Delete VLAN Database 3850

Hello,
I'm trying to delete old vlans and have the database back to default on a stack of 3850s.
I've removed the VLAN.DAT from each flash directory so it has completely gone. Rebooted but all old vlans still are there.
I tried changing the switch to different vtp modes also and also the VTP domain name. Everytime I reload though the old VLANS are still there. I know I can manually remove them using no vlan xxxx but there are a lot and there must be an easier way.

Removing the vlan.dat file should normally remove all vlans on the switch after a reboot.
As an alternative u can use the no vlan 10-100 command and you can delete a range of vlans.
Zee

Similar Messages

Deleting Vlan database

Hi, I tried deleting the vlan database on a 2950 switch. delete flash:/vlan.dat
however, after i reload the switch, the vlans are still there. Any ideas?
Also, is there any other way of deleting the vlan database w/o reloading? apart from manually deleting each vlan one-by-one

Hello,
I have done the same operation (delete vlan.dat + reload) on a WS-C2950-24 with c2950-i6q4l2-mz.121-22.EA6.bin.
Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#vlan 2
Switch(config-vlan)#name toto
Switch#
00:08:06: %SYS-5-RELOAD: Reload requested
witch>sh vlan
VLAN Name Status Ports
1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4
Fa0/5, Fa0/6, Fa0/7, Fa0/8
Fa0/9, Fa0/10, Fa0/11, Fa0/12
Fa0/13, Fa0/14, Fa0/15, Fa0/16
Fa0/17, Fa0/18, Fa0/19, Fa0/20
Fa0/21, Fa0/22, Fa0/23, Fa0/24
2 toto active
1002 fddi-default act/unsup
1003 token-ring-default act/unsup
1004 fddinet-default act/unsup
1005 trnet-default act/unsup
Switch#delete vlan.dat
Delete filename [vlan.dat]?
Delete flash:vlan.dat? [confirm]
Switch#reload
Proceed with reload? [confirm]
00:00:50: %SYS-5-RELOAD: Reload requested
Switch>sh vlan
VLAN Name Status Ports
1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4
Fa0/5, Fa0/6, Fa0/7, Fa0/8
Fa0/9, Fa0/10, Fa0/11, Fa0/12
Fa0/13, Fa0/14, Fa0/15, Fa0/16
Fa0/17, Fa0/18, Fa0/19, Fa0/20
Fa0/21, Fa0/22, Fa0/23, Fa0/24
1002 fddi-default act/unsup
1003 token-ring-default act/unsup
1004 fddinet-default act/unsup
1005 trnet-default act/unsup
Switch#dir
Directory of flash:/
2 -rwx 109 Mar 01 1993 00:04:47 +00:00 info
3 -rwx 3110758 Mar 01 1993 00:06:29 +00:00 c2950-i6q4l2-mz.121-22.EA6.bin
4 drwx 4160 Mar 01 1993 00:07:04 +00:00 html
373 -rwx 109 Mar 01 1993 00:07:40 +00:00 info.ver
375 -rwx 5 Mar 01 1993 00:08:05 +00:00 private-config.text
377 -rwx 1098 Mar 01 1993 00:08:05 +00:00 config.text
7741440 bytes total (2992128 bytes free)
Switch#
So I don't understand why on your case, it doens't work. :/
I am interesting what is the behaviour.
Regards.

2.02 Bug ?? Deleted vlans showing up on vNICs

Since 2.0.2 has come out I have experianced an issue at each install in which deleted vlans (from global database) are still showing up in the vNIC templates and therefore the vNICs of all hosts. When vlan is deleted, it is removed from vnic template as active however it still remains live until under the template, vnic interfaces tab, I manually delete the old non existing vlans. Anyone seen this ??
dave

Hi dave,
We do already have a bug under which this behaviour is being tracked:
Here is the bug:
CSCtx65534 VLAN deletion creates orphan in service profile and traffic interuption
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtx65534
A side note:
this behaviour is not coming from UCS but rather coming from NXOS. we did a quick test on n5k (running nxos) and saw the same behaviour.
Thanks!
./abhinav

CAT6500 - VLAN DATABASE saving and restoring - question

If one wants to change the SUP720 module on a CAT6500, then how is the VLAN DATABASE trasnfered from original to new module. For startup config one can tftp the config from old module and then tftp back the same into new module. How about vlan database. Is there any way of copying vlan database from old module to a tftp server and then back into new module.

You can copy the vlan.dat using tftp from the const_nvram:. Under that location should should see a file vlan.dat. But as you are warned when you enter the vlan database, vlan.dat is being deprecated and it is recomended to add or delete vlan from the configuration mode. Vlan from the confguration mode is saved in the start-up configuration.
Router#dir const_nvram:
Directory of const_nvram:/
1 -rw- 616 vlan.dat
126956 bytes total (126340 bytes free)
Router#copy const_nvram:vlan.dat tftp
Address or name of remote host []? 10.1.1.1
Destination filename [vlan.dat]?
Please rate helpful post.

