Deleting Source System

Dear friends,
I have some doubts, i was delete one source system to create a new in same system,
when try to create the new same data and objctes there are, what can i do to create a new soure system in the same system but without old objects ( cubos, dso's etc ) ??? i want to retransport all objects again.
Thanks in advance.
Fabrício

Once you delete the source system, the objects which are related to that would be deleted.
you have to re-create it or transport it to the source system.
in RSA1, you have a option to create your source system. Before that, you have to check whether the logical system, RFC connection for the source system are created or not?
Hope this would help you.

Similar Messages

Unable to delete Source System in 3.5

Hi Friends,
desperately trying to delete Source System, BW provides this error:
Deleting source system E14_M007 failed -> Check log !
Message no. RSAR620
log:
Objects can only be displayed (change protected)
Message no. RSAR771
System is open , no dea how to proceed.... please HELP
Regards
Joe
Edited by: J.F.B. on Jan 14, 2011 2:49 PM

Hi Colum,
Many tjanks, that is exactly I was looking for. If you should ever stay in my region visit me for some beers
Regards
Joe
Hi Joe,
Good stuff, glad it worked for you!
Rgds,
Colum
Edited by: Colum Cronin on Jan 18, 2011 12:13 PM

Error deleting source system with error message: "incorrect input for....."

Hi,
I'm trying to delete the source system using tcode RSA1 => Source systems => select the 'source system' and delete, but I got an error message as follows:
"incorrect input for activating transported shadow IPacks"
Fyi, I have opened up the client configuration (SCC4) prior to delete this source system but the source system still cannot be deleted and I receive the above error message.
Please let me know what is the caused of the error and how to solve the problem.
Thanks for your kind help.
Regards,
Mark

Hi Mark,
Which version of BW are you in?
check this thread and also the note 709581
Error Deleting Source system connection
Thanks,
Raj

Delete Source System Assignment for a DataMart Infosource in BW3.0B

Hello Experts:
Can one of you assist me with how to delete source system assignment for a system generated infosource(ie., Infosource existing under data Mart). i noticed that in case of an Info Cube, system provides an option to delete the source system assignment but not for an ODS.
I am trying to delete the system data source 8* that has been assigned to the data mart info source 8* and reassign the data source to my custom info source.
Any ideas would be highly appreciated.
BTW, we are on BW3.0B
Thanks,
Ragavan

Hi,
Go into the infosource with change mode. Open the transfer Rule/transfer structure and hit the delete button. It'll ask for delete datasource assignment. That would delete the source system assignment.
Cheers,
Kedar

What is delete Source system assignment???

Hello All,
If we go inside Infosource in Source system and then right click there. One option there is " Delete Source System assignment" .
If we chosse this option then what will happen? Can i reassign infosource to new souce system after chosing this??
Thanks for reply

Hi,
Yes, this deltes the sync between source sytem(DATA SOURCE) to bi.(INFOSOURCE)
and you can get connected to another source system, but this may lead to problems. so make sure before delte the sourcesys asigment and going for new one.
Edited by: Aduri on Dec 26, 2007 10:08 AM

Delete source system fails

I've got a flat file source system definition which I deleted via rsa1 --> source system --> right-click --> delete. it deleted all the dependant objects (transfer rules, psa, EDI config, etc), but the system still shows up in RSA1. There's an entry in table RSBASIDOC referencing this source system (field SLOGSYS), because we manually tried creating a basic idoc type for it (which we now can't delete with tcode WE20 since it's been generated).
Does anyone know off hand how to get rid of the source system in the RSA1 list?
Thanks!
Rich

