Deleting Adapter engine queues

Hi Experts,
                 While trying a proxy to database scenario My message is (processed Successfully in SXMB_MONI) getting stuck in Receiver JDBC channel and the status of the message is DELEIVERING. How can i delete the messages from the adapter engine queue. I am trying to cancel the messages from the Message monitoring in the RWB but i am not able to cancel that message due to which other messages are also in DELEIVERING state.
Thanks
Ajay

Hi,
1) How can i know the Queue ID in the Adapter engine as my message is processed succesfully from SAP-XI and stuck in adapter engine.
A) See the Blog for this
2) Is it mandatory that we have to clear the Very First message which is in the queue , means other messages which all are in DELIEVERING stage can't be deleted?
A) YES, Its mandatory to clear the very first strucked message
Regards
Seshagiri

Similar Messages

  • Adapter engine queue monitoring

    Hi All,
    I have one doubt about adapter engine queue.
    We can see adapter engine queue in  RWB->Message Monitoring-> Adapter engine-> Display  .
    Here in queue if one message goes in to system error status, remaining all messages from that queue goes on holding status.
    So unless someone manually clears this system error message, remaining messages from same queue will not be processed.
    Is there anything to automate this process? Because currently someone has to manually monitor this queue and clear the message if it is in system error.
    Thanks in advance.
    Warm Regards,
    Gouri

    Hi Bhavesh,
    I am getting a PO file from source system which contains data and control record. But target system expects two different files for data and control. So in mapping program I have done this.
    When interface split happens for one scenario and the multiple messages are going to the same receiver, an internal queue name is generated from the message ID of the original message, to ensure that the correct processing sequence is maintained. As a result, the quality of service switches from EO to EOIO. Here is the reference link:
    http://help.sap.com/saphelp_nw04/helpdata/en/28/68073c8e56f658e10000000a114084/frameset.htm
    Also can you please elaborate on CCMS?
    Thanks in advance.
    Warm Regards,
    Gouri

  • Adapter Engine Queue

    Hi.
    I got yhe following error in default trace.
    ==========
    Could not get next EOIO QueueMessage from MessageStore. Reason: com.sap.aii.af.ra.ms.api.MessagingException: Error retrieving message from database store. Reason: Could not create Message. Reason: com.sap.aii.af.ra.ms.api.MessagingException: Could not parse XMBMessage due to Binary index out of range: 1613824 Putting message back into sequencer for manual retry.#
    #1.5
    ==========
    I check the
    http://<host>:<port>/MessagingSystem/monitor/systemStatus.jsp, and found the following information.
    ?EOIO   Status   HOLD  -> 1
    ?????????   TBDL  -> 1
    ?Matrix  one of the Adapter
    ???????????TBDL -> 6
    ???????????Size -> 161384
    I think the Adapter Engine queue size is overflow.
    (It is 161384).
    Question1
    How can I restart this "TBDL" message?
    I tried to restart from RWB -> message monitoring,
    but could not deliver cause of error.
    Question2
    How can I change the "queue size"?
    There are documents that refer to "thread count",
    not but "queue size".
    The thread count is default. It's "5".
    best regards,

    Thank you for your replying.
    I retry the message, but the error occured again.
    I check this message by performance monitoring on RWB.
    Nomarry this inerface process the "5 messsages" at one time.
    The average message size is "2MB".
    The "TBDL" message size is 2MB(I mean average size),
    but the number of the message is "19"!!
    Should I increase the number of threads?
    regards,

