Definition could not be found - but library is there!

Hi,
I installed a library (as3isolib) in Flash Builder 4 and started writing code (following a Lee Brimelow's tutorial on www.gotoandlearn.com).
So, if I instantiate a new variable, the hint box is there with all the classes and methods and all. After inserting the line, the corresponding import line is also inserted automaticaly.
I believe this means the library has been added correctly to the project.
HOWEVER... the editor reports error messages all along the code biside all references to the library classes.
The very first error message on the code is "1172: Definition as3isolib.display.IsoView (for instance) could not be found".
I don't get it... Any ideas?
Thank you!
Marcos

Did you did an import? The library may be available for auto-complete, but I believe you still need to import whatever you will use.
If this post answers your question or helps, please mark it as such. Thanks!
http://www.stardustsystems.com
Adobe Flex Development and Support Services

Similar Messages

"file could not be found" but library location is correct

My problem has been posted before, but I cannot find a solution that has worked. My library has lived on a remote raid for months with no problems. The library location in the advanced tab is correct. The music that I have added to iTunes since March 18 is accessible, but all of my other music "could not be found." If I navigate to it and point iTunes to the correct path, it repairs the connection to the library, but I have far too much music to do this manually. Perhaps I lost connection to the raid temporarily on March 17, but the connection is fine now. Why won't the library reconnect?
I have tried closing iTunes, disconnecting from the raid, reconnecting, and starting iTunes again. I have tried re-setting the location in the advanced tab. Nothing.
Any suggestions short of deleting and rebuilding my library? I would be so appreciative if someone could help!

Did you did an import? The library may be available for auto-complete, but I believe you still need to import whatever you will use.
If this post answers your question or helps, please mark it as such. Thanks!
http://www.stardustsystems.com
Adobe Flex Development and Support Services

Error Master Type definition could not be found : FPGA

I am having similar/exact error condition as in the below post..
http://forums.ni.com/t5/LabVIEW/Error-Master-Copy-for-Type-Definition-Could-Not-Be-Found/m-p/1496866...
The *.lvbit file i am using was compiled in Labview 8.2.1 and I am now using 2009 version of Labview. Unlike the suggested solution, recompilation of *.lvbit file is ruled out due to lack of source code access.
Any help towards troubleshooting is appreciated...

Because I am a bad scientist, I do not know exactly what fixed my problem because I changed more than one variable at once.
Here's what I did:
Removed auto-populating folder from project (doubt this mattered, still broken after this)
Changed my open FPGA VI reference from using a bitfile to using a VI, selected my FPGA VI, NO MORE BROKEN RUN ARROW! YAY.
The above finding led me to go look at my FPGA bitfiles on disk -- I had two of them (weird). Usually a compilation just overwrites the older file.
Just in case the names give any insight, they are:
Older: NASATTRControlCo_FPGATarget_FPGAMain_25B3817B.lvbitx
Newer: NASATTRControlCo_FPGATarget_FPGAMain_25AF817B.lvbitx
I went back to my open FPGA VI reference, and selected the most recent bitfile that I compile this morning -- No more broken run arrow.
I have a feeling this may be due to selecting an old bitfile, but usually if the bitfile doesn't include the control, it won't show up in the read/write control node. If anyone from NI would like to comment on this I'd appreciate the insight on what may have happened.
I am wondering if it's because I installed 2010 SP 1? Who knows but it's fixed now.
CLA, LabVIEW Versions 2010-2013

When I "Get Album Artwork", iTunes always returns a result that artwork for one song could not be found; but the song is not in my library.

When I "Get Album Artwork" in iTunes 10.4.0.80 running under Windows 7, iTunes can find the missing artwork requested. But it also returns the same result, "Artwork for "Aught 7 - Mother Chorizo" could not be found. The problem is I do not have the song or any song from Aught 7 in my music library. I'm guessing this is an issue with a corrupted iTunes database. Can someone tell me how to correct this issue?
Thanks in advance.

