Delay with installation of business line

I have to say I am absolutely shocked by the poor service I have experienced from BT and its sad that such a huge corporation has so many unsatisfied customers.
I have been trying to have my business line installed since September. Its been connected at the exchange but no connection within the building. Thats all they need to do then put a socket on the second floor. My landlord has done the cabling for them as they refused. I have had 3 enginners all of which have done nothing and majority walked off the job. I am at the end of my tether and will be complaining to OFCOM and consider legal action.

Hi WatsonL84,
Welcome to the forum.
I'm very sorry to hear of all the delays you've been experiencing with the installation of your line. As you have a business account, please use the BT Business forum to raise this and they will be able to help.
Best wishes,
Stephanie
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Similar Messages

Template implemntation for oil and gas business with business line of aviat

While standardizing processes across country for a oil and gas business which has implemented SAP ,do a standard template for a fuel business should be used or specific templates for lubes, aviation business lines be used

Hi Vinay,
This entirely a business and consulting decision. In general its good to have different templates for bulk fuels, Crudes, Packed lubes/Gas, and aviation. This still depends on the volume of business in a particular line.
Regards,
Ashutosh

My PC has blue screened twice in the past week so I force quit it it came back on a few times after that it is now grey screening with inch wide blue lines from top to bottom the apple logo is there and it is trying to boot up but nothing happening

My Mac has blue screened a couple of times this week it started to work a couple of times after that but now it is grey screening with inch wide blue lines from top to bottom the apple logo is also there it is trying to boot up again but won't. Not sure don't know anything about how to fix things but I suspect the fan has stopped working as I can't hear one. The problem I have I now live in Turkey and I am 1000 km from the nearest apple shop which is in Istanbul I believe and I now live in Didim, Altinkum I don't trust the everyday Turkish shop to take it to as they will tell you they know how to fix it but will probably make it worse, typical in Turkey. Please can someone help as we use it for our business and obviously I need it up and running ASAP I am using IPad and iPhone at moment but can't access my files which are on PC.

Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

Users are unable to synchronize document libraries with OneDrive for Business

Hello,
We are having an issue with our users attempting to synchronize document libraries with OneDrive for Business. When a user tried to synchronize the document library either via the "SYNC" button on the document library page using IE or by
manually entering the document libraries path into the OneDrive for Business desktop app they receive the following error
"We can't connect to the specified SharePoint site". The users have the Edit permission to both the site and the document library. I have performed the following actions in attempt to get the synchronization to work.
1. Tested giving user the owner permission to the site and document library. same result.
2. Performed a repair on the users Office 2013 installation.
An interesting point to note is that I myself am able to synchronize the document libraries using both the "SYNC" button on the document library site and by entering the path manually in the desktop app. Difference between my account and the test
accounts is that I'm a site collection administrator and farm administrator. Can anyone shed some light onto this issue?

Hi Corey,
According to your description, my understanding is that the users cannot sync document libraries with OneDrive for Business.
I recommend to check the Permission Level to see if the Use Client Integration Features permission is selected.
If not, check this permission in the corresponding permission level which is granted to the users.
Please also check if the users have the right permission to sync the document library with OneDrive for Business.
More reference:
http://nheylen.wordpress.com/2014/05/15/sync-error-we-cant-connect-to-the-specified-sharepoint-site/
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Problem with installation and activation

Hi, I have a problem with the installation of Adobe Muse.
I had a free 30-days trial, when it was over I bought the product ($ 13 per month),
I installed the program again and I see the same window with the finished Trials
and it requires a serial number and does not allow to enter the program.
I installed the program on your PC wife without any problems, but I can not install it on a laptop.
I have a laptop with Windows 8 operating system.
What I've done:
1. Uninstalled the free program,
2. check the connection to the Internet,
3. has installed a new program from the official website adobe.com,
4. Remove the line for the activation of the hosts file and resave the file,
5. turned off the brandmower,
6. rebooted.
I can't get support for a 3 days, is it the most terrible support I've ever seen? I dunno
Please help me at [email protected]