Hi Rich -
I guess the SAP Note (967999) applies in your case. I've pasted it below for your reference.
Symptom
In the source system tree of the Administrator Workbench (AWB), you use the 'Delete' function in the context menu (right mouse button) for a connected source system.
Even though the system displays success message RSAR 262:
Source system & deleted
at the end in the status line, the source system connection is visible again after the AWB has been updated and the source system connection has not been deleted.
Other terms
Context menu, source system tree, right mouse button, delete source system, RSAR, 262, 620, SLG1, RSAR262, RSAR620, AdminWorkbench
Reason and Prerequisites
This problem is caused by a program error.
An error occurs during the deletion, however the system does not inform you correctly of this at the end, after the deletion process has terminated.
Solution
BW 3.0B
Import Support Package 33 for 3.0B (BW 3.0B Patch 33 or SAPKW30B33) into your BW system. The Support Package is available onceNote 914950 "SAPBWNews BW 3.0B Support Package 33", which describes this Support Package in more detail, has been released for customers.
BW 3.10 Content
Import Support Package 27 for 3.10 (BW 3.10 Patch 27 or SAPKW31027) into your BW system. The Support Package is available onceNote 935963 "SAPBWNews BW 3.1 Content Support Package 27", which describes this Support Package in more detail, has been released for customers.
BW 3.50
Import Support Package 19 for 3.5 (BW3.50 Patch 19 or SAPKW35019) into your BW system. The Support Package is available once Note 928662 "SAPBWNews BW Support Package19 NetWeaver'04 Stack 19", which describes this Support Package in more detail, has been released for customers.
BW 7.0
Import Support Package 10 for 7.0 (BW7.0 Patch10 or SAPKW70010) into your BW system. The Support Package is available once Note 914304 "SAPBWNews BW 7.0 Support Package 10", which describes this Support Package in more detail, has been released for customers.
To provide information in advance, the note(s) mentioned above may already be available before the Support Package(s) is/are released. In this case, the short text of the note still contains the words "Preliminary version".
Pls assign points if helpful.

DELETE SOURCE SYSTEM FORCEFULLY

Hi Experts,
I am working on BW 3.5 had a r/3 source system which has been formatted recently now when i am trying to delete this source system (while going traough RSA1->source system right click delete) it says "deleting source system failed".i ckecked through t.code sm21 "source system BIWDEV not known.i have also tried to delete it through FM RSAP_BIW_DISCONNECT and RSAR_LOGICAL_SYSTEM_DELTE but nothing is working.There is entry of this source system in RSBASIDOC table.Please help.
Sanjeev

Hi,
try deleting first this pertner profiles with tcode WE20 and then delete the source system....
if this system is not up anymore then delete the part profiles, and the RFC connection
caution; you'll loose all TRules connected to this source system...
hope this helps...
Olivier.

Delete source systems...

Hello,
When I delete a source system in RSA1 (not used, not existing in SM59) and then refresh the list, the deleted system pops up again. Why is this? How can I fix it? Must I delete the entry directly in source table? Which table contains the source systems?
BR,
F C

Hello,
I have checked all tables and deleted the entries where they existed. However, the problem still persists...! There is no error message when deleting source systems (in RSA1) and at first they disappear. But on refresh, they appear again... Strange...
BR,
F C

Tcode for deleting source systems

Dear all,
is there any tcode for deleting source systems in BI 7.0? I tried RSAP_BIW_DISCONNECT and RSAR_LOGICAL_SYSTEM_DELETE, but these two didn't exist in BI 7.0. Please help. Thanks.
Jin Ming

hi,
chk the below link
How to delete source systems?
Ramesh

How to delete Source system

Dear All,
I have created Logical system and assigned it to client. After that when you go to RSA1 , system automatically creates Source System of BIW .
Now I want to use the different logical system for that I want to delete this automatically created BIW self source system which I am not able to do becuase in Context Menu Delete option is not Visible.
Please guide me immediateley.
regards
Vishal

Hi Vishal,
Refer these posts. Probably they help you!!
Re: How to delete a source system in BW?
Re: Source system deletion
Bye
Dinesh

Error Deleting Source system connection

hi
I was trying to delete a source system from BIW. ( Wanted to start afresh).
But while doing that I get this error:
"Incorrect input for activating transported shadow ipacks"
Can someone tell me how to correct this information.

