Delete the data that is Loaded using BDC

Hi All,
We had loaded the data in SAP using BDC-Session Unfortunately.
Now we want to delete all the  data which is loaded usong these sessions.
Please can anyone know the procedure to do so.(May be using LSMW)
It would be really great help.
Thank you,
Moderator message - Moved to the correct forum
Edited by: Rob Burbank on Sep 16, 2009 3:31 PM

can you tell me how you deleted the data using LSMW?  I'm trying to use LSMW to delete contents of telephone and fax fields in Vendor Master, using batch recording. I've tried it two ways; loading "blank" phone/fax values from text file, and just setting a a rule of constant (of null) for the telephone/fax field in the mapping step and leaving it out of the upload file. The import and convert steps look fine and display the fields as blank but the field contents are not cleared after I run batch. I used these same objects to load phone number values to these fields with no problem so I know there are no errors in mapping, etc. Is there a trick to deleting fields using LSMW processing steps to clear fields in vendor master?

Similar Messages

  • How to revert the data that is loaded using BDC for transaction PA30

    Hi All,
    We had loaded the data in SAP using BDC-Session Unfortunately.
    Now we want to delete all the data which is loaded usong these sessions.
    Please can anyone know the procedure to do so.(May be using LSMW)
    This is the test environment.
    This is the HR Data.
    Transaction we used is PA30.
    Thank you,
    Edited by: Kumar B on Sep 16, 2009 6:55 PM

    Sorry All for the late response.
    Thanks Swathi ..I thought in same manner.
    But we used the LSMW,It deleted the records in the exact fashion we need.
    It was a nice experience.
    Use T-code SE38 run the report RPUDELPN and pass the pernr entire data will delete. as it is a test client then go to NUMKR Feature reset it and upload the correct data again.
    I think that would not have worked for us as it deletes all the employee records.
    Might be dangerous too
    If it is has standard fast entry screen then use pa70 for mass deletion
    Apart from deletion,Also we need to delimit the previous record.
    Thank you All

  • How to delete the data in a table using function

    hi all,
    i need to delete the data in a table using four parameters in a function,
    the parameters are passed through shell script.
    How to write the function
    Thanks

    >
    But the only thing is that such function cannot be used in SQL.
    >
    Perhaps you weren't including the use of autonomous transactions?
    CREATE OR REPLACE FUNCTION remove_emp (employee_id NUMBER) RETURN NUMBER AS
    PRAGMA AUTONOMOUS_TRANSACTION;
    tot_emps NUMBER;
    BEGIN
    SELECT COUNT(*) INTO TOT_EMPS FROM EMP3;
    DELETE FROM emp3
    WHERE empno = employee_id;
    COMMIT;
    tot_emps := tot_emps - 1;
    RETURN TOT_EMPS;
    END;
    SQL> SELECT REMOVE_EMP(7499) FROM DUAL;
    REMOVE_EMP(7499)
                  12
    SQL> SELECT REMOVE_EMP(7521) FROM DUAL;
    REMOVE_EMP(7521)
                  11
    SQL> SELECT REMOVE_EMP(7566) FROM DUAL;
    REMOVE_EMP(7566)
                  10
    SQL>

  • How to delete the data from KNVP without using the delete statement

    Hello friends,
    I have a requirement that I have to delete the data from KNVP table without using any delete statement. For it I have to use the Standard BAPI or any standard program.
    Can you please tell me the name of the standard program or BAPI to delete the data .
    Thanks in Advance
    Kuldeep