I guess this stuff helps me
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
2014-08-07 20:07 GMT+07:00 Дмитрий Броский <[email protected]>:
thanx
>
2014-08-07 18:18 GMT+07:00 Prabhakar.Kumar <[email protected]>:
problem with installation and activation created by Prabhakar.Kumar
>> <https://forums.adobe.com/people/Prabhakar.Kumar> in *Help with using
>> Adobe Muse CC* - View the full discussion
>> <https://forums.adobe.com/message/6619532#6619532>
>>

Having lots of problems with getting a phone line ...

this may be a bit of a long story sorry, but this has now stretched to nearly 2 months without phone and internet and i desperately need help as i rely on both for my business.
we moved in to our new house in october and ordered BT phone and internet on the 18th of October, we've now had 3 engineers out to connect a phone line but yesterday after the 3rd one turned up, and then left without informing me, i phoned BT to ask where he was to be told i now had to rebook my appointment for the 6th of December, nearly 2 months after moving into my house.
first engineer came on the 8th of november, a very nice man who explained to me the phone line in my house was 20 year old outdated underground line which was no longer in use by BT, he phoned his boss and was told he'd need to put up a whole new line. he went away to get a harness and ladder etc, came back and climbed the pole and got the line up and put it to my house. he then took the whole thing down again... came in to inform me that the line didnt meet regulations as it was not high enough, and he couldnt use the other pole as it was too close to electrical wires. he was gutted to have lost a whole day but informed me it is the law that bt have to provide me with a phone line and that if they dont do anything within 3 days i should complain. i was disappointed as i'd taken the day off work for this, being self employed this cost me a lot of money.
next day i was back to work as normal, a new bt engineer phoned saying he was at my house. i said i'd come back to meet him but he told me not to bother, as he'd already inspected the area and decided the first engineer was wrong and he should have infact put the line up at the pole which was beside the electrical wires, so he told me he'd book a new appointment and bt would phone me to let me know.
i waited a week with no phone call or email so i phoned BT myself on Saturday 16th November. i got a lovely lady on the phone who actually seemed horrified at what had happened, she couldnt be more helpful and managed to get me a cancellation appointment the following thursday, 21st november, from the BT engineers and assured me the order would be completed this time. great, but annoying as again i had to be in the house which meant a 2nd day off work costing me a lot more money again.
21st november - yesterday - bang on 9am a knock at the door, great. new BT engineer is there, an older unfit looking gentleman wrapped up in hats and scarfs and huge jackets. straight away he came across to me that he couldnt be bothered with this, he was asking me what line i had, what the previous guy did, what the 2nd guy said needed doing, he didnt know himself. i explained to him and he went away back into his van. he sat there for 30-40 minutes, came back to the door to say he needed a cherrypicker to get him up the pole to connect the new phone line but as it was in another place it wouldnt be here till the afternoon. he then went on to ask me if i would be staying in all day as it would get done today, he said i needed to stay in the house all day 'you wont be going anywhere will you?' i was told to stay and wait for him over and over again. i said this was fine as i'd had to take another day off work, i couldnt afford a 3rd day so i wouldnt be going anywhere.
come 11.30am, he returned, he just said he wanted to update me on that he was heading into the village to fix a phone line then would return, again he asked for assurances i wouldnt leave the house etc and i said thats fine.
12:15pm - a man phoned from BT to rebook my engineer appointment, i kindly explained he was here at half 11 and was returning to complete the job later. the man on the phone said thats fine but please phone us back if he doesnt reappear. at this point i was very worried, phoned the missus for her opinion and we agreed i should phone back so i phoned back straight away. this time i got a nice scottish man on the phone and i explained everything, he went and checked things for me and said the system still said my order was in progress so if the engineer had told me he'd be coming back, he saw no reason why he wouldnt. i was happy with that and agreed.
3:30pm - still no sign so i phoned BT back to say i was worried he had left, it was a nice man on the phone again but talked in broken english and didnt understand me completely a lot of the time... (i have a scottish accent ) the whole call took about an hour but eventually it turned out the BT engineer had indeed just decided to go home, im presuming he decided it was too much work in the wind and rain, and to add insult to injury he'd even told BT my order was completed. i asked the man on the phone if i could talk to someone higher up as i wish to complain as i needed my order completed today, he point blank refused saying he would file the complaint on my behalf which i wasnt happy with but he wasnt having it any other way. he decided to rebook my appointment for the 6th of december despite this meaning i'd need to take a 3rd day off work costing me yet more money. he then had me wait on the phone whilst he typed out my complaint and gave me a complaint reference number, he didnt really check anything with me as to what i wanted in the complaint so i am a bit worried not everything is in there. i could add more on this, im not happy at having to wait for another 2 weeks aswell considering the last lady found me an appointment within just 4 days of me phoning, i believe i should have priority for an urgent appointment?
anyway, i am very annoyed by this whole thing. i have remained patient up until today and now i just dont know what to do, im not the type to complain but this is ridiculous, i can see the same thing happening with the next engineer. i do expect some form of compensation over this whole affair as it is not fair at all that i will now have to take 3 days off my self employed job which is very very costly for me and is money i can not get back. not to mention the loss in business from not having the internet as we take appointments and orders online, we have been unable to use this for 2 months now. the amount of money i have lost over all of this is unbelieveable. fair enough i did not mind at all having to wait for my first appointment, or for taking the first day off work for the work to be done. that was fair enough, i realise these guys are busy and that was the earliest appointment i could have so that was fine. but now that i have to take another 2 days off work is the problem, not to mention all this extra time with no internet.
please could one of you help me out here as i dont know what else to do. ideally im hoping someone could sort out an earlier appointment for me like the original woman on the phone did, getting me a cancellation, as i am in desperate need of it now as december is our busiest month. i also wish to file my own complaint about all of this if possible. thank you in advance for any help and i am sorry for the length of this post. cheers.
Solved!
Go to Solution.

