Delete memory Id when the session is still active

Hi all,
Can anyone tell me how to clear the Memory Id when the session is still active.
I am getting the amount value through Memory Id from import and export parameter when I am posting the check. Again if I reprint the check without closing the session the amount value is getting double evertimes.
If I delete from Memory Id I am not able to see any amount value while posting for first time.
Can anyone suggest me how to proceed further.
Regards
Yathish

Looks like you are not clearing the variables before and after that logic. Clear them and try.
Let us if you are doing that or not.
Rgds,
Naren
Message was edited by:
        Someneni

Similar Messages

  • Why a low memory error when the iPhone 4 still has plenty of storage?

    In diagnostics I had a low memory error. This is just a little of some of what I think is called a snap shot?
    LArgest process: meddiaserverd
    EscrowSecurityAI<298081b.......
    MobileMail<f262d66a......
    FaceTime<5796d685.......
    also camera, identity services, CVMServer...and many more but I am confused most with the line that said itunesstored.  I can provide more info if necessary. There's 8.4 available on the phones internal storage so I'm concerned about this error. I appreciate any info at all. Thanks

    I will need to read up on this before I have more discussions. I better make this short if you don't mind one more inquiry. I work almost soley from my phone. I have a store on the Internet. My husband however uses his phone very little but his is the one saying low memory and some areas he has way more data and we can't figure it out. I have 4000 and more emails he has 300 but he has over 300mb more in use. Same with home screen, security, messaging service. His google browser also three times more data than mine and I'm sure my phone has became a part of my hand cause I am always working and I never had low memory and I would think I'd have way more data. He has 7 apps I have 47. Any ideas why. Could someone have hacked his phone

  • Is it possible to auto delete directory when the session expires?

    I create a directory for each session based on the unique session id e.g. c:\website\8D143E46EA18FAEFEF4D807180A307E2
    Is it possible to auto delete this directory when the session expires?

    thanks
    i found this great link which teach how to use HttpSessionListener, in case someone has the same problem as me.
    http://www.stardeveloper.com/articles/display.html?article=2001112001&page=1

  • Session is still active?

    how can i understand if my user session is still active?
    thankss

    You can detect if a session is new using the session.isNew() method.
    Also you can compare the requested session id (request.getRequestedSessionId()) with the actual session id. If they are the same then the session was still active. If not, then the session expired.

  • [svn] 2692: Bug: BLZ-227 - When using JMS Destination, MessageClient and FlexClient not released from memory when the session times out .

    Revision: 2692
    Author: [email protected]
    Date: 2008-07-31 13:05:35 -0700 (Thu, 31 Jul 2008)
    Log Message:
    Bug: BLZ-227 - When using JMS Destination, MessageClient and FlexClient not released from memory when the session times out.
    QA: Yes
    Doc: No
    Checkintests: Pass
    Details: Fixed a memory leak with JMS adapter. Also a minor tweak to QA build file to not to start the server if the server is already running.
    Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-227
    Modified Paths:
    blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/services/messaging/adapters/J MSAdapter.java
    blazeds/branches/3.0.x/qa/build.xml

    Revision: 2692
    Author: [email protected]
    Date: 2008-07-31 13:05:35 -0700 (Thu, 31 Jul 2008)
    Log Message:
    Bug: BLZ-227 - When using JMS Destination, MessageClient and FlexClient not released from memory when the session times out.
    QA: Yes
    Doc: No
    Checkintests: Pass
    Details: Fixed a memory leak with JMS adapter. Also a minor tweak to QA build file to not to start the server if the server is already running.
    Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-227
    Modified Paths:
    blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/services/messaging/adapters/J MSAdapter.java
    blazeds/branches/3.0.x/qa/build.xml

  • Leaving excel Inplace, the excel session is still active

    I all,
    I use the Excel Inplace method to format data in PivotTables. I use a template based on sap_MM.xls with the procedure Public Sub ALV_CUS_Exit (). It is working correctly.
    My problem happens when I leave the transaction and return to the initial screen. The excel session is still active causing blockages in the Excel application itself
    I looked at the OSS note 122539: it describes functions which do not yet exist in the SAP delivery for certain events. I have tried those functions with the SAP declaration like :
    public sub customer_workbook_deactivate()
        Me.Application.Quit
    End Sub
    Either I use the wrong syntax or I do not set the code in the correct place of the VBA project, I have never activated these functions while leaving the screen excel inplace.
    Can you guide me to a solution ?
    In advance thank you very much.

