Delete a buag in SAP CRM

Good morning,
we have the problem, that we created with an code error to much buagu2019s. We solved the problem in the code, but now we need a possibility to delete the buagu2019s.
Is there any possibility in SAP CRM Standard, or do someone have a code example?
Thanks a lot for your help.
Regards,
Sascha

Hi,
This generally happens when a BUILD_TABLE( ) call is missing. Ensure the following in your view controller that holds the table node:
1. If DO_PREPARE_OUTPUT( ) is re-defined, it calls SUPER( )
2. The super call calls BUILD_TABLE( ) method on context node as follows:
me->typed_context-><node_name>-build_table( ).

Similar Messages

Mass Delete of BDocs in SAP CRM system

Dear SDC team,
We like to hard delete some BDocs which are hanging in the txn SMW01 in CRM 5.2 system.
As of now we do not see a option to delete these unnecessary BDocs, as they are in Intermediate state (I04) .
Please tell us if there any standard report which can be used to do Mass Delete of BDocs in SAP CRM system.
Or Is there any Tables which need to be emptied .
Please help ..Points would be rewarded .
Regards
Ritvij

hi
Concerning the BDOCs without error, there is a job that you can schedule to run daily that cleans the BDocs processed without errors from the database.
The details of this job are:
Job name: SMO6_REORG
Job program: SMO6_REORG
Variants: SAP_MW_REORG
Trace data (days to hold): 7 (recomended by SAP)
Trace log (days to hold): 7 (recomended by SAP)
Period: daily.
Besides i should tell you I looked through Help and there are no best practices that I could find.We went through this process at one of my clients. They had 40,000 pluserror'd BDOCs and thousands of processed ones. The Middleware guycreated a program to delete the BDOCs that were over 2 months old andhad completed successfully to prevent the further build up of theseBDOCs. SAP Help says they are marked for deletion after they areprocessed, but it doesn't look like they get removed as wanted..
From SAP Help:
Deleting Processed BDoc Messages
1. Processed BDoc messages cannot be archived.
2. BDoc messages that have been processed successfully are marked fordeletion.
Procedure
To delete processed BDoc messages choose Architecture and Technology >Middleware > Message Flow > Delete Processed BDoc Messages
The messages you selected will be deleted.
and regarding deletion of non errant Bdocs
Usually there are two schools of thought on this issue:
1) Make the hard decision to go back to the beginning and startcorrectly all the things that caused these to error out (bank codes, taxcodes, config on R/3 side but not on CRM side, etc.). Then these can bereprocessed and everything will be brought up to date in the system.This takes time and may neccesistate hiring a Middleware resource for ashort term to help go through the process. The big part of this isidentifying those config items that are out of synch between R/3 andCRM.
2) The other way to handle these is to go through the errors quickly,gain an insight into the cause of the errors, and correct the bigthings. Delete all the old error'd BDOCs and then bring down all the bigitems again - BPs, Sales orders, products, and so forth. This is muchfaster process, but has it's own risks and problems vs Option 1 above.As these items come in, if you haven't fixed the config problems, theywill error out again. It's a fix and move - fix and move process. In theend you may have some missing data still, but the time commitment ismuch lower. You just need to get leadership's buy-in to this process.
Those error'd BDOCs are a problem and point out all the datainconsistencies that exist in the system. They are also a drag onperformance and need to be processed one way or another. After that,keeping them under a "1000" number is imperative. If you don't, theproblem will get away from you again.
finally Some Transaction Codes that people might find useful for working withBDOCs:
SMW01 Display BDocs
SMW02 Display BDoc Summary
SMW02A BDoc Messages: Show Top N Errors
SMW03 Show stats of unproc. BDoc messages
SMW10 Bdoc structure chekker
SMW19 Copy BDoc and process
SMW20 Process BDocs
SMW3EX1 Flow Carrier Example
SMW3FDBDOC Maintain Bdoctype dep. Flows
SMW3FDCUST Maintain Customer Flows
SMW3FDIF Maintain Bdoctype dep. Attributes
SMW3FDSTD Maintain Standard Flows
SMW3RBM Convert BDoc Messages to XML
SMW3RC BDoc Message Error Recovery
SMW3RCW BDoc Message Error Processor
SMW3STOP1 General Stop Configuration
SMW3STOP2 BDoc Type Stop Configuration
SMW3WD Watchdog for failed BDoc Messages
SMW3_00 BDoc Type Settings
SMW3_GSB Generic Bridge Activation
SMW3_GSB2 Generic Synch. Bridge Configuration
SMW3_GSB_SHOW Display Generic Synch Bridge Config
SMWMBSTATDISP BDoc statistics
hope info will help your cause,i told all this coz before deleting the Bdocs complete understanding of the errant and non errant Bdocs is necessary,
best regards
ashish

