Delimited output of report that contains frames with Print Direction = 'Across'

Hello all.
On the header section of my report, I have a frame with Print Direction = 'Across'.
On screen the output is :
Value1 Value2 Value3 Value 4
I want to export this report to excel, by using DELIMITED option. However the output I'm getting is :
Value1
Value2
Value3
Value4
e.g., reports is not generating several columns (one for each field), but separate lines.
Anyone knows how to accomplish delimited output of frames with Print Direction='Across' ?
Thanks in Advance,
Octavio

If you're not generating both bitmap and delimited data from the same report, try using character mode output rather than "delimited". You can create the report to generate the appropriately delimited values to a text file. This will also give you greater control over aspects such as headings.
Delimited output simply uses the structure of the layout. It doesn't take into account the across/down repeat directions except in the case of matrix.

Similar Messages

Delimited output from Reports

Hello friends,
I am trying to produce delimited data based on a query which outputs department names.
The output data should look like:
SALES OPERATION SERVICE TECHNOLOGY
I have a repeating frame with Print Direction set to "Across".
To generate the file in Reports Builder, I do the following: File --> Generate File --> Delimited.
But the data I am getting looks like:
SALES
OPERATION
SERVICE
TECHNOLOGY
Any help or clues to the problem would be greatly appreciated.
Thanks in advance.
Sany

hello,
either ! depending on your application, if you want to set it dynamically or only want it in delimited.
regards,
the oracle reports team --pw

Generating delimited output from Reports Runtime R60

When generating a delimited file using Runtime how can you predict or determine how Oracle will form the output rows from the report layout? Does anyone have any documentation on Runtime that explains the generation process as there is nothing in the Runtime Reference manual.

The only documentation (such that it is) that I've found on this is in MetaLink, in Note 68245.1 "Delimited Output in Reports" and a tiny bit more in Note 120072.1 "Suppressing header on delimited output".
- Bill

Need a parked/blocked report that contains both the FI and MM number for ea

Hi Guys,
Business need a report which contains the translation of 'MM' numbers (typically beginning with '51') assigned for parked PO invoices vs. the 'FI' document number that comes out in the parked report.
Ideally, business need a parked/blocked report that contains both the FI and MM number for each record.
Can someone help me pull this report from MM
Thanks and Regards,
Habeeb

Hello Habeeb,
Check out the report MR43 which gives information about Parked invoice. Also you can have a look on MIR6 with check box Parked Innvoice.
The main table for parking invoice is VBKPF and other relevent tables are as follow:
VBKPF                          Document Header for Document Parking
VBSEC                          Document Parking One-Time Data Document Segment
VBSEGA                         Document Segment for Assets Document Parking
VBSEGD                         Document Segment for Customer Document Parking
VBSEGK                         Document Segment for Vendor Document Parking
VBSEGS                         Document Segment for G/L Accounts Document Parking
VBSET                          Document Segment for Taxes Document Parking
Hope this helps.
Regards
Arif Mansuri

I have created a form that contains fields with default text for a user to update/personalize. Is there a way to style the text so I can quickly identify changes to default text in a field?

I have created a form that contains fields with default text for a user to update/personalize. Is there a way to style the text so I can quickly identify changes to default text in a field?

George - Thanks you so much! Actually, i'd love for the text color to be red font color. Could you send me the script for that? And I assume I just copy and paste the script into the field properties (see screenshot)?
thanks again!
Seth

To display an html page that contains frames, using servelt

Hi all
i am using a servlet which has to display a html page that contains frames.
I would like to know whether it is possible to display a frame using servlets.
If yes please tell me the how to do it?
Thanks,
Sudheer.

Thanks Seth.
I just tried that, but when I run it in preview mode (by simply hitting F12), it gives me an error because it can't find the file in the temporary preview folder it creates (ie:
C:\Users\Tom\AppData\Local\Temp\CP2840464090993Session\CPTrustFolder2840464091009\Captivat ePreviewLoader\
I'm hoping to find a place to put it so that it works when running F12 and when running in regular 'published' mode
I was thinking I could put it in the 'C:\Program Files\Adobe\Adobe Captivate 6 (32 Bit)\Templates\Publish' folder, but when I do that, it doesn't seem to gete copied to the .\CaptivatePreviewLoader folder when running F12

HT1515 i want to know that how can i print direct from my pc, and i also want to knw that can i directly print from my ios device.

i want to know that how can i print direct from my pc, and i also want to knw that can i directly print from my ios device.

To print from your PC, please check out the following iFelix article.
To print from an iOS device (iPhone, iPod Touch, or iPad), the printer must be AirPrint-ready. If the printer is not, another option would be to use something like.
Also you can check out this Apple Support article.

Problem With Designing a Report that Contains a Subreport

Tools: SQL Server 2012 , Report Builder 3.0
I am having an issue creating a report that has a tablix with the main set of data all in a group and within a cell of that tablix I have a subreport that goes based on the previous data within that tablix group. Problem is, the subreport
works when it wants to or generates errors that aren't really helpful.
Error example:
Exception of type 'Microsoft.ReportingServices.ReportProcessing.ReportProcessing+DataCacheUnavailableException' was thrown.
An error has occurred during report processing. (rsProcessingAborted)
I am wondering if there is alternative way to accomplish what I need.
Report layout:
SQL Table ID
Data based on that ID
Subreport with data from above passed into the parameters.
repeat for the next table ID within a certain data range.

