[SOLVED] pacman error: database not found (during an install)

i am trying to install an app
when installing
# pacman -S /path/to/dir/app.tar.gz
error: database not found
when i look inside the tar, theres only one file, app.bin
im sure its some fundamental that im missing. so i have to makepkg first , or am i missing a command during the intallation, or is the file broken?
Last edited by wolfdogg (2011-06-04 05:50:09)

well, im geting some errors with the program, im wondering if i need to make a package? i think i will try that next.
heres the beginning of the log, Java errors mainly
eclipse.buildId=unknown
java.version=1.5.0_11
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=linux, ARCH=x86, WS=gtk, NL=en_US
Command-line arguments: -os linux -ws gtk -arch x86
!ENTRY org.eclipse.equinox.ds
!MESSAGE
!STACK 0
org.osgi.framework.BundleException: The bundle could not be resolved. Reason: Missing Constraint: Import-Package: org.eclipse.equinox.internal.util.event; version="1.0.0"
at org.eclipse.osgi.framework.internal.core.AbstractBundle.getResolverError(AbstractBundle.java:1313)
at org.eclipse.osgi.framework.internal.core.AbstractBundle.getResolutionFailureException(AbstractBundle.java:1297)
at org.eclipse.osgi.framework.internal.core.BundleHost.startWorker(BundleHost.java:309)
at org.eclipse.osgi.framework.internal.core.AbstractBundle.resume(AbstractBundle.java:370)
at org.eclipse.osgi.framework.internal.core.Framework.resumeBundle(Framework.java:1068)
at org.eclipse.osgi.framework.internal.core.StartLevelManager.resumeBundles(StartLevelManager.java:557)
at org.eclipse.osgi.framework.internal.core.StartLevelManager.incFWSL(StartLevelManager.java:464)
at org.eclipse.osgi.framework.internal.core.StartLevelManager.doSetStartLevel(StartLevelManager.java:248)
at org.eclipse.osgi.framework.internal.core.StartLevelManager.dispatchEvent(StartLevelManager.java:445)
at org.eclipse.osgi.framework.eventmgr.EventManager.dispatchEvent(EventManager.java:227)
at org.eclipse.osgi.framework.eventmgr.EventManager$EventThread.run(EventManager.java:337)
ok, i downloaded a different binary of this program, and it installed successfully. thanks for the help
Last edited by wolfdogg (2011-06-04 05:49:37)

Similar Messages

[SOLVED]Pacman error: could not open file /var/.../portaudio

Anyone got any insight?
Any pacman or AUR-helper operation I try to do results in many repititions of this error.
[marcus@ARCH ~]$ packer -Syu
Password:
:: Synchronizing package databases...
core is up to date
extra 450.4K 401.0K/s 00:00:01 [##########################################] 100%
error: failed retrieving file 'community.db.tar.gz' from mirrors.easynews.com#####-------------] 68%
community 372.7K 997.9K/s 00:00:00 [##########################################] 100%
:: Starting full system upgrade...
error: could not open file /var/lib/pacman/sync/community/portaudio-19_20071207-2/desc: No such file or directory
error: could not open file /var/lib/pacman/sync/community/portaudio-19_20071207-2/desc: No such file or directory
error: could not open file /var/lib/pacman/sync/community/portaudio-19_20071207-2/desc: No such file or directory
error: could not open file /var/lib/pacman/sync/community/portaudio-19_20071207-2/desc: No such file or directory
error: could not open file /var/lib/pacman/sync/community/portaudio-19_20071207-2/desc: No such file or directory
[snip many repeats of same error]
[marcus@ARCH ~]$ packer portaudio
0 error: could not open file /desc: could not open file /var/lib/pacman/sync/community/portaudio-19_20071207-2/desc: No such file or directory
1 community/desc: 19_20071207-2error: could not open file /var/lib/pacman/sync/community/portaudio-19_20071207-2/desc: No such file or directory
error: could not open file /var/lib/pacman/sync/community/portaudio-19_20071207-2/desc: No such file or directory
2 aur/haskell-portaudio 0.0.1-2
Haskell bindings for the PortAudio library.
3 aur/mingw32-portaudio 19_20071207-1
A free, cross-platform, open source, audio I/O library (mingw32)
4 aur/portaudio-svn 1384-3
PortAudio is a free, cross platform, open-source, audio I/O library.
5 aur/pyaudio 0.2.3-3
Python bindings for PortAudio, the cross-platform audio I/O library
6 aur/portaudio_v18 pa_snapshot_v18-3
A free, cross-platform, open source, audio I/O library
Type numbers to install. Separate each number with a space.
Numbers: 1
error: could not open file /var/lib/pacman/sync/community/portaudio-19_20071207-2/depends: No such file or directory
desc: package not found, searching for group...
error: could not open file /var/lib/pacman/sync/community/portaudio-19_20071207-2/desc: No such file or directory
error: 'desc:': not found in sync db
Last edited by Skripka (2010-05-11 18:21:11)

hokasch wrote:looks like that mirror has some problem, switch to another one for the time being
That mirror does have a problem...but switching to a different mirror returns the same mystery local error. PS-I haven't had portaudio installed on my system in at least 6 months, and pacman has started returning errors about it this morning
Last edited by Skripka (2010-05-11 18:15:33)