You will not get any compensation from the failure to provide a residential line, apart from what BT say on this page.
Customer service guarantee
BT do not provide or maintain the external network. This is done by Openreach who work for all service providers. BT do not get any special treatment.
If you are waiting for Openreach to deal, then that appointment is going to be the earliest available.
You could take a laptop into town, and use it on the available hotspots. It would also be worth considering adding broadband to the business line, to make things easier at the shop.
As this is only a customer to customer forum, all I can do is to ask a BT Moderator to see if they can help, but I doubt that they can influence Openreach, as Openreach deal with other service providers as well.
I have asked a moderator to provide assistance, they will post an invite on this thread.
They are the only BT employees on this forum, and are a UK based team of people, who take personal ownership of your problem.
Once you get a reply, if you click on their name, you will see a screen like this. Click on the link as shown below.
Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
For your own security, do not post any personal details, on this forum. That includes any tracking number you are give.
They will respond either by phone or e-mail within 5-6 working days.
Please use the tracked e-mail, to reply, not via the forum. Thanks
This is the form you should see when you click on the link. If you do not see this form, then you have selected the wrong link.
When you submit the form, you will receive an enquiry number, so please keep a note of it
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Problems with installation / de-installation of WAS AS 6.20

Problems with installation / de-installation of WAS AS 6.20
Hello,
is anyone able to help me ?
The installation (started from setup on cd-1 kernel) of sapdb ends by 30 % with following massage:
start massage:
Warning: adaextractlctool_nt_ada InternallnstallationDo
SAPCAR returns with error 29.
Error: adaextractlctool_nt_ada InternallnstallationDo
Phase failed.
Error: Main {}
Installation aborted.
end massage.
massage above percent-banner on the left down-side:
no R3SETUP connected.
In the dos-window in background have been a lot of status-lines during extraction of sabdb-files. Also there have been a successful-massage:
"installation of sap db server finished successfully...." l.
The massage above was shown direct after the massage: "Extracting SAP DB Tools Software"
The Loop-back adapter is already installed (was the first ein did) and the files in win-folder 'hosts' and 'service' are correct (IP and so on)
my system:
Acer Aspire 5100
Ram 1 GB
HD 160 GB (140 GB frei)
Win XP prof.
How can I solve the installationproblem ?
I think, I have to clean my system before starting a new installation-try, because there are already entries in my win-start-button:
a) SAP DB Manager (but behind only a html-Link / no entry DeInstall)
b) a second entry SAP Front End (also behind just a html-link / no deinstall-button)
Under system/controll panel -> software are no entries. So, I`m not able to deinstall the sapdb by win-controll-panel.
And what is with registry-entries ? How can I delete the right entries in the registry. I dont know how to find them.
Another way I tried: on the SAP-CD 1 (kernel) with the file resume_setup.bat I get the same abort during installation I described at the top.
Please, I need help, because I need the system as 6.20 for a trainning.
Much thanks,
Regards, Lars Stolpe
MfG Stolpe

obsolete question ...