Cannot Delete BP Relationships in SAP CRM 7.0 - intermittent error

Hi Everyone,
We are running SAP CRM 7.0, SP08. We are trying to delete just the relationship "Contact Person" between an Account and a Contact in CRM. Sometimes when we do it everything works just fine and the relationship is removed in CRM and the Contact Person is deleted in ECC. Other times we are getting the following error: "Address is still being used and may not be deleted." If we expand the error, we are getting the following:
Diagnosis
You tried to delete a BP address. This BP is still being used somewhere in the system, meaning that you are not permitted to delete this address.
System Response
Error message. The BP address is not deleted.
Procedure
Look at the where-used list for the BP address. If you still want to delete the address, change the reference to this address in the applications affected. In most cases, if applications other than maintenance of business partner itself are affected, you can navigate directly to the corresponding application from the where-used list (by calling the context menu with the right mouse button). You can then try again to delete the BP address.
Note
If a business partner is merely moving, you only need to change the actual address details. All references are automatically transferred to the new address.
We have tried several scenarios and have not found a consistent result. For example, we can create Activities in CRM, Quotes and Orders in ECC, using the Contact, and then when we remove the relationship it all works as we expected and removes the relationship in CRM and deletes them in ECC. However, for another Contact this does not work. It does not seem to matter if the person is the "main contact" in ECC or not, whether we have flagged them as the Main Contact in CRM or not, whether they have lots of transactions or none. The only thing that does seem to be consistant is where they were created and the relationship defined. It seems if they were created in ECC it does not work, but if they were created in CRM it does work.
I looked at SAP note 830239, but it does not apply to CRM 7.0.
Any help in this regard is appreciated. Thanks for your time.
Bryan

Hi,
We used the questionnaires (questionnaires was displayed and worked) but we faced issues with the display in web UI (only when the questionnaires are linked to an activity/opportunity). The Admin screen for questionnaire works well).
We have implemented the following notes in order to correct this displaying issues :
- 1858059 : Upload the CRM_SVY_GENERATE_BSP_TEMPLATE.ZIP, refresh cash and generate all surveys
And then notes mentioned above
- 1914885 & 1944288 in the relevant order.
But we cannot display anymore the existing surveys (They are active, all scenarios are flagged).
Error message : Cannot get questionnaire HTML string
Any Ideas how to proceed to solve ? (we work on EHP2)

How to delete the sales org information from BP Master Data in SAP CRM 5.0

Hi Guruu2019s
How to delete the sales org information from BP Master Data in SAP CRM 5.0
Thanks...
Mahesh Pasupunuri

Hello
There is a report attached to [SAP Note 725857|https://service.sap.com/sap/support/notes/725857] that performs the deletion.
Regards
Joaquin

How can we delete prospects from SAP CRM

Hello All,
How can we delete prospects from SAP CRM in back ground for a list of selected BP's.
Thanks,
Raj.

Hi Raj,
You can use tx BUPA_DEL to delete the BP's you don't need anymore.
Cheers,
Heber Olivar

SAP CRM - no confidence in UI by SAP?

After reading this blog and looking at the article attached to the blog. I had an interesting question:
Can Rich Internet Applications finally be accepted as a credible application development platform for SAP?
Does SAP have any confidence in its own CRM software? Right now SAP is touting how easy to use the new version of SAP CRM is, and yet this article implies they don't use their own product's user interface.
Now I know the eSOA mantra says this shouldn't matter, but I would say this is one of those cases where it doesn't. If the vendor won't/can't use their own CRM software because the UI is too ugly/clumsy or other reason, why should I as a customer.
As a customer I don't want to purchase a CRM software and then have to purchase a better UI to go on top of the software. I might as well spend the money on software that might have a better UI perceived by my sales folks(think siebel, salesforce.com, sugarcm, etc), and spend those dollars on integration instead. It's a lot cheaper to do integration work, than completely rewrite the UI to meet my users needs.
I'm also wondering why SAP would even send this message by displaying this article on SDN? I'm sure if the guys at oracle saw this article, we would see a press release from that says something of the like:
"Even SAP acknowledges, that SAP CRM is too difficult to use".
I bring this up because we are selling use of SAP CRM 2007 in house right now, and it makes it harder for me to sell the solution to my business users, if there are conflicting messages on the market.
Take care,
Stephen