Hi Murali,
this problem has been fixed with SP20, BW 3.0B. Please see SAP Note 709581 for details.
Regards, Klaus

How to delete source system (popup window)

Hi All,
I want to delete the source system
RSA1 - Source Systems - system and Delete
but for every using "Transfer structure" i receive the popup information window and i have to confirm this window. It takes much time.
Do you know anybody the another solution ?
Thanks in advance for advice
Martin

Martin,
That is the only way. It would ask you to put it in transports and larger the objects longer it takes. There is no other way as far as I know.
Thanks
Shabna

How to delete source system in BI system

Dear Experts ,
recently we finished client copy in BI production system to quality system,
now we are facing problem with source system connections in bI system
in RSA1 APO production system's source system is comes to BI quality system now i need to delete that APO source system in BI quality system ..please let me the process how can i delete source in BI quality
can i delete it as below
log in into BI quality system --> RSA1 --> select source system which i need to deletse --> right click & delete
or we have any other process to delete it.
Regards

Hi Swathimatta,
Apart from the two ways to delete the source system:
1.- log in into BI quality system --> RSA1 --> select source system which i need to deletse --> right click & delete
2.- Execcuting the FM 'RSAP_BIW_DISCONNECT.
If you cannot delete the source system:
Use fuction module RSAR_LOGICAL_SYSTEM_DELETE to delete
the source system:
1 - Go to SE37.
2 - Run fuction module RSAR_LOGICAL_SYSTEM_DELETE.
3 - Fill with the parameters as mentioned below:
      I_LOGSYS          = FUENTE
      I_FORCE_DELETE    = X
      I_NO_TRANSPORT    =
      I_NO_AUTHORITY    =
Or follow the recommendations from note 140276, Solution 2:
"You cannot delete the source system. Two cases have to be distinguished:
    o The source system still exists.
       Switch to Transaction SM59. Find the destination which has the
       same name as the logical system of the source system from field
       SLOGSYS in table RSBASIDOC (see above).
       - Such a destination does not exist in Transaction SM59. In this
          case, you have to create the destination to the source system.
          Name the destination equal the entry in SLOGSYS from above.
          Then return to the Administrator Workbench and repeat the
          deletion.
       - The entry exists but a remote login is not possible. Correct
          the communication parameters.
       - Everything works. Change to Transaction SE37, function module
          RSAR_LOGICAL_SYSTEM_DELETE, Sngl. test. Parameter I_LOGSYS =
          <log. name of the source system>, I_FORCE_DELETE = 'X'.
    o The source system no longer exists or was replaced with another
       source system with the same IP address.
       Proceed as described in the first case but make sure, that the
       field 'Target host' contains a not existing server in the
       maintenance screen of the destination (Transaction SM59). If
       necessary, change an existing entry. Later when you delete, the
       system asks you whether you want to delete, although the source
       system is not available. Select 'Ignore'. "
I hope it can help you.
Regards,
Fran.

Delete source system

Hello,
I'm working in BW 3.0B and i need to delete a source system but i don't know how.
Can anybody help me?
Thanks
Maria

Hi Maria,
goto rsa1->source systems, do a right click on the source system in question and select delete. That should do the job.
regards
Siggi

Deleting source system - background? any program?

Hi! We built our training system from a client copy of an existing system which has references to other source systems which are not relevant in this new system. I have been trying to delete the source system but it takes ages and often failed (drop-out) when I leave it overnight. Is there a quicker way to do this sort of clean up?
Appreciate any advice on the above.
Cheers!
SF

Actually, when I chose to delete the source, the system is already asking me whether I want to ignore the fact that the source system no longer exists so I am not sure whether that will fasten the process. However, I will still try this out and see how it goes. Thanks!

Deleting Source System

Similar Messages

Maybe you are looking for