[SOLVED] pacman error: could not open file /var/lib ...

the actual error is
error: could not open file /var/lib/pacman/sync/community/fonteditfs-1.2-2/desc: No such file or directory
removing that folder fixed it. i dont know if it was a coding mistake or just my box did something stupid today :S
any thoughts?
Last edited by eldragon (2010-04-20 17:25:18)

geniuz wrote:
I don't know if this error occured during an update of right after you've invoked pacman, but in any way synchronizing pacman I think should fix the issue. This is something you might have tried before deleting the file, but then again I don't know when the error occured. If it occured immediately deleting the file would probably be the easiest solution. I would've done the same.
If you've synchronized pacman after you've removed the file all should be well now, maybe something indeed went wrong during an update (maybe your mirror went down or something, you never know).
yes, the error apperared right after syncing the databases. the update went as expected...

"ERROR disk not found" during boot cdrom installation

We were booting a T4-4 server from a Solaris 10 boot ISO and command I used was "boot rcdrom - install as nowin" (i was mounting the ISO using the serial redirection window etc, hence the rcdrom)
It worked great asking for the" language to be installed" and "network setting and etc."
then it starts communicating with the jump server to pick up the jumpstart script and etc still working great. but when it start to install, it returned with "ERROR no disk found"
I am sure there are two 600G disk on the server. not sure why it think there is no disk during the installation. googled it and some said something related to raid and i cannot get a conclusion.
{0} ok show-disks
a) /pci@700/pci@1/pci@0/pci@0/LSI,sas@0/disk
b) /pci@500/pci@1/pci@0/pci@1/pci@0/pci@2/SUNW,qlc@0,1/fp@0,0/disk
c) /pci@500/pci@1/pci@0/pci@1/pci@0/pci@2/SUNW,qlc@0/fp@0,0/disk
d) /pci@400/pci@2/pci@0/pci@1/pci@0/pci@2/SUNW,qlc@0,1/fp@0,0/disk
e) /pci@400/pci@2/pci@0/pci@1/pci@0/pci@2/SUNW,qlc@0/fp@0,0/disk
{0} ok devalias
screen /pci@400/pci@1/pci@0/pci@7/pci@0/display@0
mouse /pci@400/pci@1/pci@0/pci@8/pci@0/usb@0,2/hub@2/device@1/mouse@1
keyboard /pci@400/pci@1/pci@0/pci@8/pci@0/usb@0,2/hub@2/device@1/keyboard@0
disk7 /pci@700/pci@1/pci@0/pci@0/@0/disk@p3
disk6 /pci@700/pci@1/pci@0/pci@0/@0/disk@p2
disk5 /pci@700/pci@1/pci@0/pci@0/@0/disk@p1
disk4 /pci@700/pci@1/pci@0/pci@0/@0/disk@p0
scsi1 /pci@700/pci@1/pci@0/pci@0/@0
net3 /pci@600/pci@2/pci@0/pci@3/network@0,1
net2 /pci@600/pci@2/pci@0/pci@3/network@0
rcdrom /pci@400/pci@1/pci@0/pci@8/pci@0/usb@0,2/hub@2/hub@3/storage@2/disk@0
rkeyboard /pci@400/pci@1/pci@0/pci@8/pci@0/usb@0,2/hub@2/device@4/keyboard@0
rscreen /pci@400/pci@1/pci@0/pci@7/pci@0/display@0:r1280x1024x60
net1 /pci@400/pci@1/pci@0/pci@2/network@0,1
net0 /pci@400/pci@1/pci@0/pci@2/network@0
net /pci@400/pci@1/pci@0/pci@2/network@0
disk3 /pci@400/pci@1/pci@0/pci@0/@0/disk@p3
disk2 /pci@400/pci@1/pci@0/pci@0/@0/disk@p2
disk1 /pci@400/pci@1/pci@0/pci@0/@0/disk@p1
disk0 /pci@400/pci@1/pci@0/pci@0/@0/disk@p0
disk /pci@400/pci@1/pci@0/pci@0/@0/disk@p0
scsi0 /pci@400/pci@1/pci@0/pci@0/@0
scsi /pci@400/pci@1/pci@0/pci@0/@0
virtual-console /virtual-devices@100/console@1
name aliases
{0} ok select scsi0
{0} ok show-children
FCode Version 1.00.54, MPT Version 2.00, Firmware Version 5.00.17.00
Target 9
Unit 0 Disk HITACHI H106060SDSUN600G A2B0 1172123568 Blocks, 600 GB
SASDeviceName 5000cca0256f4000 SASAddress 5000cca0256f4001 PhyNum 0
Target a
Unit 0 Disk HITACHI H106060SDSUN600G A2B0 1172123568 Blocks, 600 GB
SASDeviceName 5000cca025671ff4 SASAddress 5000cca025671ff5 PhyNum 1
f) /pci@400/pci@1/pci@0/pci@8/pci@0/usb@0,2/hub@2/hub@3/storage@2/disk
g) /pci@400/pci@1/pci@0/pci@0/LSI,sas@0/disk
h) /iscsi-hba/disk
q) NO SELECTION
{0} ok probe-scsi
This command may hang the system if a Stop-A or halt command
has been executed. Please type reset-all to reset the system
before executing this command.
Do you wish to continue? (y/n) y
FCode Version 1.00.54, MPT Version 2.00, Firmware Version 5.00.17.00
Target 9
Unit 0 Disk HITACHI H106060SDSUN600G A2B0 1172123568 Blocks, 600 GB
SASDeviceName 5000cca0256f4000 SASAddress 5000cca0256f4001 PhyNum 0
Target a
Unit 0 Disk HITACHI H106060SDSUN600G A2B0 1172123568 Blocks, 600 GB
SASDeviceName 5000cca025671ff4 SASAddress 5000cca025671ff5 PhyNum 1
{0} ok show-volumes
No volumes to show
{0} ok

