Deleting a transport while being imported will cause data corruption ?

Hello,
Could someone please advise whether deleting a transport request while being imported (having the truck symbol) will cause a data corruption, or that all the changes done to the file system will be rolled-back ?
Thank you in advance for your cooperation.
Best regards.
Reda Khalifa

Please note that the production system usually is locked for changes,
E g it is not possible to retreive previous version of objects (not allowed).
kaushal is right, if you have the very same object in an older request, you can choose to import it again.
Please be carefull since all objects in the request will be imported, so it's important that only the objects you want to reset is in the request.
Depending on the transport system setup, you might need to delete the request from the import queue, add it via menu Xtras --> Other Requests --> Add and enter the request
Select the old request for import.
Note that you need to set the option "Import Transport Request Again" otherwise nothing will happen.

Similar Messages

  • How do i delete photos which were being imported and are now stored in a folder which i can't access

    how do i delete photos which were being imported and are now stored in a folder which i can't access

    Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
    Look there for a Folder called 'Import' or 'Importing'.
    Drag it to the Desktop. *Make no other changes*.
    Start iPhoto. Does that help?
    If it does then look inside that folder on your desktop. Does it contain anything you want? If not you can trash the folder.

  • Changes will cause Data to be deleted message

    Hi,
       Here is the issue I am experiencing:
    1. I have a UDO of Master Data type and created a custom form to Add/Update/Delete data.
    2. When I scroll through each record, I get a message "Changes will cause Data to be deleted". Continue?
    I have confirmed that the form is in OK mode. How can I make this message go away?
    Gopal

    Hi Gopal,
    Even if the form is in OK mode, the edits cause the form to go into Update mode, which is why you see this message.
    If it suits your scenario, set "AffectsFormMode" property to false for items which should not trigger a mode change (if loading the form from XML, set AffectsFormMode="0")
    You can also look at these form properties:
    Form.AutoManaged
    Form.SupportedModes
    Regards
    Aravind

  • Deleting emails with no subject content will cause the app to close and when returning to the app the previous emails that have been deleted re-appear.  This is happening ever time I receive emails with no content.  Is this spam and what kind of

    Internet protection is the for the iPad if any?

    I've been having deleting problems, too, and finally found a couple of fixes here on the message boards. I'll copy and paste them for you. It doesnt fix why it happens, but at least you can delete your emails.
    (at least it works so far!)
    bigj6360
    Level 1 (10 points)
    Correct AnswerRe: email message crashes mail on ipad
    Jul 9, 2011 5:33 PM (in response to Geoff Gentry)
    Hey try this.
    Swipe to delete. When you are in either portrait or landscape view swipe from left to right over the message in the inbox listing. That should show a delete option without loading the email. Worked for me.
    Eric Ross
    SF Bay Area
    Level 4 (2,770 points)
    Re: email message crashes mail on ipad
    Jul 9, 2011 5:42 PM (in response to Geoff Gentry)
    You can also do this go into your settings>mail, contacts, calendars then turn off the "load remote images" then try to delete the message. 

  • HELP iPhone 5 got reformatted while being updated. not all datas recovered from iCloud.

    I recently updated my iphone5 with iOS 7.0.3 but while updating it was reformatted. I tried to recover my apps and photos from iCloud but not all datas were recovered. I am sure that I was able to back up my phone regularly. Only new photos were recovered the older ones which were the first ones that I backed up cant be found. Can I still recover those datas?

    Restoring the backup should recover the photos that were in the camera roll at the time of the backup.  If that didn't happen, all you can do is try restoring the backup again.  You might try some of the tips mentioned in this discussion thread that other's found useful when they had a similar problem, such as the one by ezjules: https://discussions.apple.com/message/19518589#19518589.