> Wow, you almost have the "nightmare" scenario when it comes to maintenance. I just have to ask what functional areas (high level) did you implement? Was it the marketing module?
I can tell you...
We were using Mobiles Sales with activities, campaigns, sales documents and master data and we switched that to CRM 2005 and Portal (+ adding BI reporting functionality with BI-CRM content). For the Java part there's enough said (by me) already, I won't start again with that (mess). The CRM looked pretty well at first sight but devil's in the detail.
> The marketing module in CRM 40 was so unstable on SP08 that basically we ditched the application and wrote something custom in the SAP GUI instead. Any t-code that had over 400 related notes(segment builder) is just a nightmare not to mention just plain bugs in the PCUI that we weren't willing to wait a month for fixes.
Well.. people have always be VERY helpful, especially the guys and girls in India were doing a very good job at fixing bugs - once the communication was done via email and not via phone...;) But you're right - it's taking sometimes too much time to get a fix and yet-another-note.
> I still think the SAP GUI sometimes beats the web based interfaces, once you learn how to use it. The problem was that everyone got obessed with zero-client installations and forgot about the benefits of "specialized" clients. Now everyone is basically trying to make a web browser work like a desktop client, which puts you back full circle.
Everyone THINKS it's zero installation but in fact you have to configure proxy exceptions, add/install certificates, enable/disable Javascript things, add trusted sites, (re-)configure firewalls on Laptops, delete browser caches, install SVG viewer and other "plugins", install and maintain security fixes for the browser etc. etc. and this on a distributed environment where our sales reps are spread over the whole world in different time zones. So the "zero-installation" is nothing but marketing flowery because the maintenance you needed to put into Mobile Sales is now needed for the browser - nice antagonism
> In would have been interesting to see how well SAP would have fared if they had made the mistake of making the original R/3 application 2-tier instead of a 3-tier client/server.
It's been like that @ R/2 times and I must tell you I loved the green screens (http://www.sapdesignguild.org/resources/images_hist/R2-0.GIF and http://www.sapdesignguild.org/resources/images_hist/SCREENO1.GIF)
Markus

Archiving/Deleting Test Messages in SAP Solution manager

Hi,
We have configured Service Desk in our solution manager 7.0 with EHP1 system.
We have created test messages to test the configuration.
We need to delete these test messages which are appearing in T Code CRM_DNO_MONITOR.
We run the report "CRM_ORDER_DELETE" but the output is
Deletion of CRM Documents
The following document could not be deleted:                 8000000259
Not possible to delete, a reference exists to a subsequent document
Number of documents deleted:                                          0
Number of documents not deleted:                                      1
So
We have followed the "Note 1329247 - Archiving Solution Manager Service Desk messages".
1)
a)Call transaction DNOTIFWL and set the deletion flag for the Service Desk message. The deletion flag corresponds to the system status I1076 (deletion flag).
b) Execute the report Z_DELETE_BASIC_NOTIFICATIONS
The above step we have executed successfully.
2)
In CRM
You cannot delete a service process in CRM. The service process must be archived.
Call transaction SARA and select the archiving object CRM_SERORD. Archiving involves three steps:
a) Initial run     Report CRM_ARC_SERORD_CHECK
b) Write run       Report CRM_ARC_SERORD_SAVE
c) Delete run     Report CRM_ARC_SERORD_DELETE
in SARA T Code we have typed archiving object CRM_SERORD.
After this what to do??? How to proceed further.
Can any body suggest us the step by step procedure to archive these test messages.
Regards,
Raj