nothing seems to come up
{0} ok boot rcdrom -s
Boot device: /pci@400/pci@1/pci@0/pci@8/pci@0/usb@0,2/hub@2/hub@3/storage@2/disk@0 File and args: -s
SunOS Release 5.10 Version Generic_137137-09 64-bit
Copyright 1983-2008 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
WARNING: consconfig: cannot find driver for screen device /pci@400/pci@1/pci@0/pci@7/pci@0/display@0
Booting to milestone "milestone/single-user:default".
Configuring devices.
Using RPC Bootparams for network configuration information.
Requesting System Maintenance Mode
SINGLE USER MODE
# format
Searching for disks...done
No disks found!

Libsamplerate-0.1.2-4-i686.pkg.tar.gz not found during MPD install

ran pacman -S mpd
Targets: libmikmod-3.1.12-1 libsamplerate-0.1.2-4 mpd-0.13.1-2
I was able to get the first and third fine when Synching the package, but all the mirrors failed to retrieve libsamplerate-0.1.2-4. Do I need to download and compile the newest version of libsamplerate myself or will the pacman repositories obtain it?
edit: I compiled -0.1.3 myself. hopefully that will do it.
Last edited by elephantos (2008-05-14 00:43:00)

In such situations one would do:
pacman -Syy
Current libsamplerate version is 0.1.3, the database information is not in sync, so it's refreshed. Compilation is not a solution. If after running the above you still can't get it to install, it's possibly a bug or a fault somewhere which you shouldn't ignore.

ISE Guest Portal - Error Resource not found

Hello,
When I create a guest user through the sponsor portal, then try to login with this guest user through the Guest Portal, after I press login button, the following error message occurs and do not know what to do to solve.
Error: Resource not found.
Resource: /guestportal/
None of the messages on the forum about it helped me to solve the problem.
I am using ISE 1.1.3.124 and this is a new re-image appliance.
Can anyone help?