1. delete this songs from your liblary
2. go File -> Add File to Liblary... (Ctrl+O) or File -> Add Folder to Liblary

Definition could not be found

I am getting a couple of error when I try to use a component
as a itemrender for my tile list. Both of these mxml files are in
the same folder.
I am getting the following errors.
1120 Access of undefinded property PropertyThumb
1172 Definition PropertyThumb could not be found.
<mx:TileList id="propTile" width="100%" height="100%"
allowMultipleSelection="false"
dataProvider="{propertyList}"
itemRenderer="PropertyThumb" direction="vertical">
</mx:TileList>
and here is my component PropertyThumb
<?xml version="1.0" encoding="utf-8"?>
<mx:Canvas xmlns:mx="
http://www.adobe.com/2006/mxml"
width="298" height="134">
<mx:CurrencyFormatter id="currencyFormat" precision="2"
currencySymbol="$" decimalSeparatorFrom="."
decimalSeparatorTo="." useNegativeSign="true"
useThousandsSeparator="true" alignSymbol="left"/>
<mx:Image x="10" y="10" width="121" height="111"
source="{data.pictureurl}" scaleContent="true"/>
<mx:Label x="139" y="56" text="{data.address}"/>
<mx:Label x="139" y="80" text="{data.city}"/>
<mx:Label x="139" y="103" text="{data.state}"/>
<mx:Label x="218" y="103" text="{data.zip}"/>
<mx:Label x="139" y="10" text="Price:"/>
<mx:Label x="178" y="10"
text="{currencyFormat.format(data.price)}"/>
</mx:Canvas>
Thanks,
Thomas

Do you ever get the feeling you are talking to yourself. lol
After some more testing, it seems to work fine when I put the
tilelist in the main application. I get the error when I put the
tile list in a component. The itemrenderer is a different component
itself.
Is this designed only work in the application and not a
seperate component?

Bootcamp: installer disk could not be found - but MAC desktop can see it

Hi,
I have an iMac intel - 17" 1.83 GHz that I put together from a box of junk. Mechanic friend took it all apart, don't ask. Installed a new hard drive of 1 terrabyte. The internal optical drive does not work so we got a new Iomega optical drive that works just great.
We want to run Windows XP Pro on this iMac - and after updating all of the software in Mac (OS 10.5.8), and running Bootcamp set up assistant, partitioned the drive to 500 GB MAC; 500 GB PC, got this error message saying that the Windows XP installer disk could not be found.
The disk appears on the desktop. I can click on it and see all of the pc files in it. I clicked on a couple of the files and got a simple text document of gibberish. But the set up assistant in Bootcamp still doesn't recognize the disk. So I have been unable to install Windows.
The disk itself is a burned copy from my university that gave me a full license for Windows XP Pro, SP 3. It's 32 bit. And it shows up as an install disk when I pop it into a PC.
I've run Disk Warrior and Disk Utilities to repair permissions and to check that the new hard drive is ok...and it's all set.
I wonder if this is because of the external dvd drive that I'm using. I can use my Macbook Pro and get the imac into target mode. But don't know if this will have me continue to bark up this tree.
Has anyone had success with the same kind of problem that I'm not facing? Thanks much in advance.
Sheila

I too got a version of Windows 7 64 Professional from the the Microsoft Software Distribution Network through Uni. I burnt the iso file on a PC to a DVD with power ISO and then tried to use it as the install disk. After some umming and arrhhing Mac OS X recognised it, the installer started, allowed to select language etc, then suddenly a box appears announcing that a required cd/dvd drive device driver is missing.
I have rang up apple support and they are pretty much saying it is a disc quality issue, but I have checked all the disc drive regimes and permissions and they all seem to be fine. I have also done it with multiple brands and a number of times, everytime the same message returned. All the latest firmware has been downloaded. One thing that was briefly mentioned by the guy at Apple support was that there was the possibility that it may be the "logic board". So the previous poster may be right. They said this was unlikely, but everything is possible. The drive works for everything in the OS X side though, so has pretty much stumped me and the Apple support people. I think the only option is to take it to an Apple shop and let them see it for themselves, not really an option for me as I need the Mac Book to write my dissertation, due in about three weeks so can't afford to lose it.
Sorry if I have slightly "jacked" the thread, but the issue sounded pretty close to mine. Any resolution or insight into what might be the issue would be amazing.
Regards,
Duncan

