How to revert the data that is loaded using BDC for transaction PA30

Hi All,
We had loaded the data in SAP using BDC-Session Unfortunately.
Now we want to delete all the data which is loaded usong these sessions.
Please can anyone know the procedure to do so.(May be using LSMW)
This is the test environment.
This is the HR Data.
Transaction we used is PA30.
Thank you,
Edited by: Kumar B on Sep 16, 2009 6:55 PM

Sorry All for the late response.
Thanks Swathi ..I thought in same manner.
But we used the LSMW,It deleted the records in the exact fashion we need.
It was a nice experience.
Use T-code SE38 run the report RPUDELPN and pass the pernr entire data will delete. as it is a test client then go to NUMKR Feature reset it and upload the correct data again.
I think that would not have worked for us as it deletes all the employee records.
Might be dangerous too
If it is has standard fast entry screen then use pa70 for mass deletion
Apart from deletion,Also we need to delimit the previous record.
Thank you All

Similar Messages

Delete the data that is Loaded using BDC

Hi All,
We had loaded the data in SAP using BDC-Session Unfortunately.
Now we want to delete all the data which is loaded usong these sessions.
Please can anyone know the procedure to do so.(May be using LSMW)
It would be really great help.
Thank you,
Moderator message - Moved to the correct forum
Edited by: Rob Burbank on Sep 16, 2009 3:31 PM

can you tell me how you deleted the data using LSMW? I'm trying to use LSMW to delete contents of telephone and fax fields in Vendor Master, using batch recording. I've tried it two ways; loading "blank" phone/fax values from text file, and just setting a a rule of constant (of null) for the telephone/fax field in the mapping step and leaving it out of the upload file. The import and convert steps look fine and display the fields as blank but the field contents are not cleared after I run batch. I used these same objects to load phone number values to these fields with no problem so I know there are no errors in mapping, etc. Is there a trick to deleting fields using LSMW processing steps to clear fields in vendor master?

How to save the data to sap abap using Adobe Flex

Hi Everybody......
I am new to Adobe flex with sap abap.
 How to save the data in sap abap using Adobe Flex coding is Action Script and using RFC web service.
Please give me any suggisions on that.
Thank you
Venkatesh V

Hi Venkatesh,
Try with folowing coding...
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute"
 initialize="initApp()">
 <mx:Label x="10" y="23" text="Airline" width="90" id="lblAirline"/>
 <mx:TextInput x="108" y="21" id="txtAirline"/>
 <mx:Button x="10" y="49" label="Get Data" id="btnGetData" enabled="false" click="getData()"/>
 <mx:DataGrid x="10" y="97" id="dgFlightData" dataProvider="">
 </mx:DataGrid>
 <mx:Script>
 <![CDATA[
 import mx.collections.ArrayCollection;
 import mx.rpc.AbstractOperation;
 import mx.rpc.events.FaultEvent;
 import mx.rpc.soap.LoadEvent;
 import mx.rpc.events.ResultEvent;
 import mx.rpc.soap.WebService;
 [Bindable] public var flightData:ArrayCollection;
 private var flightWS:WebService;
 private function initApp():void{
 flightWS = new WebService();
 flightWS.wsdl = "http://uscib20.wdf.sap.corp:50021/sap/bc/soap/wsdl11?services=ZGTEST&sap-client=000";
 flightWS.addEventListener(FaultEvent.FAULT,onWSError);
 flightWS.addEventListener(LoadEvent.LOAD,onWSDLLoaded);
 flightWS.addEventListener(ResultEvent.RESULT,onFlightWSGotResult);
 flightWS.loadWSDL();
private function getData():void{
 var operation:AbstractOperation = flightWS.getOperation("ZGTEST");
 var input:Object = new Object();
 input.Airline = txtAirline.text.toUpperCase();
 operation.arguments = input;
 operation.send();
 private function onWSError (event:FaultEvent):void{
 private function onWSDLLoaded(event:LoadEvent):void{
 btnGetData.enabled = true;
 private function onFlightWSGotResult(event:ResultEvent):void{
 flightData = event.result.SFLIGHT;
 ]]>
 </mx:Script>
</mx:Application>
Regards,
Vinoth

How to update the data in sqlserver table using procedure in biztalkserver

Hi,
Please can any one answer this below question
how to update the data in sqlserver table using procedure in biztalkserver
while am using executescalar,typedprocedure getting some warning
Warning:The adapter failed to transmit message going to send port "SendtoSql1" with URL "mssql://nal126//MU_Stage2?". It will be retransmitted after the retry interval specified for this Send Port. Details
Please send me asap....
Thanks...