Hello,
As you are not able to get the guest portal, then you need to assure the following things:-
1) Ensure that the two Cisco av-pairs that are configured on the authorization profile should exactly match the example below. (Note: Do not replace the "IP" with the actual Cisco ISE IP address.)
–url-redirect=https://ip:8443/guestportal/gateway?...lue&action=cpp
–url-redirect-acl=ACL-WEBAUTH-REDIRECT (ensure that this ACL is also defined on the access switch)
2) Ensure that the URL redirection portion of the ACL have been applied to the session by entering the show epm session ip command on the switch. (Where the session IP is the IP address that is passed to the client machine by the DHCP server.)
Admission feature : DOT1X
AAA Policies : #ACSACL#-IP-Limitedaccess-4cb2976e
URL Redirect ACL : ACL-WEBAUTH-REDIRECT
URL Redirect :
https://node250.cisco.com:8443/guestportal/gateway?sessionId=0A000A72
0000A45A2444BFC2&action=cpp
3) Ensure that the preposture assessment DACL that is enforced from the Cisco ISE authorization profile contains the following command lines:
remark Allow DHCP
permit udp any eq bootpc any eq bootps
remark Allow DNS
permit udp any any eq domain
remark ping
permit icmp any any
permit tcp any host 80.0.80.2 eq 443 --> This is for URL redirect
permit tcp any host 80.0.80.2 eq www --> Provides access to internet
permit tcp any host 80.0.80.2 eq 8443 --> This is for guest portal
port
permit tcp any host 80.0.80.2 eq 8905 --> This is for posture
communication between NAC agent and ISE (Swiss ports)
permit udp any host 80.0.80.2 eq 8905 --> This is for posture
communication between NAC agent and ISE (Swiss ports)
permit udp any host 80.0.80.2 eq 8906 --> This is for posture
communication between NAC agent and ISE (Swiss ports)
deny ip any any
Note:- Ensure that the above URL Redirect has the proper Cisco ISE FQDN.
4) Ensure that the ACL with the name "ACL-WEBAUTH_REDIRECT" exists on the switch as follows:
ip access-list extended ACL-WEBAUTH-REDIRECT
deny ip any host 80.0.80.2
permit ip any any
5) Ensure that the http and https servers are running on the switch:
ip http server
ip http secure-server
6) Ensure that, if the client machine employs any kind of personal firewall, it is disabled.
7) Ensure that the client machine browser is not configured to use any proxies.
8) Verify connectivity between the client machine and the Cisco ISE IP address.
9) If Cisco ISE is deployed in a distributed environment, make sure that the client machines are aware of the Policy Service ISE node FQDN.
10) Ensure that the Cisco ISE FQDN is resolved and reachable from the client machine.
11) Or you need to do re-image again.

[solved] error: 'kernel26': not found in sync db

I'm having a strange issue - pacman -S kernel26 returns:
kernel26 package not found, searching for group...
error: 'kernel26': not found in sync db
pacman -Sg base:
pacman -Sg base
base libfetch
base shadow
package databases are up to date, tried different mirrors.
pacman -Sy:
:: Synchronizing package databases...
testing is up to date
core is up to date
extra is up to date
community is up to date
here's my pacman.conf:
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#XferCommand = /usr/bin/curl %u > %o
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg = wesnoth
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options (all disabled by default)
#NoPassiveFtp
#UseSyslog
#ShowSize
#UseDelta
#TotalDownload
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# Testing is disabled by default. To enable, uncomment the following
# two lines. You can add preferred servers immediately after the header,
# and they will be used before the default mirrors.
[testing]
Include = /etc/pacman.d/mirrorlist
[core]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[extra]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
#[kdemod-core]
#Server = http://mirrors.igprolin-online.org/pub/kdemod/core/i686
#[kdemod-extragear]
#Server = http://mirrors.igprolin-online.org/pub/kdemod/extragear/i686
[community]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs
Last edited by schuay (2009-04-23 10:12:42)

schuay wrote:thanks, that helped.
i had to do a couple of hard reboots recently, could that have been the cause?
Yes, I think your local pacman database was corrupted - some files were probably missing. For instance on ext4 filesystem, it can take 30 seconds (by default) until the data is written from cache to the disk. If you hard reboot during that time, the files can go missing.

[solved] error: 'gstreamer': not found in sync db

hi, i just did an -Syu and now i cant play videos with vlc!! it cant find the decoder!! For some reason, pacman cant find any gstreamer packages in the repos!!
how do i solve this??
[root@ArchLinux danny]# pacman -Ss gst
[root@ArchLinux danny]# pacman -Sy gstreamer
:: Synchronising package databases...
core is up to date
extra is up to date
community is up to date
gstreamer package not found, searching for group...
error: 'gstreamer': not found in sync db
[root@ArchLinux danny]#
[root@ArchLinux danny]# pacman -Qs gstreamer
local/gstreamer0.10 0.10.25-1
GStreamer Multimedia Framework
local/gstreamer0.10-base 0.10.25-1
GStreamer Multimedia Framework Base plugin libraries
local/gstreamer0.10-base-plugins 0.10.25-1 (gstreamer0.10-plugins)
GStreamer Multimedia Framework Base Plugins (gst-plugins-base)
local/gstreamer0.10-ffmpeg 0.10.9-1 (gstreamer0.10-plugins)
Gstreamer FFMpeg Plugin
local/gstreamer0.10-good 0.10.17-2
GStreamer Multimedia Framework Good plugin libraries
local/gstreamer0.10-good-plugins 0.10.17-2 (gstreamer0.10-plugins)
GStreamer Multimedia Framework Good Plugins (gst-plugins-good)
local/gstreamer0.10-python 0.10.17-1
Python bindings for GStreamer 0.10
local/gstreamer0.10-ugly 0.10.13-3
GStreamer Multimedia Framework Ugly plugin libraries
local/gstreamer0.10-ugly-plugins 0.10.13-3 (gstreamer0.10-plugins)
GStreamer Multimedia Framework Ugly Plugins (gst-plugins-ugly)
[root@ArchLinux danny]#
Last edited by ninjaprawn (2010-02-11 20:49:03)

wonder wrote:because the actual name is gstreamer0.10. the only thing that is missing is gstreamer0.10-bad-plugins and you might want to install them.
hmmmmmm, I don't know? surely, if I do pacman -Ss gst, it should be listed from the repo in the output then?? As you can see from my first post, it isn't!!

