Delay of several seconds during a call

IPhone 6 is my phone when I buy her tapes 8.0.2 when he answered the call takes about 2 seconds after pressing the green kiosks connected. He feeds after update 8.1.1 is still the same problem.mnaz heard other people who had the same problem with their phone (iPhone 4S and 5 and 5 s)
Is this problem solved his new tapes? Please help me to solve my problem. Thank

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the sessionstore.js [2] file and possible sessionstore-##.js [3] files with a number and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
See also:
* [1] http://kb.mozillazine.org/Session_Restore
* [2] http://kb.mozillazine.org/sessionstore.js
* [3] http://kb.mozillazine.org/Multiple_profile_files_created

Similar Messages

  • Im not heard after 10 seconds during my call

    im not heard after 10 seconds during my call

    First thing first. try your sim card in another phone to rule out carrier/location issues.
    Once you rule out that then do:
    Reset & restore
    http://support.apple.com/kb/HT1430
    http://support.apple.com/kb/HT1414

  • Computer is slow to respond when mouse is clicked and typed letters appear after a delay of several seconds

    When I type or start to type the characters appear after a delay. Scrolling up and down and clicking on some tabs or links is very slow.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
    Delete the sessionstore.js [2] file and possible sessionstore-##.js [3] files with a number and sessionstore.bak in the Firefox Profile Folder.
    * Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
    See also:
    * [1] http://kb.mozillazine.org/Session_Restore
    * [2] http://kb.mozillazine.org/sessionstore.js
    * [3] http://kb.mozillazine.org/Multiple_profile_files_created

  • When connecting to the internet, there is a delay of several seconds before the tabs load and open (sometimes have to click on a tab to get things started).

    Internet speed = 2.7 Mbits/sec; this problem started with the new firefox update; operating system is Windows 7 (64bit); this problem doesn't happen with Explorer;

    Okay, I found the solution. I simply restarted my computer, and the problem has gone away...so far.

  • Several-second delay after any click before FireFox will accept any other input.

    FireFox has gotten very slow. The toolbar comes up right away, but it takes ~15 seconds before it will respond. Says, "(Not Responding) if you click ANYTHING on the screen. After that, when you finally can use it, there is a several-second delay before inputting anything via typed command or mouse-click, before FireFox allows any more input. Computer works fine otherwise, it seems to be a FireFox-specific problem. When first installed a few weeks ago, FireFox was very fast.

    Please try starting Firefox in Safe Mode. Click Start Menu > Click Programs > Click Mozilla Firefox > Click Mozilla Firefox Safe Mode.

  • When making or receiving calls on my iPhone 4, I can hear the person on the other end, but they can't hear me. This happens most of the time, but occaisionally, it works! Sometimes it starts during the call...Can you help me?

    Infos:
    IPhone 4, 32 GB
    IOS 7.1.2
    Problem:
    Videos, memos and other sound microphone using applications work without any problem. It just appears when calling or being called. Sometimes it starts during the call.
    Situation:
    I sent my damaged IPhone 4 to apple for reparation. I bought it for 180 € + 20 € for my retailer.
    Some calls later this problem started (only at the new or repaired IPhone). My 3 month warranty is almost over (4 weeks left)
    Steps to solve the problem:
    - rebootet the IPhone several times
    - made a backup (iCloud and ITunes) and recovered it again
    - I set back all settings to standard.
    --> Nothing changed
    Then I went to my retailer, who sent it to Apple, but I just received a sheet of paper where they said, they did nothing.
    Surprisingly the problem still exists. Started at the second call I received. Now the warranty time is going to run out in 4 weeks.
    Open Questions:
    What else can I do? I have a not working IPhone and nobody want's to help me ?!? I feel lost and disappointed. Do they want to cheat me, so my warranty runs out? Thanks for any help

    I have the same problem.
    IPhone 4
    IOS 7.1.2
    My retailer sent it to Apple, but I just received a sheet of paper where they said, they did nothing.
    Surprisingly the problem still exists. Now the warranty time is going to run out in 4 weeks.
    What else can I do? I have a not working IPhone and nobody want's to help me ?!? I feel lost and disappointed.

