Delete hierarchy (header) from infopackage

Hi,
we're loading hierarchies from flatfile to an infoobject. Since the hierarchy is time-dependent and has versions, we need to create a new hierarchy structure / header for each new time slice and version, and the overview / the hierarchy selection in the infopackage is getting very complex.
My question is, can we delete old headers out of the selection panel, since they aren't needed anymore?
Best regards,
Knut

Hi,
Yes, Loading hierarchy from PCFile.
How to delete the hierarchy structure ? I see all temp. hierachy structure i created are shown in the infopkg. In the past I deleted the structure but forget how to delete.
I appreciate you help/feedback.
Thanks
Ramesh

Similar Messages

How to delete the Hierarchy data from Infoobjects.

How to delete the Hierarchy data from Infoobjects. In my case I had 300 records in the corresponding table of info object.
When i was trying to delete the hierarchy data, I am getting error message. "Some master data not deleted". Can any one tell me to delete all these records by using a program.

Hi
Go to SE11 and enter the hierarchy table name.
/BIC/H....(infoobject name)...and execute the table and select table entry and delete all....
Thanks
TG

How can I create a fIlter to delete only "junk" from the server?

One of my E-mail accounts is that of a major client. I handle their customer service online. Normally our protocol is to always leave all messages on the server, so for that one Thunderbird account, I have it set to never delete messages on the server.
But the account recently started getting a lot of junk messages. Thunderbird is doing a remarkable job at marking those and placing them in the junk folder for that account. I would like to create a filter that could remove them from the server, preferably those more than "x" days old so I could monitor the activity to be sure that no important message are removed.
I did notice that in "Filters" I can create a custom filter from a header of my choice, but can't seem to create what I want which is:
- after mail is marked as Junk by Thunderbird to delete those messages from the server if they are older than "X" days (my choice of "X").
- not delete any other messages from the server for that account

I believe that did it! Thank you. I am running those changes on a secondary E-Mail address for the same job and server and it appears to be working properly.

Deleting a song from iTunes library and hard drive on Itunes 11.0

how do i delete a song from iTunes library and hard drive on Itunes 11.0 at the same time.

Hello CleveCo, Inc
And welcome to Apple Discussions!
At some point in time, you may have selected the option to prevent that dialog from appearing again when trying to delete tracks from your library. To reset all of iTunes warning dialogs, click the Edit drop down menu and choose Preferences from the list (on a Mac it is *iTunes -> Preferences* ). When the window pops up, head over to the Advanced tab and click the *Reset Warnings* button. Then quit iTunes and relaunch it. That do the trick for you?
B-rock

How to delete email attachments from server

Hi,
I created an a CF template for sending e-mail which includes
attachments. It has been tested on my dev box and is functioning
fine as the attachment upload to a designated directory on the
server. I would like the attachments to be purged once the e-mail
has been forwarded to the recipent.
In Macromedia's ColdFuision 7MX web application construction
book page 913 "Interacting with Email" there is a CFC that will
delete the file when the user ends their session.
I am not sure how to write this to fit the code I am using.
Here is the eMail form

<html>
<head>
<title>Please enter your message</title>
</head>
<body>
<form action="Send_Email.cfm" method="post"
enctype="multipart/form-data">
<table width="500" border="0" align="center">
<tr>
<td width = "500" colspan="2">Please enter your e-mail
message:</td>
</tr>
<tr>
<td width="250">To:</td>
<td width="250"><input type="text" name="to_addr"
value=""></td>
</tr>
<tr>
<td>Subject:</td>
<td><input type="text" name="subject"
value=""></td>
</tr>
<tr>
<td>Message:</td>
<td><input textarea name="message" rows="5"
cols="35"></textarea></td>
</tr>
<tr>
<td width="250">Attachment #1:</td>
<td width="250"><input type="file"
name="attachment_1" value=""></td>
</tr>
<tr>
<td width="250">Attachment #2:</td>
<td width="250"><input type="file"
name="attachment_2" value=""></td>
</tr>
<tr>
<td width="250">Attachment #3:</td>
<td width="250"><input type="file"
name="attachment_3" value=""></td>
</tr>
<tr>
<td width="250"> </td>
<td width="250"><input type="submit"
name="Send_Email" value="SendEmail"></td>
</tr>
</table>
</form>
Here is the form to send the attachment.