> In CRM
> You cannot delete a service process in CRM. The service process must be archived.
> Call transaction SARA and select the archiving object CRM_SERORD. Archiving involves three steps:
> a) Initial run     Report CRM_ARC_SERORD_CHECK
> b) Write run       Report CRM_ARC_SERORD_SAVE
> c) Delete run     Report CRM_ARC_SERORD_DELETE
>
> in SARA T Code we have typed archiving object CRM_SERORD.
> After this what to do??? How to proceed further.
You need to schedule a BGD job to execute this. You can do this from the SARA screen itself, clicking on the 'Job' button. Please refer:
http://help.sap.com/saphelp_crm50/helpdata/en/e6/c66f3b6c980c3be10000000a11402f/content.htm
Rajeev

Filtering My Open Task in SAP CRM based on Status, Transaction & Partner Function

Hello
Whenever i create a Task in SAP CRM, it displays that transaction in the My Open Task of all Business Partners involved in that Transaction.
I want to restrict the My Open Tasks based on Transaction Type, Status and Partner Function.
1) The system should work as it is for all other Tasks but for my Custom Transaction Type the logic should be based on status of the Transaction
2) When My Open Task component is prepared the system should consider the Status and Partner Function as well i.e. if the status is Approval of Manager, the system should show the Open Task only to the Manager and not other parties.
3) if the status of the Transaction is Open, the system should only display this Transaction / Task only to Employee Responsible and not to Manager and other people involved in their My Open Tasks.
I have gone through the following post in SCN:
https://scn.sap.com/thread/2056959
I have implemented the method DO_PREPARE_OUTPUT as per the post but it does not do anything. When i redefine the method GET_QUERY_RESULT and remove everything,it does not prepare any list.
If possible please specify which method needs to be redefined in the component/view CRMCMP_GS_WC/TodaysTasks & if possible please share the code that needs to be maintained in that method.
Thanks

Hi,
Method DO_INIT_CONTEXT should be redefined
This should be redifined to get the collections with your required filter criteria.
* get the collection of entities for the tasks
lr_col = get_query_result( gc_status-open ).
If this does not help, Delete the collections which are not required after above selection but before this code.
me->typed_context->resultnew->collection_wrapper->set_collection( lr_col ).
Thanks
Ajay Singh

Help needed in transferring IDoc from SAP CRM to XI

Hi All,
We are facing an issue in sending an IDoc from SAP CRM to XI system. The IDoc is triggered and the status is showing as 03 in SAP CRM system(WE05 is used) but it is not getting replicated in XI System. This is verified by logging into XI System and cross checked the records retrieved by executing the transaction IDX5. No entry is found for this IDoc.
In SM58 transaction, it is giving the status text as EDISDEF:Port SAPRIO segment defn E201CRMXIF_BILLI.
Any pointers on this issues will be very helpful. We are able to send information from XI to CRM.
The project is an upgrade one and the IDocs are developed earlier and were working fine one week back and no changes were made recently.
Thanks,
Udaya

Hi Kapil,
Thanks a lot for your help. We need to delete and recreate Metadata. This is a typical problem that is encountered during upgrade projects.
Thanks,
Udaya

Order not available in ECC6.0 where as the same order is in SAP CRM?

Hi SAP Experts,
I have come up with one issue as follows:
I have changed the sales order in SAP CRM and when i try to open the same document in ECC 6.0 in TCode:VA02,it is directing to logon screen with user ID and Password.When i input my logon details and enter , it is now directing to VA02 screen with error as " sales Document Cannot be blocked" and the error info shows as " document may be archived in CRM".
In VA03 ,i can access the order but in VA02 this problem is occurring.This only one order is having the problem and other orders i can access and change in VA02.
I would appreciate providing the solution.
Thanks in advance.
Best Regards
Succhi

Hi Succhi,
Since your document is changeable in CRM then report CRM_CHECK_DISTRIBUTION_STATUS wont fix in this case but just in case you need the report in the future you enter the object ID which you can get in table CRMD_ORDERADM_H and the transaction type. To update the status you uncheck the P_CHECK field as this just runs in test mode to see if the document status needs updating.
The orders have the status I1056 - transfer_failed. If the order have this status we don't delete the csl reference because the order can only changed in the crm system and should be not changed in the r/3 system. Does your document in CRM have this status? If there are no unprocessed queues then you can manually delete the CSL lock in ERP but this should only be an exception and not part of normal processing.
Kind regards,
Vanessa