[SOLVED] == ERROR: file not found: `/sbin/dmsetup'

[EDIT] A much simpler way to deal with this is to explicitly ignore the kernel update during a full system update:
pacman -Syu --ignore linux
Then explicitly update the kernel alone:
pacman -S linux
[EDIT] First, after a full system update I had to move the STUB kernel image from the UEFI directory back to /boot, them recreate the images a second time. The systemd service moved it back to the UEFI directory.
[EDIT] The use of 'mdadm_udev' in HOOKS= also seems to be no longer just 'preferred' to the 'mdadm' hook but instead is now mandatory.
I've read the news item...
Changes to LVM
2013-02-12 - Thomas Bächler
With lvm2 2.02.98-3, we now utilize lvmetad to activate LVM volumes automatically. This implies the following changes:
The lvm2 initramfs hook now requires the udev hook.
The use_lvmetad = 1 must be set in /etc/lvm/lvm.conf. This is the default now - if you have a lvm.conf.pacnew file, you must merge this change.
You can restrict the volumes that are activated automatically by setting the auto_activation_volume_list in /etc/lvm/lvm.conf. If in doubt, leave this option commented out.
If you need monitoring (needed for snapshots), run systemctl enable lvm-monitoring.service.
The lvmwait kernel command line option is no longer needed and has no effect.
If you run pacman -Syu and update device-mapper, linux and lvm2 at the same time, you will get an error message that /sbin/dmsetup is missing. Run mkinitcpio -p linux again after the update to avoid any problems.
...and I do get the message...
==> ERROR: file not found: `/sbin/dmsetup'
...but after a full system update with...
pacman -Syu
...when I execute...
mkinitcpio -p linux
...this is what I get...
Building image from preset: 'default'
/boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
ERROR:specified kernel image does not exist: `/boot/vmlinuz-linux'
Building image from preset: 'fallback'
/boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
ERROR:specified kernel image does not exist: `/boot/vmlinuz-linux'
So of course if I reboot I get the dreaded 'No volume groups found' message.
I should mention that I use the systemd path and service to move the kennel after it has been updated.
Last edited by KairiTech (2013-04-07 02:45:12)

With lvm2 2.02.98-3, we now utilize lvmetad to activate LVM volumes automatically. This implies the following changes:
The lvm2 initramfs hook now requires the udev hook.
The use_lvmetad = 1 must be set in /etc/lvm/lvm.conf. This is the default now - if you have a lvm.conf.pacnew file, you must merge this change.
You can restrict the volumes that are activated automatically by setting the auto_activation_volume_list in /etc/lvm/lvm.conf. If in doubt, leave this option commented out.
If you need monitoring (needed for snapshots), run systemctl enable lvm-monitoring.service.
The lvmwait kernel command line option is no longer needed and has no effect.
Just to confirm. You did all these steps, right?
EDIT: I just noticed something:
KairiTech wrote:HOOKS="base udev autodetect sata mdadm usbinput keymap encrypt lvm2 filesystems timestamp shutdown"
Replace
mdadm
with
mdadm_udev
. Maybe this is nothing, but it is recommended to use this one instead of the other.
NEW EDIT: Expecially this one
The use_lvmetad = 1 must be set in /etc/lvm/lvm.conf. This is the default now - if you have a lvm.conf.pacnew file, you must merge this change.
Last edited by s1ln7m4s7r (2013-03-24 20:42:55)