  • Why does Bookmarks take several seconds to respond after I move a bookmark when Sync enabled, but not when Sync is disabled?

    With FFox open and Sync enabled, moving a bookmark, either in the Bookmark sidebar or in 'Show All Bookmarks' window, to another location - for example: dragging a bookmark from "Unsorted" to another location in Bookmarks - causes a delay during which time the Bookmark list seems to freeze and bookmarks can't be moved, selected, etc. The delay lasts for several seconds, and is longer on slower/older machines. If I attempt to move a bookmark (or folder) during the delay, it will move in unexpected ways once Bookmarks unfreezes as locations within the Bookmark list have changed.
    With Sync disabled, bookmarks can be moved/selected/etc. without any delay.
    Systems Tested: [Note: All systems had the most current version of FFox available for them.]
    MacBook Pro 26 (2014) w/OSX 10.9
    IBM ThinkPad T41x (2010) w/XPpro
    Macbook Pro 266 (2009) w/OSX 10.6
    IBM ThinkPad T61x (2008) w/XPpro
    Mac Mini (2008) w/OSX 10.6
    Mac Mini (2007) w/OSX 10.5
    Macbook Pro 233 (2007) w/Ubuntu v14
    ASUS P1AH (2006) w/Ubuntu 12
    My main computer is the Macbook Pro 266, and I noticed this behavior: FFox v36 bookmark delay with Sync enabled is about the same as v35, v35 was worse (longer delay) than v34, v34 was better (less delay) than v33, v33 was better than v32, V32 was much worse than v31, v31 was much worse (Sync unusueable) than v30, v30 was much worse (Sync unusueable) than v29, v29 delay made Sync unusueable.

    Currently 664 [exported from FFox Bookmarks to URL Manager for the count] abut never more than 4000: beyond 4000 bookmarks and FFoxs' Bookmarks respond slowly even without Sync active. I currently have 5 computer with FFox set up to use Sync. While I don't expect FFox to manage a huge collection of URLs, I would be nice to be able to access a Bookmark collection of 6000 to 8000 without noticeable delay. It's a simple text file after all, and as I'm only effecting one URL, why so long to update?
    fyi: URL Manager tells me that I've amassed about 300,000 bookmarks, some from the late 90's which I still use for research.

  • HT4623 Please help ! My Iphone 5 is restarting during a call or internet browsing, o just simply browsing the meniu. I can not us it any more !

    Please help ! My Iphone 5 is restarting during a call or internet browsing, o just simply browsing the meniu. I can not us it any more !
    It is functioning max 5 minutes. I have tried to restore it via Itunes but it sitais to less opened.

    Hello neegie
    Try putting your iPhone into recovery mode and then use iTunes to restore it. After that then test it out. If during the restore you get and error code, check it against the second article for further assistance.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694
    Regards,
    -Norm G.

  • I am using an iPad with Apple TV and airplay with a projector in my classroom.  The mirroring cuts out and back on several times during use. Any suggestions on what's causing it and how to fix it?

    I am using My iPad with Apple TV, Airplay and projector in my classroom.  The projector screens blanks out and back on several times during a presentation. It seems like a problem with connection but I'm not sure as it comes back on after a few seconds. Any idea of what is causing this and how it can fixed?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
     Cheers, Tom

  • Iphone 4, people can't hear me during a call

    Hello,
    I'm reporting an issue related to "phone call" that seems to be common with Iphone 4, but I can not find the proper fix.
    First of all My mobile is an Iphone 4 out of warranty, and thus no chance to get any replacement from apple.
    Few weeks ago the phone just falls and then my problems during phone call starts:
    During calls or right at the start of a call peolpe can not hear me. If I just tap at the rear of the phone or just push hard on the back of the phone, it comes back.
    But this is a pain as few seconds after people can hear me again...then tap on the phone...this back...and again and again..
    I've tried all these fixes found on forum, but it does not solve the problem.
    - Itune restore/updqte under DFU: no change
    - Use earphones : no change
    - try without 3G: no change
    - check sim card: no change
    - change the iphone  micro (bottom one): no change
    - clean the ambiance micro hole (top one): no change
    - put some plastics spacer like there http://www.youtube.com/watch?v=0jhWxYTVxe4 : no change
    Note that face time: is working fine and sound recorder also!!!!
    Please any idea? Does apple plan to update IOS. I heard it was linked to Audio conversion CPU that was poorlu soldered?!!
    Thanks

