Deletion of a field from a ztable(Data dictionary)

Hi Friends,
    I wanted to delete a field from z table in se11which is not required for proj. but it shows following message :
=========================================================================
   Activation of worklist (40044043 / 13.08.2008 / 15:06:04 /)
   =========================================================================
   Technical log for mass activation
      See log 4004404320080813150604:ACT
   TABL ZHRSJCO_CONFIG was not activated
   Check table ZHRSJCO_CONFIG (40044043/13.08.08/15:06)
   Field CONFIGTYPE was deleted
     ALTER TABLE is not possible
   Structure change at field level (convert table ZHRSJCO_CONFIG)
   Check on table ZHRSJCO_CONFIG resulted in errors
   =========================================================================
   End of activation of worklist
   =========================================================================*
   Could you guide me in this issue.
Thx in Adv.
Bobby

Hi BABA,
Goto Tcode SE14 , and Give the table Name, And Activate and Adjust...
It will work for sure....
Regards
Karthik D

Similar Messages

Deleting AET custom field from the SAP tableu2019s level.

Hi experts,
I am deleting few un-used custom fields in AET. I am able to see delete symbol as status in AET. Although deleted custom fields are present in lot of structure and tables (eg: CRMD_ORDERADM_H) in SAP GUI tables. I want to delete the custom field from SAP GUI tables and structures.
I tried to delete custom field from the SAP GUI tableu2019s level. But it is not allowing.
Please get me some clue on deleting custom field from the SAP GUI tableu2019s level.
Thanks in advance
Chand

Hi,
The deletion of custom field in AET happens in two steps:
1. You select a custom field that you want to delete, than you press on the delete icon in the Custom Field Assignment Block.
Doing this, you mark the selected custom field to be deleted.
2. You press on "Save and Generate" button. The "Save" will persist the deletion mark of the custom field. It means the custom field is marked to be deleted in the database. The "Generate" will process all the deletion of objects which are needed to delete the custom field, for example: Domain, Data Element, Append, etc.
If the "Generate" does not happen due any reason, the deletion mark is already persisted in DB. It means, later on if you go back to AET, you will see that the custom field is marked to be deleted, but it is not yet deleted.
If you do not press "Save and Generate" button at all, it means, you do not persist the deletion mark in DB. Later on if you go back to AET, you won't see that the custom field marked to be deleted.
Note: Please make sure, "Generation" is only applied for field that is flagged to be generated. The "Generate" flag column is by default hidden. You can use personlization to show the column.
Regards,
Steve

Deleting a single field from existing Layout - Update

Hi,
We need to amend our custom integrator's layout by removing a field from the layout.
However, in Desktop Integration - "Define Layout" - we do not have any option to delete a field (options are - Move Up/down, Read only, width,Frozen pane)
(Making width - 0 is not solving the purpose since only the field is not visible in layout but mappings remain as is)
Is there any option to remove a single field from integrator layout?
Thanks much in advance,
Rgds,
Sumanth

Duplicate post - Deleting a single field from existing Layout - Update
Srini

Deleting a single field from existing WebADI Layout (Update)

Hi,
We need to amend our custom WebADI integrator's layout by removing a field from the layout.
However, in Desktop Integration - "Define Layout" - we do not have any option to delete a field (options are - Move Up/down, Read only, width,Frozen pane)
(Making width - 0 is not solving the purpose since only the field is not visible in layout but mappings remain as is)
Is there any option to remove a single field from integrator layout?
Thanks much in advance,
Rgds,
Sumanth

Duplicate post - Deleting a single field from existing Layout - Update
Srini

Delete the payment details from a BPmaster data when there is still an deal

Hi All ,
what happens when i delete the payment details from a BP master data (counter party role in payment details tab ) when there is still an outstanding deal for this BP?
Will this be reflected in the saved deal, so will the deal go into error after the payment details have been removed?
I test this scenario in my dev system with following steps
1. I create a deal with t code FTR_CREATE
2. Delete all payment details from BP Master (counter party role in payment details tab )
3. i settle deal t code FTR_EDIT
4. I run TBB1 to create a payment request
5. then i run F111 and all required details and also payment request system is create payment without any error
all the able steps i did with out any error ... i think system should through error while running F111 t code because in BP master all data is deleted .
so i want to know whether system will through error mesg when we delete payment details from BP MASTER
regards

Hi,
The payment details are only a standing instruction which is captured by various create programs for respective financial transaction. Further, it is derived only once at the time of creation each time.
Deleting payment details will not give you any error message for already created transactions, for new transactions, you may have to put it manually at the time of creation else will throw an error message with TBB1.
Regards
Prasad AV

Uploading data from Excel into data dictionary

Hi all,
I am new to ABAP. I have a huge excel spreadsheet and I want to develop some graphs and reports using ABAP ALVs. I want to know if I can import an excel spreadsheet into data dictionary, create a table and then develop an ALV report.
Plz let me know.
Thank you.
Krish.