How to retrieve date from a set type in SAP CRM in BRF+ application

Hi,
Can anybody please let me know how can I retrieve date from a set type in SAP CRM to BRF+.
I need to process the data in BRF+ and then send it back to CRM. Thanks.
Regards
Yogesh

Hi Manish,
From my experience, you cannot change an existing attribute of a set type (esp. when it has a dependency).
You need to delete the attribute, save the changes and then re-create the attribute with new value table.
Also remove any dependencies before deleting the attribute.
Regards,
Vartika

SAP CRM SERVICE IC WEBCLIENT E-MAIL RESPONSE SYSTEM

Hi
I am new to WEBIC. I am in CRM SERVICE. I want to generate a E-mail to send to the customer automatically with respect to the SLA(Service Level Agreement). With respect to the time delay from Service Ticket(Incident Registration). If the delay is 4hours it should send automatic message with 100%DELAY. If it is 2hours it should send automatic message to customer with 50%DELAY. Can to tell me how to generate E-mails and how to caliculate 50% and 100%. Is I need to insert mathematical expression in any where? Please let me know step by step. Is I need to Define Service, Assign service Manager Profile, Define Repository? let me know clearly. Thanks a lot.
Shrik.

Hello Piotr,
Ok, then that explains it! If you are using ICI, then the emails are stored on the external email server and not in SAP CRM. The Interaction Record in CRM contains a pointer to the email on the server. But if you delete or archive the emails from the server, then you will get the error message in the IC. This is completely dependent on how you configure your external email server. You can certainly have access from the IC, but you need to configure your email server to keep the emails for the desired length of time (i.e., until you archive the Interaction Records in IC).
The other option of couse is to use SAPConnect and the Agent Inbox with or without ERMS (or alternatively SAPConnect and ERMS Push) in which case the emails are stored in the SAP CRM system rather than on the external email server.
Warm regards,
John

Importance of Bounce management functionality in SAP CRM

Hi All,
I want to discuss few interesting issues which I have come a cross while doing a setting for bounce management functionality in SAP CRM 7.0
Before sharing my experience I want to discuss some term related to Bounce email than will discuss about types of bounce emails and cause of the bounce email.The setting of bounce functionality is describing in below link .
http://help.sap.com/saphelp_crm700_ehp01/helpdata/en/46/3f509215835fa7e10000000a1553f7/content.htm
In general when a website visitor sigh up they receive email from the company site, the information the site collected saved in the database but It commonly happen some of your email will be undeliever. In marketing term we say it as 'Bounce'. this is the same way happen as when a person give a bank cheque to bank and don't have sufficient money to his/her account the bank people say the cheque got bounce ..
As we are aware emails are bounce for variety of reason such as.
     - In case the recipient email address is invalid.
     - recipient email address is inactive or closed
     - recipient mailbox is full or mail server have some technical issue etc
In general all these bounces emails categorize in two category.
Hard bounce- When email address is not active. example wrong email address, email address de-activated, deleted,or closed
Soft bounce- recipient mailbox is full, mail server have some technical issue, Out_of_office is setup .
Now finally we come to know about the cause of bounce email and types. Now the question arises why this is so important when we have bounce management functionality active in sap crm marketing ? as described in above url.
suppose that there is a campaigning happening for an product where 3000 person visited it. Now incase 2000 visitors shown interest so have qualified as prospect bases on the information they have provided such as name, address, salary or employment detail.
After successfully execution of campaign now senior executives create a mailing list for all the prospects in the target group of campaign and sends email to all the users.Now if I say to how many customers really company have reached reached after campaign execution answer will be we can not have the correct fact and figure as there could be some bounce happened.
Now incase bounce management setting is configure in your CRM system than system will receive inbound e-mails for each bounce.Suppose we have received one thousand bounce emails than we would say actual customer contacted is 1000. this is the correct fact and figure and very much useful for marketing people.
After than executive could remove email address which were hard bounced and for soft bounce they can use some other channel to contact like telephone calls etc to reach them.
The correct facts and figures are very much important for marketing strategy and planning and also to know success level of each campaign. Assume a scnario where in day a company launches more than 5 campaign. I feel the importace is transparent now.
I hope you would find some interest in above blog.
Thanks
prem

HI, Sreedhar
Check this thread:
Re: New search help on CRMD_ORDER locator
Denis.