  • Messages got stuck in inbound adapter engine queue

    Hi Experts,
    My senario is File - XI -SAOP reciever and we have 8 usecases of same type. For 7 usecase, we dont have any problem. But for only one use case we have having heavy delay in processing messages.
    All  my messages got stuck in inbound queue of Adapter engine in to be delivered state, wait state, delivering state.
    Please see the below logs and suggest some solution.
    To be delivered Message log  :
    Time Stamp Status Description
    2008-06-30 06:54:20 Success Processing child message of multi-message with message ID 8c597510-466f-11dd-92f9-000f203c93e0
    2008-06-30 06:54:20 Success Using connection AFW. Trying to put the message into the receive queue.
    2008-06-30 06:54:20 Success Message successfully put into the queue.
    Waiting Message log :
    Audit Log for Message: 4864ad2b-cabd-5891-e100-00000aa3fdb2
    Time Stamp Status Description
    2008-06-30 06:42:24 Success Processing child message of multi-message with message I
    2008-06-30 06:42:24 Success Using connection AFW. Trying to put the message into the receive queue.
    2008-06-30 06:42:24 Success Message successfully put into the queue.
    2008-06-30 07:46:16 Success The message was successfully retrieved from the receive queue.
    2008-06-30 07:46:16 Success The message status set to DLNG.
    2008-06-30 07:46:16 Success Delivering to channel: CC_SOAP_Receiver
    2008-06-30 07:46:16 Success SOAP: request message entering the adapter
    2008-06-30 07:51:24 Success SOAP: call failed
    2008-06-30 07:51:24 Success SOAP: sending a delivery error ack ...
    2008-06-30 07:51:24 Success SOAP: sent a delivery error ack 
    2008-06-30 07:51:24 Error SOAP: error occured: java.net.SocketTimeoutException: Read timed out
    2008-06-30 07:51:24 Error Exception caught by adapter framework: Read timed out
    2008-06-30 07:51:24 Error Delivery of the message to the application using connection AFW failed, due to: Read timed out.
    2008-06-30 07:51:24 Success The asynchronous message was successfully scheduled to be delivered at Mon Jun 30 07:56:24 GMT 2008.
    2008-06-30 07:51:24 Success The message status set to WAIT.
    Delivering Message log :
    Audit Log for Message: 4864ad2d-cabd-5891-e100-00000aa3fdb2
    Time Stamp Status Description
    2008-06-30 06:42:24 Success Processing child message of multi-message with message ID 7481f110-466f-11dd-b8ce-000f203c93e0
    2008-06-30 06:42:24 Success Using connection AFW. Trying to put the message into the receive queue.
    2008-06-30 06:42:24 Success Message successfully put into the queue.
    2008-06-30 07:46:24 Success The message was successfully retrieved from the receive queue.
    2008-06-30 07:46:24 Success The message status set to DLNG.
    2008-06-30 07:46:24 Success Delivering to channel: CC_SOAP_Receiver
    2008-06-30 07:46:24 Success SOAP: request message entering the adapter
    2008-06-30 07:51:24 Success SOAP: call failed
    2008-06-30 07:51:24 Success SOAP: sending a delivery error ack ...
    2008-06-30 07:51:24 Success SOAP: sent a delivery error ack 
    2008-06-30 07:51:24 Error SOAP: error occured: java.net.SocketTimeoutException: Read timed out
    2008-06-30 07:51:24 Error Exception caught by adapter framework: Read timed out
    2008-06-30 07:51:24 Error Delivery of the message to the application using connection AFW failed, due to: Read timed out.
    2008-06-30 07:51:24 Success The asynchronous message was successfully scheduled to be delivered at Mon Jun 30 07:56:24 GMT 2008.
    2008-06-30 07:51:24 Success The message status set to WAIT.
    Thank you
    Subbu

    Dear Subramanyam,
    Some message might be struck in the queue. Because of this reason furthur processing is not performed on time.
    Please try to do like this:
    Go to SXMB_MONI, or SXi_monitor, select QueueID in the row, which is showing green flag. In the next window belongs to queue select the queue and press unlock button on the panel.
    This could possibly release the queue which is struck.
    Best Regards
    Praveen

  • Message stuck in Adapter Engine queue with status "Delivering"

    Hi All,
    I have a File to File EOIO scenario. The messages are sucessfully delivered from IE to AE. All entries have a chequered flag in SXMB_MONI. No messages are stuck in IE queue (SMQ2). But the message is stuck in AE queue with status "Delivering". I can not resend or cancel the message coz the status is "delivering".
    The reason it is in "delivering" status is due to some config error that I made in Communication Channel FTP parameters. Now it is corrected. But how do I deal with this message now?
    Restart of server is not an option here. Is there are place I can delete the message from AE queue?
    Thanks
    Jaishankar

    You can see the queues status (and number of stuck entries etc) through the link:
    http://<host>:<port>/MessagingSystem/monitor/systemStatus.jsp
    There, you can maintain the queues.
    There is also a link for the EOIO Sequence Monitor:
    http://<host>:<port>/MessagingSystem/monitor/sequenceMonitor.jsp
    There you can see the stuck messages and maintain these.
    Make sure to handle the proper message IDs.
    All of these are acessible through the Messaging System main page:
    http://<host>:<port>/MessagingSystem/
    Regards,
    Henrique.