Hi redx350,
According to your description, we can try to refer to the following steps to achieve your requirement:
Create a parameter named ID in the subreport.
In the main report, right-click a cell to insert a subreport.
Right-click the subpeort to open the Subreport Properties, and select the subreport name in the drop-down list.
In the left panel of the Subreport Properties dialog box, click Parameters.
Select Name in the drop-down list of ID, and select [ID] in the drop-down list of Value.
Besides,
hereis
a feedback that you can vote for. This is a much better chance of this getting fixed if you log a Connect and vote on it to get it fixed. Microsoft would do take votes into account when
they prioritize features.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Creating Profile type report that hold fields with multiple values

Really hoping someone can please help me out as I am very new to Crystal Reports.
We use Maximizer CRM and we have been in need of some custom reports to rule out risk for regulators. I contacted Max and they suggested the only possible way is to create through Crystal. Its been almost one month already and I still cannot for the likes of me get this report operating properly. I have been inside and out on all sorts of forums, posted topics but no luck! So I will give it one more attempt in hopes that one of you geniuses can show me the way.
In Maximizer CRM there is date, numeric, alphanumric and table. Our table fields items can be set to either single value or multi-value. So in crystal i did a default join of Client.tbl and the user-defined fields from view and joined the client id and contact number from all the view fields to client table. See Image:
and I have dragged all the relevant fields in rows (in details section) rather then columns because we would be reporting on more then 1 record at a time. My problem is - If there is a table with multiple items selected (values), the records triple in count and it will show the same record over and over with just single field value changing at a time.
The formula field you see in the image is from when I posted a discussion and Abhilash assisted me by providing the formulas I should add:
1) Create a formula with this code and place this on the Details Section:
whileprintingrecords;
stringvar s := s + {field_with_multiple_values} + ", ";
2) Next, move all the fields (except the formula field above) from the Details section to the Report Footer
3) Create a formula with this code and place this on the Report Footer. This field would replace the existing field that contains multiple values:
whileprintingrecords;
stringvar s;
Left(s, len(s)-2);
This method is not working out for this type of report. When I add the formula Crystal is still counting my 2 records as 5 records but I can only view it as a single record and the multi-field has all the values for both records and displaying as a single record. See image:
Can anyone please assist and advise where I am going wrong?
-Jared

Hi Jared,
Thanks for taking down memory lane that is Maximizer. Nice to see their table structure hasn't been simplified in the last 20 years.
If I understand what's happening, you should only see 2 records and not 5. That means your joins are creating duplicate records. For now I'm going to skip over trying to optimize your query because I still have bad dreams of linking Maximizer tables.
There are a couple of ways to work around the duplicates, one is to create a group and instead of having your formula in the Detail section, put it in the Group Header. The question is what would you create your group on that would get you a unique record?
If you know where the duplicates are coming from, create a Record Selection Formula that will remove the duplicates.
There is also the menu option Database | Select Distinct Records. I've never really had success with this one but there's no harm in giving it a shot.
I would have you try and find which table or combination of tables is generating the duplicates but that requires playing with your links. Normally I'd start by adding one table at a time and dropping one field onto the report. If it doesn't repeat then add another table and field and repeat until you get your duplicates. Once you know where they are coming from then you can either drop that table from your query or create a selection formula that removes the duplicates.
Good luck,
Brian

Delimited output in reports

I am building a simple report for address labels. I also want to to produce the address list in delimited format.
The generation of the report into PDF works fine, however delimited output does not include all of the fields of the report.
The approximate field layout is
Name
Address Line 1
Address Line 2
Experimenting a little, it seems that the fields only generate in delimited format if they don't overlap vertically.
ie Name AddressLine1 AddressLine2
This produces the correct delimited output, but of course is nothing like what I want for an address label.
Version: Report Builder 6.0.8.8.3
I have seen some references to a patchset in other discussions. Where can I obtain these patches from?
thanks, evnafets

I'm sorry I guess I didn't make my problem clear.
I am generating delimited output from the menu: File:Generate To File: Delimited
The generated file does NOT include all the fields from the Layout view, unless they don't overlap vertically.
So if my layout view looks like
Name AddressLine1 AddressLine2
(all fields on same line)
The delimited file produces correctly.
ie Name,AddressLine1,AddressLine2
(using comma as delimiter)
If my layout view is
Name
AddressLine1
AddressLine2
(Three vertically overlapping fields)
It only produces:
Name
Somewhere along the way, the address lines get lost.
If the Layout view is
Name AddressLine1
AddressLine2
It produces
Name, AddressLine1
And (Last example)
Name AddressLine1
AddressLine2
Produces Correctly (note no vertical overlapping)
I can't pretend to understand WHY it is performing like this, but thats what happens on my machine.
Thanks for the information on the patches - I'll upgrade and see if the issue goes away.
I did read and understand earlier posts about the labels printing, and I think its worth patching up just to get the feature to switch them off.
Thanks, evnafets

