Error JOB MS.JOB.DELETE in Adapter Engine SAP XI 7.0
Hello,
I am getting an error in JOB that deletes messages from the adapter engine of SAP XI 7.0, can someone help me?
Adapter Engine, message: Fatal DeleteJob (Default Delete Job) failed.(Details: Code: MS.JOB.DELETE, Location: com.sap.aii.af.ra.ms.impl.core.archiving.executor.DeleteExecutor, Reason: com.sap.aii.af.ra.ms.api.DeliveryException: Error removing messages or audit log entries with expired persist duration., Time: 14.08.2008 21:00:05)
Thanks
Zanchetta
Hi Roberto,
We have noticed this behavior after our PI system is upgraded to PI 7.0 Ehp1.
It is caused by JDBC driver after upgrade. This issue is resolved in the following new jdbc driver which is available on the SAP Service Marketplace:
DB2 Driver for ODBC and CLI V9.7 FP3a SB27297.
Hope your issue will be resolved by this fix. If it's not resolved, please open up a message with SAP.
Thanks,
Siva Kumar
Similar Messages
-
Error in gettnig logon data for Adapter Engine
Hi,
We have Http > XI > RFC Scenario. We are getting 401 unauthorized error in "CALL ADAPTER" section. From the trace its clear that the logon data for the adapter engine (there is no value for USER in trace) is not getting poulated. We fixed this issue last evening....i think by doing full cache refresh, but this problem propped up again today. Yesterday when this issue was fixed the USER has "PIISUSER" in the trace.
We haven't changed any config settings since yesterday so all the passwords and other config info is same. Not sure what's causing this issue. Below is the trace. Any help will be highly appreciated.
- <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="3" type="T">Channel for adapter engine: RFC</Trace>
- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP">
<Trace level="2" type="T">return fresh values from cache</Trace>
<Trace level="2" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET): af.ppi.dac-sapd1</Trace>
<Trace level="3" type="T">URL = http://dac-sapd1.actv2.com:8007/MessagingSystem/receive/AFW/XI</Trace>
<Trace level="3" type="T">User =</Trace>
<Trace level="3" type="T">Cached = X</Trace>
<Trace level="3" type="T">Creating HTTP-client</Trace>
<Trace level="3" type="T">HTTP-client: creation finished</Trace>
<Trace level="3" type="T">Security: Basic authentication</Trace>
<Trace level="3" type="T">Serializing message object...</Trace>
<Trace level="3" type="System_Error">HTTP-client: error response= <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <html> <head> <title>Error Report</title> <style> td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;} A:link A:visited A:active </style> </head> <body marginwidth="0" marginheight="0" leftmargin="0" topmargin="0" rightmargin="0"> <table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75"> <tr bgcolor="#FFFFFF"> <td align="left" colspan="2" height="48"><font face="Arial, Verdana, Helvetica" size="4" color="#666666"><b> 401   Unauthorized</b></font></td> </tr> <tr bgcolor="#3F73A3"> <td height="23" width="84"><img width=1 height=1 border=0 alt=""></td> <td height="23"><img width=1 height=1 border=0 alt=""></td> <td align="right" height="23"><font face="Arial, Verdana, Helvetica" size="2" color="#FFFFFF"><b>SAP J2EE Engine/7.00 </b></font></td> </tr> <tr bgcolor="#9DCDFD"> <td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></td> </tr> </table> <br><br><br><br><br><br> <table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75"> <tr bgcolor="#FFFFFF"> <td align="left" colspan="2" height="48"><font face="Arial, Verdana, Helvetica" size="3" color="#000000"><b> Authentication did not succeed.</b></font></td> </tr> <tr bgcolor="#FFFFFF"> <td align="left" valign="top" height="48"><font face="Arial, Verdana, Helvetica" size="2" color="#000000"><b> Details:</b></font></td> <td align="left" valign="top" height="48"><font face="Arial, Verdana, Helvetica" size="3" color="#000000"><pre> No details available</pre></font></td> </tr> </body> </html></Trace>
<Trace level="3" type="T">HTTP-client: closing...</Trace>
<Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
<Trace level="3" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
<Trace level="3" type="T">HTTP-client: response received</Trace>
<Trace level="3" type="T">HTTP-client: checking status code...</Trace>
<Trace level="3" type="T">HTTP-client: status code = 401</Trace>Hi,
go to the exchange profile.
there u need to maintain the password for the XIISUSER.