  • Adapter Engine queues

    Hi all,
    XI is sending messages (several interfaces) to an external system.
    For some interfaces this external system needs a lot of time to return the http response back. Thus the waiting queues are generated on AE. From log files I see that there are five such queues. At the certain point (heavy traffic) all messages have to wait in these queues regardless their interfaces.
    To avoid that, I would like to have separated queues on AE based on interfaces:  Messages that belong to one interface would go into one queue, messages of another interface into another queue and so on.
    I am talking about AE, on IE I donu2019t expect waiting queues.
    I donu2019t want to use EOIO since I donu2019t want that the queue is stopped in case of an error.
    Could you please advice?
    Thanks, Janos

    Hi,
    in SXMB_ADM you can define filters and priorization for queues.
    Means, you can specify separated queues for specific interfaces.
    Cheers,
    André

  • Adapter Engine Message in Delivering Status

    Hi All,
    Any idea how to cancel/delete the messages which are in delivering status in Adapter Engine.
    In my case a single EOIO message is stuck in the AE with delivering status. Other messages are flowing successfully using the same cc.
    Earlier during such cases we had to restart j2ee/ stop/start AF Messaging to resolve the problem.
    Just wondering if theres any other solution?
    btw : The message was in delivering status because the password mentioned in the receiver channel was wrong. There were other messages which failed but the status of those messages went into "System Error". Nothing wrong with that, but just wondering why did a single message remain in the "Delivering" status.
    I have already been through this thread Re: How to delete message in "Delivering" status. Only exists in Adapter Engine and didnt find/understand anything which could help me.
    Thanks
    Sumit

    Look at these blogs,
    How to deal with stuck EOIO messages in the XI 3.0 Adapter Framework  :  How to deal with stuck EOIO messages in the XI 3.0 Adapter Framework
    XI :  How to Re-Process failed XI Messages Automatically
    Message stuck in Adapter Engine queue with status "Delivering"
    Hope this helps

  • TWO Adapter Engine (CA + IS) - How to delete one?

    Hi,
    In PI prod, I have an issue when PI has to send back an acknowledgment to ECC (when ECC send an idoc) (*). By looking queue log and reading SXMB_MONI trace, I identified that my problem is certainly with the link "IE -> Adapter Engine" and here's what we have:
    In PI prod:
      - in SXMB_ADM, category=RUNTIME + Parameter=IS_URL, I have: http://<host>/sap/xi/engine?type=entry   " no <port> !
      - in SXI_cache, I have TWO entries for Adapter cache:
         1. AE name = af.pip.pip-mssql
            AE type = CA
            AE URL  = http://<host>:<port>/MessagingSystem/receive/AFW/XI
         2. AE name = is.50.pip-sap
            AE type = IS
            AE URL  = http://<host>/sap/xi/engine?type=entry             " no <port> !
    And when PI has to send back the ack, it uses the 2 line of SXI_CACHE (e.g "IS"), and it's here that we have error (e.g HTTP_COMMUNICATION_FAILURE), whereas in PI quality, I have:
       - in SXMB_ADM, category=RUNTIME + Parameter=IS_URL, I have: http://<host>:<j2eeport>/sap/xi/engine?type=entry
       - in SXI_cache, I have one entry:
            AE name = af.piq.piq
            AE type = CA
            AE URL  = http://<host>:<j2eeport>/MessagingSystem/receive/AFW/XI
    To solve issue, my first idea is to provide <port> in "IS" url, and check the result... but why to keep two AE?
    The 2nd idea is to delete the 2nd entry (e.g "IS") in SXI_CACHE and/or update the appropriate "aii" properties.
    I have three questions:
    1. what's the best approach?
    2. where the 2nd entry of SXI_CACHE (e.g "IS") is maintained? which aii properties?
    3. do I have to stop/start PI server? if update IS_URL in SXMB_MONI, and/or if update the "aii" properties.
    As error appears in prod (only), please answer only if you are sure , because myself I have a doubt....
    And if you could refers to a help sap, snd, pdf links, I will appreciate.
    Thanks.
    Mickael
    PI 7.1 EhP1
    (*) I know that a quick solution should be to use prog IDX_NOALE in order to not send Ack... but I don't want that.

    option 2 should be a clean approach.
    ref: Re: Adapter engine URL different between CACHE and RWB adapter engine URL?

