hi experts,I have a query,
    Query is that i want to give menu item level permission to user group,for e.g i want to show accounts Payable
    all set up parameter to Finance Group,so how it can be done? i don't want to use Roles--->Duties------->Privileges method,
    I want to just create two groups for one ACount Payable set up parameters will be showed on main ,and for
    other group it was disable?
    is that possible with out creating new roles ,duties and then privileges procedure?

    Hi Munsifuv. You might get more help on this and your other AX questions on an AX-specific forum. We can help with connecting Power Query to data sources, but aren't necessarily experts on configuring those sources.
    Thanks,
    Ehren

  • How to create user group for EIS (Executive Information System) KCBA

    Dear Experts,
    How to create user group for EIS (Executive Information System)
    TCode KCBA
    Regards
    Saurabh

    Hi ,
    Check the below link ,hope it will give some inputs for creating groups.
    http://help.sap.com/saphelp_470/helpdata/en/5c/c1c81c445f11d189f00000e81ddfac/content.htm
    Regards
    udayakumar.k

  • Error in eRecruitment configuration step Define user list for support teams

    Hi Erecruitment experts,
    I am new to SAP Erecruitment and trying to get the system running in ERP 6.00 with EP7.
    When I progress the customising steps under technical settings -->User administration --> Define user list for support teams, I am facing problem of ABAP Dump.
    It says
    Error in the ABAP Application Program
    The current ABAP program "SAPLHR_RCF_CUST_01" had to be terminated because it
    has come across a statement that unfortunately cannot be executed.
    Key words are
    "MESSAGE_TYPE_UNKNOWN" " "
    "SAPLHR_RCF_CUST_01" or "RCF_CUST_F01"
    "CHECK_VALID_USR"
    I think there is a link between Object types CP, BP and relation ships A650, A209 etc in this process.
    Can some one guide me how to overcome this error.
    Tks
    Dhina

    Hi all
    I got them fixed, as they are due to BP creation integration issue.
    Thanks and regards
    Dhina

  • Define Account Grouping for Movement Types??

    hi
    In account determination the setting in transaction  OMWM - Define Account Grouping for Movement Types
    The above transaction needs any setting or its standard SAP settings??
    Can somebody explain me about this transaction in detail.
    Thanks

    OMWM is to decide account determination should happen via valuation grouping code or not. SAP standard is with valuation grouping code. I had never seen singe time anywhere it is deactivated.
    Account grouping for movemement you can see in OMJJ. (Inside movement type left side). It is also predefined by SAP. You see only account modifier and check acct. assignment is editable. Others cannot be edited.
    In case for same transaction if you want 2 different GL account needs to be triggered for same material in same plant, we copy a movemen type and create a new and assign a different account modifier.
    Then in OBYC against it we will maintain different GL account.
    Hope you are clear
    Regards
    Antony

  • Users group for View not for publish

    Hi guys,
    Does anybody can tell me how can I creat users group for view
    and not for publication?
    It's something like to create Contribute roles, but is not
    related with the permission levels to publish, but with the
    visualization permissions for exclusivy content, for ex.:
    Home (open for all users)-------- IT Dept--------Directory
    Dept ---------Support Dept
    - Johny - Johny - Joseph - Isaac
    - Jack - Jack - JJ - Jason
    - Rose - Rose - Robert
    - Joseph - Lisa
    - JJ
    - Isaac
    - Jason
    - Robert
    - Lisa
    Please somebody help me, It's very, very important!!!
    Thanks in advance for who can help me.
    San.

    Sandra Bercke wrote:
    > Hi guys,
    > Does anybody can tell me how can I creat users group for
    view and not for
    > publication?
    > It's something like to create Contribute roles, but is
    not related with the
    > permission levels to publish, but with the visualization
    permissions for
    > exclusivy content, for ex.:
    >
    > Home (open for all users)-------- IT
    Dept--------Directory Dept
    > ---------Support Dept
    > - Johny - Johny - Joseph
    > - Isaac
    > - Jack - Jack - JJ
    > - Jason
    > - Rose - Rose
    > - Robert
    > - Joseph
    > - Lisa
    > - JJ
    > - Isaac
    > - Jason
    > - Robert
    > - Lisa
    >
    > Please somebody help me, It's very, very important!!!
    >
    > Thanks in advance for who can help me.
    >
    > San.
    >
    You cannot restrict on the users to view a particular folder
    (say IT
    dept) using contribute. Infact there is a setting in IIS
    Webserver which
    allows you to set an Authentication mechanism where users
    when browsed
    to any site on your webserver will be prompted for username
    and password.
    But you might want to try something like this.. not sure if
    this will
    help you...
    1. Create 4 connections in contribute
    a) first connection to "Open for all users" directory on
    your webserver.
    b) second connection to "IT Department" directory on your
    webserver.
    c) third connection to "Directory dept"... etc
    2. This way you can administer 4 sites and send connection
    keys to them
    accordingly...
    Hope this helps.