Hi Messip,
A detailed error would have helped us to answer you more appropriately but
You can follow the post which has step by step instructions, to understand how to use Stored Procedure:
http://tech-findings.blogspot.in/2013/07/insert-records-in-sql-server-using-wcf.html
Maheshkumar
S Tiwari|User
Page|Blog|BizTalk
2013: Inserting RawXML (Whole Incoming XML Message) in SQL database

How to capture the data that the user modified in SM30(Maintenance view)

Hello experts,
I have a new requirement wherein when the user modifies a particular record in SM30(maintenance view)
it would also update that certain records in another table. For example, I modified the address
of record 1 in table1 so I need to automatically update that same record in table2. Help would be greatly appreciated.
Again, thank you guys and have a nice day!

Hi again,
1. But how can I capture the data that was modified
Yes, u are right.
We will have to use the event,
'BEFORE SAVING'.
2. In that,
u must fire a select query,
   from the same table,
   for the same record.
3. In this, u will get the OLD DATA (which was already saved),
4. Using this,u can compare,
   (either thru LOOP, or field by field)
to know, which field value has been changed.
regards,
amit m.

How to delete the data in a table using function

hi all,
i need to delete the data in a table using four parameters in a function,
the parameters are passed through shell script.
How to write the function
Thanks

>
But the only thing is that such function cannot be used in SQL.
>
Perhaps you weren't including the use of autonomous transactions?
CREATE OR REPLACE FUNCTION remove_emp (employee_id NUMBER) RETURN NUMBER AS
PRAGMA AUTONOMOUS_TRANSACTION;
tot_emps NUMBER;
BEGIN
SELECT COUNT(*) INTO TOT_EMPS FROM EMP3;
DELETE FROM emp3
WHERE empno = employee_id;
COMMIT;
tot_emps := tot_emps - 1;
RETURN TOT_EMPS;
END;
SQL> SELECT REMOVE_EMP(7499) FROM DUAL;
REMOVE_EMP(7499)
              12
SQL> SELECT REMOVE_EMP(7521) FROM DUAL;
REMOVE_EMP(7521)
              11
SQL> SELECT REMOVE_EMP(7566) FROM DUAL;
REMOVE_EMP(7566)
              10
SQL>

How to change the date and time during OVM installation for Fusion Apps

Hi,
The customer is using Fusion Instance which is a V1 (Build 19) OVM installation shipped by Oracle with Demo Data (including seeded user IDs and roles) in it.
Now they have issue with Date format for the application on the screens is showing MM/DD/YYYY where as it should be (Singapore) Standard is DD/MM/YYYY.
Q/A: How to change the date/time in OVM image
Refer SR : 3-5640792461
Regards
Ganesh Ananthapadmanaban

Not a problem. There are a number of other system and network setup commands that you might find useful at some time. From within the Remote Desktop Admin in the Send Unix Command window type:
networksetup -help
systemsetup -help
That will give you lists of the commands, including the one I posted above, with their basic syntax. They're handy to know.
Cheers.

How to Swap the Data between 2 characteristics using FOX Code

Dear All,
We have a requirement to swap the data between 2 characteristics. I tried to get the data from one characteristics using BPS variable VARV() and another characteristic need to get from craters data. But using OBJV() function it is not working for that.
If i try to swap the data between characteristics directly, they are not allowing. It says Type is not same, though it is same type as per properties wise.
Could anybody let me know is it possible to change the characteristics data between characteristics by moving between each other in FOX Formulas. General case it is possible to change the data between same chars.
Thanking you in advance.
Kind Regards,
Ram.
Edited by: Ram

Found the answer
⌘` the key above the tab.

How to display the output screen when I use bdc.

hey expert,
I want to display the output screen when i use bdc without using mode 'A'.
thank you.