How can I list all folders that contain files with a specific file extension? I want a list that shows the parent folders of all files with a .nef extension.

not the total path to the folder containing the files but rather just a parent folder one level up of the files.
So file.nef that's in folder 1 that's in folder 2 that's in folder 3... I just want to list folder 1, not 2 or 3 (unless they contain files themselves in their level)

find $HOME -iname '*.nef' 2>/dev/null | awk -F '/' 'seen[$(NF-1)]++ == 0 { print $(NF-1) }'
This will print just one occurrence of directory
The 'find' command files ALL *.nef files under your home directory (aka Folder)
The 2>/dev/null throws away any error messages from things like "permissions denied" on a protected file or directory
The 'awk' command extracts the parent directory and keeps track of whether it has displayed that directory before
-F '/' tells awk to split fields using the / character
NF is an awk variable that contains the number of fields in the current record
NF-1 specifies the parent directory field, as in the last field is the file name and minus one if the parent directory
$(NF-1) extracts the parent directory
seen[] is a context addressable array variable (I choose the name 'seen'). That means I can use text strings as lookup keys. The array is dynamic, so the first time I reference an element, if it doesn't exist, it is created with a nul value.
seen[$(NF-1)] accesses the array element associated with the parent directory.
seen[$(NF-1)]++ The ++ increments the element stored in the array associated with the parent directory key AFTER the value has been fetched for processing. That is to say the original value is preserved (short term) and the value in the array is incremented by 1 for the next time it is accessed.
the == 0 compares the fetched value (which occurred before it was incremented) against 0. The first time a unique parent directory is used to access the array, a new element will be created and its value will be returned as 0 for the seen[$(NF-1)] == 0 comparison.
On the first usage of a unique parent directory the comparison will be TRUE, so the { print $(NF-1) } action will be performed.
After the first use of a unique parent directory name, the seen[$(NF-1)] access will return a value greater than 0, so the comparison will be FALSE and thus the { print $(NF-1)] } action will NOT be performed.
Thus we get just one unique parent directory name no matter how many *.nef files are found. Of course you get only one unique name, even if there are several same named sub-directories but in different paths
You could put this into an Automator workflow using the "Run Shell Script" actions.

Creating a report that's compliant with SEC

Does anyone have experience in creating a marketing log that's compliant with SEC. Need to generate a report that shows whichmarkting materials were sent, how they were sent (email or mail) date sent and by whom. any advice is much appreciated. i've been trying for weeks to solve this issue

You should be able to use Activities to track the marketing log information.

Displaying report that contain sub report

iam using main report that has sub report but when displaying the main report in crystal report viewer the section of the sub report is shiffted to the right.
what can i do?
Best Regards,
Rabab

David,
The easiest way to do this would be to build a query in Access that provides this for you. You can do it easily using a two query approach.
QueryNo1:
SELECT
TransactionTable.TransactionID
FROM TransactionTable
WHERE TransactionTable.Price < 0 OR TransactionTable.Quantity < 0
QueryNo2:
SELECT *
FROM TransactionTable
WHERE TransactionTable.TransactionID IN [QueryNo1.TransactionID]
This will give you all of the TransactionID's that have a negative transaction associated with it.
Once you have the query completed to your satisfaction and saved, you can use it as your data source in CR. CR will see it as a View. If you make it a parameter query, CR will see it as a Stored Procedure.
Hope this helps,
Jason

Privilege to save report that contains HTML markup

I created a new user & when I login as this new user & try to save a report, I get the below error message:
You do not have sufficient privileges to save a report or dashboard page that contains HTML markup. This report contains a ticker view which can contain HTML. Ticker views must be deleted before saving.
How do I provide sufficient privilege so that the user does not get this error message? I am hoping that the user do not have to be added to the 'Administrator' group.
Thanks,
Dinesh.

I did add this user to the Administrator group & it still did not help. I was trying to refresh & save the report in the shared folder which was originally saved by the Administrator.
When I (new user) create a new report & save, this error does not come. In short, I think that this is a 'replace' problem & not a 'save' problem. Any insight?
Thanks,
Dinesh.

Premiere Pro CC reports that video frame size is 720x480, however it's really 1920x1080

The end result is I'm getting black bars across the top and bottom of the video when the video should be consuming the entire space.
The source media is 1920x1080 resolution, and Premiere agrees when I check the properties of the file in the timeline, however for some reason the black bars are still being inserted. If I go to Sequence > Sequence Settings though, it reports that the video is only 720x480
If I change this value to 1920x1080 Premiere just blows up the video beyond its normal resolution making it look pretty bad/pixelated
What exactly is going on here, how can I get Premiere to just use the original resolution size of the video?

Thank you,
I changed the Editing Mode in Sequence Settings to "Sony XDCAM EX 1080i (HQ) And it automatically picked up the correct resolution and exported correctly.

Delimited output of report that contains frames with Print Direction = 'Across'

Similar Messages

Maybe you are looking for