    Hello Raymond,
    I have use the function 'CUSTOMER_UPDATE' in which I only gives the data in T_XKNVP table only but still the data is not get deleting. Please see the code below.
    =============================================================
    REPORT  ZK_TEST2                                .
    data :
        I_KNA1     LIKE     KNA1,
        I_KNB1     LIKE     KNB1,
        I_KNVV     LIKE     KNVV,
        I_YKNA1     LIKE     KNA1,
        I_YKNB1     LIKE     KNB1.
    Data :
    T_XKNAS       LIKE     FKNAS occurs 0,
    T_XKNB5     LIKE     FKNB5 occurs 0,
    T_XKNBK     LIKE     FKNBK occurs 0,
    T_XKNVA     LIKE     FKNVA occurs 0,
    T_XKNVD     LIKE     FKNVD occurs 0,
    T_XKNVI     LIKE     FKNVI occurs 0,
    T_XKNVK     LIKE     FKNVK occurs 0,
    T_XKNVL     LIKE     FKNVL occurs 0,
    T_XKNVP     LIKE     FKNVP occurs 0 with header line,
    T_XKNVS     LIKE     FKNVS occurs 0,
    T_XKNEX     LIKE     FKNEX occurs 0,
    T_XKNZA     LIKE     FKNZA occurs 0,
    T_YKNAS     LIKE     FKNAS occurs 0,
    T_YKNB5     LIKE     FKNB5 occurs 0,
    T_YKNBK     LIKE     FKNBK occurs 0,
    T_YKNVA     LIKE     FKNVA occurs 0,
    T_YKNVD     LIKE     FKNVD occurs 0,
    T_YKNVI     LIKE     FKNVI occurs 0,
    T_YKNVK     LIKE     FKNVK occurs 0,
    T_YKNVL     LIKE     FKNVL occurs 0,
    T_YKNVP     LIKE     FKNVP  occurs 0 with header line,
    T_YKNVS     LIKE     FKNVS occurs 0,
    T_YKNEX     LIKE     FKNEX occurs 0,
    T_YKNZA     LIKE     FKNZA occurs 0.
    T_XKNVP-KUNNR     =     '7000002648'     .
    *T_XKNVP-VKORG     =     '0001'     .
    *T_XKNVP-VTWEG     =     '01'     .
    *T_XKNVP-SPART     =     '01'     .
    T_XKNVP-KZ      =     'D'     .
    append T_XKNVP to T_XKNVP.
    CALL FUNCTION 'CUSTOMER_UPDATE'
      EXPORTING
        I_KNA1        = I_KNA1
        I_KNB1        = I_KNB1
        I_KNVV        = I_KNVV
        I_YKNA1       = I_YKNA1
        I_YKNB1       = I_YKNB1
      TABLES
        T_XKNAS       = T_XKNAS
        T_XKNB5       = T_XKNB5
        T_XKNBK       = T_XKNBK
        T_XKNVA       = T_XKNVA
        T_XKNVD       = T_XKNVD
        T_XKNVI       = T_XKNVI
        T_XKNVK       = T_XKNVK
        T_XKNVL       = T_XKNVL
        T_XKNVP       = T_XKNVP
        T_XKNVS       = T_XKNVS
        T_XKNEX       = T_XKNEX
        T_XKNZA       = T_XKNZA
        T_YKNAS       = T_YKNAS
        T_YKNB5       = T_YKNB5
        T_YKNBK       = T_YKNBK
        T_YKNVA       = T_YKNVA
        T_YKNVD       = T_YKNVD
        T_YKNVI       = T_YKNVI
        T_YKNVK       = T_YKNVK
        T_YKNVL       = T_YKNVL
        T_YKNVP       = T_YKNVP
        T_YKNVS       = T_YKNVS
        T_YKNEX       = T_YKNEX
        T_YKNZA       = T_YKNZA
    =============================================================

  • Deletting the file that has been used in 'Additional Files' in FILE SENDER

    Hi people.
    I've developed an interface that has to send a ZIP file to an email address.
    I pick that file using a dummy file. This file is picked as an attachment and has been defined in 'additional parameters' of SENDER FILE.
    My problem is that i want to delete that 'additional file' once it has been procesed. I think that this could be done running an operating system command.
    My problem is that i don't know how to do this in UNIX systems.
    Can anyone tell me how to delete (in UNIX) a file with name dummy.zip located in folder /usr/sap.../ ?
    Regards,
    Inigo

    You can probably do this by executing a shell script on the server!
    You can only run commands on the PI Server
    See here for details and help on writing shell scripts!
    http://www.injunea.demon.co.uk/pages/page205.htm

  • How to delete the data in the compressed  infocube

    hi, bi gurus
    we are facing a problem in inventory management the info cube in BW production
    normally every time inventory cube gets compressed that means the data will be moving to F fact table to E fact table
    now the problem is we are having some bad data for latest five requests in this cube as we all know compressed data
    can't be delete by deleting request in the request tab the only way is go for selective deletion but i don't find any selective
    option in the cube we are PSA data for that five request which having correctdata please help how to delete the bad data in the
    info cube and load the correct data which we are having in PSA
    Thanks
    Joe

    Hi André
    Thanks you for ur answer
    what i am telling is their is an option for selective deletion for inventory cube
    but i don't find any specific option to delete the data that means like calendar day like that
    i hope you got my question.
    hi Saveen Kumar,
    Thank you again
    we are using 3.xx flow if we do the request reverse posting for all the 5 requests which has updated incorrect data
    next we need to do compression also or not
    and how to reload the data from PSA to Infocube becuse if request still avaliable in info cube it will not allow me to do that
    can you please tell me detail how to proceed in step by step this is first time i am doing request reverse post and i have to do it production please tell me
    Thanks in adavance
    Thanks,joe

  • How to delete the data loaded into MySQL target table using Scripts

    Hi Experts
    I created a Job with a validation transformation. If the Validation was failed the data passed the validation will be loaded into Pass table and the data failed will be loaded into failed table.
    My requirement was if the data was loaded into Failed database table then i have to delete the data loaded into the Passed table using Script.
    But in the script i have written the code as
    sql('database','delete from <tablename>');
    but as it is an SQL Query execution it is rising exception for the query.
    How can i delete the data loaded into MySQL Target table using scripts.
    Please guide me for this error
    Thanks in Advance
    PrasannaKumar