Hi,
You can go for mode 'E'.. it will display the output screen directly and if there is any error in the transaction you would get that particular screen and you can correct and continue after which you will get the final screen if anything goes fine...
check this sample code....
I had a program if you execute below program it automatically creates a new zprogram.
REPORT zprogram_create_recording.
PARAMETER:
p_prog    TYPE sy-repid OBLIGATORY,
p_shtxt TYPE repti OBLIGATORY,
p_pack TYPE devclass DEFAULT '$tmp'.
DATA:
t_bdcdata LIKE
   STANDARD TABLE
         OF bdcdata.
DATA:
wa_bdcdata LIKE LINE OF t_bdcdata.
REFRESH t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLWBABAP'.
wa_bdcdata-dynpro     = '0100'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'RS38M-PROGRAMM'.
wa_bdcdata-fval       = p_prog.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'NEW'.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLSEDTATTR'.
wa_bdcdata-dynpro     = '0200'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'RS38M-REPTI'.
wa_bdcdata-fval       = p_shtxt.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'TRDIR-SUBC'.
wa_bdcdata-fval       = '1'.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'CONT'.
APPEND wa_bdcdata TO t_bdcdata.
IF p_pack EQ '$TMP'.
*local object
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLSTRD'.
wa_bdcdata-dynpro     = '0100'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'KO007-L_DEVCLASS'.
wa_bdcdata-fval       = ' '.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'TEMP'.
APPEND wa_bdcdata TO t_bdcdata.
ELSE.
*package assignment with request
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLSTRD'.
wa_bdcdata-dynpro     = '0100'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'KO007-L_DEVCLASS'.
wa_bdcdata-fval       = p_pack.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'ADD'.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLSTRD'.
wa_bdcdata-dynpro     = '0300'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'KO008-TRKORR'.
wa_bdcdata-fval       = ' '.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'KO008-AS4TEXT'.
wa_bdcdata-fval       = ' '.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'LOCK'.
APPEND wa_bdcdata TO t_bdcdata.
ENDIF.                                 " IF P_PACK EQ '$TMP'
CALL TRANSACTION 'SE38' USING t_bdcdata MODE 'E'.
Hope this would help you..
Regards
Narin Nandivada

Flat file to upload data using BDC for transaction MM01

Hi
I am trying to update data using bdc code has been attached below using a txt file.
It is updating the first set of data into the table mara ,but for the rest it is not
All the data from txt file has being loaded to internal table , but the problem is it does not gets updated from internal table to the database .
Only the first set of data has been loaded , rest of the data is not loaded
content of txt file
zsc zsc kg
zsv zsv kg
zsb zsb kg
Actual code
report ZMAT_UPLOAD
 no standard page heading line-size 255.
types declaration..........................................................................
types : begin of t_mat,
 matnr(20),
 desc(50),
 uom(5),
end of t_mat.
internal table and workarea declaration.......................................
data : i_mat type table of t_mat.
data : wa_mat type t_mat.
include bdcrecx1.
start-of-selection.
moving the flat file content to internal table................................
CALL FUNCTION 'UPLOAD'
 EXPORTING
 FILETYPE = 'DAT'
 TABLES
 data_tab = i_mat.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
perform open_group.
loop at i_mat into wa_mat.
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
 'RMMG1-MATNR'.
perform bdc_field using 'BDC_OKCODE'
 '=AUSW'.
perform bdc_field using 'RMMG1-MATNR'
 wa_mat-matnr.
perform bdc_field using 'RMMG1-MBRSH'
 'P'.
perform bdc_field using 'RMMG1-MTART'
 'ZOH'.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
 'MSICHTAUSW-DYTXT(01)'.
perform bdc_field using 'BDC_OKCODE'
 '=ENTR'.
perform bdc_field using 'MSICHTAUSW-KZSEL(01)'
 'X'.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
 '=BU'.
perform bdc_field using 'MAKT-MAKTX'
 wa_mat-desc.
perform bdc_field using 'BDC_CURSOR'
 'MARA-MEINS'.
perform bdc_field using 'MARA-MEINS'
 wa_mat-uom.
perform bdc_field using 'MARA-MTPOS_MARA'
 'NORM'.
perform bdc_transaction using 'MM01'.
endloop.
Perform close_group.

Hi Sumant,
just concentrate on bold one
report ZMAT_UPLOAD
no standard page heading line-size 255.
types declaration..........................................................................

data : begin of t_mat occurs 0,
matnr(20),
desc(50),
uom(5),
end of t_mat.
internal table and workarea declaration.......................................
*data : i_mat type table of t_mat.
*data : wa_mat type t_mat.
include bdcrecx1.
start-of-selection.
moving the flat file content to internal table................................
CALL FUNCTION 'UPLOAD'
EXPORTING
FILETYPE = 'DAT'
TABLES
data_tab = i_mat.---> t_mat.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
perform open_group.
loop at i_mat into wa_mat.------>loop at t_mat.
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_field using 'BDC_OKCODE'
'=AUSW'.
perform bdc_field using 'RMMG1-MATNR'
wa_mat-matnr.---->t_mat-matnr(change in this for ur wa to t_mat.
perform bdc_field using 'RMMG1-MBRSH'
'P'.
perform bdc_field using 'RMMG1-MTART'
'ZOH'.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'MSICHTAUSW-KZSEL(01)'
'X'.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
'=BU'.
perform bdc_field using 'MAKT-MAKTX'
wa_mat-desc.
perform bdc_field using 'BDC_CURSOR'
'MARA-MEINS'.
perform bdc_field using 'MARA-MEINS'
wa_mat-uom.
perform bdc_field using 'MARA-MTPOS_MARA'
'NORM'.
perform bdc_transaction using 'MM01'.
endloop.
Perform close_group.
Reward points for helpful answers.
Thanks
Naveen khan
Message was edited by:
 Pattan Naveen
Message was edited by:
 Pattan Naveen