I think u need to restart the J2EE Engine for the changes to take effect.
Regards
Cornelius -
Error : Unable to find URL for Adapter Engine
Hi Experts,
I have searched several forums , but i am not clear on how to resolve this error.
I am using XI 3.0, my scenario is File->XI->File
I am getting this error in SXMB_MONI.
*Can any body suggest me a clear step-by-step procedure to solve it.*
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Message canceled
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.xd2.host-dev</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>no_messaging_url_found: Unable to find URL for Adapter Engine af.xd2.host-dev</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.xd2.hydrus-dev</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks
saiHi Debashish,
Thanks for ur reply,
I have executed
--->Execute SAI_AE_DETAILS_GET from se37
>Enter AE name:<host>.<systemid>
After executing, i got these param
Exception NO_ADAPTER_ENGINE_FOUND
Message ID: SAI_GLOBAL Message number: 016
Message:
no_adapter_engine_found: Unable to find Adapter Engine host-DEV.XD2
Exchange profile parameters are like this
Calling function EXCHANGE_PROFILE_GET_PARAMETER
Retrieving data from the XI Profile...
Function call terminated sucessfully
Retrieved value of
section = Connections
parameter = com.sap.aii.ib.server.connect.webas.r3.ashost
-> value =
and i dont have authorizations for SU01 fro lock/unlock.
Any suggestions how to proceed.
Thanks
Sai -
RFC Error during call from IBM WebSphere adapter to SAP R/3
We recently saw an issue arise on on one of our RFC interfaces. We dropped 15 messages onto the request queue of the BAPI adapter, 11 processed successfully, and 4 failed with the following statement:
[Thread: EAI.SAP_BAPIJmsThreadPool.thread5 (#1670071)] [Type: Error] [MsgID: 27064] [Mesg: Error: Function module Z_BAPI_ZPTRAC_UPDATE could not be found. Check the SAP system or the business object ASI.]
I replayed the 4 in question and they processed successfuly. I then dropped them on the request queue in our VAL environment and had 2 failures. I replayed the same 15 a second and third time and all 15 were successful in those cases.
Has anyone seen this before? We are configured to allow 1 concurrent connection and to log into the db server directly.
Thanks.So we tested some things that are described in the SDN or by SAP with Connectors.
We tested JCO version 2.0.12, 2.1.18 and 3.0 in J2EE Projects in netweaver and in Eclipse (Standalone).
For version 2.0.12 there is a failure that this version is not compatible with the other things in netweaver.
This version is for standalone and integrated sytems.
For version 2.1.18 is only described as standalone and so failure happened in netweaver that other classes are coruppted or missed. The internal test in "content administrator" (Ping and Test) do not work and had the same error.
For version 3.0 (that displace the other two versions) there is many to do in settings and coding that we do not have tested yet because project is not that small to write it for JCO 3.0 only for testing. When we only displaced files in netweaver the server do not start any more.
So:
Is there a way to call R/3 from session bean and 1. create an JCO client or 2. add a client to the "standard" pool of netweaver to use it?
Any ideas? help? links?
Project have to be complete in september...
Our combi is SAP Netweaver 2004 SP21 on Windows XP SP2 / Server 2003 Standard SP1 with JVM 1.4.2_16... need of any more info?
thx -
Error in Adapter engine in RWB
Hi,
I'm facing 2 type of issues in RWB,
Issue 1) Adapter Engine is in Red State in Component monitoring,
Error: Details for 'Is the Adapter Engine Running?'
Response from Adapter Engine: Fatal ArchiveJob (Archiving) failed.(Details: Code: MS.JOB.ARCHIVE; Location: com.sap.engine.messaging.impl.core.job.executor.ArchiveExecutor; Reason: java.io.IOException: The HTTP request of command "MODIFYPATH" did not reach the XMLDAS. This may indicate that the credentials for the HTTP destination have expired.; Time: 31.03.2011 00:00:05)Response from Adapter Engine: Fatal ArchiveJob (Archiving) failed.
2) If I click, any one of the option like Communication Channel monitoring, Engine Status etc, I'm getting the error
"Internet Explorer cannot display the webpage"
It seems to be the URL to open these component(Communication Channel monitoring, Engine Status etc ) is wrong. Fromwhere the URL address is taken? Where we need check the host name??