N71 freezes when calling busy line

Hi,
I am witnissing since several months the fact, that when I call a busy line, I hear the occupied or line busy signal, then my N71 by itself closes the connection but the busy tone keeps on beeping for up to 3 minutes and all other phone functions freeze. no matter what I do, the phone does not react at all. Very recently I updated the OS, but no change so far.
Does anybody have an idea, what this could be?
thanks for your help
rolfester

I had this problem for years with my N95, N96, E71. To fix this simply turn off automatic redialling. I appreciate this info is probably no more use to you now as you posted the problem in 2007, but it is an ongoing problem so I thought I'd put up the solution for others to see!

Finding of materials in scheduling agreement with more than 150 lines

Dear Experts,
we are in need to find materials in scheduling agreement with more than 150 lines. In standard SAP, materials can be searched only based on item Nos. is there a way we can search by material in ME38. also we noticed that find icon is greyed out in ME38.
Please suggest.
One more request is, to create an uplaod program for maintaining delivery schedules for multiple SAs.
please sugegst if this is feasible.
Regards
Raghavendra MS
9886138875

I am also curious if anyone has found a solution to this problem.
We routinely have scheduling agreements that are hundreds of line items. Users find it difficult to find the line item they wish to work with. It would be helpful if we could search by material number or sort the line items by material.
As Raghavendra mentioned (ctrl+F) functionality is not available in ME33L or ME38.
Thanks.

Possible solution for white C2D iMacs with screen artifacts or lines

I have a white 20" Core 2 Duo iMac with the famous screen artifacts issues. Screen tearing, horizontal lines, goofy pixels, you name it. From my research it seems there are countless others with these problems.
I tried running the SMC fan control app to boost fan speeds. This helped a little, but did not completely solve the issue. A lot of people think these issues are related to heat, and I agree, but only partially. When a graphics chip overheats it is eventually damaged. I have damaged my share of graphics chips while overclocking them in my PCs. In the case of my iMac and maybe plenty of others, I still have issues if the GPU is hot or cold.
I installed WinXP using bootcamp. I finally found an application which will change the clock speed of the GPU on the fly. The X1600 GPU in my iMac has a 475Mhz core speed and 500Mhz memory speed. I cut these down to 400Mhz on the core and 400Mhz on the memory. At these lower speeds I no longer have any issues with screen tearing, horizontal lines, or random crashing. I do still have a few wierd pixels here and there, but they are not all that noticeable and I can live with them.
Now for the fun part. I wanted to permanently fix these speeds into my GPU so when I boot back to Mac OS X, I don't have any issues, and I no longer have to boost fan speeds or run any additional apps. I spent most of today taking apart my iMac, putting DOS on a spare SATA hard drive, and running an external monitor while booting my iMac with the spare drive hanging out the side. All this so I can run ATIflash, and use it to dump an image of the GPU BIOS ROM file.
Well, I ended up finding out the ATI GPU has no ROM to flash. My best guess is open firmware or something like that passes this data on to the GPU when the system boots.
So, in my case slowing the GPU down significantly reduced my problems while running within windows. I am 100% confident slowing the GPU down will also improve issues within Mac OS X, but I have no way to pull this off.
If Apple reads this, or if anyone has any connections at Apple, can we please get an optional firmware update to reduce the speeds of the X1600 GPU? It won't fix all the iMacs with these issues, but it will fix quite a few, and for those out there who don't have any issues at all with their white C2D iMacs, lowering the GPU speeds will most likely prevent damage from inevitably occurring, keeping them a happy customer.
Now, some of you may not like the idea of a slower GPU, but if I have to pick between a slower GPU and an $800 logic board, I will take the slower GPU any day.

