Delete a record in MDT Database from WinPE during Pre install

Hello Experts,
This is my requirement
1) MDT Deployment database will be updated with MAC address of new laptops.
2) All new laptops will be pre-configured with PXE booting as primary boot option. (When the MAC address is not available on Deployment DB, System boots via hard disc).
3) Deployment Tool Kit (MDT) will deploy the image to all the MAC addresses available on deployment DB (Step 1)
4) After deployment, database entry for corresponding laptop should be deleted automatically such that system boots via hard disc
Is there any way to delete a record from MDT database in Pre-Install step of the task sequence, such that Laptop boots from the hard disc after restart from PE install? Idea is to delete the record of corresponding laptop after PE install such that PXE boor
doesn't pick up anything from the share.
Regards, karthik.

Basically, this would be the same effect if you have a PXE advertisement for a certain number of machines. And your PXE advertisement is always mandatory, except you only want to install machines which occur in the database. Why no try to solve it in another
way? Because this is very devious.
If this post is helpful please click "Mark for answer", thanks! Kind regards

Similar Messages

Delete old records in oracle database using jobs

Hi,
will it be possible to delete old records in oracle database using jobs
need to delete old records on weekly basis and rebuild my index.
Thanks!

933633, While it is possible to do a great deal with the dbms_scheduler your shop should have a scheduler like CA Unicenter that is used to run the application job schedules. Purge jobs should probably be part of the normal application schedule rather than contained in the database, if your shop has a scheduler in use.
As far as rebuilding the indexes after the purge keep in mind that freshly rebuilt indexes often have to split when inserts are performed due to the fact the compacted index blocks do not have room to hold the newly inserted keys in the appropriate locations. So just because you purge weekly does not automatically mean the indexes should be rebuilt weekly. You need to look at the index key DML pattern and at the total percentage of the index that is held by deleted rows.
HTH -- Mark D Powell --

Delete the records in a table from forms

Oracle forms6i
Hai All
I am using forms6i and my need is i have generated a forms and the output is viewed through tables and i need to to delete all the records in the table from my forms while executing next time pls tell me
Regards
Srikkanth.M

hi
please try something like this.
Begin
Delete From Master_Tbl Cascade;
forms_ddl('Commit');
End;sarah

Drivers from various HP pre-installed software

Hello,
I Have an HP ENVY 6 1040EW Ultrabook.
Because I had issues with my windows system I had to reïnstall windows with disks because a manual factory reset was not possible because of dammaged drivers.
There where no disks for this particular laptop so i had to use normal windows 7 recovery disks.
My problem:
I recovered Windows 7 with my recovery disks and ofcourse my old pre-installed software was not on my PC.
But I really liked HP coolsense, Beats Audio, HP connection manager and the HP service software to store safely my usernames and passwords. But I can't find the software on the HP website.
Tnx for reading and answering my question.
Greetings,
Bart

Hi, Bart:
See if this IDT audio driver from your PC's support page installs the Beats software too.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107829-1&cc=us&dlc=en&lc=en...
Coolsense:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-113328-1&cc=us&dlc=en&lc=en...
Connection mgr:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-131501-1&cc=us&dlc=en&lc=en...
Unfortunately, I am not familiar with the HP service software you are referring to.

Inserting multiple records into a database from a table

I have a dynamic table with rows upto 10. i am trying to insert all the records in these rows into a database ( msaccess)
table name: Table1 ( in my form )
Database table : movies_comments ( as posted in stefan's forums ).
table columns: username, movieid, comments
i am using the following code.
Database.ExecSQL() function is as posted in stefcamerons forums.
var tlength = xfa.resolveNode("form1.#subform[0].Table1.Row1[*]").length;
xfa.host.messageBox("tlength is :" +tlength);
for ( var i = 1; i <= tlength; i++)
var username = xfa.resolveNode("form1.#subform[0].Table1.Row1["+i+"].user_name").rawValue;
var movieID = xfa.resolveNode("form1.#subform[0].Table1.Row1["+i+"].movie_id").rawValue;
var commentS = xfa.resolveNode("form1.#subform[0].Table1.Row1["+i+"].comment_").rawValue;
Database.ExecSQL("INSERT INTO movie_comments (username, movieId, comment) VALUES ('username','movieID', 'commentS');");
i am trying to insert multiple records using the code above. But i am getting error
GeneralError: Operation failed.
XFAObject.resolveNode:1:XFA:form1[0]:#subform[0]:Button1[0]:click
SOM expression returned list when single result was expected
suggest me an alternate way to insert multiple records from a table into a database.
thank Q

figured it out. I changed the ...OR (alternative names = colname) in the recordset to ...OR (alternative names LIKE %colname%). Works like a charm now- the result of a good night's sleep.