I searched in sdn, but could not find any related topics.
Kindly help me resolve this issue ASAP.
Thanks & Regards,
Baskaran KHi Baskaran,
For 1), did you check if the XML DAS communication user (used in destination "DASdefault") is configured correctly according to the documentation http://help.sap.com/saphelp_nwpi71/helpdata/EN/43/68fac39a363d33e10000000a11466f/frameset.htm and is assigned to the "XMLDASSecurityRole" role?
And check if you have configured the rules for your Archiving job (Component Monitoring -> Adapter Engine XIE -> Background Processing).
It seems the archiving does not work because of configuration issues.
An archiving job without rules means: all messages are relevant for archiving. The delete job will only delete messages which are not relevant for archiving. So it does not do anything in this system. It can lead to the database table keeps growing, if it's the case too.
You should check the archiving configuration so that the archiving job runs successfully.
If you do not want to archive the messages, please deactivate the archiving job. Then the delete job should clean the old messages with the next execution.
You may delete it straightly on the Background Processing.
For the 2), "Internet Explorer cannot display the webpage", try using the compatibility mode of your browser.
Regards,
Caio Cagnani -
Error resending messages with system-error in Adapter Engine
Hi all,
We got an error when trying to resend all messages in error in runtime workbench, message monitoring, adapter engine, database (overview), clicking on a sender service with messages in error state, and clicking on "repeat" button to resend those in error messages. The error is "No authorization to execute action for component Adapter Engine XP0". The user We are using to perform this task is associated to all groups available in CUA... some of you has any tips about how to perform this operation?
regards.
robertiI really don't remember what solved this problem, but it is solved. Now the functionality works as it should.
Regards.
Waldemar Roberti -
Error while reading access data (URL, user,password) for the Adapter Engine
Hi,
Any idea on below message? I am doing file to file scenario and got the below tarce from sxmb_moni.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.pi1.piserver1</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>no_messaging_url_found: Unable to find URL for Adapter Engine af.pi1.piserver1</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine af.pi1.piserver1</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks
BalajiIt looks like the adapter engine is not able to register him self on SLD, you have to check in the SLD the "Exchange Infrastructure" domain, you have to verify restarting the J2EE the adapter engine update the entries in the SLD related to the specific XI Domain.
Launch Visual Administrator >> Server >> Services >> SAP AF CPA Cache
Enter the appropriate values for:
SLD.selfregistration.hostname (Use fully qualified hostname)
SLD.selfregistration.httpPort
SLD.selfregistration.httpsPort
Sandro -
Error : no_adapter_engine_found: Unable to find Adapter Engine
Hi All:
I applied SP 20 in XI 3.0 (from SP9), but when I test the File to File scenario I am getting an Error : *no_adapter_engine_found: Unable to find Adapter Engine* in SXMB_MONI.
Here it the complete Error log
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
<!-- Call Adapter
-->
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>no_adapter_engine_found: Unable to find Adapter Engine</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can any one help me, so I can resolve this ASAP?
Thanks
Farooq.Hi ,
I got the same error in my scenario and i solved the same.Actually i ma not pretty surte this will solve your problem.
In my case proxy generation settings was mis configured in the sender system. so its caused the problem
I made an entry in the SPROXSET table and i did other activities like RFC and application system also.
Then its worked for me. Its not matching with your case please do ignore this one
Regards
Vijay -
Error: Unable to find any Adapter Engines
Hi all,
I am trying to execute a very simple scenario.
A xml-file is read from a drive by the XI system.
XI reads the values.
Another xml-file containing some parts of this info is written to another location.
I see that the file is read and removed.
However, when I check the monitoring I find follwing error message:
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.cx1.cernum05\cx1</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>Exception in SLD client: AbapSLDRequestHandler.exe: Unable to find any Adapter Engines</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.cx1.cernum05\cx1</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Is there some configuration missing?
We are running XI3.0 SP9.
Thanks in advance.
Kind regardsHi Geert,
My first guess is that something is not configured correctly. Try checking if your adapter engine is registered in the SLD:
In a browser, goto http://host:port/sld. Choose Technical Landscape. Under Technical System Type, select Exchange Infrastructure. You should have an entry like:
"Adapter Engine on cx1.cernum05"
If not, check the settings in Visual Administrator for the SLD Provider service and test the update from here.
