Defining User Defined Message in Adhoc SA

Hi All,
Sorry if i am posting same query.
Our is Essbase Cube as source for OBIEE Reports.
When users are trying to retrive huge set of data it thorws severe Essbase Error during Adhoc Analysis.
Can we redirect to some other page or display pop-up message like "Please apply filters for attributes" whenever that error occurs.Please assist on this.
Any help is highly appreciable,Thanks:)
Regards,
SatyaB

Satya,
If you are on 11g then make use of http://download.oracle.com/docs/cd/E21764_01/bi.1111/e10541/answersconfigset.htm#i1015965
CriteriaValidator.filterExists(sFilterTable, sFilterColumn) function will solve your problem

Similar Messages

What is Meter reading validations (System defined & User defined)

Hi Experts,
1 )How to configure Meter Readings (Technical Control Parameters, MR Control, MR Notes etc)
2) what is Meter reading validations (System defined & User defined) and how to configure it.
3) What is Register Relationships,Device Groupings & Device Allocations and how to configure.
Kindly explain with examples.
Thanks in advance.
Regards,
Shabnum

hi,
Meter Validation Steps:
1.     The Validation Process begins with Meter Reading Order Creation when the expected consumption is determined for the meter reading to be recorded for each register. The meter reading status is u201C0u201D or un-entered at this time.
2.     The meter reading is entered via an upload program as part of the batch processing or entered manually.
This result is validated or evaluated against the permitted range of allowable meter reads/consumption for that register. The expected consumption is the basis for determining the range of the minimum and maximum values for the meter reading.
If the result is plausible, or valid, for all registers of the meter, the billing order becomes billable and the contract/installation is passed to billing for further processing. The meter reading status is updated to u201C1u201D or billable.
If the meter reading is validated as implausible, the meter reading result is transferred to the List of Implausibles for further processing (EL70). The status of the meter reading is u201C2u201D or automatically blocked. One or more independent validations can be failed in this validation process.
3.     During processing, the agent can release the meter reading for billing; the status is updated to u201C4u201D, released by clerk. The reading is accepted as measured. The agent can also process the implausible meter reading result using transaction code: EL27 Execute Correct Implausible Meter Reading Results. EL27 is recommended for individual processing.
SAP Easy Access  Utility Industry  Device Management  Meter Reading  Correction of Meter Reading Results  Implausible Results (Transaction EL27)
EL70 is recommended for processing of implausibles for mass processing. It is not on the menu, however, one way to open the screen is:
SAP Easy Access  Utilities  Device Management  Meter Reading  Correction of Meter Reading Results  Implausible Results
Once the screen opens, click on the List button on the application toolbar
4.     The agent may also correct the meter reading. If this corrected read is validated as within range, the status is updated to u201C1u201D, billable.
5.     Alternatively, the reading can be determined to require follow up action and a service order is executed from the IC for re-read. A read status has been configured to support this flagging of the account for follow-up service order processing.
6.     When the service order is returned from the field, the CSR releases corrects, resets or possibly estimates the meter reading depending on the outcome of the service order processing.
7.     The meter reading is then passed to the billing engine for billing execution when the reading is validated as plausible.
-Siva

How to define user defined schema in LDAP

Hi guys,
I have created user defined fields in OIM through design console.
Could any one please help me in writing user defined schema in LDAP with the fileds created in OIM.
Thanks,
divya

Hi Divya
I'm a little confused about what you're asking. Does the custom schema already exist within your target LDAP server? Are you trying to work out how to pass custom attribute values through as part of an OIM provisioning operation? Which particular LDAP Server and Connector are you using?
Or are you perhaps asking how to actually create a user-defined schema extension within the LDAP directory? In this case, that will completely depend on which LDAP Server implementation you're using and you should probably refer to the product docs for that product.
Hope this helps
Cheers
Rob

How to define "User defined" palette in IMAQ Display?

When I select the "User defined" palette in the display, it just shows the regular grayscale palette. I want to replace this with the "Rainbow" palette but slightly modified in range. How do I do this?
Thanks!
MK
Solved!
Go to Solution.

