Need to skip the data load for one of the sub chain.

Hi All,
In our project, we have one meta chain and have many sub chains inside that. Today we don't want to run one of the sub chain. As we are in BW7.0, Skip options are not available. Can you please help how to stop the data load for the particular sub-chain.Please suggest.
Thanks.

Hi Jalina,
If this is a frequent request then you can create a custom ABAP Program and then use the below simple logic to skip/run the meta chain, but you will also have to change the link between the sub chains as "Always" instead of "Successful" so that no matter if the dependent chain is successful OR not the nex chain will proceed. If you are comfortable with event then you can also use event to achieve this
Program Logic- Create a new table where you maintain meaningful values (indicator/description) in it and the program should read the data from the table, Based on the values in the table the program will be successful/fail
Thanks
Abhishek Shanbhogue

Similar Messages

Delete the data content for one InfoObject in processchain

Hi Guys,
We have requirement to delete the data content for one InfoObject in processchain(daily) .We made this infoObject as InfoProvider.
Could you please tell me is there any function module or abap program or any other alternative to do this and which can be added to processchain.
We made this infoObject as InfoProvider.
Thanks
Prasanna

just use the RSPC-maintenance screen and look for "deletion of requests from PSA" or something like that.
Add it in the Processchain, run it...c'est tout.

Modify the Data Load wizard to remove the check for unique columns

Hi,
I'm trying to make a Data Loading Wizard into my application, which basically works nice except for one thing:
I want to remove the check for unique columns, and insert ALL data which the users wants to upload.
(Like the Data load utility under development).
The reason is, that the data I want to upload is an export from my bank statements (in XLS / CSV format)
And these exports don't have any primary key.
Using the Apex wizard created Data Upload pages, I will loose data in case I had two identical payments in a day.
Is there a way to do this, while keeping the pages created by the wizard to make Data Loading pages?
apex 4.2.1

I would suggest to load the data into a view and process the records into the real table(s) with instead-of-triggers. When you add a "1=2" where clause to the view, there never is any data and everything will be loaded.
Otherwise you have to have a "real" PK value, like a timestamp or a statement_nr+line_nr.

Error with Informatica when running the data load for BI Apps

Hi All,
We are facing a different issue on prod which we haven't got on QA. Below given is session log :
Target tables:
W_ORDER_PARTY
READER_1_1_1> RR_4050 First row returned from database to reader : (Wed Sep 22 10:36:16 2010)
READER_1_1_1> BLKR_16019 Read [885] rows, read [0] error rows for source table [S_ORDER_BU] instance name [S_ORDER_BU]
READER_1_1_1> BLKR_16008 Reader run completed.
LKPDP_1> DBG_21097 Lookup Transformation [LKP_ETL_PROC_WID]: Default sql to create lookup cache: SELECT ETL_PROC_WID,ROW_WID FROM W_PARAM_G ORDER BY ROW_WID,ETL_PROC_WID
LKPDP_1> TE_7212 Increasing [Index Cache] size for transformation [LKP_ETL_PROC_WID] from [1048576] to [1050000].
LKPDP_1> TM_6660 Total Buffer Pool size is 609824 bytes and Block size is 65536 bytes.
LKPDP_1:READER_1_1> DBG_21438 Reader: Source is [SFAPROD1], user [siebel]
LKPDP_1:READER_1_1> CMN_1021 Database driver event...
CMN_1021 [DB2 Event Using Array Inserts. connect string = [SFAPROD1]. userid = [siebel]]
LKPDP_1:READER_1_1> BLKR_16003 Initialization completed successfully.
LKPDP_1:READER_1_1> BLKR_16007 Reader run started.
LKPDP_1:READER_1_1> RR_4049 SQL Query issued to database : (Wed Sep 22 10:36:17 2010)
LKPDP_1:READER_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
LKPDP_1:READER_1_1> RR_4035 SQL Error [
*[IBM][CLI Driver][DB2/AIX64] SQL0204N "SIEBEL.W_PARAM_G" is an undefined name. SQLSTATE=42704*
sqlstate = 42S02
Database driver error...
Function Name : Execute
SQL Stmt : SELECT ETL_PROC_WID,ROW_WID FROM W_PARAM_G ORDER BY ROW_WID,ETL_PROC_WID
DB2 Fatal Error].
LKPDP_1:READER_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
LKPDP_1:READER_1_1> BLKR_16004 ERROR: Prepare failed.
WRITER_1_*_1> WRT_8333 Rolling back all the targets due to fatal session error.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [LKP_ETL_PROC_WID], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [EXPTRANS1], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [EXPTRANS1], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [SQTRANS], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [SQTRANS], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [SQTRANS], and the session is terminating.
TRANSF_1_1_1> DBG_21511 TE: Fatal Transformation Error.
WRITER_1_*_1> WRT_8325 Final rollback executed for the target [W_ORDER_PARTY] at end of load
WRITER_1_*_1> WRT_8035 Load complete time: Wed Sep 22 10:36:16 2010
In the above log W_PARAM_G table is a warehouse table. We have checked Informatica to find out the issue but there is no error in informatica.
Thanks in advance.
Deepak.

