Delay the PO and Invoice Matching.
We have a scenario where in the Vendor sends invoice as soon as he receives a PO.
This invoice is being matched to the PO which is stopping the business from editing the PO (Quantities on PO Lines).
Do we have an option to delay the Invoice from matching the PO for a specific time, say 2days?
We are using 3-way matching.
Regards,
Gopi
As you are using 3-way matching, don't receive the PO till it is actuly received from supplier. In this case the invoice will be on hold while you try to match.
Invoice hold will be automatically released once receipt is done.
Similar Messages
-
Show the PO and Invoice Number along with Distribution Line Info
Does any one have some code that can show the PO and Invoice number along with the distribution line detail?
I'm tring to get to the po.po_vendors for segment1 and po.po_distributions_all but it screws up at the po.po_lines_all table which needs outer joins and it's just not working for me.In case Invoice Distribution is matched to a Purchase Order then
ap_invoice_distributions_all.PO_DISTRIBUTION_ID and ap_invoice_distributions_all.DIST_CODE_COMBINATION_ID is the link to po_distributions_all table
Hope this help
Ashish -
Enter the Apple ID you want to use for iCloud in Control Panel > Network > Internet > iCloud.
Enter the Apple ID you want to use for store purchases (including iTunes in the Cloud and iTunes Match) in iTunes > iTunes Store.Welcome to the Apple community.
iTunes and iCloud and different accounts, you will need to delete both accounts from your device before adding the new details in their place.
For iCloud go to settings > iCloud, scroll down and hit the delete button. You can then sign back in using your correct details. For iTunes go to settings >store, tap your account ID and then sign out, you can then sign back in using your correct Apple ID. -
I used a usb turntable to import old vinyl records into iTunes. Then with the cloud and iTunes match I put them on another Mac. The songs come up in the music list but they are greyed out. How do I get them recognized. The symbol states the songs were downloaded from iCloud. I would like to get them to play so that I can make a playlist, and burn a CD.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
I'm a iPhone 4s and new iPad 3 owner. I'd like the apps and organization time I've invested in the iphone to be exactly transfered to the ipad. Is this possible? Will all the applications and folders match exactly? Thank you for your help
Restore the latest iPhone backup you made to the iPad.
-
Script to update vendor inactive date and invoice match option
As part of a review of our precure to pay process in 11.5.10, we have to make a change to a large number of suppliers (vendors).
We want to disable about 7000 suppliers by setting the inactive date and for the remaining suppliers change the invoice match option from receipt to purchase order
There does not appear to be any api that I can use to make these changes.
Does anyone have any experience in using a baisc update script to change the data.
Scripts would be something like:
Inactivate suppliers
update po_vendors
set end_date_active = sysdate
where vendor_id in <list of vendors to update>
update po_vendor_sites_all
set inactive_date = sysdate
where vendor_site_id = <list of vendors sites to update>
Change invoice match option
update po_vendors
set match_option = 'P'
where vendor_id in <list of vendors to update>
update po_vendor_sites_all
set match_option ='P'
where vendor_site_id = <list of vendors sites to update>Hello.
In your place i would not have the guts to use SQL for a task like that. You know what Oracle says about using tools to modify data in the database. They always say that it is not supported and to use forms to modify the data. So I would suggest you to use a tool like DataLoad to query and modify your suppliers.
Octavio -
I have icloud and itunes match and most of my songs have been uploaded to the cloud. Some songs still have the "waiting" icon next to them and when I turn itunes match on they neither upload nor are they determined ineligible. My computer will literally spin its wheels for hours trying to upload the same song. Additionally, I uploaded an audiobook disc on my computer and 3 of the 11 tracks are still waiting to be uploaded???
The exclamation mark happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
If the missing files just can't be found then, assuming you are in region where you are permitted multiple downloads of your audio purchases, delete the current enties and download again from your purchased history.
tt2 -
I synced my iTunes with my iPhone 5. some of the titles on't match the songs. I checked my iTunes database, it is the latest version, and the titles and songs all match. So how do I fix this on my iPhone?
Sounds like you may need to re-download the entire albums from iTunes. See this KB article for how to download past purchases: http://support.apple.com/kb/HT2519.
I'd suggest doing it one album at a time. Delete one, download it from your purchase histor, then the next, etc. -
How can i delay the line and charactor rate of my serial port transmisio​n?
In hyperterminal I can pick the line and charactor rate , but I can't seem to slow down the rate when using the serial port by itself.
Attachments:
remod_chan_4.txt 1 KB
serial_INT_chan3.vi 31 KB
read_text_file.vi 20 KBThere's nothing built into the VISA or old serial functions but it's pretty simple to program yourself. Here's a VI for specifying a delay between characters. It uses VISA but you can easily swap that out with the old serial write if you want. It just breaks out the text string character by character and adds a delay before each character is written. To add a line delay, just add another delay after the entire string is written.
Attachments:
Serial_Write_With_InterCharacter_Delay.vi 45 KB -
Iphone 5 very slow, how do I remove music? Im using the icloud and itunes match.