  • Delete records in status holding on Adapter Engine

    Hi all
    We are running on XI 3.0 and Netweaver 04 with SP20 installed
    I had a problem with a lot of message in status holding on Adapter Engine (develoment system)
    I'm not able to restart (resend) or delete this message. I had look around on SDN and in SAP notes, and only found a lot of old stuff, but nothing there can solve my problem
    This are a snapshoot of the error log
    Success Processing child message of multi-message with message ID 3aa40608-c251-4845-209c-d327ba444b7c
    Success Using connection JMS_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
    Success Message successfully put into the queue.
    Success The message was successfully retrieved from the receive queue.
    Success The message status set to HOLD.
    Success Admin action: Trying to redeliver message.
    Success The message status set to TBDL.
    Success The message was successfully retrieved from the receive queue.
    Success The message status set to HOLD.
    Success The message status set to TBDL.
    Success The message was successfully retrieved from the receive queue.
    Success The message status set to HOLD.
    Success Admin action: Trying to fail message.
    Error Admin action: Setting the message status to 'failed' failed, due to: java.lang.Exception: Predecessor not in final state.. Success Admin action: Trying to redeliver message.
    Success The message status set to TBDL.
    Success The message was successfully retrieved from the receive queue.
    Success The message status set to HOLDError Admin action: Setting the message status to 'failed' failed, due to: java.lang.Exception: Predecessor not in final state..
    Success Admin action: Trying to redeliver message.
    Success The message status set to TBDL.
    Success The message was successfully retrieved from the receive queue.
    Success The message status set to HOLD
    Kind regards
    Kim

    Hi,
    Change the combination in message monitoring, this time chose Ingegration Engine & Database combination and if you have messages in holding then try to cancel them but first find and delete the system error messages if any.
    If you get success here then change back the combination to Adapter Engine & Databse and then try to delete it again.
    I am sure that it is possible coz same problem was there with me and then after doing some R&D I was able to delete them.
    Regards,
    Sarvesh

  • How to delete / cancel messages in PI adapter engine

    Hello expert,
    we have a scenario File (EOIO) --> PI --> ABAP. Today the file we received is big (>100mb), apparently PI can't handle it, and we got error
    Transmitting the message to endpoint http://host:port/sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException:
    Error transmitting the message over HTTP. Reason: java.io.IOException: Error writing to server.
    seems like PI adapter engine got problem while delivering the huge message to ABAP integration engine. In RWB message monitoring, the message is set to Error. Unfortunately the file has been picked up many times, thus the huge message is stuck in adpater engine. In RWB message monitoring, I can see the message listed many times and status is HOLDING because the previous message can not be delivered to Intergration engine. I want to delete/cancel all the messages, I tried in RWB message monitoring to cancell the messages, however after cancelling one message, it crashed the PI system and cause a reboot.
    My question is; Is there some place in NWA (net weaver admin) to force all the messages to be deleted? (Because deleting/cancel in RWB message monitoring does not work because it causes system crash).
    Thanks
    Jayson

    Hi Team,
    I couldn't able to delete old message's from one of Q system, Persistence layer is 584 % filled, after triggering delete job(RSXMB_DELETE_MESSAGES) and Persistence layer has come to 384% and further I couldn't able to delete old messages.I executed program "
                                                                                                          RSXMB_CHECK_MSG_QUEUE" and manage  to delete few entries.Could you please suggest how to reduce fill level to below 100%
    Switch Procedure (for Persistence Tables) Deactivated
    Number of Table Entries                                                           
    3.185.992
    Maximum Number of Table Entries                                                   
    830.000
    Current Fill Level in %                                                           
    384
    Threshold value for fill level for executing a switch run in %                    
    60
    Number of Logically Deleted Table Entries                                         
    0
    Decline of Fill Level in % Following Deletion                                     
    384
    Delete or archive processed XML messages
    Job log overview for job:    SAP_BC_XMB_DELETE_001 / 06302000
    Date       Time     Message text                                                                               Message class Message no. Message
    13.03.2013 06:39:55 Job started                                                                                     00           516          S
    13.03.2013 06:39:55 Step 001 started (program RSXMB_DELETE_MESSAGES, variant &0000000000034, user ID SAPBATCH)      00           550          S
    13.03.2013 06:39:55 Value for parameters DELETION-RELATED_OBJECTS-ASYNC: 1                                        XMS_ADM        375          S
    13.03.2013 06:39:55 Value for parameters DELETION-RELATED_OBJECTS-ROWS: 100                                       XMS_ADM        375          S
    13.03.2013 06:39:55 Value for parameters DELETION-RELATED_OBJECTS-IDX5_DELAYED: 0                                 XMS_ADM        375          S
    13.03.2013 06:39:55 Value for parameters DELETION-ROWS_PER_LOOP-DELETE: 100                                       XMS_ADM        375          S
    13.03.2013 06:39:55 Value for parameters DELETION-PERSIST_DURATION-ASYNC: 007                                     XMS_ADM        375          S
    13.03.2013 06:39:55 Value for parameters DELETION-PERSIST_DURATION-SYNC: 007                                      XMS_ADM        375          S
    13.03.2013 06:39:55 Value for parameters DELETION-PERSIST_DURATION_ERROR-SYNC: 007                                XMS_ADM        375          S
    13.03.2013 06:39:55 Value for parameters DELETION-PERSIST_DURATION-IDX5: 007                                      XMS_ADM        375          S
    13.03.2013 06:39:55 Value for parameters DELETION-PERSIST_DURATION_UNIT-ASYNC: D                                  XMS_ADM        375          S
    13.03.2013 06:39:55 Value for parameters DELETION-PERSIST_DURATION_UNIT-SYNC: D                                   XMS_ADM        375          S
    13.03.2013 06:39:55 Value for parameters DELETION-PERSIST_DURATION_ERROR_UNIT-SYNC: D                             XMS_ADM        375          S
    13.03.2013 06:39:55 Value for parameters DELETION-PERSIST_DURATION_UNIT-IDX5: D                                   XMS_ADM        375          S
    13.03.2013 07:27:58 0 XML messages deleted                                                                        XMS_ADM        351          I
    13.03.2013 07:27:59 Step 002 started (program RSXMB_TABLE_SWITCH, variant &0000000000034, user ID SAPBATCH)         00           550          S
    13.03.2013 07:28:00 Job finished                                                                                    00           517          S