  • Lion upgrade removes user/group for nagios (nrpe)

    FYI:
    Maybe this'll help someone else. I run nrpe/nagios on a couple of my Macs. Upgrading to Lion from SL the upgrade installer removed the user/group for nrpe. On reboot, launchd could not start the process because getpwnam("nagios") failed. The error was repeatedly reported to system.log (Macintosh com.apple.launchd[1] (org.nagios.nrpe[18251]): getpwnam("nagios") failed) causing launchd to use excessive CPU and battery. Recreating the user/group allows the process to start, which allowed launchd to return to normal CPU levels. Also maybe helpful is that when I turned networking off launchd stoped reporting the error which caused the symptoms to stop (which sent me down a fruitless path).
    This error occurred on both a MBP and a Mac Mini. I've reported in via feedback.
    Thanks for listening... Mark

    I have a similar problem - I need to change my account (short) name so that I can backup both my old computer and new computer on timecapsue independently.  However, the link you provided is only for 10.6 and earlier, not for Lion.  Are the instructions for Lion similar?  For one, I have no directory utility on Lion.
    Thanks for your help.

  • User groups for Oracle Financial package

    Where can I find user groups for the Application Packages such the Financials Package? I would like to find
    information and resources.
    Thank you.
    null

    The main user group is OAUG, and then each region has its own group.
    the web site is www.oaug.com
    HTH

  • How can we provide access/provide permissions to a user/group for group of folders at single step??

    Hi Nico, Thaks you so much for your reply,, Can you please advice or give me some steps to write script pelase? Regards,Kareem

    Hi All, How can we provide access/provide permissions to a user/group for group of folders  at single step?? I can able to provide access for a single folder at a time. I want provide access to a list of  folders( more than 30 ..) at single step?? Regards,Kareem

  • Basic parameters to define the grouping for the Items and the BPs in SAPB1

    Dear Friends,
    What should be the basic parameters to define the grouping for the Items and the Business partners in SAP B1?
    What will be the case when the client wants to classify the sales revenues various categories?

    Hi
    What should be the basic parameters to define the grouping for the Items and the Business partners in SAP B1?
    For items:
    Raw Material.
    Capital Goods
    Finished Item
    Semi Finished Item.
    Conusmables
    Stationary .........etc
    or .
    Metal.
    Rubber
    Wooden.....etc
    Bsuiness Partner
    Foreign or domestic.
    Region wise e.g South,North,East,West.
    State wise  e.g MH,KT,DELHI,GOA....ETC
    What will be the case when the client wants to classify the sales revenues various categories?
    SIMILARLY
    Foreign Revenue, Doomestic Revenue, Region Wise Revenue, State wise, Or Territory wise.......etc
    I hope this clarifies you
    Ashish Gupte

  • Confusion of aliases made for two SMB shares with same folder name

    I have a SMB file server here which provides me with a Departmental personal home filestore and also a Departmental personal web filestore. The name of the folder is the same in each case - my Departmental user name. If I check the Finder Preference 'Show these items on the desktop' for 'Connected servers', I can use the Finder's 'Connect to Server' for each - smb://webhome/john and smb://home/john - to make each of them appear on my desktop as 'john'.
    It's rather confusing to have to remember that (say) the upper 'john' is my home filestore and the lower one is my web filestore, so I use Finder 'Make Alias' (e.g. via right click on each when selected') to create two aliases I can name 'web john' and 'home john'.
    Alas, each alias always points to the same (apparently randomly selected) share!
    This looks like a bug to me. I've tried unchecking the Finder 'Connected servers' preference, and then the shares appear under folder 'SHARE' - where I cannot create any aliases at all; I get the error message 'Operation could not be completed (Error -8058)'.
    Reader, do you know of a work-around which will let me distinguish on my desktop between my two identically-named folders from different shares? Alas, I have no power to change the names of the original folders.
    John A. Murdie

    +It's rather confusing to have to remember that (say) the upper 'john' is my home filestore and the lower one is my web filestore, so I use Finder 'Make Alias' (e.g. via right click on each when selected') to create two aliases I can name 'web john' and 'home john'.+
    I should have said that one cannot rename the share icons in the usual way. Not being able to do this is the real bug here. If I'd been able to do this I wouldn't have need to try to create aliases, of course.
    John A. Murdie

Maybe you are looking for