Problem while import u201CSAPKU60003 & SAPKNA7013u201D into SAP CRM 2007

Gentlemen,
I have a problem while import u201CSAPKU60003 & SAPKNA7013u201D into SAP CRM 2007,
My current Support Package Level is:
SAP_ABA      700     0015
SAP_BASIS     700     0015
PI_BASIS      2006_1_700     0006
ST-PI     2005_1_700     0006
CRMUIF         600     0003
SAP_BW      700     0017
SAP_AP                700     0012
BBPCRM                600     0002
First I had the following error:
   Syslog: k CQ3 : UMGSETTING&                                          rscpexcc 12
   GetDBMigrateCodePagesLangs uses TCP0D, TCPDB, TCP0C.
     0 entries from FUNCT (%/SAPCND/CNF_GET_RECORD_FROM_DB%) deleted.
     0 d /   0 i /   0 u /   6 = 100% ucf FUPARAREF
     6 entries for FUPARAREF imported (/SAPCND/CNF_GET_RECORD_FROM_DBA*).
     0 entries from RODIR (FUNC/SAPCND/CNF_GET_RECORD_FROM_DB) deleted.
     0 entries from RODIR (FUNC/SAPCND/CNF_GET_RECORD_FROM_DB) deleted.
     0 d /   0 i /   0 u /   1 = 100% ucf TFTIT
     1 entry for TFTIT imported (D/SAPCND/CNF_GET_RECORD_FROM_DB*).
   successfully set a temporary lock on table REPOSRC
   REPOS /SAPCND/LDETERMINATION$14                A replaced.
   REPOS /SAPCND/LDETERMINATIONU14                A replaced.
    [dev trc     ,00000] Wed Nov 26 16:33:14 2008                         1315447 8.171484
    [dbdsoci.    ,00000] *** ERROR => invalid offset 0 for placeholder 16
                                                                                71 8.171555
   unsuccessful statement: EXEC SQL: SELECT ID,OBJECT,LANGU,TYP,VERSION FROM DOKIL WHERE (LANGU IN (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,
   dsql_open returned with unexpected error code 2
   Please contact the SAP support.
   End of Transport (0016).
   date&time: 26.11.2008 - 16:33:14
   5 warnings occured.
   3 errors occured.
   Main import
   End date and time : 20081126163314
   Ended with return code: ===> 16 <===
After I got this error I upgraded the Kernel from patch level 159 to 179,
After that I restarted the update again but the system is still running on u201CIMPORT_PROPERu201D and dose not given any update,
From Import logs of the queue I can see the following,
   Summary:
    24 DOCUT imported.
    16 DYNPS imported.
    30 DYNPT imported.
   387 REPOS imported.
    43 REPOT imported.
   Totally 505 Objects imported.
   Totally 3636 tabentries deleted.
   Totally 14 objects activated.
   Totally 12229 tabentries imported.
   62066888 bytes modified in database.
    [dev trc     ,00000] Wed Nov 26 18:14:19 2008                         20996974 40.917838
    [dev trc     ,00000] Disconnecting from ALL connections:                   30 40.917868
    [dev trc     ,00000] Disconnecting from connection 0 ...                  287 40.918155
    [dev trc     ,00000] Closing user session (con_hdl=0,svchp=00000000003005B8,usrhp=00000000002FB748)
                                                                              5759 40.923914
    [dev trc     ,00000] Detaching from DB Server (con_hdl=0,svchp=00000000003005B8,srvhp=00000000061530E8)
                                                                                921 40.924835
    [dev trc     ,00000] Now I'm disconnected from ORACLE                    8230 40.933065
    [dev trc     ,00000] Disconnected from connection 0                        90 40.933155
    [dev trc     ,00000] statistics db_con_commit (com_total=527, com_tx=307)
                                                                                59 40.933214
    [dev trc     ,00000] statistics db_con_rollback (roll_total=0, roll_tx=0)
                                                                                52 40.933266
   Disconnected from database.
   End of Transport (0004).
   date&time: 26.11.2008 - 18:14:19
   2 warnings occured.
   Main import
   End date and time : 20081126181419
   Ended with return code: ===> 4 <===
Please advice me.
Regards,
Ahmed