    Hi Dirk Venken
    I got the Solution, the mistake i did was the query is not correct regarding MySQL.
    sql('MySQL', 'truncate world.customer_salesfact_details')
    error query
    sql('MySQL', 'delete table world.customer_salesfact_details')
    Thanks for your concern
    PrasannaKumar

  • I somehow erased everything (all important dates) off my ical on my mac and I'm afraid that if I connect my iphone that it will do the same there.  Will my iphone sync the dates that are on the phone and add them to the ical?  Or will it delete everything

    I somehow erased everything (all important dates) off my ical on my mac and I'm afraid that if I connect my iphone that it will do the same there.  Will my iphone sync the dates that are on the phone and add them to the ical?  Or will it delete everything

    Contacts are designed to be synced to a supported application on the computer or a cloud service.
    Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
    If you have failed to use the device as designed it may be too late to recovery anything.
    Is the device regularly backed up to a computer via iTunes?  If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created.

  • Hallo My system runs slow. how can i reorganize the date, that the pc runs faster? In the window world i hade to delete some fils. how it work in the apple world?

    Hallo My system runs slow. how can i reorganize the date, that the pc runs faster? In the window world i hade to delete some fils. how it work in the apple world?

    See these:
    Switching from Windows to Mac OS X,
    Basic Tutorials on using a Mac,
    Mac OS X keyboard shortcuts,
    Anatomy of a Mac,
    MacTips,
    Switching to Mac Superguide, and
    Switching to the Mac: The Missing Manual, Mountain Lion Edition.
    Additionally, *Texas Mac Man* recommends:
    Quick Assist,
    Welcome to the Switch To A Mac Guides,
    Take Control E-books, and
    A guide for switching to a Mac.
    Once you get familiar with the Mac, see:
    Mac Maintenance Quick Assist,
    Mac OS X speed FAQ,
    Speeding up Macs,
    How to Speed up Macs, ,
    Macintosh OS X Routine Maintenance,
    Essential Mac Maintenance: Get set up,
    Essential Mac Maintenance: Rev up your routines,
    Maintaining OS X, 
    Five Mac maintenance myths and
    Myths of required versus not required maintenance for Mac OS X for information.

  • Two apple I.D., one with the .me email address I want, how can I delete it so that I can use that .me address on my other account?

    I have two apple I.D., one with the .me email address I want, how can I delete it so that I can use that .me address on my other account
    Or is it possible to transfer the purchases (apps) to my new .me account so that I can re-download them in the future without having to switch accounts?

    crazyshark wrote:
    I have two apple I.D., one with the .me email address I want, how can I delete it so that I can use that .me address on my other account
    Or is it possible to transfer the purchases (apps) to my new .me account so that I can re-download them in the future without having to switch accounts?
    You can't do this, and you can't transfer purchases between accounts. There is no conflict about using one ID for iTunes, iTunes in the Cloud and iTunes Match (the ID you've been using for iTunes) and using the other ID for iCloud.

  • How to write a procedure to load the data into a table using xml file as input to the procedure?

    Hi,
    Iam new to the xml,
    can u please anyone help me how to write procedure to load the data into a table using xml as input parameter to a procedure and xml file is as shown below which is input to me.
    <?xml version="1.0"?>
    <DiseaseCodes>
    <Entity><dcode>0</dcode><ddesc>(I87)Other disorders of veins - postphlebitic syndrome</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
    <Entity><dcode>0</dcode><ddesc>(J04)Acute laryngitis and tracheitis</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
    <Entity><dcode>0</dcode><ddesc>(J17*)Pneumonia in other diseases - whooping cough</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
    </DiseaseCodes>.
    Regards,
    vikram.