  • Error While importing the transaction data

    All SAP BPC Gurus,
      I need your help in resolving this error,  I have encountered this below error while uploading (importing) the transaction data of (Non-Reporting) application,  Would you please help me resolving this error.  I don't know if i'm doing anything wrong or is anything wrong with the setup.
    I used DataManager in EXCEL BPC and Ran the IMPORT Transaction Package.
    /CPMB/MODIFY completed in 0 seconds
    /CPMB/CONVERT completed in 0 seconds
    /CPMB/CLEAR completed in 0 seconds
    [Selection]
    FILE= DATAMANAGER\DATAFILES\IFP_BPCUSER121\rate data file.csv
    TRANSFORMATION= DATAMANAGER\TRANSFORMATIONFILES\SYSTEM FILES\IMPORT.XLS
    CLEARDATA= No
    RUNLOGIC= No
    CHECKLCK= No
    [Messages]
    Task name CONVERT:
    XML file (...ANAGER\TRANSFORMATIONFILES\SYSTEM FILES\IMPORT.TDM) is empty or is not found
    Cannot find document/directory
    Application: PLANNING Package status: ERROR

    are you using the standard "Import" data package?
    Check the code in the Advanced tab of the Import data package
    Check your Transformation file is in correct format.
    code in Advaced tab should be as  below:
    PROMPT(INFILES,,"Import file:",)
    PROMPT(TRANSFORMATION,%TRANSFORMATION%,"Transformation file:",,,Import.xls)
    PROMPT(RADIOBUTTON,%CLEARDATA%,"Select the method for importing the data from the source file to the destination database",0,{"Merge data values (Imports all records, leaving all remaining records in the destination intact)","Replace && clear datavalues (Clears the data values for any existing records that mirror each entity/category/time combination defined in the source, then imports the source records)"},{"0","1"})
    PROMPT(RADIOBUTTON,%RUNLOGIC%,"Select whether to run default logic for stored values after importing",1,{"Yes","No"},{"1","0"})
    PROMPT(RADIOBUTTON,%CHECKLCK%,"Select whether to check work status settings when importing data.",1,{"Yes, check for work status settings before importing","No, do not check work status settings"},{"1","0"})
    INFO(%TEMPNO1%,%INCREASENO%)
    INFO(%ACTNO%,%INCREASENO%)
    TASK(/CPMB/CONVERT,OUTPUTNO,%TEMPNO1%)
    TASK(/CPMB/CONVERT,ACT_FILE_NO,%ACTNO%)
    TASK(/CPMB/CONVERT,TRANSFORMATIONFILEPATH,%TRANSFORMATION%)
    TASK(/CPMB/CONVERT,SUSER,%USER%)
    TASK(/CPMB/CONVERT,SAPPSET,%APPSET%)
    TASK(/CPMB/CONVERT,SAPP,%APP%)
    TASK(/CPMB/CONVERT,FILE,%FILE%)
    TASK(/CPMB/CONVERT,CLEARDATA,%CLEARDATA%)
    TASK(/CPMB/LOAD,INPUTNO,%TEMPNO1%)
    TASK(/CPMB/LOAD,ACT_FILE_NO,%ACTNO%)
    TASK(/CPMB/LOAD,RUNLOGIC,%RUNLOGIC%)
    TASK(/CPMB/LOAD,CHECKLCK,%CHECKLCK%)
    TASK(/CPMB/LOAD,CLEARDATA,%CLEARDATA%)

  • Importing a test playlist of 12 songs yielded 386 songs being imported and all the music on my Ipad being deleted.

    Problem: iTunes imported 30 times more tracks than I told it to, while deleting all of the tracks that where currently on my iPad.  I am 100% sure that I did not have any additional fitlers selected as I did a full go through twice to ensure no ablums/Genre boxes where checked.  Also the tracks it randomly imported are compeletly random in that they where not apart of any playlist.
    Specifics: I told iTunes to check for MP and ACC files on my computer.  It found them and made them available in the iTunes library.  Apple support site said to create a playlist then drop the tracks into it.  I created 'Test' dropped in 12 tracks and then went to my iPad in iTunes.  I then went to music and selected "selected playlist, artists....." Where by I only clicked on "test" in which case the progress bar informed me 386 songs where being imported.  I let it finish syncing to see what the final outcome was.  It did get the 12 tracks I told it to + 374 more + deleted my current music.
    Rant: Why is iPad so ********?  This thing is teetering closely with being returnd.  Following an online guide from the OEM shouldn't yeild any other result than what they claim it should.  This has nothing to do with the typical Windows to Mac learning curve either as I am typing this from a Mac Book Pro, which is regardless as I followed an online guide.  I like my Mac Book Pro pretty well, but this iPad2 is the more cumbersome peice of equipment I've ever had to use.
    ***: Why did it delete my current tracks?  I did not stumble upon any information that said it would delete the directory it is about to copy into.  If this is standard then its standard but it seems like a bug to me.  Also why did it important hundreds of extra tracks?  My full library has about 3000 tracks and my iPad had plenty of room to accomidate more than the 386 tracks it copied over.
    Any clarification on this would be handy.  Thanks for the time you spent reading this as well.
    -Thai