    Yeah,
    That *****.  I've been a super loyal customer.
    I'm basically an apple freak and have dragged a number of my friends down the apple road... Macbook pros, ipads, iphones.. and now I'm stuck with a broken iPhone..
    I've found that the people at the "Genius Bar" are not that genius.  Once... ONCE I've come one that was super helpful and smart, but all the other times, they were trying to give me lame excuses and beat around the bush.  That's when I started to explain to them.  (I seriously contemplated on working at Apple as one of the genius guides.)   I'd rather have a plain "I don't know" answer than tell me a bunch of nonsense (if you know what I mean).
    Anyways.  Thanks for the reply.
    I really don't know what to do with my phone now.. And I'm not really willing to pay $190 to trade/replace my iPhone 4.  It's a bit too much for me. And its not even an upgrade to the iPhone 4s!!
    Thanks for letting me vent..
    Thanks Vazaria!
    Let me know if anything turns up!
    God bless!

  • Eth0 is being up and down for several time during boot

    My wicd doesn't connect to eth0 on the first attempt after boot up. It is configured to eth0 always have a higher priority to connect.
    My dmesg shows that eth0 being up and down for several time during boot. I have e1000e in my MODULES list.
    Here is my rc.conf
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
    # startup and during the boot process. If set to 'no', the C locale is used.
    # HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
    # in the hardware clock being left untouched (useful for virtualization)
    # Note: Using "localtime" is discouraged, using "" makes hwclock fall back
    # to the value in /var/lib/hwclock/adjfile
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # Note: if unset, the value in /etc/localtime is used unchanged
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE="en_US.UTF-8"
    DAEMON_LOCALE="no"
    HARDWARECLOCK=""
    TIMEZONE="Asia/Hong_Kong"
    KEYMAP="us"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    # MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
    # Replace every !module by an entry as on the following line in a file in
    # /etc/modprobe.d:
    # blacklist module
    # See "man modprobe.conf" for details.
    MOD_AUTOLOAD="yes"
    MODULES=(acpi-cpufreq fuse tp_smapi vboxdrv e1000e)
    # Udev settle timeout (default to 30)
    UDEV_TIMEOUT=30
    # Scan for FakeRAID (dmraid) Volumes at startup
    USEDMRAID="no"
    # Scan for BTRFS volumes at startup
    USEBTRFS="no"
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
    HOSTNAME="antony-tp"
    # Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
    # Wired network setup
    # - interface: name of device (required)
    # - address: IP address (leave blank for DHCP)
    # - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
    # - broadcast: broadcast address (ignored for DHCP) (optional)
    # - gateway: default route (ignored for DHCP)
    # Static IP example
    # interface=eth0
    # address=192.168.0.2
    # netmask=255.255.255.0
    # broadcast=192.168.0.255
    # gateway=192.168.0.1
    # DHCP example
    # interface=eth0
    # address=
    # netmask=
    # gateway=
    # Setting this to "yes" will skip network shutdown.
    # This is required if your root device is on NFS.
    NETWORK_PERSIST="yes"
    # Enable these netcfg profiles at boot-up. These are useful if you happen to
    # need more advanced network features than the simple network service
    # supports, such as multiple network configurations (ie, laptop users)
    # - set to 'menu' to present a menu during boot-up (dialog package required)
    # - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network.d
    # This requires the netcfg package
    #NETWORKS=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    # - prefix a daemon with a ! to disable it
    # - prefix a daemon with a @ to start it up in the background
    # If something other takes care of your hardware clock (ntpd, dual-boot...)
    # you should disable 'hwclock' here.
    DAEMONS=(!hwclock syslog-ng dbus !network !dhcpcd rpcbind acpid @wicd nfs-common netfs @crond cups @laptop-mode @alsa @sensors ntpd @slim bluetooth)
    Here is a segment of my dmesg
    [ 2.759302] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
    [ 2.759304] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
    [ 2.759338] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [ 2.759348] e1000e 0000:00:19.0: setting latency timer to 64
    [ 2.759467] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
    [ 2.766107] tpm_tis 00:0a: 1.2 TPM (device-id 0x0, rev-id 78)
    [ 2.766808] ACPI: AC Adapter [AC] (on-line)
    [ 2.776492] wmi: Mapper loaded
    [ 2.777212] mei: module is from the staging directory, the quality is unknown, you have been warned.
    [ 2.777781] thermal LNXTHERM:00: registered as thermal_zone0
    [ 2.777783] ACPI: Thermal Zone [THM0] (66 C)