  • Delay of Message in the Adapter Engine when put into queue

    Hi XI/PI Experts,
    We are having problems in the Adapter Engine wherein messages are staying longer in the AE queue as usual.  Sometimes, it stays longer in Delivering status also.  Is there any way we can monitor and try to push the message out of AE to avoid delays?  I know we can do this in the ABAP side (Integration Engine)...but how can we do this in the Adapter Engine?
    See below sample logs in AE RWB:
    2008-07-17 13:28:13 Success Using connection SOAP*****. Trying to put the message into the receive queue.
    2008-07-17 13:28:13 Success Message successfully put into the queue.
    2008-07-17 13:34:12 Success The message was successfully retrieved from the receive queue.
    2008-07-17 13:34:12 Success The message status set to DLNG.
    As you can see there is a gap of 4 minutes.
    Hope you can help me.  Thank you so much in advance.
    Grace

    Hi.
    Thanks for your answers but the messages are not set into EOIO but just EO.  So the messages are not ending up in Holding Status. 
    I also believe that issue is not occurring because of too many messages in error in AE nor because of the receiving system is down.  Issue is happening when message is about to be sent to the SOAP communication channel in AE.  As you can see in the sample log I provided above, in RWB AE, after the message was put into queue, it took several minutes to be delivered to corresponding comm channel.  My questions are:
    1.  Is there a way we can monitor the queue in AE like the way we monitor the queue in IE? (e.g. smq1 and smq2 transactions) .
    2.  If there is a way, how are we going to intervene manually on the queues in AE?  (we can intervene with smq1 and smq2 in IE)
    3.  For messages with Delivering Status in AE, sometimes it is taking hours to move to "Successful/Delivered" Status.  Is there a way we can intervene with that?  I believe we can resend messages with "System Error" Status and Staus "To be Delivered" but for status "Delivering"...it is not possible (from what I know -- I hope there is a way).
    I look forward to hearing from you guys/gals.
    Grace

  • Error JOB MS.JOB.DELETE in Adapter Engine SAP XI 7.0

    Hello,
    I am getting an error in JOB that deletes messages from the adapter engine of SAP XI 7.0, can someone help me?
    Adapter Engine, message: Fatal DeleteJob (Default Delete Job) failed.(Details: Code: MS.JOB.DELETE, Location: com.sap.aii.af.ra.ms.impl.core.archiving.executor.DeleteExecutor, Reason: com.sap.aii.af.ra.ms.api.DeliveryException: Error removing messages or audit log entries with expired persist duration., Time: 14.08.2008 21:00:05)
    Thanks
    Zanchetta

    Hi Roberto,
    We have noticed this behavior after our PI system is upgraded to PI 7.0 Ehp1.
    It is caused by JDBC driver after upgrade. This issue is resolved in the following new jdbc driver which is available on the SAP Service Marketplace:
    DB2 Driver for ODBC and CLI V9.7 FP3a SB27297.
    Hope your issue will be resolved by this fix. If it's not resolved, please open up a message with SAP.
    Thanks,
    Siva Kumar