    Hey Georgia
    The first link below will get you iTunes downloaded to your computer. Check your purchase history to download any previous purchase and the second article will assist with that. The final actable will assist with transferring any purchased content from your iPhone to your MacBook Air, anything that was not purchased will not transfer.
    iTunes 11.1.2
    http://support.apple.com/kb/dl1614
    Downloading past purchases from the iTunes Store, App Store, and iBooks Store
    http://support.apple.com/kb/ht2519
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    http://support.apple.com/kb/ht1848
    Regards,
    -Norm G.

  • Transports while importing  DS error "Source system QAS does not exit "

    Hi Experts,
          For a specific reason we are importing a DS from quality to development.While importing DS in Development side we are getting an error " Source system QAS does not exist".Error message as  below:
       Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Activation Mode)
       Source system QAS does not exist
       Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode)
       There is no DataSource with these attributes
       Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Delete Mode)
       Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Delete Mode)
       Start of the after-import method RS_ISCS_AFTER_IMPORT for object type(s) ISCS (Delete Mode)
       Start of the after-import method RS_ISTD_AFTER_IMPORT for object type(s) ISTD (Delete Mode)
       Start of the after-import method RS_ROUT_AFTER_IMPORT for object type(s) ROUT (Delete Mode)
       Errors occurred during post-handling RS_AFTER_IMPORT for ISCS L
       The errors affect the following components:
          BW-WHM (Warehouse Management)
       Post-import methods of change/transport request CXCK900023 completed
            Start of subsequent processing ... 20090306024549
            End of subsequent processing... 20090306024550
       Execute reports for change/transport request: CXCK900023
       Reports for change/transport request CXCK900023 have been executed
            Start of................ 20090306024550
            End of.................. 20090306024550
       Execution of programs after import (XPRA)
       End date and time : 20090306024550
       Ended with return code:  ===> 8 <===
    Our system sap bi is not new system, we are using from long time.Transports are working while moving dev to quality and quality to prod.
    Can any body suggest on this.
    Regards
    Vinod

    Hi vinod kumar,
    i hope you need to map source system From QAS to DEV system,
    genereally from DEV to QAS configuration will be there, but here request is moving from QAS to DEV so i think this should be configured.
    RSA1-> Tools -> conversion of logical system names -> maintain original system and target system name for both BI and ECC systems.
    Regards
    Daya Sagar

  • Trash will not delete from trash folder! What can cause this effect?

    Trash will not delete from trash folder! What can cause this effect?

    u can actually force it to delete, oviously i assume you dont have the application or data etc open neware else?
    try restarting your computer, go into finder close all your open applications etc, servers, **** even clear your data in your web browser, do a disk utility check and verify your drives and repair em if nessicary.
    as chamar suggested look at http://www.thexlab.com/faqs/trash.html
    i had the same problem before but with a good 5-10 minutes of googling i was able to solve it..
    best of luck

  • When using Iphoto to import photo from existing folder, what happens if I delete the photo in Iphoto ? Will the original file in the folder be deleted too?

    When using Iphoto to import photo from existing folder to iphoto, what happens if:
    1. I delete that photo in iphoto? will the original file in the folder be deleted too ?
    2.  when importing, does the hard disk store 2 versions of the photo, hence occupying additional space in the harddisk?

    1 - no  --  iPhoto only manages fiel within the iPhoto library - it does not ever do anything with files outside the library
    2 - No idea what you are asking - by default (and strongly recommended) iPhoto copies the original to the iPhoto library and you delete the source file outside the iPhoto library - iPhoto alwasy has at least two versions of every photo and some times three - it always have the original, a thumbnail and once a photo is modified a preview - this is not optional - if it is not what you want then iPhoto is not the correct progrtam to be using for phopto management
    LN

  • TS1702 I have an app that appears to need to be updated. I clicked to update three days ago. It has started to update and will not finish. How can I delete the app while its in the middle of updating?