    [ 2.778291] iTCO_vendor_support: vendor-support=0
    [ 2.780137] ACPI: Battery Slot [BAT0] (battery present)
    [ 2.780958] input: PC Speaker as /devices/platform/pcspkr/input/input4
    [ 2.781462] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    [ 2.781547] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
    [ 2.781919] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 2.783139] cfg80211: Calling CRDA to update world regulatory domain
    [ 2.789182] [drm] Initialized drm 1.1.0 20060810
    [ 2.789538] hub 4-1:1.0: USB hub found
    [ 2.789616] hub 4-1:1.0: 8 ports detected
    [ 2.792925] Non-volatile memory driver v1.3
    [ 2.795877] thinkpad_acpi: ThinkPad ACPI Extras v0.24
    [ 2.795879] thinkpad_acpi: http://ibm-acpi.sf.net/
    [ 2.795881] thinkpad_acpi: ThinkPad BIOS 8DET54WW (1.24 ), EC unknown
    [ 2.795882] thinkpad_acpi: Lenovo ThinkPad X220, model 4290NL5
    [ 2.797236] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
    [ 2.797352] thinkpad_acpi: radio switch found; radios are enabled
    [ 2.797466] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
    [ 2.799752] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
    [ 2.800067] Registered led device: tpacpi::thinklight
    [ 2.800091] Registered led device: tpacpi::power
    [ 2.800106] Registered led device: tpacpi::standby
    [ 2.800120] Registered led device: tpacpi::thinkvantage
    [ 2.800192] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
    [ 2.800254] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
    [ 2.801077] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
    [ 2.801162] sdhci: Secure Digital Host Controller Interface driver
    [ 2.801164] sdhci: Copyright(c) Pierre Ossman
    [ 2.801707] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
    [ 2.801709] Copyright(c) 2003-2011 Intel Corporation
    [ 2.801744] iwlwifi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 2.801753] iwlwifi 0000:03:00.0: setting latency timer to 64
    [ 2.801789] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
    [ 2.801791] iwlwifi 0000:03:00.0: pci_resource_base = ffffc90005abc000
    [ 2.801793] iwlwifi 0000:03:00.0: HW Revision ID = 0x34
    [ 2.801877] iwlwifi 0000:03:00.0: irq 49 for MSI/MSI-X
    [ 2.801913] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
    [ 2.801962] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
    [ 2.802045] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 7)
    [ 2.802067] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 2.802107] sdhci-pci 0000:0d:00.0: setting latency timer to 64
    [ 2.802118] _regulator_get: 0000:0d:00.0 supply vmmc not found, using dummy regulator
    [ 2.802188] Registered led device: mmc0::
    [ 2.803329] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
    [ 2.815226] iwlwifi 0000:03:00.0: device EEPROM VER=0x715, CALIB=0x6
    [ 2.815229] iwlwifi 0000:03:00.0: Device SKU: 0X1f0
    [ 2.815231] iwlwifi 0000:03:00.0: Valid Tx ant: 0X3, Valid Rx ant: 0X3
    [ 2.815247] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
    [ 2.845674] iwlwifi 0000:03:00.0: loaded firmware version 17.168.5.3 build 42301
    [ 2.845820] Registered led device: phy0-led
    [ 2.850630] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 2.862431] usb 1-1.2: new low-speed USB device number 3 using ehci_hcd
    [ 2.943648] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:92:77:26
    [ 2.943651] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
    [ 2.943712] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
    [ 2.943734] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 2.943739] mei 0000:00:16.0: setting latency timer to 64
    [ 2.943817] mei 0000:00:16.0: irq 50 for MSI/MSI-X
    [ 2.944502] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
    [ 2.945021] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 2.946341] watchdog: INTCAMT: cannot register miscdev on minor=130 (err=-16).
    [ 2.946452] watchdog: error registering /dev/watchdog (err=-16).
    [ 2.946523] mei: unable to register watchdog device.
    [ 2.946598] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
    [ 2.946692] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
    [ 2.946734] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 2.948359] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [ 2.948422] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
    [ 2.948444] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
    [ 3.022245] usb 1-1.3: new full-speed USB device number 4 using ehci_hcd
    [ 3.172080] usb 1-1.4: new full-speed USB device number 5 using ehci_hcd
    [ 3.274597] Bluetooth: Core ver 2.16
    [ 3.274611] NET: Registered protocol family 31
    [ 3.274612] Bluetooth: HCI device and connection manager initialized
    [ 3.274614] Bluetooth: HCI socket layer initialized
    [ 3.274614] Bluetooth: L2CAP socket layer initialized
    [ 3.274618] Bluetooth: SCO socket layer initialized