  • Adapter Engine delay reading Queue

    Hello,
    Can anyone help me with the following:
    Since a day or two we have been experiencing delays in message processing in the adapter engine. The delay is always in the same step when looking at a message via MDT:
    2007-05-21 14:30:25 Success Message successfully put into the queue.
    2007-05-21 15:33:33 Success The message was successfully retrieved from the receive queue.
    Here there is a one hour gap for a step that normally takes only 1 second. The delay appears and disappears without intervention. On friday there was a delay of 45 minutes and yesterday it was one hour (always at the end of the afternoon).
    Which queues does this regard? Are these the queues shown via this link? http://<server>:<port>/MessagingSystem/monitor/systemStatus.jsp
    Sander

    I think below SP19 (or is it 20) the file adapter and jdbc adapter share one of those four queues if same direction and same asynch/synch type.  Pretty sure they split in 19 or 20.
    You can increase max threads on the queues.  It's in visual admin, but I can't remember exact parm at the moment (one is 'max consumers', or something similar).
    We ended up creating a de-central AE to move high volume/low priority messages separate from low volume/high priority messages.  It's was just our way of dealing with our mix of messages.

  • Cancelling/Deleting messages in the adapter engine

    Hi Everyone:
    How can I cancel or delete a message in status 'system error' in my adapter engine.
    I do not want this message will be resent by mistake when the receiver comm chanel will be active.
    Thanks a lot guys.

    Alvaro,
    If the message is successfully processed then you cannot delete. If your message is in waiting or etc. then go through this weblog for much information:
    /people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
    Hope this helps you...
    ---Satish

  • Seeing old deleted comm. channels on Non-Central Adapter Engines

    hello,
    We have a landscape of PI 7.0 machine connected with 3 Non-Central Adapter Engines installed on another machine, which generally works fine.
    Somehow, after doing a lot of changes in the integration directory (creating and deleting object: scenario, comm. channels and ect...)  -  two of the non-central AE shows comm. channels which were already deleted (and activated ofcourse) in the integration directory.
    What i tried already:
    run CPACache in mode=full on each of those AE, clear SLD cache and even restarted those J2EE instances. but it didn't work out. the thing that is also weird is that I can start/stop those old comm. channels. how do we get rid of those old channels?
    I would appreciate any suggestions .

    Problem is solved.
    In integration directory we could not see the old comm. channels under the objects tab or under any scenario, but they existed as shown in RWB.
    From CPA cache we picked up the comm. channels object IDs and search for it in integration directory UI, once they were found - it was easy to actually delete them.
    What went wrong?
    These old comm. channels were assigned under deleted services which were under deleted parties. For some unknown reason, after deleting the services and parties successfully, the comm. channels underneath were not deleted and could not shown in any of objects tab GUI tree's nodes.
    We could not reproduce this behaviour.

Maybe you are looking for

  • Xcelsius 2008 Dashbord not working

    Hi, We have BI Dashboards integrated to CRM portal via OpenDocs and using flash variables in Dashboard designer. Current version details are: BO XI 3.1 SP6 (earlier version was BO XI 3.1 SP3), and Xcelsius 2008 build on top of QAAWS>BO Universe>BEx q

  • Hotfix available now for Creator 2 and Creator 2 Update 1

    Have you accessed the AutoUpdate Center lately? Check out the latest hotfixes for both Java Studio Creator 2 and Update 1. Open the IDE, connect to the Internet and visit the Update Center to download the available modules. For Update Center instruct

  • Is it poss to capture a recorded meeting?

    We have Connect v6, and for promo purposes we'd like to put a short clip from a recorded meeting into a PowerPoint presentation which will be running autonomously. I can't see a way to download the recorded meeting (which I presume is a Flash video f

  • What's with the instability?

    Wow, what a bummer this is! I got away from iMovie mostly because of it's instability. I thought sure FCPX would be more stable, but this 10.0.7 either locks up my computer so I have to do a force shutdown, or it Quits while I'm viewing the import wi

  • How do i install and boot to DOS in NTFS format?

    Hi every body. I have a PC setup winxp on the first partition,formatted NTFS,i setup DOS 7 on the next partition formatted FAT32,but i dont know how to add this partition to the boot choice so that when the PC boot up,there are 2 choices for me: 1.Wi