How to save the data that a user has written in a table (front panel) by using a "press button"?

Hi,
I have the following situation. I need to be able to save the data I write in a table (front panel) when desired.
This allows me to modify, add new data, etc in the "Table" when wanted and to SAVE the latest information when wanted.
I need to save all the table data by using ONLY one button.
Thanks for the help!
Kind regards,
Amaloa S.

Hi,
Thanks for the feedback. :-)
Your answered helped.
In this case I need to save the Data into an ARRAY.
Now I have the following issue. I will try to explain:
Suppose that I have following:
1. Several GROUPS of Data like this:
    ER-1234
    ER-3245
    ER-4786
    ER-9080
2. Each GROUP has the following ELEMENTS:
    A, Bi, Pb, Sn, Sn, Cr, Ni, Ca, ...., Al
   So it would be like
    ER-1234: A, Bi, Pb, Sn, Sn, Cr, Ni, Ca, ...., Al
    ER-3245: A, Bi, Pb, Sn, Sn, Cr, Ni, Ca, ...., Al
    ER-4786: A, Bi, Pb, Sn, Sn, Cr, Ni, Ca, ...., Al
    ER-9080: A, Bi, Pb, Sn, Sn, Cr, Ni, Ca, ...., Al
3. An each ELEMENT has DATA that I need to save, BUT! that I need to be able to get by specifying the group and the element.
    A:
        2,3   2,4    2, 8,   2,8
         2,2   2,3    2, 7,   2,6
         2,1   2,6    2, 6,   2,7
         2,5   2,4    2, 5,   2,3
How can I save the ELEMENT "A" Data with the label of the GROUP and the ELEMENT so that I can recongnize it when I need to get the DATA again?
Thanks for the help!
Best regards,
Amaloa.

How to store the data read from excel using java code in Ms access database

Hi. I wrote a code to read the data from excel. May i know how can i save it to Ms access database using java. Also i have many excels. So i should not connect the database using DSN. So is there any other way to achieve this?

kramish wrote:
Im pretty sure that Access does support JDBCNo it does not. It supports ODBC.
just doing a quick Google came up with some pages:
http://blog.taragana.com/index.php/archive/access-microsoft-access-database-from-java-using-jdbc-odbc-bridge-sample-code/
http://www.javaworld.com/javaworld/javaqa/2000-09/03-qa-0922-access.html
Both articles explains how to use the jdbc-odbc bridge. I think I've seen a pure jdbc driver for access but it wasn't from Microsoft and it wasn't free.
Kaj

How to change the data in a chart using slider bar ?

hi community,
i have issue, i created one SDK extension slider bar based on that i want to change the data in chart.
my requirement is like, i have month and some measures in a chart i want to set month in a slider bar if am moving slider according to that values should be change in chart.

You could try the following.
Pull the month dimension values into an object, where each dimension value is assigned to a "numeric" (air quotes, actually a string) attribute.
Something along the lines of:
var myMonths = new Object();
myMonths["0"] = <month0_key>;
myMonths["1"] = <month1_key>;
Then, you assign the range slider a set of numeric values, from 0 to n, where n is the last attribute in myMonths. When the user changes the slider values and the OnChange is fired, use the numeric values of the current slider positions to get the appropriate range filter values out of myMonths.
I've not tried this yet, so I don't yet know what pitfalls you'd run into.
Cheers,
Dave

How to read the data of a file using upload option....