Hi Sandeep,
Yes but if you see the log ,its connecting to OLTP DB(DB2 for Siebel source DB),which it shouldnt
KPDP_1:READER_1_1> DBG_21438 Reader: Source is [SFAPROD1], user [siebel]
LKPDP_1:READER_1_1> CMN_1021 Database driver event...
*CMN_1021 [DB2 Event Using Array Inserts. connect string = [SFAPROD1]. userid = [siebel]]*
LKPDP_1:READER_1_1> BLKR_16003 Initialization completed successfully.
LKPDP_1:READER_1_1> BLKR_16007 Reader run started.
LKPDP_1:READER_1_1> RR_4049 SQL Query issued to database : (Wed Sep 22 10:36:17 2010)
LKPDP_1:READER_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
LKPDP_1:READER_1_1> RR_4035 SQL Error [
*[IBM][CLI Driver][DB2/AIX64] SQL0204N "SIEBEL.W_PARAM_G" is an undefined name. SQLSTATE=42704*
I Have check the mapplet ,its same no issues in that as well.
Regards,
Deepak.

Changing the dropdown values for one of the fields in CHECK STATUS query

Hi,
We are on SRM 7.1.
In the CHECK STATUS transaction,in the selection screen(QUERY),there is a field called "ROLE" which has teh dropdown values of "APPROVE BY ME","REJECTED BY ME" and "GOODS/SERVICES DELIVERED TO ME".Is there any way some of these drowpdown values can be removed?
Please advise.

hi nmsrm1234
i have a document for this issue.
but i don´t find this document in internet. it is called : CUSTOMER-SPECIFIC UI ADJUSTMENTS IN SRM 7.0 WEBDYNRPO ENVIROMENT / META DATA HANDLING CONCEPT.
if you can find it, you will get an idea to resolve this issue, if you will no have luck, please get me your mail, and i will send you the document.
regards.

My wireless keyboard is generating the wrong character for one of the keys. Any ideas how to fix?

My wire2ess key board is generating a 2 as you can see in the word wire2ess. Any idea how to fix?

Make sure that there is no entry in system prefs/language & text/text/symbol and text substitution which causes this.
Try another keyboard.

Data load for target after target enhancement

Dear all,
We are using BI7.00 and in one of our design we have the data first loaded to the ODS and then to the Cube. Now we wanted to get the value of one more field. This field is already avaialable in the data source and data is flowing upto PSA. I have added that field in the ODS. My problem starts here. I want the data to flow for all the previous requests i.e., earlier requests in the ODS and the Cube (Prior to enhancement) without disturbing the data load.
Kindly provide the step by step instructions. I do not want the earlier data to be deleted. The current field value to be updated to the previous loads to the ODS and the Cube.
Regards,
M.M

Hi,
Overwrite optrion is available in the update mode of key figures.
Its key figure which determines whether the DSO is in overwrite or addition mode.
Go to the mappings of each infoobject in the tranformation from the data source to DSO and check the mapping type of each key figure and then see if its overwrite or not??
To avoide reloading to the cube.....One of the option is to add the fields in both cubes and DSO and then activate the transformation and mappings,DTP ect.
After that load the data to the DSO and then schedule the delta from the DSO to the cube.Thi will bring all the chnages to the DSO in the cube.
But this delta may be a huge one and may fail depending upon the data in the DSO.
But you can try for this and if it is not working then you may have to delete the cube and reload it.
Thanks
Ajeet

Changing date format for some of the date columns in a subject area

Hi,
I have a requirement to change the date format for some of the date columns to dd-mon-yyy for only a particular subject area. Is there a feature available in the RPD which can help me do this?
In Answers - Column Properties for a Particular column of a report, we can save the style and formatting as system wide default for the particular column or the data type, but that applies across subject areas.
I tried with the config files too , but that too applies to all suject areas.
Thanks in Advance,
Gaurav

Why don't you create 2 logical column derived from same date physical col and then change the format for one logical column and use it in Subject Area ?