The phone locks up and restarts on its own now. Hard to navigate with it because its very slow.
Already did a backup and restored it from the backup. Any ideas? ThanksHi Super Scout,
There are a few different reasons this could be happening, and it sounds like you're on the right track to isolating the issue. However, it would be very helpful to go one step further and Use iTunes to restore your iOS device to factory settings - Apple Support. This will completely wipe everything off the phone (including the iOS software itself) and install a fresh, clean copy of iOS, just in case there is a corrupt file in there giving you the trouble. After reinstalling iOS, set the phone up as a new iPhone temporarily to test the issue and see if it is still happening. If so, there may be a hardware issue with the device. Hopefully that isn't the case -- if the phone runs smoothly when set up as new then it means there was a corrupt file in the operating system or that there is something in your backup (possibly a third-party app) causing the issue. After testing the iPhone set up as new, go ahead and restore the phone from your backup and see if the issue comes back. If so, you may want to contact Apple Support to see if their diagnostic test helps narrow down which apps are contributing to the issue.
Good luck! -
I have 4 ipods all 4th gen and want to know if one program is available to purchase through apple to have all music I've purchased can be used on all of them. Is it a combo of both itunes match and icloud?
You don't need iTunes Match to have your music in all your devices. iTunes Match is for getting music that you've purchased elsewhere into the cloud. All you need to do is set up each of your devices to your iTunes Store account. You can then download things you've purchased by going to the Purchased section. See:
http://support.apple.com/kb/ht2519
Regards. -
After the cloud and iTunes Match, Can I access all my music in airplane mode?
Seems like Apple hasn't been very clear about this. So now all my music is being stored in the cloud. That should allow me to free up space on my phone...but if I turn on airplane mode, what would be left on my phone if I delete my music locally? If I can't delete the music locally on my phone, what's the point of storing it in the cloud? just backup?
Of course the music in the cloud which has not been downloaded to your iDevice can't be accessed while airplane mode is active. However, all music that has been previously downloaded to your iDevice can be played.
iTunes Match is not designed to be a streaming service. When you listen to music it is downloaded to your iDevice. -
Can we change the Currency in the PO after GR and invoice posting
Hi
Can we change the currency in the PO , Once after posting of the GR and Invoice.
If posssible please suggest me the steps.
Best Regards,
SairamHi Sai,
I suggest not to change the PO Currency once the GR and Invoice is Posted , As the Reports which fetch the PO value will go wrong if we do that.
PS. In ME22n System disables the Currency feild once GR and Invoice Is posted.
Thanks
Sudhakar -
What is the difference between billing and invoice
hi
Hi,
Generally in SAP Billing comes under SD (VF01)to create document to the Customer and Invoice Comes under MM(MIRO)to create document to the Vendor.
In SD side we are given Material to the customer and in MM we are recieved Material from the Customer.
Raghu -
Tax calculation on sales order and invoice is different
2007A, SP0, PL49
The tax on a sales order does not match the tax on the linked delivery and invoice by 1 cent. We take payment based on the sales order amount as the delivery and invoice are done after the fact. Why is the tax calculated differently on the delivery/invoice? We would want it to always match.
Item price = $111.04. Taxcode rate 13% has combination of 5% GST + 8% ONTAX.
On Sales Order, ONTAX = $8.88
On Delivery/Invoice, ONTAX = $8.89
Can someone please explain the difference? Is rounding/tax calcualtion controlled by system settings per document?Something must be wrong with your Sales Order tax. The actual tax would be 8.8832. Round up to 8.89 is correct. Do you have any SP, FMS or add-on been used?
Thanks,
Gordon
Maybe you are looking for
-
How to convert an Excel Formula to a Custom Calculation Script in a Adobe Acrobat 9 Form?
Hello, I am not familiar whatsoever with Javascript and need some help in converting the following Excel Formula so that I can enter it into a Custom Calculation Script in a Adobe PDF Form. Here is the formula: =IF(E15<25.01,9.95,IF(E15<50.01,11.95,I
-
After updating to 10.6.8 and Thunderbolt Firmware June 27
I am having problems running in clamshell mode with the Macbook Pro 2011 with i7 proc since updating os and firmware. I updated the OS a few days ago, but didn't hook up to monitor until today after updating the firmware. Shouldve disconnected mac ex
-
HT204230 What are system requirements for Linux to use the iCloud web interface ?
I access iCloud.com from a Linux workstation using Firefox. Some features are unavailable - like the ability to format text and select fonts for mail Is this iCloud.com's problem or Linux/Firefox's problem ? Thanks.
-
Custom transaction attached to SAP delivered code
HI We have a requirement that all custom program and transactions are secure. Usually we have the developers add an auth check statement to the program and add that check to the custom t-code in SU24. today I have the situation that we are using SAP
-
My iPhone deleted my note for travel! Need quick help.
I've had problems with Notes for quite some time, the notes are usually inexplicably duplicated. I know that has been reported in the past, but that's not my issue now. I edited my note (changing the opening line) to make an entire packing list for a