Hi Frndz..
As per my requirment , i need to provide a upload UI to the user , so he can select file to be upload whenever user select the file n clicks on upload button i need to read the data of that fiel that user selects.
I have a solutions for this in JSP/JAVA , but i was unable to handle this in web dynpro..c this link in jsp ..
http://www.roseindia.net/jsp/fileupload.shtml
Thanks in Advance..
Regards
Rajesh

Hi,
Create a Value attribute (resource) of type Resource, bind it with the property of File Upload UI element.
On action place the code and Deploy the application
byte[] bytes = new byte[ 1024];
FileOutputStream out = new FileOutputStream( new File( <path in server>));
InputStream in = resource.read( true);
int len;
while( ( len = in.read( bytes)) > 0)
out.write( bytes, 0, len);
in.close();
out.close();
Regards
Vinod V

How to delete the data from KNVP without using the delete statement

Hello friends,
I have a requirement that I have to delete the data from KNVP table without using any delete statement. For it I have to use the Standard BAPI or any standard program.
Can you please tell me the name of the standard program or BAPI to delete the data .
Thanks in Advance
Kuldeep

Hello Raymond,
I have use the function 'CUSTOMER_UPDATE' in which I only gives the data in T_XKNVP table only but still the data is not get deleting. Please see the code below.
=============================================================
REPORT ZK_TEST2                                .
data :
    I_KNA1     LIKE     KNA1,
    I_KNB1     LIKE     KNB1,
    I_KNVV     LIKE     KNVV,
    I_YKNA1     LIKE     KNA1,
    I_YKNB1     LIKE     KNB1.
Data :
T_XKNAS       LIKE     FKNAS occurs 0,
T_XKNB5     LIKE     FKNB5 occurs 0,
T_XKNBK     LIKE     FKNBK occurs 0,
T_XKNVA     LIKE     FKNVA occurs 0,
T_XKNVD     LIKE     FKNVD occurs 0,
T_XKNVI     LIKE     FKNVI occurs 0,
T_XKNVK     LIKE     FKNVK occurs 0,
T_XKNVL     LIKE     FKNVL occurs 0,
T_XKNVP     LIKE     FKNVP occurs 0 with header line,
T_XKNVS     LIKE     FKNVS occurs 0,
T_XKNEX     LIKE     FKNEX occurs 0,
T_XKNZA     LIKE     FKNZA occurs 0,
T_YKNAS     LIKE     FKNAS occurs 0,
T_YKNB5     LIKE     FKNB5 occurs 0,
T_YKNBK     LIKE     FKNBK occurs 0,
T_YKNVA     LIKE     FKNVA occurs 0,
T_YKNVD     LIKE     FKNVD occurs 0,
T_YKNVI     LIKE     FKNVI occurs 0,
T_YKNVK     LIKE     FKNVK occurs 0,
T_YKNVL     LIKE     FKNVL occurs 0,
T_YKNVP     LIKE     FKNVP occurs 0 with header line,
T_YKNVS     LIKE     FKNVS occurs 0,
T_YKNEX     LIKE     FKNEX occurs 0,
T_YKNZA     LIKE     FKNZA occurs 0.
T_XKNVP-KUNNR     =     '7000002648'     .
*T_XKNVP-VKORG     =     '0001'     .
*T_XKNVP-VTWEG     =     '01'     .
*T_XKNVP-SPART     =     '01'     .
T_XKNVP-KZ      =     'D'     .
append T_XKNVP to T_XKNVP.
CALL FUNCTION 'CUSTOMER_UPDATE'
EXPORTING
    I_KNA1        = I_KNA1
    I_KNB1        = I_KNB1
    I_KNVV        = I_KNVV
    I_YKNA1       = I_YKNA1
    I_YKNB1       = I_YKNB1
TABLES
    T_XKNAS       = T_XKNAS
    T_XKNB5       = T_XKNB5
    T_XKNBK       = T_XKNBK
    T_XKNVA       = T_XKNVA
    T_XKNVD       = T_XKNVD
    T_XKNVI       = T_XKNVI
    T_XKNVK       = T_XKNVK
    T_XKNVL       = T_XKNVL
    T_XKNVP       = T_XKNVP
    T_XKNVS       = T_XKNVS
    T_XKNEX       = T_XKNEX
    T_XKNZA       = T_XKNZA
    T_YKNAS       = T_YKNAS
    T_YKNB5       = T_YKNB5
    T_YKNBK       = T_YKNBK
    T_YKNVA       = T_YKNVA
    T_YKNVD       = T_YKNVD
    T_YKNVI       = T_YKNVI
    T_YKNVK       = T_YKNVK
    T_YKNVL       = T_YKNVL
    T_YKNVP       = T_YKNVP
    T_YKNVS       = T_YKNVS
    T_YKNEX       = T_YKNEX
    T_YKNZA       = T_YKNZA
=============================================================

How to revert the data that is loaded using BDC for transaction PA30

Similar Messages

Maybe you are looking for