Also check your receiver communication channel. Under Adapter Engine, it should say "Integration Server". If it says e.g. af.cx1.cernum05, your SLD has not been updated correctly.
Regards,
Thorsten -
Messages in multi-message format can only be sent to one Adapter Engine
Hi,
Using XI 7.0 SPS 12 I have a scenario Single Flat File->XI->Multiple Messages to ECC.
Due to an annoying limitation/bug in ECC we have to send workorders in to be processed as individual transactions. This means generating seperate calls to ECC from PI.
I've adjusted my message map (No BPM) to split the source messages out, but when it calls the XI adapter to send them to ECC I get the following:
<!-- Technical Routing -->
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30"
xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"
SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_MMF_ENGINETYPE</SAP:Code>
<SAP:P1/>
<SAP:P2/>
<SAP:P3/>
<SAP:P4/>
<SAP:AdditionalText/>
<SAP:ApplicationFaultMessage namespace=""/>
<SAP:Stack>
Messages in multi-message format can only be sent to one Adapter Engine
</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I am generating multiple structures under
messages/message1/xx_my_structure_repeated_at_this_level
which gives the correct amount of payloads in moni.
I believe this error is because the http/idoc adapters dont go through the AE and it is the AE that splits the multiple messages into individual calls. Is there a clean workaround which doesnt involve BPM or intermediate writing to disk etc?
Thanks
James.
Points awarded where appropriate.<i>I believe this error is because the http/idoc adapters dont go through the AE and it is the AE that splits the multiple messages into individual calls.</i>
Perfectly correct
<i>Is there a clean workaround which doesnt involve BPM or intermediate writing to disk etc?</i>
May be writin a module.
Otherwise to avoid other development time, go for BPM.
Regards,
Prateek -
Hello All,
In SXMB_MONI i got an error saying
SAP:AdditionalText>Error while writing to secure store: ERROR_UNKNOWN: Error when updating buffer for Adapter Engine</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine</SAP:Stack>
My Analysis :
1, In SXI_CACHE i could see 'Unable to refresh cache contents' and 'Error during last attempt to refresh cache' also I could not see any entry in Adapter Engine Connection Data Cache.
2, when execute the RFC connection 'INTEGRATION_DIRECTORY_HMI' Its asking for userId and password .
3, I tried reset the password and do a JAVA restart again with same error.
Clarificaiton need :
1 Looks some authorization error , but where exactly to maintain this ,
2, How the adatper engince connection data will populate in to sxi_cache transaction.
could you guide me clearly for this issue.
Regards.
Sethu.Thanks venkat,
now that Adaper engine url gotregistered , but no my cache content is not updating correctly , i.e when i execute the any cache refresh its loading for a long time and ending up an error and when i tried in Administator tool--> cache overivew > ID> and did cache refresh its end up with error.
Method fault! Message : IBaseException:Connection to system DIRECTORY using application DIRECTORY lost. Detailed information: Error accessing "http://c1bfxr41.unix.marksandspencercate.com:8136/dir/hmi_cache_refresh_service/int?container=any" with user "PIISUSER". Response code is 401, response message is "Unauthorized" com.sap.aii.ib.server.abapcache.CacheRefreshException: Connection to system DIRECTORY using application DIRECTORY lost. Detailed information: Error accessing "http://c1bfxr41.unix.marksandspencercate.com:8136/dir/hmi_cache_refresh_service/int?container=any" with user "PIISUSER". Response code is 401, response message is "Unauthorized" at com.sap.aii.ibrun.server.valueMapping.cache.RefreshClient.refresh_VMCache(RefreshClient.java:60) at com.sap.aii.ibrun.server.valueMapping.cache.HmiMethod_Invalidate.refresh(HmiMethod_Invalidate.java:79) at com.sap.aii.ibrun.server.valueMapping.cache.HmiMethod_Invalidate.process(HmiMethod_Invalidate.java:40) at com.sap.aii.utilxi.hmis.server.HmisServiceImpl.invokeMethod(HmisServiceImpl.java:169) at
But in sm59 INTEGRATION_DIRECTORY_HMI - i used pisuper user id also in SLDAPICUST i used pisuper only, i dont know where the piisuser is getting conflict. any idea please? -
Adapter engine URL different between CACHE and RWB adapter engine URL?
Hi there,
If I go to SXI_CACHE and go to the adapter engine runtime cache I get a URL of:
https://<server>/MessagingSystem/receive/AFW/XI
NOTE: The above URL is HTTPS.....and there is no port in the above....