"Some of the items in the Itunes library were not copied to the [device] because they could not be found" but music play on itunes

Morning,
i got 5.6Go of music but not on the C drive, i've done a redirection to My Music Folder to "I:\My Music" instead of the default location
I can't put in on the default location i don't have enough space on my SSD.
I can play all the music i want on Itunes, when i wanna sync my iphone (the old and the new) i got this error.
It's never on the same song and a few are copied on the Iphone
I've tried re-create the itunes library, restaure the iphone from a previous backup or erase all the setting and data.
I've tried using WIFI or a different cable.
I've looked in C:\Users\momo\AppData\Roaming\Apple Computer\Logs
but didn't found any clues.
I think it might be because the disk is not reading fast enough (that's why it doesn't always stop on the same song but it's only a guess).
I'm having this issue for more than a year but now that i have a new iphone i know the issue does not come fro the iphone.
Can you give me an advice ?
Or just an itunes with a debug mode to know exactly what is wrong.
My Itunes version is 12.1.1.4 (i've tried some older version and i still have the same issue)
My last Iphone version is 8.1.2 it's an Iphone 5
The old was an Iphone 4 on IOS 5.0.1
I work in the IT so i can do some technical things.
Apologies if i don't reply quickly
Thanks

I kept having a similar problem - 3 out of the 10 videos I had on iTunes wouldn't sync. They were in the right format and I KNEW they worked on my iPod because I'd RECORDED them on my iPod. I finally figured out what to do! Go to the movies in your iTunes library. Click on one that does not sync. Click on "Advanced" at the top of iTunes and choose "Create iPod or iPhone version". Once that's finished, be sure you delete the old version so you don't keep getting the error (or have 2 copies of the same video) and sync. This should eliminate the problem. At least it did for me!

Songs cannot be found because original files could not be found, but...

I've just imported over 2,000 songs to iTunes and had my preferences set (Edit/Preferences/Advanced tab/General tab) to copy each file to my iTunes music folder when copying to iTunes library (I thought--at least the box is checked). However, when I moved several hundred of the files from their original location on my hard drive, the link was broken to iTunes. Each time I try to open or play one of these tracks, I get the error message that the file cannot be used because the original file cannot be found. Itunes is looking for the original files in folder(s) outside of my iTunes folder, instead of in the itunes folder. Or so I think; I'm still pretty new at this.
1. What did I do wrong?
2. Is there an easier way to fix this than to delete all 2,000 songs and re-import them?
3. Is it really necessary to re-establish links one song at a time, instead of a group of songs at a time? (UGH!)
4. I want to delete these songs from the other folder once they're copied into my iTunes folder AND FUNCTIONING in both iTunes and on my iPod. Can I do that?
5. What does the exclamation point icon mean that's appeared next to some of my songs (and Why can't I find any info about it in the iTunes help file or on apple.com)? In some cases it correlates to broken links, but some disappear when I open the song.
6. What does the check box mean that's next to each song (and why can't I find an info about it in the iTunes help file or on apple.com)? (GRR!)
7. A friend suggested I drag and drop files from my iPod disk space directly into iTunes, but I have USB1 ports/drivers which are excruciatingly slow. Is her idea better than copying the files from iPod to an intermediary folder on my desktop? I've already copied everything onto my computer, and having the iPod plugged in seems to slow everything down.
I've spent two days trying to fix this and the longer I look for answers on iTunes help and on apple.com, without finding a single one, the more questions I have. Please help!