<cfif FORM.attachment_1 neq "">

<cffile action="upload"
destination="D:\uploadsTEST\"
filefield="attachment_1"
nameconflict="makeunique">

<cfset attachment_local_file_1 =
"d:\uploadsTEST\#file.serverfile#">
</cfif>

<cfif FORM.attachment_2 neq "">

<cffile action="upload"
destination="D:\uploadsTEST\"
filefield="attachment_2"
nameconflict="makeunique">

<cfset attachment_local_file_2 =
"d\uploadsTEST\#file.serverfile#">
</cfif>
<cfif FORM.attachment_3 neq "">

<cffile action="upload"
destination="D:\uploadsTEST\"
filefield="attachment_3"
nameconflict="makeunique">

<cfset attachment_local_file_3 =
"d:\uploadsTEST\#file.serverfile#">
</cfif>

<cfmail FROM="[email protected]" to="#form.to_addr#"
subject="#subject#"
server="an001so-dby1c.pbi.global.pvt" port="25">
#message#
<cfsilent>

<cfif FORM.attachment_1 neq "">
<cfmailparam file="#attachment_local_file_1#">
</cfif>
<cfif FORM.attachment_2 neq "">
<cfmailparam file="#attachment_local_file_2#">
</cfif>
<cfif FORM.attachment_3 neq "">
<cfmailparam file="#attachment_local_file_3#">
</cfif>
</cfsilent>
</cfmail>
Here is the session application code to delete the file upon
uploading

<cfcomponent output="false">

<cfset this.name="attachmentPurge">

<cfset this.sessionManagement=true>
<cfset this.clientMangment=true>
<cffunction name="onSessionEnd" output="false"
returnType="void">

<cfset var attachDir = expandPath("Attach")>
<cfset var getFiles = "">
<cfset var thisFile = "">

<cfdirectory directory="#attachDir#" name="getFiles">

<cfloop query="getFiles">

<cfif getFiles.type neq "Dir">

<cfset thisFile =
expandPath("Attach\#getFiles.Name#")>
</cfif>
</cfloop>
</cffunction>
</cfcomponent>
The tutorial only explains how to delete the attachment when
the recipient checks there mail
in the POP server.
Assuming that the sender is in a session would the code be
written to delete the attached file from the directory on
the server one the e-mail is sent.
Can someone explain how to automatically delete email
attachments from a designated directory or provide me with the code
that would handle this after an email is sent with attachment.
Thanks,
Tony

I don't know why your dos code didn't run. It could be
addressing. My limited experience with cfdirectory/cffile/cfexecute
is to type out the complete path at least once.
Good books?
Hard to say, depends on what else you are new at. If you are
new to html, then htmlgoodies.com has good tutorials. So does
webmonkey.com. If you have trouble with sql, I have heard good
things about the SAMS book, Teach Yourself SQL in 10 Minutes by Ben
Forta. I learned javascript by buying the book Teach Yourself
Javascript in 24 Hours. The O'Reilly books are also good. I learned
awk with one of those books.
Glad you liked the fish pics. The camera is specified on most
of the pages. If it says Reefmaster, I used an external strobe. If
it says Sony I either used the camera flash only or natural light.
By the way, that is not a Cold Fusion site. It's strictly html and
javascript.

Can't delete email messages from some folders in Mail

I CAN delete email messages from header Folder "MAILBOXES" (drafts, sent, trash); however, there's another folder header below called "ON MY MAC", where I save various emails by dragging them to a subfolder, and when I try to delete these, I get this message:
"The message '(subject of email)' could not be moved to the mailbox 'Deleted Messages --- On My Mac' The destination mailbox 'Deleted Messages --- On My Mac' does not allow messages to be moved to it."
The only way to delete from this folder is to hold Control, select from the dropdown Move to, then Trash, and then one of three sub-trash folders (the one that has my email address) -- this is a pain to do.
Mail is just not working properly any more (I just added 2 other posts - one about crashing, another about all my Fonts missing)
thank you in advance!