Delete a database in Essbase application

I am getting the error as" Object locked by a user' when I try to delete a database in essbase application. Please advice how to delete it.

Hello,
You're in the wrong forum. This is the BDB JE forum. The Essbase forum is here:
Essbase
Please post your question there.
--mark

"Delete on Database" in /SAPAPO/SDORDER_DEL

Dear All,
Can somebody help explain what happens when we execute "Delete on Database" in /SAPAPO/SDORDER_DEL? and how would the program acts for each selection parameters, if;
- we have not put anything in the selective deletion portion of the screen for "Location", "Product", and "Last Changed Before" fields, don't tick the check box for "Without check" option; but tick the check boxes for "Adjust ATP tables with /SAPAPO/POSMAPN table" and "Delete Obsolete Records in the /SAPAPO/POSMAPN table" in the additional function, what will happen? Will it delete anything? Or will it only do as what the additional function says?
- how about in the product allocation data portion, considering that we have specified a location, what is being deleted when the check box for "Delete Product Allocations" is ticked? and what is being done if the check box for "Check Product Allocation Assignment" is ticked?
Thanks in advance for any response.
Regards,
Philip

Dear Philip,
Find below few points about this transaction.
1. check is normally carried out before an order is deleted to see if this order still exists in liveCache. If this is the case, the order is not deleted.
2. You can also print out a list of the orders that cannot be deleted if you have set the relevant indicator.
3. In exceptional cases, you can deactivate this check and nevertheless still delete the selected orders.
4. If you have set the Delete all orders indicator, the order data from the database is completely deleted without any check. You should take great care when using this function.
5. A location product or a location can only be deleted if SD sales documents for this location product no longer exist in the database (that is, if, for example, no more entries exist in the tables /SAPAPO/ORDADM_I or /SAPAPO/ORDPART).
Regards,
Siva.

How to delete a database record by using EJB entity beans

Hi, All,
Does anyone know how to use entity bean to delete a database record? I have all the EJB entity beans created, including access beans to each. I can successfully create records, find and update records, however, I haven't find a way to delete records yet.
Your response is appreciated.
Cathy

Please see EJB Forums for continue discussion on this subject.
Reference titile: "how to delete database record by using CMP entity beans "

ADF delete from database.

Hi,
I am trying to design a page which will delete a particular row from one or more database tables. The jdeveloper version is 11.5 and the database is oracle 10.2 version.
How can I do it?
Thanks

Hi all, Thanks for the reply..
Actually I am trying to delete one record at a time, from the same table, from which m populating it on the jspx..
That means the list source and the base source are same..which is not possible..
What can be the solution for it ??
I tried to create a separate view object for population on jspx and kept it in list source.. And I am using different view object in base source.. Both view objects refer to the same table..
But it is not working out..the problems are..
The record is getting deleted only for the first time when i run it.. Even after getting deleted from database, the record shows up in the list..
And when i do the same operation one more time in the same session, 1st record in the table is getting updated with the value which i tried to delete..
And I am not using managed bean..
regards

DELETE FROM DATABASE + restored again?

there is a statement
DELETE FROM DATABASE <dbtab> (<ar>) [CLIENT <cli>]
ID <key> .
Suppose I have mistakenly deleted from the database
can it be

Hi,
there is a syntax like DELETE FROM DATABASE as you mentioned.
But never ever use that to delete a record in DATABASE TABLE as you cannot recover that data.
hope this helps.

Delete a database from a server in Business Process Architect

Hi Friends,
Does anybody know how to delete a database from a server in Business Process Architect? I don't see any option to perform delete. I am using version 10.1.3.4.
Thanks
Tridib

Thanks for reply
Actually i want to delete the jobs from the Url below
http://xyz:7778/reports/rwservlet/showjobs?server=testreport which gives all the jobs when u click on anyone job it open the pdf file which is stored in cache i want this job to be deleted including the file.
I think there is a target.xml file which show the job in IAS OEM for a report server if the report server is added in target.xml from oem we can delete the jobid and file.
where should i go to see the report server in oem?
Regards

How to delete a Database view?

HI Everyone,
Created a Database in ECC to get the bank details from two tables BNKA and BKPF,
but now I wanted to delete this View. Can someone tell me how to delete the Database view?
Thanks
Vandana

Goto SE11 > select radio button for view > type view name > press delete icon in top menu (where you have icons for activate, check etc).
Regards,
Gaurav

Manually delete a database

Hi everybody,
on this forum i cannot find a procedure to manually delete a DB.
I've got 2 database installed on a Linux server and i'd like to get rid of one..
What can I do to completely delete a database?
I haven't got any utilities (like dbca)..
Hope somebody can help me, thanks in advance!