    Thanks, but my first problem is that I do not pass through the procedure. Once I pass through it I'll try  "me.quit()".
    Regards.

  • Redirect to main jsp when the session expires

    Hi,
    I have a jsp say mainframe.jsp in which I have two frames each having a jsp page say child1.jsp and child2.jsp.
    When the session expires and I when i try do any changes in child2.jsp or child1.jsp, the page redirects to login page and when I login successfully, I am getting redirected to child2.jsp or child1.jsp respectively. But I want it to be redirected to mainframe.jsp.
    Any help is greatly appriciated.
    Thanks in advance.
    Vinod

    I think I am not clear.
    When I try to login after session expiry, I am redirected to child jsp.
    But what I want is that I should be redirected to mainfram.jsp page.
    url in the address shows : ../mainframe.jsp?ID=******
    When my seesion is expired and I try do some manipulation in child1.jsp (which is inside a frame of my mainframe.jsp). it is redirected to login page and from there to child1.jsp instead of mainframe.jsp
    Now the address url shows : ../child1.jsp?ID=********* because of which I am not able to see child2.jsp along with child1.jsp
    What I want : ../mainframe.jsp?ID=********
    this is the code I am using !!
    String destPage = request.getRequestURI();
    response.sendRedirect("../redirect.jsp?dest=" + URLEncoder.encode(destPage));

  • How do I close a connection when the session ends?

    I have a website that is using JavaMail to display a user's mail through the browser. I'd like to keep the connection to the mail server open during the whole session that the user is logged in, in order to improve response time. The problem is, I can't detect if a user closes their browser so that I can close the connection to the server.
    Is there a way for me to close the mail server connection when the session ends?
    Thanks.

    Create session listener, Impliment sessionDestryoyed
    method with your connection close statements.I was wondering how to use the listener for a Servlet as well, what would you type in that method to close the connection?.
    public class ServletListener
         implements
              ServletContextListener,
              ServletContextAttributeListener,
              HttpSessionListener,
              HttpSessionAttributeListener
    public void sessionDestroyed(HttpSessionEvent arg0)
              //System.out.println( arg0 );
    }

  • Custom web parts in SharePoint 2013 becomes inactive when the session is idle for long time.

    Hi,
    We have a search center site with custom web parts and custom master pages. When the session is inactive for long time all the custom web parts in the page doesn't work, unless we close the browser and open it. Where as this is not the case with the
    OOB web parts. We are not able to identify the root cause as it works with OOB web parts and not the custom web parts.We were able to find that by increasing the session timeout of the web application we can avoid this issue.We do not want to increase the
    session timeout as the OOB web part works perfectly even when the user session is idle for long time.Is there any other alternative where we can acheive the same for custom web parts when the session is idle for long time?
    Thanks,
    Saranya

    Hi Saranya,
    According to your descirption, my understanding is that when the session is long time idle ,then custom web part will not work.
    I suggest you check if you have enable the session in the Page Level in the web.config. By default SharePoint disable the session state.
    In the web.config, you will see <page enableSessionState> tag. You can modify like below and test if it works.
    <pages enableSessionState=”true” ….. />
    Here is a detailed thread for your reference:
    Use Session State in SharePoint
    Best Regards
    Zhengyu Guo
    TechNet Community Support

  • How does c:url tag know when the session is cookieless and thus to redirect

    i have been looking at the source code for c:url tag and can't figure out how they are doing that. I need a way to do that in a jsp, to check if the cookies are allowed or not.