[SOLVED] pacman error: database not found (during an install)

i am trying to install an app
when installing
# pacman -S /path/to/dir/app.tar.gz
error: database not found
when i look inside the tar, theres only one file, app.bin
im sure its some fundamental that im missing. so i have to makepkg first , or am i missing a command during the intallation, or is the file broken?
Last edited by wolfdogg (2011-06-04 05:50:09)

well, im geting some errors with the program, im wondering if i need to make a package? i think i will try that next.
heres the beginning of the log, Java errors mainly
eclipse.buildId=unknown
java.version=1.5.0_11
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=linux, ARCH=x86, WS=gtk, NL=en_US
Command-line arguments: -os linux -ws gtk -arch x86
!ENTRY org.eclipse.equinox.ds
!MESSAGE
!STACK 0
org.osgi.framework.BundleException: The bundle could not be resolved. Reason: Missing Constraint: Import-Package: org.eclipse.equinox.internal.util.event; version="1.0.0"
at org.eclipse.osgi.framework.internal.core.AbstractBundle.getResolverError(AbstractBundle.java:1313)
at org.eclipse.osgi.framework.internal.core.AbstractBundle.getResolutionFailureException(AbstractBundle.java:1297)
at org.eclipse.osgi.framework.internal.core.BundleHost.startWorker(BundleHost.java:309)
at org.eclipse.osgi.framework.internal.core.AbstractBundle.resume(AbstractBundle.java:370)
at org.eclipse.osgi.framework.internal.core.Framework.resumeBundle(Framework.java:1068)
at org.eclipse.osgi.framework.internal.core.StartLevelManager.resumeBundles(StartLevelManager.java:557)
at org.eclipse.osgi.framework.internal.core.StartLevelManager.incFWSL(StartLevelManager.java:464)
at org.eclipse.osgi.framework.internal.core.StartLevelManager.doSetStartLevel(StartLevelManager.java:248)
at org.eclipse.osgi.framework.internal.core.StartLevelManager.dispatchEvent(StartLevelManager.java:445)
at org.eclipse.osgi.framework.eventmgr.EventManager.dispatchEvent(EventManager.java:227)
at org.eclipse.osgi.framework.eventmgr.EventManager$EventThread.run(EventManager.java:337)
ok, i downloaded a different binary of this program, and it installed successfully. thanks for the help
Last edited by wolfdogg (2011-06-04 05:49:37)

How to put records in database from java coding?

I want to insert records in the database from java code. Please help me out. Can i get a sample code for that.

Google for JDBC tutorial. (...or read about hibernate)
Kaj

Error in deleting a record

I am using Oracle Driver and try to delete a record in the database, fail
error occurs, saying "Invalid operation on read only resultset". But I have
already set the resultset as updatable, what am I missing?
Please give me some hints?
statement = connection.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE,
ResultSet.CONCUR_UPDATABLE);
resultSet = statement.executeQuery("Select * from emp");
... // move to a record position
resultSet.deleteRow(); // Error occurs when I perform this operation

No, closing has nothing to do with committing!
If you have done nothing like
"connection.setAutoCommit( false)", then you are in
AutoCommit mode, means each stattement is handled by
JDBC as a 1-step-transaction and automatically and
immediately commited.By default, new connections are in auto-commit mode. The commit occurs when the statement completes or the next execute occurs, whichever comes first. In the case of statements returning a ResultSet, the statement completes when the last row of the ResultSet has been retrieved or the ResultSet has been closed.
So, closing has an effect. Please look at the thread
http://forum.java.sun.com/thread.jsp?forum=48&thread=189922
Am I wrong in my observation?