However, if I go to the runtime workbench and click on the adapter engine and click on "test message", I get the following URL:
http://<server>:<port>/MessagingSystem/receive/AFW/XI
NOTE: The above url is HTTP and there is a port.
How can I get these URL's back in sync?
I want them both to be HTTP.
Any ideas?
ThanksHello
1) Check the value of the Exchange Profile parameter 'com.sap.aii.connect.secure_connections'. If you don't wish to use HTTPS this should not have any value set.
2) Delete the Adapter Engine cache in trx sxi_cache -> Goto -> Adapter Engine Cache -> Delete Cache Contents (trash can icon).
The AE cache will be populated the next time a message is sent through the system. Check the value after this is done.
Regards
Mark -
Unable to find URL for Adapter Engine af.xid.xidev ?
Hi,
I have scenario.
Abap proxy -
> ccBPM -
> RFC (synchronous).
The error happen for ccBPM -
> RFC
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>2: Unable to find URL for Adapter Engine af.xid.xidev</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Any idea for what happening ?
Cheers
FernandHi.
Have you tried with this
Re: Wrong Adapter Engine on RWB?
Regards
Seshagiri -
Hello Guys!
I'm having the following error in the RWB, > Component monitoring > Adapter Engine ..> Result of self-test
Internal error: system status for cluster nodes 477459051 not available
can you send me help about this Error?
Thanks in advance.
Notes: We are using the Netweaver 7.1
Edited by: ecruz2010 on Oct 12, 2011 3:44 PM
Edited by: ecruz2010 on Oct 12, 2011 3:45 PMHello,
If you go to the NWA: Operations Management > Systems > Start&Stop > Instances
you can check there the Instance status
Sarah -
1636215 - Performance monitoring for the Advanced Adapter Engine
Hi ALL,
How can we monitor the performance by changing the parameter to true in the above note please please help me
Thanks,
RajHi Dheeraj,
Since you've gone through the note, I'm assuming you know how to activate the performance monitoring for adapter engine.
However, there are reservations against doing it in any system Dev/Quality/Production. Reason being, it becomes performance/load intensive when the perf. monitoring is on.
Still, you can diagnose bottlenecks and execution trends in Dev/Quality using performance monitoring as suggested in the note but be aware that your box is coping well with it. Please note, once activated, you don't have to do anything else. System will automatically collect performance data and you will be able to browse through it using the performance monitoring link.
How to use it???
You see a performance monitoring link in Monitoring Home (navigate via Configuration and Monitoring home from PI/PO homepage).
It will help you analyze the flow of message on periodical basis (hourly/daily etc) and will give you more stats on number of messages in that time duration, average time taken, message sizes (min, max and avg), interface-by-interface detail of runtime consumption at every stage etc.
Please go through standard SAP help for more clarity:
Monitoring Performance - Advanced Adapter Engine - SAP Library
Apart from this, there is this great blog by Suseelan around monitoring:
http://scn.sap.com/docs/DOC-35805
Hope this helps.
Regards,
Abhishek
Maybe you are looking for
-
In Design CS2 won't accept serial number during "Personalization" In Design
Re: InDesignCS2 rejects the serial number provided for CS2 special "no-activation" versions. I am having an identical set of issues as outlined in the above discussion but I am using Windows 7. My hard disk died and I am simply trying to get back up
-
I would like to inquire about how I could have my iPad 2 repaired or replaced. I bought it With a credit card via apple store website last June 19 of this year. At first, I already noticed a little white spot in the middle of the screen visible when
-
In our shop, we're currently in the planning stages of moving a C++/VB application to the Web, using Java. My boss seems to favor a pure "Servlet" approach to the User Interface (i.e., all HTML will be rendered using Servlets). I strongly believe in
-
Hi, I have created a Infoset between ODS and Infoobject, with Characteristics A, B, C and the key Figures E, F,G. A, E,F,G are from ODS. B,C are from the Master data carrying Infoobject. A is the common characteristic in both the ODS and the Infoobj
-
Can´t find the table where the effectivity of contract lines is stored
Hallo all, I need to build a sql-query on the Service Contracts Authoring Form (OKSAUDET) where I include the table(s) in which the information about the effectivity-sub-lines in the pricing tab of the lines tab is stored. But I just found the table