Delete the data content for one InfoObject in processchain
Hi Guys,
We have requirement to delete the data content for one InfoObject in processchain(daily) .We made this infoObject as InfoProvider.
Could you please tell me is there any function module or abap program or any other alternative to do this and which can be added to processchain.
We made this infoObject as InfoProvider.
Thanks
Prasanna
just use the RSPC-maintenance screen and look for "deletion of requests from PSA" or something like that.
Add it in the Processchain, run it...c'est tout.
Similar Messages
-
I want to delete the data content for InfoObject in processchain
Hi Guys,
We have requirement to delete the data content for one InfoObject in processchain(daily) .Could you please tell me is there any function module or abap program or any other alternative to do this and which can be added to processchain.
Thanks
Prasannafm RSDMD_DEL_MASTER_DATA
REPORT Z_DEL_MASTER.
tables : RSDIOBJ.
select-options:
s_iobj for RSDIOBJ-IOBJNM.
start-of-selection.
loop at s_iobj.
call function 'RSDMD_DEL_MASTER_DATA'
exporting
I_IOBJNM = s_iobj-low
I_FLG_DELETE_ALL = 'X'
I_FLG_DELETE_SIDS = 'X'
I_FLG_DELETE_SIDS_ASK
I_FLG_DELETE_TEXTS = 'X'
I_T_CHAVL =
I_FLG_DIALOG = ''
I_FLG_FORCE_DELETE = 'X'.
I_FLG_SIMULATION = ''
I_WITHOUT_PROTOCOL = ''
endloop.
Re: Deleting Master data
Cleanup of Master Data
Re: Functionmodule RSDMD_DEL_MASTER_DATA -
Need to skip the data load for one of the sub chain.
Hi All,
In our project, we have one meta chain and have many sub chains inside that. Today we don't want to run one of the sub chain. As we are in BW7.0, Skip options are not available. Can you please help how to stop the data load for the particular sub-chain.Please suggest.
Thanks.Hi Jalina,
If this is a frequent request then you can create a custom ABAP Program and then use the below simple logic to skip/run the meta chain, but you will also have to change the link between the sub chains as "Always" instead of "Successful" so that no matter if the dependent chain is successful OR not the nex chain will proceed. If you are comfortable with event then you can also use event to achieve this
Program Logic- Create a new table where you maintain meaningful values (indicator/description) in it and the program should read the data from the table, Based on the values in the table the program will be successful/fail
Thanks
Abhishek Shanbhogue -
Hello Everyone,
We would like to implement a script to delete the offline files in the Client Side Cache (CSC) for a nominated user (on Windows 7 x64 enterprise).
I am aware that;
1. We can use a registry value to flush the entire CNC cache (for all users) next time the machine reboots.
2. If we delete the user's local profile it appears that Windows 7 also removes their content from the local CSC.
However, we would like to just delete the CSC content for a particular nominated user without having to delete their local user profile.
In our environment we have many users that share workstations but only use them occasionally. We don't use roaming profile so we would like to retain all the users' local profiles but still delete the CSC content for any users that haven't
logged on in a week.
Any ideas or info would be appreciated !
Thanks, MakesHi,
I don't think this is possible.
If you want to achieve it via script, I suggest you post it in official script forum for more professional help:
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?category=scripting
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Karen Hu
TechNet Community Support -
Updating iTunes always deletes the data file behind my music in my library
Hopefully, someone can help me. Everytime I update my iTunes, it somehow deletes the data files for my songs even though the song still appears in my library. When I go to listen or sync to my ipod it says it can't find the original data files and so I have to re-load all my CDs again, so I just basically don't update itunes anymore.
Can anyone tell me why this is going on and how I can stop this from happening so that I can update itunes without losing all my songs?
Thanks a bunch in advance!This appears to be a common problem lately on some computers ...try the following:
Disconnect any iPod from the computer
Temporarily remove any hackies or beta apps
Make sure iTunes is in the original Apple install location=Applicatons Folder
Refer to these Apple info docs:
http://docs.info.apple.com/article.html?artnum=301749e
http://docs.info.apple.com/article.html?artnum=93313
Remember .... Seek and Ye shall find!!
DIXIE -
My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.
My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.
-
Recently, U2 music appeared on my ipod without my requesting it or wanting it. I was able to delete all of the songs except for one. How do I delete the last one from my ipod? The song does not show up in iTunes when I plug my ipod into the computer. The version installed on my ipod is 7.1.2(11D257).
Hi donfrommars,
Welcome to the Apple Support Communities!
Please use the following article for information and instruction on deleting the U2 album from your devices and account.
Remove iTunes gift album "Songs of Innocence" from your iTunes music library and purchases
Have a great day,
Joe -
Error in Installing the Business Content for 2LIS_06_INV data source
Hi Experts,
We are trying to install the Business content for 2lis_06_inv. When we replicate the datasource, we are not seeing it in 3.x version. It is only vailable in 7 version. There is no transformation available in Business content for this data source. Please let me know how we need to proceed with this installation. Should we install the 7.0 flow or 3.x flow? Please provide th details if you have implemented th same in your system. Thanks is advance.