You have not said why you need to manually delete it. Also you did not state your Oracle release.
You can use DROP DATABASE command. This will drop the database, deletes all control files and all datafiles. If you are using spfile, it will delete it. Archivelogs and Backups are not deleted with this command, but you can then use RMAN or your Operating System command to delete all archivelogs and backups where required.
e.g
SQL> SHUTDOWN IMMEDIATE;
SQL> STARTUP MOUNT;
SQL> DROP DATABASE;

Enabling "Delete a Database" option in DBCA

Hi,
I want to delete my database using DBCA, i know i can directly drop the database , since i have tried all options to enable the option of
"+Delete a Database+" but guess need right process...i have also tried by stopping all oracle services ..but still the option is DISABLED
need experts experience..why this is happening and how i can overcome by this...
I am uisng oracle 10g, OS: Windows...
thanks
SG

I uninstalled Oracle 10g completly and then installed again, adding the database seprately using DBCA and checking DBCA again, the delete the database was activated.
Resolved the problem same day..thought would close the unanswered Q.
Thanks..

Delete a database option is not available in DBCA

Hello,
I have HP-UX 11v3. I have installed Oracle Standard Edition 10.2.0.1 and after that I installed 10.2.0.4 Patch Set.
I configured two databases using DBCA. At the end I save scripts (not create database) and run script from shell.
The databases are up and running.
I tried to delete one database through DBCA, but option Delete a database (and also "Configure Databse Option") is not available, they are grey.
What is the problem? What should I do to get option to delte both databases from DBCA?
Regards,
Lovro

pavli wrote:
Hello,
I have HP-UX 11v3. I have installed Oracle Standard Edition 10.2.0.1 and after that I installed 10.2.0.4 Patch Set.
I configured two databases using DBCA. At the end I save scripts (not create database) and run script from shell.
The databases are up and running.
I tried to delete one database through DBCA, but option Delete a database (and also "Configure Databse Option") is not available, they are grey.
What is the problem? What should I do to get option to delte both databases from DBCA?
Regards,
LovroDBCA reads the ORATAB file on Unix to determine what databases exist to be dropped (and DBUA does the same to determine which databases are to be upgraded). Most likely the ORATAB file does not contain an uncommented entry for your database.
Niall Litchfield
http://www.orawin.info/

How to Delete a Database on ASM

I am trying to delete a database which seems to be on ASM but I get the errors below. I have limited exposure on ASM so not sure how to proceed. Can someone help?
$ dbca -silent -deleteDatabase -responseFile dbca_response.rsp
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file '+DATA/orcl/spfileorcl.ora'
ORA-17503: ksfdopn:2 Failed to open file +DATA/orcl/spfileorcl.ora
ORA-15077: could not locate ASM instance serving a required diskgroup

hi,
this may be reason..
ORA-01565: error in identifying file 'string'
Cause: An error occurred while trying to identify a file.
Action: Check the error stack for detailed information.
issue (Metalink Note 390591.1). We encountered similar issue in Linux RAC cluster and has been resoled by following this note.
Cause
=====
Installing the 10.2.0.2 patchset in a RAC installation on any Unix platform does not correctly update the libknlopt.a file on all nodes. The local node where the installer is run does update libknlopt.a but remote nodes do not get the updated file. This can lead to dumps or internal errors on the remote nodes if Oracle is subsequently relinked.
Solution
========
There are two solutions for this problem:
1) Manual copy of the "libknlopt.a" library to the offending nodes :
- ensure all instances are shut down
- manually copy $ORACLE_HOME/rdbms/lib/libknlopt.a from the local node to all remote nodes
- relink Oracle on all nodes :
make -f ins_rdbms.mk ioracle
2) Install the patchset on every node using the "-local" option:
On Unix:
runInstaller -updateNodeList -local ORACLE_HOME=$ORACLE_HOME CLUSTER_NODES=node1,node2,...
On Windows:
setup.exe -updateNodeList -local ORACLE_HOME=%ORACLE_HOME% CLUSTER_NODES=node1,node2,...
ORA-10577: Can not invoke test recovery for managed standby database recovery
Cause: Test recovery option is used for managed standby database recovery.
Action: Either remove the test recovery option or invoke manual test standby database recovery
regards,
Deepak
Edited by: Deepak_DBA on Oct 13, 2009 12:51 PM
Edited by: Deepak_DBA on Oct 13, 2009 12:54 PM

Delete VLAN Database 3850

Similar Messages

Maybe you are looking for