    how does c:url tag know when the session is cookieless and thus to redirecthuh?
    What do cookies have to do with redirecting?
    Cookies get encoded into a URL using the method in HttpServletResponse: response.encodeURL() or encodeRedirectURL().
    That method determines whether or not it prints out the session id as part of the url, or it gets uses cookies.
    You can try: request.isRequestedSessionIdFromCookie().
    If that is true, you know that session cookies are supported (or at least that one was)

  • HT3275 Time Machine not deleting oldest backups when the disk is full

    Time Machine not deleting oldest backups when the disk is full

    Unfortunately, when this happens, Time Machine cannot erase enough space to create room for the new backup. Your options now are:
    1) Add a new Time Capsule or a hard drive to the USB port on the existing Time Capsule and continue with backups
    2) Manually delete backups from Time Machine....which is a long and tedious process.  After a few hours, not much space will be reclaimed and it will not be long before the Time Capsule is full again
    3) Erase the Time Capsule....if you really do not need all the old backups from months ago....and start over with a new Time Machine backup and move forward again

  • Alert when the session Expires

    Hi Everybody,
    I am doing a web based application in JSF ,in that I want to make an pop up or an alert message automatically when the session expires.please give me valuable inputs on this regardings...
    Thanks in Advance

    Hi,
    yes...I have tested correctly.But here I am giving <a4j:support> to specify the dropdown listbox action.only for this reason the form is not submitting when I use dropdownlist..for ur reference here is a sample code
    <h:selectOneMenu id="animalNameCombobox" value="#{Animal.animalName}" styleClass="sampleDropDownListBox">
                                        <f:selectItems value="#{Animal.animalItemList}"/>
                                        <a4j:support action="#{Animal.animalComboboxAction}" event="onchange" reRender="animalOutputPanel"/>
                                    </h:selectOneMenu>I have given all this within <a4j:outputpanel>..Is there any remedies are there to resolve this issue...please give me a valuable inputs and suggestion on this regardings..
    Regards

  • How do I delete a user when the password was forgotten.  I have a OS X Yosemite 10.10.2

    How do I delete a user when the password was forgotten.  I have a OS X Yosemite 10.10.2

    Administrator password forgotten?
    OS X 10.7 Lion, 10.8 Mountain Lion, 10.9 Mavericks and 10.10 Yosemite
    Reset Password
    Start the computer,then press and hold down command and R keys to start into recovery partition.
    When you see the Apple logo, release the keys.
    Wait until  OS X Utilities window shows up.
    Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
    from the drop down.
    Terminal window will appear.
    Type in   resetpassword   and press enter on the keyboard.
    Leave the Terminal window open.
    Reset Password Utility window will open with Macintosh HD selected.
    Select the user account from the popup menu box under “Select user account”.
    Enter a new password.
    Reenter the new password for the user.
    Enter a hint.
    Click the "Save" button.
    Click  in the menubar and select Restart.
    Log in.
    If Keychain dialog box appears, select “Create New Keychain”.

  • Key down event handeling when the VI isn't active

    Hi
      I've written a simplel VI that increases or decreases a numerical indicator depending on which key is pressed on the keyboard. But this only works when the VI window is active (the titlebar is blue and not gray). Is there anyway to listen for the key-down event even though the VI is not active?
    In advance thanks
    Georg

    I recently ran into a problem with the Acquire Data.
    See http://forums.ni.com/ni/board/message?board.id=170&message.id=147363
    Just in case....

  • TS3694 What happens when the iPhone needs an activation and it doesn't respond? Then it asks me to restore it but due to an unknown error (-1) the iPhone can't be restored.

    What happens when the iPhone needs an activation and it doesn't respond? Then it asks me to restore it but due to an unknown error (-1) the iPhone can't be restored.

    Thank you for your response. However, I have done that plenty of times and each time I try to restore my phone, it extracts the software and then when it says restoring with the loading bar, an error message comes up saying an unknown error has occurred.

Maybe you are looking for