Regards,
Kavitha JagannathHi,
Follow bellow steps:
1. Goto RSA1.
2. Select the BI content.
3. Select the Grouping as' In Dataflow before and after'
Then,you can get the data flow which are haveing the DS/TR/Data targets.
4. Select the Install by setting the 'Install in background'.
Regards. -
Need to delete the data before the INIT runs for an infocube.
I have creates a infocube and loading the data through delta update.
The dats is for 12 periods.
But in my reporting wrong data is showing for period 3. So I want to run the Inti update once for period 3.
For doing this do I need to delete the already existing data in the infocube for period 3 or will the new init replace the old data for period 3.
Please help me in answeringYou need to delete 3 months data first using selection deletion option in cube and do a full load for this 3 months again.
Ravi -
How to delete the data in P,Q and S table
Hi All,
I want to delete the data in /BIO/PCOSTCENTER, /BIO/QCOSTCENTER AND /BIO/SCOSTCENTER. Since we have transported the costcenter infoobject from 3.0B to BI 7. But the 3.0B doesnot contain the ALPHA conversion. So we need to delete the infoobject and install from BI content.
When I am trying to activate the BI 7 obj, It is giving the error message the above tables are containing the data.
Pls suggest how to delete them and activate the 0COSTCENTER with BI 7 version.
Points will be awarded.
Thanks
SathiyaProgram RSDMD_DEL_BACKGROUND is the appropriate choice to delete master data. You should be able to search OSS notes on te pgm to get a little more info on it.
It insures referential integrity by checking all InfoProviders to make sure a master data value for that InfoObject does not exist in any InfoProviders. This might not be an issue in your case if you are dealing with a newly activated object that you have don't have in any Infoproviders, but is the only the best way to delete master data. -
How can we delete the data in e-fact table.
how can we delete the data in e-fact table.
hii,
You cannot delete the request individually but you can one of the following:
1. Do a selective deletion from the cube. RSA1 -> Cube -> Contents -> selective deletion.
2. Delete all the data in the cube and then reconstruct only the required request ids. This would work only if you have the PSA available for all the requests.
3. Reverse posting is another possibility.
hope it helps,
partha -
Short Dump while Complete deletion of data Contents from a Cube.
Hello Experts,
I am facing a runtime Short dump whenever i attempt to delete data from a Cube. Shown Below:-
Runtime Errors MESSAGE_TYPE_X
Error analysis
Short text of error message:
Data request to the OLTP
Long text of error message:
Technical information about t
Message class....... "RSM"
Number.............. 000
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"SAPLRSM1" or "LRSM1U43"
"RSSM_UPDATE_RSBKREQUEST"
Information on where terminated
Termination occurred in the ABAP program "SAPLRSM1" - in
"RSSM_UPDATE_RSBKREQUEST".
The main program was "RSAWBN_START ".
In the source code you have the termination point in line 117
of the (Include) program "LRSM1U43".
Line SourceCde
87 call function 'RSSTATMAN_GET_TYPE_FOR_DTA'
88 exporting
89 i_dta = l_dta
90 importing
91 e_type = l_dta_type
92 exceptions
93 error = 1
94 others = 2.
95 if sy-subrc <> 0.
96 message id sy-msgid type sy-msgty number sy-msgno
97 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
98 endif.
99 call function 'RSSTATMAN_DELETE_STATUS'
100 exporting
101 i_dta = l_dta
102 i_dta_type = l_dta_type
103 i_process = 'ALL'.
104
105 sort l_t_iccont by rnsidlast ascending.
106 loop at l_t_iccont.
107 data: l_s_reqdone like rsreqdone.
108 select single * from rsreqdone into l_s_reqdone where
109 rnr = l_t_iccont-rnr.
110 if sy-subrc <> 0.
111 read table l_h_dtpreq with key
112 requid = l_t_iccont-rnsidlast.
113 if sy-subrc = 0 and
114 ( l_h_dtpreq-ustate = '0' or l_h_dtpreq-tstate = '0' ).
115 clear l_s_reqdone-archived.
116 else.
>>>>> message x000.
118 endif.
119 endif.
120 if l_s_reqdone-archived <> rs_c_false.
121 call function 'RSREQARCH_RELOAD_REQUEST'
122 exporting
123 i_rnr = l_t_iccont-rnr.
124 endif.
125 select single * from rsbkrequest into l_s_req where
126 requid = l_t_iccont-rnsidlast.
127 if sy-subrc <> 0.
128 continue.
129 endif.
130
131 read table l_h_rsbkdtp with table key
132 dtp = l_s_req-dtp.