happyhannah wrote:
I right-clicked on the song to 'get info' and found out that the path is 'file://localhost/users/Hannah/desktop/iTunes' etc. I remembered that I had moved the iTunes library to the desktop as not to forget to back it up.
Hmm, if the active iTunes library knows where to look for files but they have been misplaced then putting them back where it expects to find them should work. However you should only be moving the media folder not the library files, or if moving both you should shift-start iTunes and choose a new library.
Now, I have deleted the iTunes library from the (default) Music folder and have put it on the desktop with the hope that this is now where iTunes will find the original library. However, it's still not working!!! Please help!!! I really cannot lose my whole iTunes library
As long as you have the media files and a copy of the library files from your old system it really should be possible to coax them back into working order.
Are you currently connected to a library which lists your media? If so what is the path given for a sample missing file and where is the actual copy of that file now?
tt2

Erro 1171: Definition could not be found

need a little help with this simple error.
I'm just doing
import com.adobe.serialization.json.JSONEncoder;
And getting definition not found on this line.
I added the parent directory of com via Flex build Path -> Source path in the project's properties.
And the import line was created via hinting so i know it exists and flex builder seems to know what it contains. So why the error?
thanks!

Hi,
You basically add folders which are not under the main src folder, but it still remains as part of the Project which cannot be shared.
I couldn't find any global settings for Flex (under Eclipse) where it can be shared across projects.

Error: Master Copy for Type Definition Could Not Be Found

See screenshot below please. The typedef is there (I navigated to it via windows explorer and it's not greyed out in the code), and my FPGA VI is not broken, which uses the exact same control. I also created these constants by right clicking and choosing create constant, so it's not as if I'm loading the wrong enum. Has anyone seen this before?
CLA, LabVIEW Versions 2010-2013
Solved!
Go to Solution.
Attachments:
untitled.PNG ‏30 KB

Because I am a bad scientist, I do not know exactly what fixed my problem because I changed more than one variable at once.
Here's what I did:
Removed auto-populating folder from project (doubt this mattered, still broken after this)
Changed my open FPGA VI reference from using a bitfile to using a VI, selected my FPGA VI, NO MORE BROKEN RUN ARROW! YAY.
The above finding led me to go look at my FPGA bitfiles on disk -- I had two of them (weird). Usually a compilation just overwrites the older file.
Just in case the names give any insight, they are:
Older: NASATTRControlCo_FPGATarget_FPGAMain_25B3817B.lvbitx
Newer: NASATTRControlCo_FPGATarget_FPGAMain_25AF817B.lvbitx
I went back to my open FPGA VI reference, and selected the most recent bitfile that I compile this morning -- No more broken run arrow.
I have a feeling this may be due to selecting an old bitfile, but usually if the bitfile doesn't include the control, it won't show up in the read/write control node. If anyone from NI would like to comment on this I'd appreciate the insight on what may have happened.
I am wondering if it's because I installed 2010 SP 1? Who knows but it's fixed now.
CLA, LabVIEW Versions 2010-2013

Compiling with Flex 4.0 gives flash.desktop.NativeProcess could not be found

Hello!
I have an ActionScript only Flex project that was written by someone else.
I know it was compiled successfully for Air 2.0
I can compile this project using Flex Hero and with <application xmlns="http://ns.adobe.com/air/application/2.6"> - however, my air file will install only on windows (on mac i get a weird 'installation file is corrupt, contact the author' error message).
So now I want to compile it for Air 2.0 as it was originally written for. So i change the used Flex SDK from Hero to 4.0 and change the target air version to <application xmlns="http://ns.adobe.com/air/application/2.0"> - but then i get three compilation errors:
Description Resource Path Location Type
1061: Call to a possibly undefined method openWithDefaultApplication through a reference with static type flash.filesystem:File.
Description Resource Path Location Type
1172: Definition flash.desktop:NativeProcess could not be found.
Description Resource Path Location Type
1172: Definition flash.desktop:NativeProcessStartupInfo could not be found.
but I read that these features were introduced with AIR 2.0 - so how can't I compile if I change the SDK from Flex Hero to Flex 4.0?

Figured it out... Make sure your descriptor file has the following namespace definition!!
"http://ns.adobe.com/air/application/2.0beta"

CV02N Error in Windows 7: This file could not be found!