I have similar problem while updating support packages in SAP R/3 4.6C environment.
000 unsuccessful statement: EXEC SQL: SELECT ID,OBJECT,LANGU,TYP,VERSION FROM DOKIL WHERE (LANGU IN (?,?,?,?,?,?,?,?,?,?,?,?,?,?,
000 dsql_open returned with unexpected error code 1
000 unsuccessful statement: EXEC SQL: SELECT ID,OBJECT,LANGU,TYP,VERSION FROM DOKIL WHERE (LANGU IN (?,?,?,?,?,?,?,?,?,?,?,?,?,?,
000 dsql_open returned with unexpected error code 1
Here is an outline of series of events that happened:-
We are applying in support packages in SAP R/3 4.6C HR Development
(TFI) environment. We planned with installing all the SP stacks
starting from 1 to 9.
-Updated kernel, tp , r3trans and SPAM level to latest level.
We received the following error in Import_Proper step of Support
package upgrade. Though the step has been repeated after making sure
that we have all the required files at OS level, we go this error
repeatedly.
Main import
Transport request___: SAPKB46C52
System______________: TFI
tp path : tp
Version and Release: 305.13.25 46D
check-sum error in datafile after 9374854 bytes.
Main import
End date and time : 20081205192603
Ended with return code: ===> 16 <===
When we renamed Co-File & data_file at OS level to see if the files are
created again and reran we got the following error.
Main import
Transport request___: SAPKB46C52
System______________: TFI
tp path : tp
Version and Release: 305.13.24 46D
Main import
End date and time : 20081205185117
Ended with return code: ===> 12 <===
We tried importing the individual support package SAPKB46C52 from STMS
and the transport cancelled at an earlier step with the same error.
Dictionary import
Transport request___: SAPKB46C52
System______________: TFI
tp path : tp
Version and Release: 305.13.25 46D
check-sum error in datafile after 9374854 bytes.
Dictionary import
End date and time : 20081205195929
Ended with return code: ===> 16 <===
While playing around I have deleted the transport from the tp buffer
and added manually, before doing so I made a backup of tp buffer at OS
level and I got following error though I reverted back to backed-up
copy.
- Error in phase: IMPORT_PROPER
- Reason for error: TP_BUFFER_INCONSISTENCY
- Return code: 0008
- Error message: Wrong sequence of Packages in the tp buffer (e.g.
SAPKB46C52 )
I then tried to disassemble the package separately and reran the
import queue. Now I have RC 8 on that support package.
When I did R3trans -l on the datafile it completed successfully.
D:\>R3trans -l \usr\sap\trans\data\RB46C52.SAP
This is R3trans version 6.05 (release 46D - 27.10.08 - 16:32:00).
R3trans finished (0000).
I verified the size of file "CSR0120031469_0023301.PAT" and it is the
same as mentioned in SSP.
Let us know is there is a workaround.

How to make a sales order item deleted in ECC while in CRM just status changed?

Hi expert,
I have a requirment, that is:
1. the user will change the USER STATUS in a line item of sales order to "CANCEL".
2. When the order was replicated to ECC,the item should be deleted totally and the ITEM in CRM should not be affected.
How can I implement this? Is there any resolution by just make some configuration?
Thanks in advance.
Jerry

Hi Jerry,
As per standard SAP, the line item is not deleted (in ECC) based on the status changes at the line item (in CRM)
You need to do the development to achieve this. Following points to be considered if you are doing any custom enhancement.
1. What triggers the sales order replication ? Is it status change at header level ? If yes, then you need to define a program which will first check the line item status in CRM Sales Order.
2. Wherever a line item status is CANCEL, it may store in some internal table and then it will call an RFC to delete these line items in the replicated ECC Sales Order. (without deleting the line items in CRM Sales Order)
3. Mind you that, this will be a complex enhancement and may give lot of challenges in the sales order replication to ECC.
Drawback of this requirement -
1. If your client prefer to have this scenario, then it is fine, but I could see the data inconsistency in all such sales orders. There will be a mismatch between the sales order in ECC and CRM
Hope this will be useful
Thanks and Regards
DJ

Delete a buag in SAP CRM

Similar Messages

Maybe you are looking for