    IPhone 5
    I have an app that appeared to need to be updated. I clicked to update three days ago. It has started to update and will not finish. How can I delete the app while its in the middle of updating?

    Locked on an update can mean a couple of different things. So there are a number of things to try, but start with these.
    If you have a "waiting" icon, try tapping on the icon and see if you can pause the update/download. Of it pauses, tap on it again and see if it will resume.
    Try holding down on the icon until all of the icons on the screen wiggle. If the X to delete pops up on the waiting/stalled app -  tap the X to delete the app. Tao,the home button and the apps will stop wiggling.
    You can also try this and see if the downloads will resume. Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • I was on the phone last night and my phone randomly turned off.  It will not come back on even when I have tried to hold the home button and the power button together while being plugged into the computer.  What do I do?

    I was on the phone last night and my phone randomly turned off. It will not come back on even when I have tried to hold the home button and the power button at the same time, while being plugged into the computer? What do I do?

    Plug it into power for at least 15 minutes.  If it doesn't automatically come on, try a reset... press the home and sleep (on/off) buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

  • Changes will cause the data to be deleted message is misleading

    We find that the message 'Changes will cause the data to be deleted' is misleading and causes a great deal of concern to our users when it appears say when they are just trying to find information and are browsing from one transaction to another. Is there anyway we can get this message amended for certain scenarios at least?

    Sam,
    someone asked this few days ago.
    [look here|Is It Possible to block system message;
    i suggested to catch the statusbar and Petr suggested to catch the Event and click it away with sending "enter"
    thats it - i hope it helps
    regards
    David
    PS: Welcome to the Forum

  • Will not charge while being use

    I have just noticed that my iPhone 3G will not charge when I have it plugged in and using it. With the phone plugged into the wall ac and using the telephone the battery will discharge down to red. This takes about two hour. Everything else I have electronic will switch to AC and trickle charge while being used. I also tried a hard reset that someone posted on the web and this did work one time, but now it is back to the same routine. With out the ac adapter the phone will not last long. What is going on?

    The iPhone includes protection for the battery when charging. If the battery's heat exceeds a designated temperature when charging (charging alone increases the temperature of the battery), and depending on usage during that time which also increases the iPhone's internal temperature, charging will stop until the temperature is reduced.
    When you stop using your iPhone when connected to a power source, does it begin charging?

  • Inovice is not being importe while running Request :Payables Open Interface

    Dear
    We are on release on R12, We need to import legacy invoice into oracle e-business thought import program,
    Right now we are working on to import invoice through subject mentioned request, but after running this request
    System is not being import invoice and showing message as below mentioned.
    I have also mentioned insert query through do this.
    We are on release on R12, We need to import legacy invoice into oracle e-business thought import program,
    Right now we are working on to import invoice through subject mentioned request, but after running this request
    System is not being import invoice and showing message as below mentioned.
    I have also mentioned insert query through do this.
    MSG-00000: 0 invoice(s) were created during the process run
    MSG-00000: 0 invoice(s) were fetched during the process run
    MSG-00000: summarize flagN
    insert into AP_INVOICES_INTERFACE (
    invoice_id,
    workflow_flag,
    invoice_num,
    vendor_id,
    vendor_site_id,
    invoice_amount,
    INVOICE_CURRENCY_CODE,
    invoice_type_lookup_code ,
    invoice_date,
    gl_date,
    DESCRIPTION,
    -- PAY_GROUP_LOOKUP_CODE,
    source,
    org_id )
    values ( 132277,
    'D',
    'INV100',
    '1401',
    '192',
    1200.00,
    'PKR',
    'STANDARD',
    sysdate,
    sysdate,
    'This Invoice is created for test purpose',
    -- 'WUFS SUPPLIER',
    'Manual Invoice Entry',
    82 );
    3cs test scenario
    insert into AP_INVOICE_LINES_INTERFACE (
    invoice_id,
    line_number,
    line_type_lookup_code,
    amount )
    values (132277,
    1,
    'ITEM',
    1200.00
    appreciate your response
    --thanks                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

    Thanks for reply,
    As you mentioned regarding operating unit, we were passing it throught backe-end and fron as well, but still the same error appearing, and we need to do this asap, becuase we are going to live and we don't have much time.
    Kindly any body can guide me to reslove this problem,

Maybe you are looking for