Colin,
Have you checked Mail>Window>Previous Recipients for the old address? If not, attempt to "Remove From List" at that location and let us know what happens.
;~)

HOW TO DELETE THE ROW FROM DATABASE

hI,
Iam pasting my code below.My problem isi retrieve rows from database and display them in jsp page in rows.For each row there is delete hyperlink.Now when i click that link i should only delete the row corresponding to that delete link temporarily but it should not delete the row from database now.It should only delete the row from database when i click the save button.How can i do this can any one give some code.
thanks
naveen
[email protected]
<%@ page language="java" import="Utils.*,java.sql.*,SQLCon.ConnectionPool,java.util.Vector,java.util.StringTokenizer" %>
<html>
<head>
<meta http-equiv="Content-Language" content="en-us">
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
<meta name="GENERATOR" content="Microsoft FrontPage 4.0">
<meta name="ProgId" content="FrontPage.Editor.Document">
<title>Item Details</title>
<script>
function submitPage()
document.details.action = "itemdetails.jsp" ;
document.details.submit();
</script>
</head>
<body>
<form name="details" action="itemdetails.jsp" method="post">
<%
ConnectionPool pool;
Connection con = null;
Statement st;
ResultSet rs =null;
%>
<table border="0" cellpadding="0" cellspacing="0" width="328">
<tr>
<td width="323" colspan="4"><b>Reference No :</b> <input type="text" name="txt_refno" size="14">
<input type="submit" value="search" name="search" ></td>
</tr>
<tr>
<td width="81" bgcolor="#000099"><font color="#FFFFFF"><b>Item Code</b></font></td>
<td width="81" bgcolor="#000099"><font color="#FFFFFF"><b>Item No</b></font></td>
<td width="81" bgcolor="#000099"><font color="#FFFFFF"><b>Amount </b></font></td>
<td width="80" bgcolor="#000099"> </td>
</tr>
<%
pool= new ConnectionPool();
Utils utils = new Utils();
double total =0.00;
String search =utils.returnString(request.getParameter("search"));
if(search.equals("search"))
try
String ref_no =utils.returnString(request.getParameter("txt_refno"));
String strSQL="select * from ref_table where refno='" + ref_no + "' ";
con = pool.getConnection();
st=con.createStatement();
rs = st.executeQuery(strSQL);
while(rs.next())
String itemcode=rs.getString(2);
int item_no=rs.getInt(3);
double amount= rs.getDouble(4);
total= total + amount;
%>
<tr>
<td width="81"><input type=hidden name=hitem value=<%=itemcode%>><%=itemcode%></td>
<td width="81"><input type=hidden name=hitemno value=<%=item_no%>><%=item_no%></td>
<td width="81"><input type=hidden name=hamount value=<%=amount%>><%=amount%></td>
<td width="80"><a href="delete</td>
</tr>
<%
}catch(Exception e){}
finally {
if (con != null) pool.returnConnection(con);
%>
<tr>
<td width="323" colspan="4">
<p align="right"><b>Total:</b><input type="text" name="txt_total" size="10" value="<%=total%>"></td>
</tr>
<tr>
<td width="323" colspan="4">
<input type="button" value="save" name="save"></td>
</tr>
</table>
</form>
</body>
</html>

You mean when you click on the hyperlink you want that row to disappear from the page, but not delete the row from the database until a commit/submit button is pressed?
Personally, I think I'd prefer that you have a delete checkbox next to every row and NOT remove them from the display if I was a user. You give your users a chance to change their mind about their choice, and when they're done they can see exactly which rows will be deleted before they commit.
You know your problem, of course, so you might have a good reason for designing it this way. But I'd prefer not removing them from the display. JMO - MOD

How can I delete an item from the main left column of iTunes?