133 if sy-subrc <> 0.
134 l_h_rsbkdtp-dtp = l_s_req-dtp.
135 insert table l_h_rsbkdtp.
136 endif.
This issue only exists in Production system not QTY or development thr Cube deletion is working fine.
So far I have tried Deleting Index's and then deleting the Cube Contents & Run Elementary Checks from RSRV but not find any lead yet.Also unable to find appropriate notes for this issue aswell I am using SAP_Bw comp 700 with SP26.
Any suggestion would be of great help .
Thanks & Regards
AmanHi Ap_SAP & Arvind,
Any recent upgrades or system refresh done?
In recent update just from SP24 to SP26 was updated and a DB stats Referesh was carried on.But this proublem existed before these activities.
Except deleting can you able to perform all other operations like loading data..etc?
Other than deletion I am able to do load data into cube extract from R3 and also i can delete data from PSA.Only deletion giving dump.
You are trying to delete transactional or master data.
I am tring for transaction data.
WHen I try to delete request by request it also lead to the same short dump.
@ arvind : I checked Sm12 there i see not table which has been locked.
Thanks
Aman -
While deleting the data from cube..getting the following erros...
while deleting the data from cube the below error occured in develoment..any help
i have 4 requets.....2 are deltedd but no records for those...
2 are not deleted and they have some data..
please give me u r inputts pelase
Performing check and potential update for status control table
Message no. RSM1490
Diagnosis
If data is loaded into an InfoCube, or existing data is edited (aggregated/compressed/deleted/got from a DataMart), then there is a change in the potential reportability of the data , or the possibility of deleting data by request, or of aggregating or compressing.
This status of each one of these Cubes is stored in a status table, that is updated when there is any change to the status of a request in the Cube.
The system now analyzes the requests in the Cube and compares the calculated status with the status table.
If deviations from the status table arise then you are given the option of adjusting the status table.
System Response Procedure Procedure for System AdministrationHi,
Did you tried by right click on cube and delete data? are those requests are compressed or roll up? -
SQL query and Delete the data based on condition
Hi All,
I have one requirement like I need to fetch the data from the table, In that table one filed (XXXXX) domain type is STAMP.
delete the data if the sy-datum ( length 8) is greater than field XXXXX which has length 14.
Please suggest me how to delete or fetch the data with the same length.
I have used below code..but did not work..
"Concatenate sy-datum '%' into gv_var1.
select *
from DD03l
into itab
where XXXX like gv_var1."
and tried this one as well
1. DELETE itab WHERE XXXXX GT sy-datum.
2. DELETE itab WHERE XXXXX GT gv_var1.Hi,
When dates are in different formats you have to always convert them into one common format and then do the checks. Its better to convert the date in the variable into timestamp(using CONVERT DATE statement-look for abapdocu for its usage) and then compare it with the date on database.
data: gv_var1 TYPE timestamp.
convert date sy-datum into time stamp gv_var1.
select *
from DD03l
into itab
where XXXX like gv_var1.
should work now.
Hope this helps.
Shwetha -
How shall I delete the data from R/3 setup tables
Hi Experts,
How shall I delete the data from R/3 setup tables
Regards
SailekhaHi Sailekha , to delete the set up table in r/3 either u can go to tcode LBWG as already mentioned or u can also delete the same from tcode SBIW
Settings for Application-Specific DataSources (PI) -
Logistics -
Managing Extract Structures -
Initialization -
Delete the Contents of the Setup Tables .
Just click the clock there then u hace toi juct give the application component name like for Inventory 3 , then execute it , it will delete the set up table for inventory ..
Regards..
Maybe you are looking for
-
ITunes 64 setup won't complete on y Vista 64 bit OS
Hope someone can help.... I've just purchased and set up a new Dell XPS running Vista Home Premium 64bit OS. Its a remarkable machine (lightning quick) however I wasn't aware that this 64 bit OS is an obstacle to some programs....I've worked out solu
-
Problem connecting MBP to HDTV
I ordered a DVI to HDMI cable and hooked it up to the my Toshiba HDTV and I get a picture, unfortunately it's not what I'm looking at on the MBP. Strangely it is the blue design that is the desktop background when you pull the MBP out of the box and
-
No sound only thing available is digital out
I have tryed reading different things in regards to having no sound on the i-mac and still on sound. Have rebooted. Only thing available is Digital Out. show volume in menu bar not working mute button greyed out Not much point in having i-tunes ca
-
hi , anybody tell why error this coming. ''Comma without preceding colon (after INSERT ?)''. INSERT INTO KNA1(KUNNR,ANRED,NAME1,PFACH,STRAS,PSTLZ,ORT01, TELF1,TELFX) VALUES(
-
Hi All , What are the steps to create a new form class from scratch , without copying an existing form class. When we create a new from class how to select trhe structure or table to be used as Table/Structure in attributes in Form Level , 1:1 le