Refer to this sample code
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36f08758-0a01-0010-c291-c03004aeb1af">Function Module To Upload Data From</a>
or
Use ALSM_EXCEL_TO_INTERNAL_TABLE function module to upload.
Example programs added
http://www.sapdevelopment.co.uk/file/file_upexcel.htm
excel upload program
UPLOADING FROM EXCEL TO Z TABLE
Regds
Manohar
Message was edited by: Manohar Reddy

Values are generating in the prepopulated fields from the XML data sourece I binded to the fields

Hello,
Fairly new here.
I am trying to insert the payrate and name values in a pdf document on LiveCycle. I created the XML file from our access database (about 1100 names), created the text fields using the same field names in the XML file, connected the XML file in liveCycle, binded the fields but when I convert to PDF nothing is there. I think my issue is the script in the XML file. Has anyone else come across this issue. Please help me with what I am doing incorrectly.
I am hoping to just hit a button and 1100 documents will generate with the two fields prefilled. Am I dreaming?
Thank you in advance for your time.

Are the data values wildy different? i.e. Completely wrong, or are they off due to rounding?
I would start with member formulas and make sure that any in the BSO cube have been re-created in the ASO cube.
I guess, also double check that the level 0 export loaded, with no rejects.

Displaying standard email fields (From, To, Subject, Date) in a List configured to accept email messages.

OK, I'm no expert (can you tell?) and this is probably a stupid question to ask a bunch of SharePoint studs, but I can't find anything obvious in the online help. I want my users to be able to forward email from Outlook to a SharePoint list.
I want the default list view to display the standard email fields. How do I configure the List view to show those fields and be able to identify the messages of interest to them without having to open the file?
Thank you.
LO'D at Sanofi

Email files' properties are not promoted properties, so they will not display. You would have to create an ItemCreated Event Receiver to extract this data from the MSG and promote them on your own.
Trevor Seward
Follow or contact me at...
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Restoring a deleted column in Excel from a SharePoint Data Connection view

I used the "Export to Spreadsheet" option for a SharePoint document library to create my working report. I created a special view for this as I did not want all of the columns in my export. I build my report on a seperate tab in Excel
around this exported data and it has been working great. I recently added a new column to the view on SharePoint but it does not show up when I refresh my data. I tried manually adding the column, evening ensuring it was in the same orderl;
still no luck. The Connection file does not exist so I cannot edit the owssvr.iqy. All I have is the connection string and command text. I created a new workbook to see if the command string changed because of the new column but it did not.
I don't want to rebuild my report from scratch just because I added a new column, but it appears that may be the only option I have unless someone can answer my question.
Question: How can I get a new column from a view added to an existing data connection query?

Hi,
First, make sure you have added the new column into the view as well as the list.
Second, try to use "MSQuery" feature in Excel to check the issue.
For more information about MSQuery, please refer to the following link:
http://office.microsoft.com/en-us/excel-help/use-microsoft-query-to-retrieve-external-data-HA010099664.aspx
Jaynet Zhang
TechNet Community Support

Deleting a field from itab!!

hi i have a structure with certain fields which i am using for select query...but i dont want this field to get downloaded when i download the required data
the query seem to be like
select tel_number fax_number from adrc into corresponding fields of shipitab where addrnumber eq
shipitab-adrnr
after whihc im appending this as append shipitab.
n want to delete this particular field from shipitab....
tats it..