I'd like to delete an item from the main left hand column in iTunes (the column containing the main headings LIBRARY, STORE, SHARED, PLAYLISTS etc etc). Under the first heading 'LIBRARY' appear the items Library, Music, Movies, iTunes U, Books, Apps and Ringtones. I'd like to remove the item "Library" from that list - it appears immediately after the heading "LIBRARY" and serves no purpose whatsoever. (Neither does it appear to cause any harm, I must say, just a nuisance.) This item does not appear in any of the iTunes viewing options or controls lists. Neither does it appear in iTunes in the other accounts on my Mac and I have yet to see it any other iTunes on any other Mac.
I've upgraded since about iTunes 8 assuming the problem would eventually disappear through the upgrades but it hasn’t, even through all the providedupgrade increments available for iTunes.
I'm assuming it's from something I've installed in my main user account at some stage and it entered this item in the iTunes app. But I can't see how to remove it. The only things I can remember installing are "iTunes Batch Column Renamer" and "Join Together", both if which are just Scripts and which I use fairly regularly, but I don't recall either of them installing that particular item.
Is there any folder I can navigate to to edit the list of items in that main left hand column of iTunes?
Many thanks in advance for any help offered.

on second thought, that you have an item "library" is indeed odd - there shouldn't be.
suggest you try removing iTunes completely (click here and follow the instructions), then reinstall it using the standalone installer from here: http://www.apple.com/itunes/download/.
note this will not do anything to your media files, playlists, ratings, etc.
btw, you didn't install any 3rd party tools like this script:
Change Hidden iTunes Preferences v2.4
This application will allow you to invoke hidden iTunes preferences:
Show "Library" playlist
Changing view setting is global
Allow half-stars in ratings
Hide "Ping" buttons
Show/hide arrow links -- to either search the iTunes Store or search your library
Load complete iTunes Store preview before playing
Create playlists for purchased song collections
Play songs while importing or converting
Create file names with track number
Maintain grid view for Search results
Option-click zoom button for Mini Player&
Show buttons horizontally
Message was edited by: Jolly Giant

How do I delete a movie from the iTunes-cloud?

How do I delete a movie from the iTunes-cloud? I don't want to hide it I want to delete it even if it means I can't download it again..

Oh sure you can delete it from the computer. I thought that you wanted to permanently delete it so that you can never access it again. In fact, in some countries, you can delete movies and then download that again at no charge as long as you use the same Apple ID.
Launch iTunes on your computer and click on the movies tab under the Library heading, find the movie and right click on it and select Delete.

How to read the hierarchy data from the same table using loop in AMDP method

Hi All,
We have a requirement to get the top partner from BUT050 table.
Here the Top parent is nothing but the top most in the hierarchy of the partners from BUT050.
Example:
For partner 1234 (BUT050-PARTNER1) there is partner 3523(BUT050-PARTNER2) one level above
For partner 3523(BUT050-PARTNER1) there is partner 4544 (BUT050-PARTNER2) last level .
so in this case for the partner 1234 the Top parent is 4544 .
I have created AMDP Procedure method to get the top-parnet and below given is the logic implemented in AMDP method.
Here i have implemented a recursive logic with the WHILE loop to get the top most hierarchy partner from the same table BUT050
IV_Parent is the input partner and ev_top_parent is the output value.
AMDP Procedure Method:
    DECLARE lv_date VARCHAR(8) := TO_VARCHAR (current_date, 'YYYYMMDD');
    DECLARE found INT := 1;
          iv_partner1 = SELECT partner1 FROM but050
                          WHERE partner2 = iv_partner
                          AND reltyp = :iv_hierarchy
                          AND date_to >= :lv_date
                          AND date_from <= :lv_date;
     WHILE found <> 0 do
       select partner1 into ev_top_parent from :iv_partner1;
                       iv_partner1 = SELECT partner1 FROM but050
                       WHERE partner2 in ( select partner1 from :iv_partner1 where partner1 is not null)
                       AND reltyp = 'ZBP004'
                       AND date_to >= :lv_date
                       AND date_from <= :lv_date;
       select COUNT ( partner1 ) INTO found FROM :IV_PARTNER1;
    END WHILE;
This method is working fine, but here it is only taking one single partner and getting the top parent as output.
Now i would like to convert this mehtod so as to accept n number of partners (not one single partner) as input and should process each partner to get the top parent.
Could anyone guide me how can i handle the given AMDP method further so as to work some how it is within another loop from other AMDP method.
Thanks.
Regards,
Laxman.P