    [ 3.275535] Bluetooth: Generic Bluetooth USB driver ver 0.6
    [ 3.276006] usbcore: registered new interface driver btusb
    [ 3.338454] usb 1-1.6: new high-speed USB device number 6 using ehci_hcd
    [ 3.444567] Linux media interface: v0.10
    [ 3.447387] Linux video capture interface: v2.00
    [ 3.448573] input: Logitech Trackball as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input6
    [ 3.448671] generic-usb 0003:046D:C404.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:1a.0-1.2/input0
    [ 3.448690] usbcore: registered new interface driver usbhid
    [ 3.448691] usbhid: USB HID core driver
    [ 3.449136] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217)
    [ 3.450945] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input7
    [ 3.450987] usbcore: registered new interface driver uvcvideo
    [ 3.450988] USB Video Class driver (1.1.1)
    [ 3.484049] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
    [ 3.491137] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
    [ 3.491298] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
    [ 3.491486] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0
    [ 3.491637] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 3.491709] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 3.491765] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [ 3.492050] i915 0000:00:02.0: power state changed by ACPI to D0
    [ 3.492053] i915 0000:00:02.0: power state changed by ACPI to D0
    [ 3.492059] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 3.492062] i915 0000:00:02.0: setting latency timer to 64
    [ 3.538056] mtrr: no more MTRRs available
    [ 3.538058] [drm] MTRR allocation failed. Graphics performance may suffer.
    [ 3.538266] i915 0000:00:02.0: irq 52 for MSI/MSI-X
    [ 3.538270] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 3.538271] [drm] Driver supports precise vblank timestamp query.
    [ 3.538292] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 3.664501] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x120c00
    [ 3.664518] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
    [ 3.716317] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
    [ 4.407165] fbcon: inteldrmfb (fb0) is primary device
    [ 4.575259] Console: switching to colour frame buffer device 170x48
    [ 4.577042] fb0: inteldrmfb frame buffer device
    [ 4.577043] drm: registered panic notifier
    [ 4.607860] acpi device:01: registered as cooling_device4
    [ 4.607985] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input13
    [ 4.608039] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
    [ 4.608122] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 4.757243] EXT4-fs (sda3): re-mounted. Opts: discard
    [ 4.765917] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: discard
    [ 4.776777] Adding 262140k swap on /dev/sda2. Priority:-1 extents:1 across:262140k SS
    [ 5.099467] NET: Registered protocol family 10
    [ 6.048650] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [ 6.098038] Bluetooth: RFCOMM TTY layer initialized
    [ 6.098055] Bluetooth: RFCOMM socket layer initialized
    [ 6.098057] Bluetooth: RFCOMM ver 1.11
    [ 6.278766] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
    [ 6.278893] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
    [ 6.568639] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
    [ 6.568775] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
    [ 6.684082] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 7.176563] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
    [ 7.226662] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
    [ 7.227110] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 10.229345] IBM TrackPoint firmware: 0x0e, buttons: 3/3
    [ 10.490618] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input14
    [ 10.817814] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
    [ 10.819315] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 11.186166] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
    [ 11.186292] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
    [ 11.313367] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 11.665342] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
    [ 11.717591] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
    [ 11.718042] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 11.964795] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
    [ 12.017213] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
    [ 12.017720] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 13.811264] EXT4-fs (sda3): re-mounted. Opts: discard,commit=0
    [ 13.826031] EXT4-fs (sda4): re-mounted. Opts: discard,commit=0
    [ 15.178905] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
    [ 15.180472] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 25.663056] eth0: no IPv6 routers present
    Any hint for tracing the root of this problem? Thank you very much!