I want to delete the data content for InfoObject in processchain

Hi Guys,
We have requirement to delete the data content for one InfoObject in processchain(daily) .Could you please tell me is there any function module or abap program or any other alternative to do this and which can be added to processchain.
Thanks
Prasanna

fm RSDMD_DEL_MASTER_DATA
REPORT Z_DEL_MASTER.
tables : RSDIOBJ.
select-options:
s_iobj for RSDIOBJ-IOBJNM.
start-of-selection.
loop at s_iobj.
call function 'RSDMD_DEL_MASTER_DATA'
exporting
I_IOBJNM = s_iobj-low
I_FLG_DELETE_ALL = 'X'
I_FLG_DELETE_SIDS = 'X'
I_FLG_DELETE_SIDS_ASK
I_FLG_DELETE_TEXTS = 'X'
I_T_CHAVL =
I_FLG_DIALOG = ''
I_FLG_FORCE_DELETE = 'X'.
I_FLG_SIMULATION = ''
I_WITHOUT_PROTOCOL = ''
endloop.
Re: Deleting Master data
Cleanup of Master Data
Re: Functionmodule RSDMD_DEL_MASTER_DATA

TS3510 I have 3 different apple devices using the same Apple ID and would like to use FaceTime to call from one device to the other. Do I need a different Apple ID for one of the devices in order to do that?

I have 3 different apple devices (iPod Touch, iPad and MacBook Pro) using the same Apple ID and would like to use FaceTime to call from one device to the other. Do I need a different Apple ID for one of the devices in order to do that?

I found this on a related question in the Community:
Yes you can do it. I do it with 4 different devices all using the same Apple ID.
You need to associate different email addresses for each device in order to use those email addresses as the "contact at" email address. The reason the calls are dropping on you now is that what you are trying to do is like calling yourself on your own phone.
You can also create new iCloud accounts on each device simply to use for FaceTime, but I'm guessing that the users of the other two devices have their own email addresses which will make this work for you quite easily.
Take a look at this for more information.
The seems to go against what Gail said and the issue you raised about buying dup apps was my first concern. If this other post is correct, how to I set a different "contact at" in the iPod Touch?
Goose

I want to Facetime my Ipad from my Iphone but they are both set up with the same Apple id. Do I need to create a new id for one of them in order to facetime with the other?

I want to Facetime my Ipad from my Iphone but they are both set up with the same Apple id. Do I need to create a new id for one of them in order to facetime with the other?

You should be able to call the iPad using your Apple ID from the iPhone. When calling from iPad use the iPhone's phone number to initiate the call.

HT1386 After syncing with itunes(windows), messages for one of the contact(I have saved the contact name as 'Unknown') are lost. I can see only few messages which fits to the screen. I don't see option to load earlier messages.

After syncing with itunes(windows), messages for one of the contact(I have saved the contact name as 'Unknown') are lost. I can see only few messages which fits to the screen. I don't see option to load earlier messages.
Can anyone help.

Can anyone help on this?

Where is the data file for the address book located, I need to restore mine from backup but don't know where it is.

Where is the data file for the address book located, I need to restore mine from backup but don't know where it is to do so. Putting my Mac Pro onto icloud synching contacts resulted in duplicate and triplicates of the same cards. I have a few THOUSAND contacts and the last time this happened was on mobile me. that had a function where you could replace info on the mobile me server with info on the computer. I see no way to do that on the new cloud.

In the stupidly hidden user's Library->/Application Support/AddressBook/ labeled as AddressBook-v22.abcddb
For TM restores, see Pondini's TM FAQs for starters, since I don't use TM.

Hello I was charged twice for adobe story plus, I need this problem corrected and a refund issued for one of the subscription charges, I tried chatting with Adobe and they were unable to help me. Where is email support?

Hello I was charged twice for adobe story plus, I need this problem corrected and a refund issued for one of the subscription charges, I tried chatting with Adobe and they were unable to help me. Where is email support?

This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

If the data network is not available for some time, to get it again we need to restart the phone instead it is not finding the data network instantly. why cant the iphone searches data net work offten if not available. i am totally disappointed with this!

If the data network is not available for some time, to get it again we need to restart the phone instead it is not finding the data network instantly. why cant the iphone searches data net work offten if not available. i am totally disappointed with this!

Still it could not find the data network.it searches for voice network instantly and works too. but even full voice network available, there is no data network.when i restart the phone it could find data network.
Already i reset network settings for two times.

Need to skip the data load for one of the sub chain.

Similar Messages

Maybe you are looking for