Solved - Cannot install gimp : error: 'libmng': not found in sync db

This is the code I get. I think something is wrong with my pacman since it was working fine at the begainning.
bash-3.2# pacman -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
:: Starting full system upgrade...
local database is up to date
bash-3.2# pacman -S gimp
Warning: gimpshop provides gimp
resolving dependencies...
error: cannot resolve "libmng", a dependency of "gimpshop"
error: failed to prepare transaction (could not satisfy dependencies)
:: gimpshop: requires libmng
bash-3.2# pacman -S libmng
error: 'libmng': not found in sync db
Vlc is installed but if I try this I still get that kind of error.
bash-3.2# pacman -S vlc
error: 'vlc': not found in sync db
This is my pacman.conf
# /etc/pacman.conf
# See the pacman manpage for option directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
HoldPkg = pacman glibc
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# Testing is disabled by default. To enable, uncomment the following
# two lines. You can add preferred servers immediately after the header,
# and they will be used before the default mirrors.
#[testing]
#Include = /etc/pacman.d/mirrorlist
[core]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[extra]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[community]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
# Unstable is disabled by default. To enable, uncomment the following
# two lines. You can add preferred servers immediately after the header,
# and they will be used before the default mirrors.
#[unstable]
#Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs
And this is my mirrorlist
# Arch Linux repository mirrorlist
# United States
#Server = ftp://ftp.archlinux.org/$repo/os/i686
#Server = ftp://locke.suu.edu/linux/dist/archlinux/$repo/os/i686
#Server = ftp://mirrors.unixheads.org/archlinux/$repo/os/i686
#Server = ftp://ftp-linux.cc.gatech.edu/pub/linux/distributions/archlinux/$repo/os/i686
#Server = ftp://mirror.cs.vt.edu/pub/ArchLinux/$repo/os/i686
#Server = http://mirrors.easynews.com/linux/archlinux/$repo/os/i686
#Server = ftp://ftp.ibiblio.org/pub/linux/distributions/archlinux/$repo/os/i686
#Server = http://holmes.umflint.edu/archlinux/$repo/os/i686
#Server = http://mirror.neotuli.net/arch/$repo/os/i686
# South America
# - Brazil
#Server = http://archlinux.c3sl.ufpr.br/$repo/os/i686
#Server = ftp://archlinux.c3sl.ufpr.br/archlinux/$repo/os/i686
#Server = ftp://ftp.las.ic.unicamp.br/pub/archlinux/$repo/os/i686
# Europe
# - Austria
#Server = ftp://gd.tuwien.ac.at/opsys/linux/archlinux/$repo/os/i686
# - Belgium
#Server = ftp://ftp.belnet.be/mirror/archlinux.org/$repo/os/i686
# - Czech Republic
#Server = ftp://ftp.sh.cvut.cz/MIRRORS/arch/$repo/os/i686
# - Estonia
#Server = ftp://ftp.estpak.ee/pub/archlinux/$repo/os/i686
# - France
#Server = ftp://mir1.archlinuxfr.org/archlinux/$repo/os/i686
#Server = ftp://mir2.archlinuxfr.org/archlinux/$repo/os/i686
#Server = ftp://distrib-coffee.ipsl.jussieu.fr/pub/linux/archlinux/$repo/os/i686
#Server = http://mir.archlinux.fr/$repo/os/i686
#Server = ftp://ftp.free.fr/mirrors/ftp.archlinux.org/$repo/os/i686
# - Germany
#Server = ftp://ftp.hosteurope.de/mirror/ftp.archlinux.org/$repo/os/i686
#Server = ftp://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/i686
#Server = ftp://ftp.uni-bayreuth.de/pub/linux/archlinux/$repo/os/i686
#Server = ftp://ftp.archlinuxppc.org/i686/$repo/os/i686
#Server = ftp://ftp.tu-chemnitz.de/pub/linux/archlinux/$repo/os/i686
#Server = http://ftp.uni-kl.de/pub/linux/archlinux/$repo/os/i686
# - Great Britain
#Server = http://www.mirrorservice.org/sites/ftp.archlinux.org/$repo/os/i686
#Server = ftp://mirrors.uk2.net/pub/archlinux/$repo/os/i686
#Server = http://archlinux.mirrors.uk2.net/$repo/os/i686
# - Greece
#Server = ftp://ftp.ntua.gr/pub/linux/archlinux/$repo/os/i686
# - Hungary
#Server = ftp://ftp.mfa.kfki.hu/pub/mirrors/ftp.archlinux.org/$repo/os/i686
# - Ireland
#Server = ftp://ftp.heanet.ie/mirrors/ftp.archlinux.org/$repo/os/i686
# - Italy
#Server = ftp://mi.mirror.garr.it/mirrors/archlinux/$repo/os/i686
# - Netherlands
#Server = ftp://ftp.nluug.nl/pub/metalab/distributions/archlinux/$repo/os/i686
#Server = ftp://ftp.surfnet.nl/pub/os/Linux/distr/archlinux/$repo/os/i686
# - Poland
#Server = ftp://mirror.icis.pcz.pl/archlinux/$repo/os/i686
#Server = http://piotrkosoft.net/pub/mirrors/ftp.archlinux.org/$repo/os/i686
#Server = ftp://ftp.piotrkosoft.net/pub/mirrors/ftp.archlinux.org/$repo/os/i686
# - Portugal
#Server = ftp://cesium.di.uminho.pt/pub/archlinux/$repo/os/i686
# - Romania
#Server = ftp://ftp.iasi.roedu.net/mirrors/archlinux.org/$repo/os/i686
# - Russia
#Server = ftp://mirror.yandex.ru/archlinux/$repo/os/i686
#Server = http://archlinux.freeside.ru/$repo/os/i686
# - Sweden
#Server = ftp://ftp.ds.hj.se/pub/os/linux/archlinux/$repo/os/i686
#Server = ftp://ftp.gigabit.nu/$repo/os/i686
# - Switzerland
#Server = ftp://archlinux.puzzle.ch/$repo/os/i686
# - Turkey
#Server = http://server.elsistech.com/archlinux/$repo/os/i686
# - Ukraine
#Server = ftp://hell.org.ua/archlinux/$repo/os/i686
#Server = ftp://ftp.linux.kiev.ua/pub/Linux/ArchLinux/$repo/os/i686
# Asia
# - Israel
#Server = http://mirror.isoc.org.il/pub/archlinux/$repo/os/i686
# Australia
#Server = ftp://mirror.pacific.net.au/linux/archlinux/$repo/os/i686
#Server = ftp://mirror.aarnet.edu.au/pub/archlinux/$repo/os/i686
# Setup-Entry
Server = http://mirrors.easynews.com/linux/archlinux/$repo/os/i686
Ho and I really like Arch, I just need to know this distribution better.
And thanks for the help
Last edited by odf (2008-07-18 19:26:44)