There is a little easier Way to Navigate in Doing an F.D.R. than that Method: I listed it here if you prefer going this Route..
2. Re: FACTORY RESET FOR RAZR AN RAZR MAXX

How to add a JPanel with label and border line

hi,
I want a Jpanel with label and border line like this.Inside it i need to have components.Is there a resuable component to bring this directly??
Any solution in this regards.???
Label-----------------------------------------------------------
| |
| |
| |
| |
| |
|________________________________________ |

[url http://java.sun.com/docs/books/tutorial/uiswing/misc/border.html]How to Use Borders

Problem with installation on PIV

I have a problem with installation Oracle 9.0.1 database on my
RedHat 7.1 and 7.2 dist.
My machine is PIV 1.4/768MB/40Gb
On PIII 933/786/40 everethin works fine.
Where is solution for my problem ??

Hello,
PIV isn't problem on Linux. (I am tried)
What is your problem ?
regards
peco

Problem with installation - Augigy

I have a problem with installation on 32bit Vista. Im downloaded newest drivers (SB24_VTDRV_LB__04_0077) and when the installation start, i receive message "A higher version of driver is found in your system, installation will abort.".
Help?

same problem here, is there a possibility zu force installation?

Help! Windows Explorer crashes regularly when using "SharePoint" directory synced with OneDrive for Business

We are using SharePoint 2013 and I want to sync document libraries with
OneDrive for Business with my PC running Windows 7.
In general, it works, but my Windows Explorer crashes very often (after a few minutes) when I navigate in the synced directories and open files there (or copy files into them in Windows Explorer).
How can I find out what happens and how to avoid it?
remark:
We are still using Office 2007, so I installed only OneDrive for Business from the Office 2013 DVD and
deactivated all other components like Office 2013 by hand:
(so for example, the shared office feature or MS Info Path etc. were not installed)
Is there a crash log, where I can find more information about the crash?
Does OneDrive maybe need other components to be installed and can I install them without damaging my existing Office 2007 setup?

Did you check your Event Viewer for any errors during the time when Windows Explorer crashed?
Thanks for this hint!
The Log file says the following, so it seems to be WIDCOMM\Bluetooth Software\btncopy.dll
to be responsible for the crashing Windows Explorer
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-06-27T15:06:31.000000000Z" />
    <EventRecordID>50873</EventRecordID>
    <Channel>Application</Channel>
    <Computer>COMPUTERNAME</Computer>
    <Security />
</System>
<EventData>
    <Data>explorer.exe</Data>
    <Data>6.1.7601.17567</Data>
    <Data>4d672ee4</Data>
    <Data>btncopy.dll</Data>
    <Data>6.3.0.9000</Data>
    <Data>4f85fbda</Data>
    <Data>40000015</Data>
    <Data>000000000002e25e</Data>
    <Data>18bc</Data>
    <Data>01cf9215ab79ee98</Data>
    <Data>C:\Windows\explorer.exe</Data>
    <Data>C:\Program Files\WIDCOMM\Bluetooth Software\btncopy.dll</Data>
    <Data>9e5a534a-fe0c-11e3-90e5-fee5c7d69b69</Data>
</EventData>
</Event>

Office OneNote 2013 working with OneDrive for Business

M$ is going to be the death of me.
So here's what I have Windows 8.1 Pro with Office 2013 Pro with OneDrive for Business with our own SharePoint 2013 environment running on a tablet.
I open this lovely OneNote Product and all it asks me is to sign into my M$ Account, I don't want to use my M$ account I want it to just open and allow me to create a new notebook... It just asks me to sign into my M$ account. I don't want to
do that.
So I got into my SharePoint document library,click New document, create onenote document, open it and OneNote prompts me to log into my M$ account....
I don't want to use my M$ account, I want to use my OneDrive For Business and the SharePoint 2013 environment we've paid thousands of dollars for...
Another funny thing I found is, OneNote 2013 for Mac, works with OneDrive for Business?!?! On Windows? NOPE!
Am I missing something simple?

Hi,
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Delay with installation of business line

Similar Messages

Maybe you are looking for