Thanks Greg, I will try that, looks like that's the ticket!
Also, something I haven't been able to figure out yet is how to find (let LabView create?) the enumerated lists that match up to whatever port needs it (in this case "Palette Type"). i've tried wiring up a blank enum but it doesn't get filled out, where can I find them or create them (without having to make them manually?)
Thanks again

Defined User Define Type not show data in sql-query

hi.
I am define new type as
create type cust_address_ty as object
(STREET VARCHAR2(25),
CITY VARCHAR2(25),
COUNTRY VARCHAR2(25));
then insert data into new created table
when we run sql select command for * from
following error occured.
SQL> select * from fml.cust;
select * from fml.cust
ERROR at line 1:
ORA-01024: invalid datatype in OCI call
what should i do for this.
please help
thanks
Ali

ORA-00904: "ADDRESS"."CITY": invalid identifierPlease read about [url http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96594/adobjbas.htm#454850]Object Types and References -> Name Resolution -> When Table Aliases are Required in the manual.

Accessing container element in the User Defined Function

Hi All,
I am accessing a container element in the user defined function.
But it is not working. Actually i want to split a message(1800 records) into a batch of 200.
But it goes in a infinite loop.
Please can you tell me where i am wrong.
Smita
The code is :
public void SplitMsg(String[] a,ResultList result,Container container){
Object container1;
String counter;
int i,j=0;
container1 = container.getParameter("value");
if( container1 == null){
counter = "0";
else {
     counter = container.toString();
     j = Integer.valueOf(counter).intValue();
for ( i = j ; i <= j + 199 ; i++){
     if ( i >= a.length){
          container.setParameter("value","9999999");
          break;
     result.addValue(a<i>);
     j += 200;
     counter = Integer.toString(j);
     container.setParameter("value", counter);

Here is another way to accomplish what you wanted.
For the target mapping, use this sequence for mapping
Source element -> removeContext -> Your User-defined Function -> Target Element
When defining User-Defined Function, select "Cache Queue" option.
Since you are using removeContext before calling the UserDefined function, your input to the user defined function will be a String array without ResultList.CC.
Now manipulate the array the way you want it, and build the ResultList result.
After every 200 records, use method
void addContextChange().
This will insert the ResultList.CC at the appropriate places.
Use Display Queue in the Mapping Editor to see the debug values.

User-defined Attributes in CRM WebUI

Hi there,
I am using the Attribute 1 (defined in IMG->CRM->Master Data->BP->Define Attributes->Define User-Defined Attributes) to determine if a customer may or may not be given credit, just a simple yes or no attribute. My question is how to make this attribute be available when I'm creating a new BP in the WebUI under General Data?
Thanks in advance.

Hi CharlieF,
I have a trouble with the same attributes in the "Account overview", in the view "BP_HEAD/AccountDetails", when i select a value in this fields and i try to save, the system display the error message: " Field group Attribute 1 is hidden; do not enter data in corresponding fields"
Have you solved this issue?
Can you explain me how?
Thanks in advance.

Alert based on user defined query

Hi
I have defined user defined field U_Jobnumber.I need to stop /inform user if user is trying to enter the same u_Jonbnumber again .This is being done at sales order (header level)
Can you please help me to provide solution
(Points will be awarded based on solution or advice )
Thank you
Bishal

Hi Bishal,
Rather than using an alert, you could put validation code in the SBO_SP_TransactionNotification stored procedure to check for the same job number before the document is added. This is a permitted solution as SAP allow users to add their own sql code to this proc (provided it's not inserting or updating data in SBO system tables).
To set up this solution (on a test system):
1) Open SQL Studio Management
2) In the Object Explorer expand the company database, expand Programmability and Stored Procedures
3) Right-click the SBO_SP_TransactionNotification stored procedure and choose Modify. This will create an update script in the main window.
4) Look for the following section in the script:
--     ADD     YOUR     CODE     HERE
5) Underneath the above section, paste the following code:
if @OBJECT_TYPE = '17' and @TRANSACTION_TYPE in ('U', 'A')
     if exists(select DocEntry from ORDR where DocEntry <> cast(@LIST_OF_COLS_VAL_TAB_DEL as int)
                    and U_Jobnumber is not null and U_Jobnumber <> ''
                    and U_Jobnumber = (select U_Jobnumber from ORDR where DocEntry = cast(@LIST_OF_COLS_VAL_TAB_DEL as int)) )
          begin
               set @ERROR = '9999' -- Set your own error code here
               set @ERROR_MESSAGE = 'The Job Number entered has already been used on a previous sales order.'
          end
6) Click on Execute and you should get a message stating that the update was successful
7) Test adding a new sales order
The above script will raise an error when the user clicks on Add if a job number has been specified on the sales order and that number has already been used. It will not check if a job number has not been specified
Kind Regards,
Owen