Hi
Go to SE11 and enter the hierarchy table name.
/BIC/H....(infoobject name)...and execute the table and select table entry and delete all....
Thanks
TG

Error while deleting any component from the widget

Whenever i delete any component from widget it stops running..i means whenever after deleting i execte the widget nothing happens.........it gives me an error saying
"Syntax Error in line 1 " and no other information....so can anyone tell me how to resolve this????????

Hello,
This might happen when you delete Header or Footer from widget. It is already corrected in latest version of Tools. Workaround is to add dummy view that is not used anywhere in widget but contains Header and Footer.
Eriks

How to delete the values from TKOMV at runtime after creating PO

Hi,
How to delete the values from TKOMV at runtime after creating PO from IDOC. I am creating PO through IDOC, subsequently need to create Sales order and again need to create 2nd PO with reference of Purchase Requestion(created with sales order). At the time creation of 2nd PO the Header conditions are appearing twice and net price value is appearing wrong.
Thanks in advance.

Hi Padma
Can you do this activity once the company code is in to production. I guess you can not do this activity, if the company code is already in to live. Setting or resetting of the recon accounts will hinder the previous actitivity. Infact resetting of the company code is also not a good option.
Any how, thanks for the inputs. Please let me know whether i can do this activity only at the subledger level which will not impact other modules. The one solution i can figured out is , reverse all the transactions for the corresponding asset in the year of takeover and pass the entries again in the same year correctly which will have effect in Subledger and also in general ledger. But the business people will not allow this, since for a big client it will require lot of authorizations and approvals. Infact the vendor also, is cleared. So we have to reverse the cleared documents as well which is again a task and require approvals as well.
Thanks and regards
Seshu.

HT4236 I've run out of room on my hard drive. I bought an external drive and exported all my albums to the external drive then deleted the albums from iPhoto. I want to sync both from my ext drive and new albums in iPhoto. No dice. Help!

I've run out of room on my hard drive. I bought an external drive and exported all my albums to the external drive then deleted the albums from iPhoto. I want to sync both from my ext drive and new albums in iPhoto. My photos on the devices get wiped out when I sync to iPhoto since I deleted all the albums. But when I sync to my hard drive (where I maintained the album structure) the photos are copied to my iPad but lose all the hierarchy and folder structure. Now I have to scroll through thousands of photos to try to find the one I'm looking for. Before I sync any more devices I want to know the following: 1) can I restore the album structure on my iPad by using the photo cache? 2) is there a way to sync both new iPhoto albums AND pictures in the folders in my hard drive? And 3) how can I keep the photo hierarchy structure from my hard drive intact on my devices?

TigerMom28 wrote:
I've run out of room on my hard drive. I bought an external drive and exported all my albums to the external drive then deleted the albums from iPhoto.
Don't do that.
Copy /Photos/Photo library/ to the external.
Hold Option and launch iPhoto.
Select Choose library and select the Photo library you copied to the external.

How to delete the data from KNVP without using the delete statement

Hello friends,
I have a requirement that I have to delete the data from KNVP table without using any delete statement. For it I have to use the Standard BAPI or any standard program.
Can you please tell me the name of the standard program or BAPI to delete the data .
Thanks in Advance
Kuldeep