>
anjum ahmed wrote:
>
>
select tel_number fax_number from adrc into corresponding fields of shipitab where addrnumber eq
> shipitab-adrnr
>
anjum,
u are passing the fields to same work area from where u are reading the values in select statement? its not a good practice neither is the use of into corresponding.
and: after selecting (as u r selecting it into a structure) u can just clear the value of adrnr before appending to teh table.
like:
clear: shipitab-adrnr.
append shipitab.
or: if u want to delete after appending to table..
u can loop in the table and clear that variable and modify that record. like:
loop at shipitab.
clear: shipitab-adrnr.
modify shipitab.
endloop.
this will solve ur prob.. but using internal tables with header line is not a good practice as well

Delete standard fields from template repository

Hello,
We've created a repository based on standard repository template, which contains several fields that we don't use and we want to delete.
The problem appears after deleting different standard fields like:
MDMSRM_PRICE_INFORMATION
MDMSRM_CONTRACT_PRICE
As it seems the system is using these fields when displaying the catalog into the portal through iviews.
I've checked the UI Configuration into the web finished with .../MDM_SRM_UI_App, but I cannot find the fields I've deleted anywhere.
I've been reading different threads on this forum, but I'm not sure if I need to delete the deleted fields from an XML structure.
If I have to modify any file, where can I get the file to be updated?
If not, how should I proceed?
Thanks & regards,
Carlos Santamaría.

Hi Carlos.
Are you looking forward to 1. Revert back the fields which you have deleted or
2. Remove the fields from the XML data structure.
If (1) - Check the Note: 1171711 where you will find a PDF attached about the repository information which gives you more details about the fields which are available so that you can manually adjust your repository by adding those fields accordingly.
If (2) - In the configuration screen, provide your user credentials by selecting the repository and click "Transport Configuration" button where you can get the XML file to view the fields and edit the file by removing those fields and update back to it.
Note: SAP doesn't recommend you to delete fields from its delivered repository. Especially its price fields. So try to achieve your solution without deleting it if you can.
Regards
Bala

If I delete a 21 fields do I gonna lose all data?

Hello
As its production data I'm making sure....
We have a Z table with 83 fields, well. And currently there are around 50 entries in production in this table.
In 1st step: Now, as business scenario got changed, I have been asked to delete the 21 fields from this table, we are aware of that we gonna lose data for that specific 21 fileds in already existing entries, but we want to make sure that we not gonna lose all 50 entries completely and table count gonnna be 0!
In 2nd step: I need to add 27 new fields to this tbale....pls. let us know in this case as well that do we gonna loose data completely?
Pls. share your thoughts
Thank you

Thank you, yes, am not touching the key fields.
But, the yet to delete field's position is in the middle, I mean, 1st field is at 14th level/position, 2nd field is 17th level, 3rd field is 42nd position, so, even though they are in the middle of some fields, it is OK/safe right?
Regards

How to delete invisible fields from screen painter SE51?

Dear all,
How to delete/remove invisible fields from screen painter SE51?
Thanks.

HI,
just go to screen painter-->layout in change mode.
the invisible fields will be looking faded
click on that and press the DEL button.
that will be deleted.
<b><REMOVED BY MODERATOR></b>
vivekanand
Message was edited by:
Alvaro Tejada Galindo

Remove Value Field from Operating Concern

Hi all,
I created a new value field in DEV and assigned it to the corresponding Operating Concern.
Now, after some discussions, it is not necessary this value field.
I want to "un-assign" from the Operating Concern they use.
No data is being posted to this value field and nothing has been transported to QA yet.
Is this possible? Any ideas?
Thanks and Regards,
Flower.