Portal Entitlements for user defined objects

Hi,
The UUP aggregates the user profile information from different backed data sources.
One of the properties in the propertyset is a multivalued property. I populate
this by the following code:
PropertyMapKey propertyMapKeyM = new PropertyMapKeyImpl(null,"DA_Privilege");
String str="LAB1_CAPLinks_ViewReports" + "," + "LAB1_CAPLinks_EditReports"; //hardcoded
for testing
propertyCache.put(propertyMapKeyM,str);
(This code resides in the MyEntityPropertyManager)
When I go to the portal administration screen, I do not see the values, it instead
only gives me the object id of the java String array.
Could someone please help me with the following questions:
1. How do I populate the multivalued property ? I see in documentation that there
is 2 different PropertyCache implementation......confused which one to use and
how.
2. Is there a way to define user defined objects in UUP and have portlets entitled
to the state of the object ? (a custom entitlement code)
3. Any sample code would be helpfull
Thanks,
Uday

Thank You Greg. Now it works.
-Uday
Gregory Smith <[email protected]> wrote:
I'm not totally sure, but I would imagine you want to put a List of
Strings into the propertyCache if the property is supposed to be
multivalued text, e.g.:
PropertyMapKey propertyMapKeyM = new PropertyMapKeyImpl(null,
"DA_Privilege");
List strs = new ArrayList(2);
strs.add("LAB1_CAPLinks_ViewReports");
strs.add("LAB1_CAPLinks_EditReports");
propertyCache.put(propertyMapKeyM, strs);
I know that all of the code that calls the UUP and property sets code
expects a Collection back from a multivalued property (but I'm not sure
about a UUP implementation).
Greg
Udayraj Nair wrote:
Hi,
The UUP aggregates the user profile information from different backeddata sources.
One of the properties in the propertyset is a multivalued property.I populate
this by the following code:
PropertyMapKey propertyMapKeyM = new PropertyMapKeyImpl(null,"DA_Privilege");
String str="LAB1_CAPLinks_ViewReports" + "," + "LAB1_CAPLinks_EditReports";//hardcoded
for testing
propertyCache.put(propertyMapKeyM,str);
(This code resides in the MyEntityPropertyManager)
When I go to the portal administration screen, I do not see the values,it instead
only gives me the object id of the java String array.
Could someone please help me with the following questions:
1. How do I populate the multivalued property ? I see in documentationthat there
is 2 different PropertyCache implementation......confused which oneto use and
how.
2. Is there a way to define user defined objects in UUP and have portletsentitled
to the state of the object ? (a custom entitlement code)
3. Any sample code would be helpfull
Thanks,
Uday

Process chains Decision process user defined functions

Hi Experts,
In process chains process type decision we can define user defined functions. How to define these functions. Any help greatly appreciated. Thanks.
Best Regards,
Suresh.

I can only find out "decision between multiple alternatives'//are you looking for this?
This is used to decide b/w different options as given in its menu....
--SA

How do you use user defined error messages in Value Help?

Hi,
I'm currently working on a Modifiable Value Help Selector in Web Dynpro Java, and I want to use a user defined error message when I validate the values entered by a user. Currently, it's returning its default error message ("Character <string> does not match...").
Since the project requires a different error message, is there a way to override the default error message and use my defined error message instead?
Thanks!

Hi Angelo,
I am not sure why message area is showing both Custom and inbuilt messages but you can try the following:
i guess you must be using reportContextAttribute exception for showing Error messages on the input fields as well.in that case you can disable the message area so messages will appear only on the Context level ie; on input fields.
For other messages apart from validation messages you can enable the message area before reporting the exception.
make sure the boolean context variable which will be used for enabling and disabling the message area should have Readonly property set as true.
I am not sure whether this is the only solution for this but you can try and see if it works.
Siddharth

User defined function in java for message mapping

I wrote the following user defined function in java for message mapping and mapped vendor with this. The aim of this function is to write a error file at defined path when i send empty Vendor value from File to RFC-Function module BAPI_PO_CREATE. The "err.txt" error file is not written when i execute in TEST but the value "ERROR" is returned to destination Vendor Field.
public String validation(String a, Container container) {
//write your code here
if (a.equals("")) {
try {
String source = "Vendor cannot be empty";
char buffer[] = new char[source.length()];
source.getChars(0, source.length(), buffer, 0);
for (int i = 0; i < buffer.length; i +=2)
f0.write(buffer<i>);
f0.close();
FileWriter f1 = new FileWriter("/10.10.0.55/sapmnt/trans/edixiin/err.txt");
f1.write(buffer);
f1.close();
catch (IOException e) {}
return "ERROR";

Hi Senthil,
Check these things :
1) Whether you have permission to create a file in that directory.
2) try giving this
10.10.0.55
sapmnt
trans
edixiin
err.txt
3) Also check for permissions.
Hope this will help you.
Regards
Suraj