    here is the your XML parse in 11g :
    select *
      from xmltable('//Entity' passing xmltype
    '<?xml version="1.0"?>
    <DiseaseCodes>
    <Entity><dcode>0</dcode><ddesc>(I87)Other disorders of veins - postphlebitic syndrome</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
    <Entity><dcode>0</dcode><ddesc>(J04)Acute laryngitis and tracheitis</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
    <Entity><dcode>0</dcode><ddesc>(J17*)Pneumonia in other diseases - whooping cough</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
    </DiseaseCodes>
    ') columns
      "dcode" varchar2(4000) path '/Entity/dcode',
      "ddesc" varchar2(4000) path '/Entity/ddesc',
      "reauthflag" varchar2(4000) path '/Entity/reauthflag'
    dcode                                                                            ddesc                                                                            reauthflag
    0                                                                                (I87)Other disorders of veins - postphlebitic syndrome                           0
    0                                                                                (J04)Acute laryngitis and tracheitis                                             0
    0                                                                                (J17*)Pneumonia in other diseases - whooping cough                               0
    SQL>
    Using this parser you can create procedure as
    SQL> create or replace procedure myXMLParse(x clob) as
      2  begin
      3    insert into MyXmlTable
      4      select *
      5        from xmltable('//Entity' passing xmltype(x) columns "dcode"
      6                      varchar2(4000) path '/Entity/dcode',
      7                      "ddesc" varchar2(4000) path '/Entity/ddesc',
      8                      "reauthflag" varchar2(4000) path '/Entity/reauthflag');
      9    commit;
    10  end;
    11 
    12  /
    Procedure created
    SQL>
    SQL>
    SQL> exec myXMLParse('<?xml version="1.0"?><DiseaseCodes><Entity><dcode>0</dcode><ddesc>(I87)Other disorders of veins - postphlebitic syndrome</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity><Entity><dcode>0</dcode><ddesc>(J04)Acute laryngitis and tracheitis</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity><Entity><dcode>0</dcode><ddesc>(J17*)Pneumonia in other diseases - whooping cough</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity></DiseaseCodes>');
    PL/SQL procedure successfully completed
    SQL> select * from MYXMLTABLE;
    dcode                                                                            ddesc                                                                            reauthflag
    0                                                                                (I87)Other disorders of veins - postphlebitic syndrome                           0
    0                                                                                (J04)Acute laryngitis and tracheitis                                             0
    0                                                                                (J17*)Pneumonia in other diseases - whooping cough                               0
    SQL>
    SQL>
    Ramin Hashimzade

  • I would like to know how i can create a bell graph with out using sub VIs, the data that i created consists in 500 readings with values of 0 to 100, i calculated the mean value and standard diviation. I hope some one can help me

    I would like to know how i can create a bell graph with out using sub VIs, the data that i created consists in 500 readings with values of 0 to 100, i calculated the mean value and standard diviation. I hope some one can help me

    Here's a quick example I threw together that generates a sort-of-bell-curve shaped data distribution, then performs the binning and plotting.
    -Kevin P.
    Message Edited by Kevin Price on 12-01-2006 02:42 PM
    Attachments:
    Binning example.vi ‏51 KB
    Binning example.png ‏12 KB

  • I want to build an array using the data that I get through the serial port

    I am reading data through the serial port, but I want to buffer these data. I have seen a function, but i think that i can use this if I am reading data from I/O intrument, so I don´t how can I fill an array, with the data that I am reading!!!
    Thank you!!!

    I'll hazard a guess that you are reading data with VISA as a string. Then you want to convert that (probably with Scan From String) into a number. Then, you want to collect those numbers into an array.
    We don't really have enough information to tell you the best way to do this. Here are some ideas.
    If you are reading all the numbers from the instrument at once (e.g., a waveform from a scope), you might consider using "Spreadsheet string to array". Most scopes return the data as ASCII with commas between the values, so you'd wire a "," to the "delimiter" input of the "Spreadsheet string to array" function.
    If, however, the instrument is returning a single point at a time, there are more questions. Do you want to do this continuously, or do you want t
    o collect only a certain number of data points, and then process them as a block?
    If the latter, then you'd just acquire each data point, convert it to a number, and then use output indexing on the for loop to create your array.
    If the former, then you may want to store the data in a queue, and read it from the queue elsewhere in your program.
    If you let us know what you want to do, we can probably provide more precise help.
    Brian

  • How to use the data that we got after successful execution of a Bapi

    I have created a simple Webdynpro application to execute a user defined Bapi and that was executing successfully but the next step when i want to use the data that which i have retrieved from that Bapi i am facing problem.I am unable to use that particular data
    My idea is to use that data and again i want to filter that particular data which i got from the Bapi execution with out calling another Bapi
    Ex: I wrote a user defined Bapi to retrieve flight details if i enter the id of the particular airline
    Then i executed my webdynpro application and i am able to get the output
    from that output i want a particular flight details if i choose the City name i.e. the details related to that particular city which i choose

    Hi Praveen,
    Thanks for the Help,
    I am working with the same scenario which was there in the PDF sent by you but in that document it was directly allowing us to click on the output which we got after executing a Bapi, but here when i am executing i didn't know the procedure how to make use of the data which we got after execution and displaying it in other view
    can we write any code to access that particular data that we got after executing that flight scenario and do some operations on that particular fields
    thanks and regards
    Raghu

  • Using Numbers, can I calculate the date that will be eg 45 days ahead of a given date?

    Using Numbers, can I calculate the date that will be eg 45 days ahead of a given date?

    MWB,
    Certainly. Let's say that your given date is in B2. The date 45 days earlier can be found with:
    =B2 – 45.
    Almost seems too simple.
    Jerry

Maybe you are looking for