After uploading a file to the DMS, we could usually double click the file name and the file will be opened automatically in WORD.
This was succeeded in Windows XP.
But in Windows 7 environment, after clicking the file name, the WORD is started, no file opened. It says: This file could not be found!.
Is there any solution about this issue? Thanks!
BTW, I have tried GUI 720. But the issue remained the same.

jcaverly wrote:
I imported from the external drive, and see 'Add' highlighted, now what.
Sorry I'm being so dense, all the language seems arbitrary.
Now what? You've imported the photos, do whatever you want with them.
You should really consider reading or watching some basic tutorials about Lightroom, such as
Lightroom 5 - Free Quick Start Guide PDF eBook | The Lightroom Queen

I want to play songe in itunes bur all i get i "song could not be used because original file could not be found"

i want to play songe in itunes bur all i get i "song could not be used because original file could not be found"i want to play songe in itunes bur all i get i "song could not be used because original file could not be found"

but they are on my phone and play

Object library invalid or contains references to object definitions that could not be found problem

Hello,
Yesterday I got the following error on the server: "object library invalid or contains references to object definitions that could not be found problem".
I found this documentation, followed the steps and all was OK on the server:
http://support.microsoft.com/kb/2703186/en-us
https://social.msdn.microsoft.com/Forums/office/en-US/e94f2fc3-71f1-4dad-bbf1-37f906e28e8e/object-library-invalid-or-contains-references-to-object-definitions-that-could-not-be-found?forum=exceldev
Our server is used to do batch processing for refreshing our excel's. This morning, after the excel's got refreshed on the server, I've got this error on the
client computers (everything works fine on the server computer). I did the steps above on the client computers, but the problem still persists.
It looks like there is a difference in version between server and client.
If I do the refreshing on the same computer there is no problem. But when the server does the refreshing and I try to open it on a different computer, I get this error.
The security update has been removed from the computer, but I can't use my excel's anymore.
Does any one have some advice for me?
Best regards,
Wouter

Hi Wouter,
Thanks for the further explaintation.
According to the description, the issue seems that the Workboook on the client side(with lower Excel version) couldn't run the VBA after it opened by server(higher version Excel application).
If I understood correctly, that sounds that the issue is relative to the specific version of Excel product or the updates.
I suggest you contacting Microsoft support to raise an incident so that our engineer could work closely with him to identify the root cause and resolve this issue as soon as possible.
If the support engineer determines that the issue is the result of a bug the service request will be a no-charge case and you won't be charged.
Please visit the below link to see the various paid support options that are available to better meet your needs.
http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Object library invalid or contains references to object definitions that could not be found

I have an excel macro application. It works ok in my machine. Whenever I send it to my colleague and he opens the file and save and send it back to me, I get the below error. But, it is working
ok in my colleague machine.
Compile error:
Object library invalid or contains references to object definitions that could not be found
Looks like some recent windows update is causing this issue. I tried to delete the temporary file from the command prompt as mentioned in some of the forums using the below command. But, still it
is not working.
DEL /S /A:H /A:-H *.EXD
Even tried to uninstall the recent windows update on both of our machines, but still the issue is not resolved. It is working ok in his machine, but I get the compile error. Please share your thoughts.
Thanks.
Below are the references available in the excel macro application. There is no missing reference error on both of our machines. We both are using Excel 2010 32 bit. My OS is windows 7 64 bit and
my college is having windows 7 32 bit.
Visual Basic For Applications
Microsoft Excel 14.0 Object Library
Microsoft Forms 2.0 Object Library
Microsoft Office 14.0 Object Library
OLE Automation
Microsoft ActiveX Data Objects 2.6 Library
Microsoft Visual Basic for Applications Extensibility 5.3
Microsoft XML, v6.0

"Looks like some recent windows update is causing this issue. I tried to delete the temporary file from the command prompt as mentioned in some of the forums
using the below command"
I've heard some cases that even deleting EXD files and running the FixIt tools, ActiveX controls weren't working.
Can you confirm if you can insert ActiveX controls in your worksheet, please?
(Developer tab >> Insert button >> any ActiveX control of your choice)
Felipe Costa Gualberto - http://www.ambienteoffice.com.br

Definition could not be found - but library is there!

Similar Messages

Maybe you are looking for