User defined message search on Archived messages in PI 7.31

Hello Experts,
We are using XMLDAS to archive the messages of the adapter engine into a file system.
User defined search is working fine for the messages in the database, based on the UDMS criteria, in database tab of message monitoring. And as per SAP, "Extracted attributes are archived together with the message and could be used for searching".
But for us,once the messages are archived into a file system, the UDMS criteria is not working from the archive tab in message monitor.We are able to retrieve the messages in the archive tab based on the message id and also the payload content from it but not using UDMS.
Please let us know if we need to do any specific configuration for the UDMS criteria to work on archived messages as well.
Regards,
Ram

Hello Michael,
Please check following links for configuration and re-check.
PI 7.3 – Adapter User-Defined Message Search without TREX
Configuring User-Defined Message Search - Advanced Adapter Engine - SAP Library
Also I believe you are searching for new / fresh messages after you configured UDMS. I believe it will not show up old message list prior to UDMS config.
Hope it helps
Regards,
Azhar

User-Defined Message Search - PI 7.1 - EHP1 - SP06 - Not working

Hi Friends,
Recently, we have imported SP06 in our PI system (PI 7.1 EHP1). The SXMB_MONI has now new tab "User-Defined Selection Criteria".
To implement user-defined search, I have created filer, extractor, namespace prefix for one outbound interface through transaction SXMS_LMS_CONF. (As it is explained in SAP EHP1 features PDF and the link "http://help.sap.com/saphelp_nwpi711/helpdata/en/48/c85598f63335bfe10000000a42189d/frameset.htm".
Also we have created logical port through transaction SOAMANAGER. (followed the steps as mentioned in PDF)
After filters, extractor, namespace prefix created and activated, I have checked the extractor through Test Extractor, it is working fine. (All are green, given below is the output)
Type
Message text
Processing message 4DDFE95BAEC67152E10000009958A8AB
Analyzing payload of message version 000
No filter found
Analyzing payload of message version 004
Filter found for interface name PROACT.PROACT01
Name MATERIAL_ID value RPM312AZ/11522R1 extracted
Analyzing payload of message version 005
No filter found
Analyzing payload of message version 008
No filter found
Now, when I do search the same through SXMB_MONI, by giving inputs in the new tab "User-Defined Selection Criteria", Option button "Search for all" , selected the filter name "MATERIAL_ID" in the input field:Name and put material name in the in the input field:value. (same material I put), it shows the message "No message is available for selection".
Friends, could you kindly clarify why I am unable to search through SXMB_MONI? Am I missed any of the steps?
Kindly reply.
Kind regards,
Jegathees P.

Were you able to resolve the issue ?
If not, You need to execute program SXMS_EXTRACT_MESSAGES to build index for the user defined search from the old messages.
The job bulids index from the already processed messages.
Choose the relevant Method when creating the extractor
Method
You can choose between two methods:
Extract During Message Processing
Select this method if you want the attributes to be extracted from the selected messages while these messages are processed.
Extract with External Job
Select this method if you want to extract attributes from messages that were already processed, or if you want to change the extraction of attributes from messages, from which attributes were already extracted.
For this method you need to set up and use the job SXMS_EXTRACT_MESSAGES.
thanks
VJ

Can we show some user defined message while cube loading in OBIEE

Hi All,
Currently we are building OBIEE dashboards from Essbase ASO Cube as datasource.
During Essbase Cube loading ,Essbase will "Disable all Administrative Commands".In this mean time,When users are trying to run the dashboards,OBIEE will thorws severe error.
Can we dispaly some user defined message something like "Cube is loading.Please wait...." or any other alternative.
Time taken to load the cube is 1hr.Please suggest
Thanks,
SatyaB

Yes, You can better try replacing the whole OBIEE dashboard with a custom message. Whenver the load happens...you shud trigger or set a flag value to 'Y'. Using guided navigation when Flag value is matched to Y...right a JS to replace the whole dashboard.
[html]
[head]
[script type="text/javascript"]var strStatus="@1";
if(strStatus =='Y')
location.replace('saw.dll?PortalPages&_scid=in6lPJnWWNk&PortalPath=/shared/Framework/_portal/Cube%20Status%20&Page=Cube%20Status');
[script]
[head]
Replace square bracket with curly brackets in above replace code..
BTW, you shud mark the previous post on Implicit fact. Follow https://forums.oracle.com/forums/ann.jspa?annID=939

Defining User Defined Message in Adhoc SA

Similar Messages

Maybe you are looking for