Simply delete all entries in a database.

Hello,
how do I simply delete all entries in a database (which must be thread safe, and most probably is)? For instance it is needed, as I'm developing a versioned open source XML/JSON database system, whereas I'm using a BerkeleyDB environment/database as a transaction log per revision (resource/log/version_number/...) for dirty blocks/pages and now want to introduce checkpointing (with currently only a single write-transaction per resource). That is another reading transaction (possibly another thread might read a transaction log, a BerkeleyDB environment/database while another thread, the checkpointer (most probably a deamon thread) commits, that is writes the log periodically or during less workload into the real resource. After the data is commited, the transaction-log must be emptied, but probably a reading transaction still reads from the log and falls back to reading from the real resource if the page is not in the log. That is I can't remove the database, but probably simply have to delete all entries and a simple .commit-file flag which indicates if the data has been written back to the real resource or the checkpointer must be writing it back sometime in the future (if the .commit-file still exists). Do I have to iterate through the database with a cursor (and .getNext())? Or does a dedicated method exist?
kind regards
Johannes

Hi Johannes,
As I think you've already discovered, there is no built-in method for deleting all records of a database that is open. The only similar built-in methods are those for removing or truncating an entire database (removeDatabase and truncateDatabase), and the database must be closed.
If you can't find a way to use removeDatabase or truncateDatabase, then you'll have to iterate through the records and delete them individually. If this is done for a large numbers of records in a single transaction, it will be expensive on a number of fronts, including memory usage for the locks: each record is individually locked.
If you don't need to delete all records in a single transaction (I couldn't completely understand your use case), then you can iterate with a cursor using READ_UNCOMMITTED and delete the records in individual transactions using Database.delete. This avoids using lots of memory for the locks, since only one record is locked at a time.
In either case the cost can be reduced by using DatabaseEntry.setPartial(0, 0, true) for the DatabaseEntry that is passed as the data parameter. You only need the key to delete the record, not the data, and avoiding a fetch of the data is a big cost savings (if the record data is not in cache). This optimization is only in JE 5.0 and above --in JE 4.1 and earlier, this has no advantage because the data is always fetched internally, as part of the deletion operation.
--mark

MDT Database Variables post-install

Is the information in the MDT database available to a post-install script? I need to run a Lenovo utility to set the asset tag on the PC. I would like to pre-populate the MDT database with the serial number (which is what I'll use to match the unique PC).
I've found scripts online to get the information into the database, but I want to be able to do something like wflash2.exe /tag:%ASSET-TAG-VARIABLE-FROM-MDT-DATABSE%.

I'm not sure the SID fits on a label that also says "Property of XXXX". ;-) Plus, SIDs can change. They are less concerned about theft, though, than people trying to claim PCs were a part of certain budgets. They'll dig up any old thing
and say they're due a replacement. Not if it doesn't have that sticker, they don't. Anyway...
*sigh*
<![LOG[Property AssetTag is now = AssetTag]LOG]!><time="17:34:42.000+000" date="08-12-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather"><![LOG[Added new custom property ASSETTAG]LOG]!><time="17:34:45.000+000" date="08-12-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather"><![LOG[About to issue SQL statement: SELECT * FROM ComputerIdentity WHERE UUID = '5728E710-D46F-11E3-A8BB-9B8055071B00' OR ASSETTAG = 'AssetTag' OR SERIALNUMBER = 'MJ00SYWY' OR MACADDRESS IN ('44:39:C4:3B:96:48')]LOG]!><time="17:34:45.000+000" date="08-12-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
It is currently set to AssetTag from experimenting with different formats of the variable to get the expected value to drop.
<![LOG[Value for ASSETTAG is already set to AssetTag so database value of 333 will be ignored.]LOG]!><time="17:34:49.000+000" date="08-12-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
So because there is an AssetTag variable pulled by ZTIGather, it uses that information instead of the information I specified in the database?
I tried using the CustomAssetTag field instead of AssetTag. BDD.log's last mention of CustomAssetTag is where is it setting it to the correct value... yet the script seems to ignore it.
Since it takes forever for this task to run, I'll post the information I have and try again, but putting a set in the script so that I see the variables before it tries doing anything.

