Delete applicant number whitout using PU90
Hi Expert,
I wrote an RFC function to create an applicant. I use BAPI_APPLICANT_CREATE.
After, when I have an applicant number, I need to update some infotype.
If during this update, I have an error, I need to delete the applicant number.
It is possible with a function module or class ?
Thanx
Tony
I resolved my problem by using CALL TRANSACTION instruction
Thank you Expert
Similar Messages
-
Delet applicant number without using PU90
Hi Expert,
I wrote an RFC function to create an applicant. I use BAPI_APPLICANT_CREATE.
After, when I have an applicant number, I need to update some infotype.
If during this update, I have an error, I need to delete the applicant number.
It is possible with a function module or class ?
Thanx
Tonya class dealing with candidates is CL_HRRCF_CANDIDATE. may be you can find something there.
or you could try to do it the database way:
candidate is OTYPE NA in HRP1000
There are relations in HRP1001:
A/B 650 to CP
A/B 651 to ND
CP may refer to OTYPES P, US, BP and S
The infotypes contayning candidates information are 51xx, tables HRP51xx, HRT51xx and maybe HRHAPxxx.
And don't forget: some information (addresses etc.) are stored as business partner in tables BUPAxxxx. -
I added an e-mail account to my iphone using microsoft exchange; all went fine. I then deleted a number of contacts from my iphone that I did not want on my phone. when I went into my e-mail account on my computer the contacts were deleted from there also. Will I be able to retrieve them? If so, how? Thank you.
In the device sync pages select Photos on the top at the right.
Un tick Sync Photos
Apply -
For some reason my phone is using another number and won't let me delete the number and select my own numbers. Any reasons why
Are you talking about iMessage?
-
HEEELLPP - Deleted employee data, while deleting applicant with same ID
Hello,
I need help solving a problem created in payments. We deleted all internal applicant data on our base, using PU90 through LSMW. The problem with this transaction is that it is based on PU00. So, the program deleted all records in PTQUODED as it didn't check if the Personnel Id wasn't an employee.
Now I need to replace data and we are trying to use database backup.
Any other suggestions? Is there any other employee table that could be deleted with the applicant's infotypes?
Thanks,
Leonardohttps://forums.sdn.sap.com/click.jspa?searchID=16777547&messageID=5847814
-
How to delete a number from imessage
I have deleted a number from my contacts and its still showing up on my imessage.How can i delete this number?
Hi,
You can disable a "Receive At" item which will in turn remove it from the "Start new conversation from" drop down in the Messages app across Mountain Lion and Mavericks.
You can remove it from the iPhone or other iOS device.
However this will not remove it on either Messages 7.x.x (Mountain Lion) or Messages 8 (Mavericks)
In Mavericks you have to delete the .plist involved to remove the Aliases you don't want (and tend to have to re-enter the Apple ID as well)
With a Finder window Open, use the Go Menu whilst holding down the ALT key.
Select the Library that now appears in the menu list.
Navigate to Preferences.
Find com.apple.ids.service.com.apple.madrid.plist and drag it to the Trash
Restart the Messages app
8:50 pm Monday; April 7, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
how can i delete a number of emails at once? I have a backlog and don't want to go through them all.
No.
With an Exchange or IMAP account you can delete the messages with the email client used on your computer or via webmail access for the account - all server stored mailboxes are kept synchronized with the server with each email client used to access the account.
Not possible with an antiquated POP account. -
i would like to know to delete a number that still shows up in my text message people i can send messages to but is no longer a contact in my phone. but since i have sent the person a text in the past and when i type the name in it will pull it up how do i delete that
dam122577 wrote:
but wont restoring as new delete all my info on my phone
Yes. That is why I added...
it will disappear over time due to non-use. -
Hi,
Can anyone let me know the BAPI to delete the Batch Number when ever a particular Material document is reversed for a year.
(Batch Number that was created as part of Material Document Creation and Each Batch Number is used only for one Material Document number)
Points for sure..