Not sure why typing 'gimp' is bringing up 'gimpshop', but anyhoo...
I just punched in 'http://mirrors.easynews.com/linux/archl … po/os/i686' into Epiphany and it 404's, so I'd assume it's down at the mo. Meantime, if you go into your mirrorlist and uncomment whichever 'Server = *' is closest to you (you could just do any of them, but the nearest ones will give you better performance) and comment out that bottom line.
All going to plan, that should sort it.
Last edited by ThomasBisset (2008-07-18 00:24:54)

[Solved]error: 'xorg': not found in sync db

I'm trying to install Gnome onto this computer of mine using the instructions http://wiki.archlinux.org/index.php/Des … e_X_server. But when I type "sudo pacman -S xorg" I get "error: 'xorg': not found in sync db".
Last edited by jordanwb (2008-07-03 21:56:49)

Solved. "sudo pacman -Syu"

[solved] 'ERROR: file not found:' when running 'mkinitcpio -p linux'

$ sudo mkinitcpio -p linux
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.13.5-1-ARCH
-> Running build hook: [systemd]
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
-> Running build hook: [consolefont]
-> Running build hook: [keymap]
==> Generating module dependencies
==> Creating cat initcpio image: /boot/initramfs-linux.img
==> WARNING: errors were encountered during the build. The image may not be complete.
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.13.5-1-ARCH
-> Running build hook: [systemd]
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: aic94xx
==> WARNING: Possibly missing firmware for module: smsmdtv
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
-> Running build hook: [consolefont]
-> Running build hook: [keymap]
==> Generating module dependencies
==> Creating cat initcpio image: /boot/initramfs-linux-fallback.img
==> WARNING: errors were encountered during the build. The image may not be complete.
Things seems to work, but I'm a bit worried.
It has just started. PS/2 atkbd stuff went fine.
journalctl shows
Feb 26 22:36:09 localhost systemd-udevd[62]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[63]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export -
Feb 26 22:36:09 localhost systemd-udevd[64]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[65]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export -
Feb 26 22:36:09 localhost kernel: sda: sda1 sda2 sda3 sda4
Feb 26 22:36:09 localhost kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Feb 26 22:36:09 localhost systemd-udevd[66]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[67]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export
I'm using [testing] but I don't know if it matters.
What should I post?
Last edited by karol (2014-03-15 15:03:56)