Delete some records of employee

hi all,
i have one requirement, I have to delete some records of particular employee from given infotype(0019) based on change date(AEDTM).
is there any standard transaction for that?? or any LSMW???
my priority are
1)By Standard Transaction
2) By LSMW
thanks
sachin
Edited by: Sachin Gupta on Sep 25, 2009 5:54 PM

thanks Dana
now i am doing is the same way that u have said even i am getting same error. my code is below
DATA: RETURN TYPE BAPIRETURN1.
INFOTYPES: 0019.
CALL FUNCTION 'HR_READ_INFOTYPE'
EXPORTING
   TCLAS                 = 'A'
    pernr                 = '00000316'
    infty                 = '0019'
   BEGDA                 = '20090401'
   ENDDA                 = '20090401'
BYPASS_BUFFER         = ' '
LEGACY_MODE           = ' '
IMPORTING
SUBRC                 =
tables
    infty_tab             = p0019
EXCEPTIONS
INFTY_NOT_FOUND       = 1
OTHERS                = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop at p0019.
CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
EXPORTING
    number             = p0019-pernr.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
EXPORTING
infty = '0019'
number = p0019-pernr
subtype = p0019-subty
validityend = p0019-endda
validitybegin = p0019-begda
record = p0019
operation = 'DEL'
dialog_mode = '1'
nocommit = 'X'
IMPORTING
return = return.
*key = personaldatakey.
CALL FUNCTION 'BAPI_EMPLOYEE_DEQUEUE'
EXPORTING
number = p0019-pernr.
endloop.
what could be the issue?
thanks
Sachin

Delete a record from a table in a Database with Database Connectivity

I can't find the function from the Database Connectivity library that allows me to delete a record from a table of the database. I tried to use DB Tools Free Object.vi function but this one deletes only the table created with a query.
Thankyou

I have used the sql query as described above and it works fine with access DB and the DB toolkit, the free object vi only deallocated a recordset's references this will noty alter the database since the record is a copy of the databases information. The SQL delete function is very versatile and you should be able to delete records with no problem.
Paul
Paul Falkenstein
Coleman Technologies Inc.
CLA, CPI, AIA-Vision
Labview 4.0- 2013, RT, Vision, FPGA

How can I delete the site (created in webDB) from database?

Hi I have the WebDB 2.2 and Database server Oracle8i and I created a lot of sites with WebDB but I do not know how can I delete them from database server. Could somebody help to me?

Log into sql plus as webdb
Drop user <site name>_admin cascade;
Drop user <site name>_public cascade;
Drop user <site name> cascade;
and drop any other users you have made specically for this site.
Remove the dad from the listener settings.
If you wish to use this site name again in the same database you also have to delete a record from a table in the Webdb schema.
I can't remeber what that is.....
Good Luck
Dave.
null

I need the code to delete record in the database not in the form???

I need the code to delete record in the database not in the form...
because when i execute a form always insert the datas in the data base but i want insert value on a text file and delete in the data base the record whith this value of text file.
i'm spanish an my english is bad sorry.
thank, javier

Well, I fail to understand why you want to complicate easy things, but anyway you can do that by using TEXT_IO within Forms to create text file (see Forms builder help), and UTL_FILE package to read it within Pl/Sql : you could create a stored procedure, and call it from Forms passing the file name as parameter. See UTL_FILE documentation

How to delete a record in database it should be effect in XML

In my application wheni insert a record in database it automatically inserted in XML now my problem is when i delete a record in database it should also effect in XML
plz anybody anything knows about this reply me

First up all, when u insert a record in database, how the data is inserted in xml file. Is there any application written for that?
So when u delete the record from database,and want that same data should be deleted from the xml file, write a application to delete data from xml, and call that when u delete record from database.
U can Write application using DocumentBuilderFactory.
And using XQuery, you can delete data from xml.
Hope this will help u.
.....yogesh

Delete a record in MDT Database from WinPE during Pre install

Similar Messages

Maybe you are looking for