Thanks,
Ponraj.s.Ponraj,
BAPI_BATCH_CHANGE Change Batch
BAPI_BATCH_CREATE Create Batch
BAPI_BATCH_DELETE delete batch
Amit. -
Best way to delete large number of records but not interfere with tlog backups on a schedule
Ive inherited a system with multiple databases and there are db and tlog backups that run on schedules. There is a list of tables that need a lot of records purged from them. What would be a good approach to use for deleting the old records?
Ive been digging through old posts, reading best practices etc, but still not sure the best way to attack it.
Approach #1
A one-time delete that did everything. Delete all the old records, in batches of say 50,000 at a time.
After each run through all the tables for that DB, execute a tlog backup.
Approach #2
Create a job that does a similar process as above, except dont loop. Only do the batch once. Have the job scheduled to start say on the half hour, assuming the tlog backups run every hour.
Note:
Some of these (well, most) are going to have relations on them.Hi shiftbit,
According to your description, in my opinion, the type of this question is changed to discussion. It will be better and
more experts will focus on this issue and assist you. When delete large number of records from tables, you can use bulk deletions that it would not make the transaction log growing and runing out of disk space. You can
take the table offline for maintenance, a complete reorganization is always best because it does the delete and places the table back into a pristine state.
For more information about deleting a large number of records without affecting the transaction log.
http://www.virtualobjectives.com.au/sqlserver/deleting_records_from_a_large_table.htm
Hope it can help.
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support -
How do I delete phone number in FaceTime
How do I delete phone number for FaceTime?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Cheers, Tom -
How to delete my number of ipad messages?
How to delete my number of ipad messages? I know how to turn it off on settings>Messages>Send & Receieve, but my number is saved on my dads ipad and he could switch it on at any time! I want to permanently not have my number on the ipad, thanks in advance
Hi Bran3197,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Cheers,
- Judy -
How to reuse deleted personnel number in sap
Dear All.
how to reuse deleted personnel number in sap
please help me
Regards,
Baqar IqbalIqbal
We can reuse the deleted number
Say once u have deleted all the information relaed to the pernr . Go to PA04 in the current no status give the deleted no and hire an employee in PA40
Note : this will applicable only in cretain cased so i would like to know in which context u want this -
when hiring applicant applicant number is coming multi ple of 5
first applicnt 5 and next applicant 10 and next applicant 15 like this number is coming
pls put some light on this
thanlsdear ghouse,
You have selected internal... if am wrong.
Standardly some records are existing in the tables...
go to the tables and delete the records not required..
and set the NO. RANGE STATUS as your requirement then save and process...
check once -
i need to completely delete a number from my iphone, so that when in the letter of a contact i have deleted in a new messagge it does not come up? HELP
Only by restoring your phone as a new device using iTunes, or Settings>General>Reset>Erase All Content & Settings. You follow this by syncing your content back to the phone. Either that, or you live with it. The data will be overwritten as you use your phone.
Maybe you are looking for
-
Cannot click on a picture on Safari
I recently had this problem, and someone here helped me fix it. It's happened again, and I don't recall the solution. If there is a picture on a safari website, and I click on it, it just darkens the Safari screen. I just tried clicking on a help fea
-
ADI and Excel 2007 compatibility
Hi everyone, Do you know if ADI 7.2.0.09.12 is compatible with Excel 2007? The users here at office have Excel 2007 and when trying to use ADI, the system gets hung. Thanks in advance, Jose
-
I can´t open Adobe Premiere Pro cs6 trail
Could you help me solve this? "Adobe Premiere Pro could not find any capable video play modules. Please update your video displayy drivers and start agiain"
-
Problem importing PSD or PNG with transparent background
I am using eLearning Suite 2. (CP5 Photoshop CS5) I am trying to import a PSD or PNG. I am using it as part of a master slide. It is a simple shape, with a transparent background containing a gradient overlay, inner shadow, bevel and emboss. When i
-
No Internet / IP Assigned / Chrome Works
Here is a brain buster for all those Mac lovers out there. I am running Yosemite 10.10.1 on a MacBook Pro (late 2013). The problem; - I transfer my laptop from home to work daily and switch between networks (never was a issue before) - Yesterday the