I guess you can delete the value field as it was not transported to QA and PRD.
Here is some information given by SAP.
Deleting characteristics/value fields from an operating concern
You can delete characteristics and value fields retrospectively from an operating concern that you have already activated. However, you should only use this deletion function for operating concerns that have not yet been used productively. You should also note that some database systems require the operating concern tables to be converted (database conversion) after the deletion has taken place if data had already been posted to the operating concern. Depending on the data volumes involved, the database conversion can take a matter of seconds or indeed several hours. Moreover, you cannot post data or run reports during the conversion. Due to integration, other applications are also affected when data is postedwith an assignment to profitability segments (such as settlement and direct assignment from FI/MM). If the operating concern has been transported to another system (such as the productive system), then the database conversion must also occur in that target system.
Depending on the fields that were deleted, the following tables need to be converted (where xxxx = operating concern):
Characteristics: CE1xxxx, CE2xxxx, CE4xxxx, CE4xxxx_ACCT, CE4xxxx_FLAG, and CE4xxxx_KENC
Amount fields: CE1xxxx, CE2xxxx and CE3xxxx
Quantity fields: CE1xxxx, CE2xxxx, CE3xxxx, CE4xxxx, CE4xxxx_ACCT, CE4xxxx_ACCT, CE4xxxx_FLAG, and CE4xxxx_KENC
Before deleting fields from an operating concern with a large data volume (more that 10 000 records in a table), you should refer to the section "The Database Utility" in the ABAP dictionary documentation. This section describes the database conversion process.
For database systems that do not require conversion (such as DB2 for AS/400, Informix, MSSQL), it can still take a considerable amount of time for the operating concern to be activated.
To delete characteristics or value fields, perform the following activities:
1. Delete the corresponding characteristics and value fields from Customizing in all clients (this includes forms, reports, planning layouts, and so forth). To locate characteristics and value fields, use the appropriate where-used list in the Customizing Monitor. You can access it by choosing Tools -> Analysis -> Check Customizing Settings. You can jump directly from the where-used list to the relevant Customizing transaction and then delete the appropriate field there.
2. Switch to the screen for maintaining the data structure of an operating concern (Maintain operating concern).
3. If you need to effect other changes to the datastucture for the operating concern before making any deletions, effect those changes and save the data structure.
4. In order to be able to select the fields of the data structure, choose Extras -> Characteristics (or Value fields) -> Unlock.
5. Select the characteristics and value fields to be deleted and remove them from the data structure with the "Reset fields" function.
6. Reactivate the operating concern. The system starts by checking whether the operating concern contains any data and whether the fields to be deleted are still being used in any Customizing settings.
7. If none of the fields are still in use, the system then starts the re-activation. If the operating concern does not contain any data or does not require the database system to be converted, the tables are activated. You are then able to activate the environment for the operating concern. In this case, the following activities no longer apply.
If the operating concern already contains data, a system message tells you that the database needs to be converted. If you proceed, an activation log appears (at the top of the list).
8. Analyze the activation log. If it only contains error messages telling you to convert the tables, proceed with the next activity.
You must otherwise remove the cause of the errors before the tables can be converted. In this case, you should answer "No" to the next prompt, which asks whether the conversion transaction should start.
9. If you still only receive error messages telling you to convert the tables, choose "Back" and start the conversion.
10. Plan a job for the conversion. A list of the tables to be converted is shown for this. If the tables only contain a small amount of data (less than 10 000 records), then all the tables can be converted in one job. In that case, you can select all the tables.
For larger tables, conversion should take place in several jobs. However, you should ensure that table CE4xxxx (where xxxx = operating concern) is the last table to be converted.
Warning. No other changes can be made to the operating concern during the conversion.
A copy of the table is generated during the conversion. The database system should have sufficient memory available for this copy.
To schedule conversion as a job, use the "Schedule selections" function. You can display the current status of the conversion by selecting the "Refresh" icon. Tables disappear from the list once they have been converted sucessfully. If a conversion is taking a while, it is also possible to leave the transaction. You can then continue the conversion using DB requests -> Mass processing in one of the following ways:
With the job overview. You access this by choosing System -> Services -> Jobs.
Using the database utility transaction. You access this by choosing Utilities -> Database Utility in the ABAP Dictionary menu.
You can use the status function to call up the status of the operating concern during operating concern maintenance. You need to activate all tables after conversion.
11. To analyze errors that have occurred during the conversion, you can use the database utility transaction by choosing Extras -> Logs. The log has the same name as the conversion job: TBATG-date. You can also restart the conversion with this transaction.
For more information on the database utility, choose Help -> Application help while still in the above transaction.
12. Once you have activated all the tables in the operating concern, generate the operating concern environment from within operating concern maintenance.
You can then use the operating concern again.
If you want to transport the operating concern into a different system, see the section "Notes on transport"
Note
Hope this helps
Thanks,
Reddy
Edited by: reddy sap on Sep 11, 2009 6:58 PM
Edited by: reddy sap on Sep 11, 2009 7:00 PM

How to delete a specific request from ODS

Hi all,
We have an ODS which we're loading invoices from legacy system. In legacy system, there are two tables for invoices. First one is daily records which is archived on last day of each month. As you guess, second table is for archive records. We need all of the records from both tables. Because of performance issue , we don't want to load both tables everyday . So we created two transformation. Since there is no delta option, we need to delete the first table request from data targets before extraction. And delete the request from the second table only last day of month. We're created process chain. But there is no option for deleting only the request from a specific data source or transformation. Are there any solution for this?
thanks,
Yigit

Hi,
Thanks for your code. But is there any function module to delete most recent request from the ODS.
I had 2 requirements...One in need to delete from ODS & Other one from Cube.
FM - 'RSSM_DELETE_REQUEST' will be used to delete from Cube only.
Can please you send FM & ABAP Code to delete request from ODS.
Thanks in advance.
Yigit
Message was edited by:
Yigit

Deletion of a field from a ztable(Data dictionary)

Similar Messages

Maybe you are looking for