Hello Raymond,
I have use the function 'CUSTOMER_UPDATE' in which I only gives the data in T_XKNVP table only but still the data is not get deleting. Please see the code below.
=============================================================
REPORT ZK_TEST2                                .
data :
    I_KNA1     LIKE     KNA1,
    I_KNB1     LIKE     KNB1,
    I_KNVV     LIKE     KNVV,
    I_YKNA1     LIKE     KNA1,
    I_YKNB1     LIKE     KNB1.
Data :
T_XKNAS       LIKE     FKNAS occurs 0,
T_XKNB5     LIKE     FKNB5 occurs 0,
T_XKNBK     LIKE     FKNBK occurs 0,
T_XKNVA     LIKE     FKNVA occurs 0,
T_XKNVD     LIKE     FKNVD occurs 0,
T_XKNVI     LIKE     FKNVI occurs 0,
T_XKNVK     LIKE     FKNVK occurs 0,
T_XKNVL     LIKE     FKNVL occurs 0,
T_XKNVP     LIKE     FKNVP occurs 0 with header line,
T_XKNVS     LIKE     FKNVS occurs 0,
T_XKNEX     LIKE     FKNEX occurs 0,
T_XKNZA     LIKE     FKNZA occurs 0,
T_YKNAS     LIKE     FKNAS occurs 0,
T_YKNB5     LIKE     FKNB5 occurs 0,
T_YKNBK     LIKE     FKNBK occurs 0,
T_YKNVA     LIKE     FKNVA occurs 0,
T_YKNVD     LIKE     FKNVD occurs 0,
T_YKNVI     LIKE     FKNVI occurs 0,
T_YKNVK     LIKE     FKNVK occurs 0,
T_YKNVL     LIKE     FKNVL occurs 0,
T_YKNVP     LIKE     FKNVP occurs 0 with header line,
T_YKNVS     LIKE     FKNVS occurs 0,
T_YKNEX     LIKE     FKNEX occurs 0,
T_YKNZA     LIKE     FKNZA occurs 0.
T_XKNVP-KUNNR     =     '7000002648'     .
*T_XKNVP-VKORG     =     '0001'     .
*T_XKNVP-VTWEG     =     '01'     .
*T_XKNVP-SPART     =     '01'     .
T_XKNVP-KZ      =     'D'     .
append T_XKNVP to T_XKNVP.
CALL FUNCTION 'CUSTOMER_UPDATE'
EXPORTING
    I_KNA1        = I_KNA1
    I_KNB1        = I_KNB1
    I_KNVV        = I_KNVV
    I_YKNA1       = I_YKNA1
    I_YKNB1       = I_YKNB1
TABLES
    T_XKNAS       = T_XKNAS
    T_XKNB5       = T_XKNB5
    T_XKNBK       = T_XKNBK
    T_XKNVA       = T_XKNVA
    T_XKNVD       = T_XKNVD
    T_XKNVI       = T_XKNVI
    T_XKNVK       = T_XKNVK
    T_XKNVL       = T_XKNVL
    T_XKNVP       = T_XKNVP
    T_XKNVS       = T_XKNVS
    T_XKNEX       = T_XKNEX
    T_XKNZA       = T_XKNZA
    T_YKNAS       = T_YKNAS
    T_YKNB5       = T_YKNB5
    T_YKNBK       = T_YKNBK
    T_YKNVA       = T_YKNVA
    T_YKNVD       = T_YKNVD
    T_YKNVI       = T_YKNVI
    T_YKNVK       = T_YKNVK
    T_YKNVL       = T_YKNVL
    T_YKNVP       = T_YKNVP
    T_YKNVS       = T_YKNVS
    T_YKNEX       = T_YKNEX
    T_YKNZA       = T_YKNZA
=============================================================

How to get report for deleted line items from sales orders

Dear FRIENDS,
please infirm the t.code or report for viewing the deleted line items from sales ordrers.
Kindly do the neeedful.
regards,
N.M.PAWAR

Hi,
With transaction SE16 you can view table CDHDR for header changes and
CDPOS for item changes. This includes deletion.
OR
GO to VA03 - Display Sales order -> Put order no : don't press enterbutton. -> Go to Enviornment -> changes -> You will get details
Date ItmNo. SLNo Action
Hope this help please close the thread if answers

Delete hierarchy (header) from infopackage

Similar Messages

Maybe you are looking for