    Hi ...
    If you have moved the Safari application from the Applications folder, move it back.
    As far as the cache goes, there's a work around for that when you can't empty the Safari cache from the menu bar.
    Go to    ~/Library/Caches/com.aple.Safari.Cache.db.  Move the Cache.db file to the Trash.
    Try Safari.
    Mac OS X (10.7.2)   <  from your profile
    If that is corrrect, you need to update your system software. Click your Apple menu icon top left in your screen. From the drop down menu click Software
    Update ...
    ~ (Tilde) character represents the Home folder.
    For Lion v10.7x:  To find the Home folder in OS X Lion, open the Finder, hold the Option key, and choose Go > Library

  • Delay of 5 seconds between Video and Audio.

    Hi,
    I've a site where consumer can take a live meeting with the beauty consultant. The problem I'm facing is during the video chat. Basically there is a delay of 5 seconds between Video and Audio when I access the site from out of my network but when I access it within my network (VPN) then it's work fine.
    Please help me out from this problem. I'm using FLEX & FMS 3.5.
    Thanks,
    Sanjay

    Go through the article "http://www.adobe.com/devnet/flashmediaserver/articles/dynstream_live.html" and see paragraph with heading "Obtaining client maximum bandwidth capacity". This says how to use "Live aggregate messages". You can try disabling it also which can be done as below:
    Find Application.xml in this conf directory and search for queue tag. Disable the queue.
    <Application>
                    <!-- Live queuing and aggregate messages are turned off the multicast  -->
                    <!-- sample application to enhance the performance and flow of messages -->
                    <!-- delivered to multicast streams. Setting the queue to "true" can        -->
                    <!-- cause delay in the multicast playback.                                                            -->
                    <StreamManager>
                                    <Live>
                                                    <Queue enabled="false">
                                                                    <AggregateMessages enabled="false">
                                                                    </AggregateMessages>
                                                    </Queue>
                                    </Live>
                    </StreamManager>
                    <Client>
                                    <AggregateMessages enabled="false"></AggregateMessages>
                    </Client>
    Let me know if this helps.

  • Z10 loses signal during a call

    I have a issue with loss of signal during a call on my z10.
    When the automatic mail checking enabled and during a call mail is checked, I hear snatches of words and communication break, look at the screen see the message "network is busy" and zero signal icon. But after a few seconds the signal becomes full again.
    Sometimes I have to call back 3-4 times to finish the conversation.
    I have tried different OS versions, but nothing helps.
    I had to turn off push notification in gmail account and switch to manual mail check for this to happen as infrequently as possible. But still it happens sometimes.
    Many users from Russia have same problem.
    My current OS: 10.2.1.3247
    STL100-2
    Operator "MTS" Russia
    P.S. Sorry for my English