The systemd build hook looks like this:
build() {
local rules unit
# from base
add_binary /bin/mount
add_binary /usr/bin/kmod /usr/bin/modprobe
# systemd
add_binary /usr/lib/systemd/systemd /init
add_binary /usr/bin/systemd-tmpfiles
# generate sysroot.mount and sysroot-usr.mount
add_file "/usr/lib/systemd/system-generators/systemd-fstab-generator"
# udev rules and systemd units
map add_udev_rule "$rules" \
50-udev-default.rules \
60-persistent-storage.rules \
64-btrfs.rules \
80-drivers.rules \
99-systemd.rules \
map add_systemd_unit \
ctrl-alt-del.target \
initrd-cleanup.service \
initrd-fs.target \
initrd-parse-etc.service \
initrd-root-fs.target \
initrd-switch-root.service \
initrd-switch-root.target \
initrd-udevadm-cleanup-db.service \
initrd.target \
kmod-static-nodes.service \
sockets.target \
[email protected] \
systemd-journald.service \
systemd-tmpfiles-setup-dev.service \
systemd-udev-trigger.service \
systemd-udevd-control.socket \
systemd-udevd-kernel.socket \
systemd-udevd.service
add_symlink "/usr/lib/systemd/system/default.target" "initrd.target"
# libdbus needs the passwd info of the root user
# TODO: make sure this is no longer necessary when systemctl moves to sd-bus
add_file "/etc/nsswitch.conf"
add_file "/etc/passwd"
add_binary "$(readlink -f /usr/lib/libnss_files.so)"
# udev wants /etc/group since it doesn't launch with --resolve-names=never
add_file "/etc/group"
Do all of those files exist on your sytemd? I'm not running testing nor systemd in my initrd, so I can't do much checking.
Edit: You're not the only one. Bug report: https://bugs.archlinux.org/task/39059
Last edited by Scimmia (2014-02-27 06:59:55)

Error in File name or class name not found during Automation operation: 'CreateObject'

Hello Team,
When I am trying to execute the below code i am getting the following error. Any help would be greatly appreciated.
Set oFSO = CreateObject("Scripting.FileSystemObject")
If Not oFSO.FolderExists(SavePath) Then
Set f = oFSO.CreateFolder(SavePath)
Else
End If
53 4/11/2014 12:27:22 PM Error:
Error in <NoName(4).VBS> (Line: 9, Column: 1):
File name or class name not found during Automation operation: 'CreateObject'
I have googled through the error and tried to re-register the scrrun.dll using regsvr32 eventhogh it is successfully registered, i am getting the following error. My PC is windows 7 32bit OS.
any help is greatly appreciated.

The following script class will write a log file entry. See if it will run for you.
The script is using a class object that you might not have seen before. A little intro: The top section is just for testing the class. Normally I just comment this out after the class is working well. It should run right way. I would save the vbs file in the editor, That way when you are using autoactpath or currentscriptpath variables they will be able resolve the paths.
Paul
Attachments:
LoggingCode_V2.VBS ‏5 KB

Error: Preset not found: '/etc/mkinitcpio.d/linux.preset' [Solved]

Hi
I tried to initial RAM disk with and got error message
[root@archiso /]# mkinitcpio -p linux
==> ERROR; Preset not found: '/etc/mkinitcpio.d/linux.preset'
And I found some answers but one said
ALARM doesn't use an uInitrd.
and another said I have to be install kernel26.
How I can solve this?
Last edited by rob111 (2013-08-31 17:41:46)

rob111 wrote:I can switch between [root@archiso /] and root@archiso ~ #.
This is confusing given this report. Could you confirm exactly the prompt you have when you try to run the configuration commands such as mkinitcpio -p linux.
Because, as Trilby says, if you really have successfully installed base and base-devel and chrooted into the system, you should not be seeing these errors. Also, I am pretty sure that you should not have needed to verify the master key manually. When Arch first introduced signing, manual verification of keys was required but I am almost certain that is no longer the case. So something is almost certainly wrong at an earlier stage and you need to fix that, as Trilby says, before moving onto the next stage.
EDIT: "As Trilby says" should now read "as Trilby says again" - I'm too slow.
Last edited by cfr (2013-08-25 22:57:40)

'Connection Description for Remote Database not found' Error

Hi All,
I have an interface that loads Oracle DB from an Oracle source(JD Edwards). It is mostly one to one mapping of the columns, and is utilizing LKM Oracle to Oracle(DBLink), IKM Oracle Incremental Update and CKM Oracle.
I am getting an error when executing the interface which states 'Connection Description for Remote Database Not Found' at the 'Insert Flow into I$ table' step in the Operator logs.
The below is the content of the error:
2019 : 42000 : java.sql.SQLException: ORA-02019: connection description for remote database not found
java.sql.SQLException: ORA-02019: connection description for remote database not found
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
     at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:633)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1086)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3057)
     at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.j(e.java)
     at com.sunopsis.dwg.cmd.h.z(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
Please advice me on the correction.
Many Thanks!

Hi All,
I am seeing things are working fine, when I am using LKM SQL to Oracle in combination with IKM Oracle Incremental Update. It is only in the case of using LKM Oracle to Oracle(DBLINK) in combination with IKM Oracle Incremental Update, that the above mentioned error is thrown.
Please suggest on the resolution in using LKM Oracle to Oracle(DBLINK) with IKM Oracle Incremental Update...
Thanks!

[SOLVED] pacman error: database not found (during an install)

Similar Messages

Maybe you are looking for