    Hey TalG,
    Welcome to the BlackBerry Support Community Forums.
    Thanks for the question.
    I would suggest removing the battery and placing it back in.  If the issue still persists, then I suggest contacting your network service provider and try a new SIM card.
    Let me know if you have any more questions.
    Cheers.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • RMI server and client in one application - Exceptions during some calls

    I wrote an application, which is an RMI-Server (Server1), and another separate application, which is an RMI-Client (Client1). Because I wont use dynamic class loading, I gave the client beside the interface.java also an interface_implementation.java, which is only a dummy of the original interface_implementation of the server. This dummy contains only declarations of the methods (parameters and return values) and no functional code. From this dummy the _stub.class is generated, and it works fine - no problem.
    Now I want to modify Client1 to become also an RMI-Server (Server2) for a second, separate Client (Client2), the methods used are different from the first RMI connection. This Client2 uses a dummy of the implementation of Server2 in the same way as described above. The application Client1+Server2 only has to "translate" the calls from Client2 to Server2 into calls of Client1 to Server1 (Server1 is not changed at all). In case of primitive method parameters or return values this chain of RMI-applications works fine, but in case of more complex structures (my own classes) during the call of Client1 to Server1 an "ClassNotFoundException: access denied to class loader" occurs by running through the stub. Both stub.classes are found, all of the applications know the objects needed, the call of Client1 to Server1 is exactly the same call as it was during the simple version (only Server1 and Client1).
    Does anybody know, why this exception occurs and how I can overcome this ?
    Axel

    I figured out a solution - it's a problem of policies. In detail: Server1's codebase entry (file:) refers to the class directory of Server1's project. In the simple case of only Client1, which has no codebase entry, it works fine without a file permission on the side of Server1. In the complex case of Client1+Server2, which has to have a codebase entry (file:) refering to the class directory of the Server2's project on a separate machine, for exactly the same method call from Client1 to Server1 a file permission entry on the side of Server1 is needed for Server1's class directory. But WHY ???
    It seems to be a little confusing with the codebase entries, many of the posts are contrary to others and to my personal experiences. Some comments given by Adrian Colley throw a little light upon some aspects. Is there anybody, who can explain the whole topic, when, why, and which part of RMI application deals with codebase entries, also in case of not dynamic code downloading ? May be there is also a reference into the java docs, which I didn't found up to now.
    Thanks in advance
    Axel

  • How do i put loudspeaker on during a call?

    how do i put on loudspeaker on my phone 4s during a call??????
    i want record a voicemail message to my mac (in garageband) but cant find the loudspeaker option....
    any clues?

    When you receive a call and have answered it, if you look at your screen you should see several options, one being speaker, tap the icon and your call will be placed on speaker. The other option is to go settings>general>accessibility>incoming calls and change to speaker. Be warned though, if you change it in settings all your incoming calls will be on speaker until you change the option back to default.

Maybe you are looking for

  • Can I have a Text Search in HTML Help output?

    Hello, I'm relatively new to Robohelp and while testing the possible output methods I found that there is no internal text search function available for the Microsoft HTML Help (.chm) file. Does anyone know if it is possible to enable this function?

  • Outlook 2010 and HP Laserjet 3005d paper tray choice

    Windows 7, Offfice 2010.  HP Laserjet P3005d.   Stand alone computer. This problem only occurs when printing from Outlook 2010.   No other Microsoft or other program on our system shows this problem. We have an extra tray for this printer, and it is

  • Settlement of Project Cost and revenue to GL

    I am trying to Settle the project Cost and Revenue to GL account. For the same I have defined settlement profile maintaining GL as optional receiver and then I have maintained Source structure for cost and revenue as to separate them at the time of d

  • How to change you security questions if you have forggot them ?

    How to change you security questions if you have forggot them ?

  • Video storage on WVC54GCA

    I have a WVC54GCA.  The question I have is : where is the motion detected video stored.  Is it stored in the camera or the computer linked to it?  Does it require the linked computer to be on and and the utility software running for video to be captu