Delisting of an article

Hi Friends,
Hi Gurus,
The delisting of an article is for a particular site(1000), but the same material to be access/transaction for other sites(1001, 1002, 1004)
We delisted an article from a particular site by T code WSP6 . Now system is not allowing to create stock transfer order for that article and site but still sales order is getting saved...
once a article is delisted from a site no transaction of that article should happen for that site(i.e. sales order booing,invoicing,stock transfer etc.).
Kindly let me know if by any other means we can achieve this
Suneel

Hi Suneel,
First you have to remove Articles from Assortment:
(a) You can remove an article by either deleting the listing conditions or discontinuing the article
(b) Deleting Listing Conditions
When the assignment of an article to an assortment is deleted, only the listing conditions for it are deleted. The article master record still exists and inventory may exist, but you can no longer order the article (you may be able to sell it, however).
When the listing conditions expire (that is, when the valid-to date is reached), you can choose to extend the listing window, if necessary.
Deletion of the articles listing conditions can also be done manually. To reverse this, you would have to create the listing conditions all over again
Hope this info will be usefull.
Bye,
Muralidhara

Similar Messages

Log for delisted articles

Dear all,
Please, let me know if there is a way to find when an article was delisted! It seems only listing log can be found in article changes.
Also, can you tell me the difference between deletion and discontinuation of an article?
Thank you very much for your time!
Regards,
Miro

Hi Miro,
Discontinuation means stopping the business process or logistic process for an article due to various reasons. Discontinuation can then followed by logical deletion where the article is still there in the system but marked for deletion. Finally you may choose to delete the article physically from database.
So deletion is applicable for all processes whereas the discontinuation can be done for a specific master data. For example, the article may be discontinued from a Vendor as the Vendor does not supply that, it can be discontinued from a distribution chain and so on. I hope this will clarify the doubt. If you google it you will find lot of information on discontinuation.
You can find more information on Discontinuation Monitor in the below link.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/30/5a2407b8334a96a5da555309722940/content.htm?frameset=/en/57/dd65c7dd3d44cd80e695a1eade82a5/frameset.htm
Regards,
Amit

POS outbound assortment list - deleted EAN's/delisted articles

hi All,
does anyone know whether it is possible to send a deletion indicator down to POS for the assortment list? IT seems that deleted EAN's trigger a change pointer but WBBDLD IDoc only contains the updated article details only. Also, when an article is delisted from a site, is it possible to send a deletion indicator as well?
REgards,
James

Hi James,
in the assortment list customizing it is possible to activate sending of delisted articles.
Please check the the profile parameters.
SPRO -> Logistics - General -> Assortment -> Assortment List -> Maintain Profile for Assortment Lists
Here the flag
DELETION for LISTINGS
For details please look at documentation.
If you are using the HPR (High performance Retailing) Assortment list, this will be not possible. In this case you have to initialize the list. Deleted articles will not be a part.
regards
Björn

Article Deletion in SAP Retail

What is the process for deleting an article and then archiving the article in SAP Retail ECC6.0? So far what I have is to:
1. Go to MM46 and find layouts for article
2. Go to WLWBN and Delete Assignments
3. Go to Assortment in WSP6 and delist from DC and stores.
4. Stop replenishment and procurement using MM42 go to Logistics -- General Control Param -- Article Status -- status block article
5. Go to ME15 and Mark Info Recs for deletion
6. WRF_DIS_SEL - Put in Article and then click "Client_Wide Article Discontinuation" to get green button. Select All - discontinue
I need to know what is wrong with the above process, or what do I need to add to the above process? The issue is that we will go into SARA and try to delete the article and the process ends up not being able to see the article for deletion. We have no activity against the article and no inventory for that article. So there must be something I am missing here.

Probably a bit too late, but check this information:
Retail Material Delete Flag

Article Listing and system performance

While creating physical inventory document, we experienced running each site for 25 to 30 minutes. With over 140 sites, it will take approximately 3 days just to create the PID's. We had consultants looking into our system and suggested that we could delist to improve the PI process and overall system performance. Through initial testing of delisting (WSP6), it did not help the PI processing time(creating PID's through MI31). So, I thought that we should archive site data only, but not at Client level, meaning delete all site extensions. Can somebody tell me (a) if this is the right approach?, (b) what are the things to watch out for? (c) can I list the article again if later we find a need for it?
Looking forward to some help. Thanks.

Re-posting this message. Can somebody help?
Thank you.

Is there a way to prevent DPS from going to next article when using swipe left/swipe right?

I have placed web content in an article in Indesign with swipe left and swipe right function and it works just fine except for one thing. When swiping the animation starts but it also goes to the next/previous article in the folio. Is there a way to fix this?

Hey Eric,
Thanks for taking the time. Unfortunately no that does not solve it. Same as swipe it will get me there and it will show separate programs spaced out. The issue I am having is that all my open word files are bunched up in a pile on top of each other. I can see the edges of each one but I want them to be separated from each other enough that I can visually identify what file is what.
Again, thanks for trying, it is appreciated.

Free goods determination in variant article

Hi ALL!!!!
The issue is regarding IS-Retail. In case of order processing with variant article free goods is not getting active. The item category of the parent article is TAG and for the variants is TAN. When I am maintaining freegoods for the variant then also its not getting picked up nor when I am maintaining free goods for the parent article.
Please suggest
regards

Hi
1) In IS-Retail Variant article as called Generic Articles (retail terminalogy).
2) Come to freegoods, In retail you can use promotion concept to maintain the freegoods determination for generic artilces and it should test with POS system.
regards
satish

Handling of Hazardous Articles in SAP Retail

Hi SAP Retail Experts
Would like to know the porcess in SAP to configure the hazardous goods management in Article master whereby we can accomodate the dangerous goods data from and external system into Article Master.

Dear Pratim
I don't catch your question. Check e.g. SAP Environment, Health, and Safety Management (SAP EHS Management)
1.) the term "Dangerous Goods" and Hazard substance" is not the same
2.) In EHS classic you can get external data for DG use using ALE; same is true for hazardous substance master
I have no experience with SAP Retail. But according to SAP help: This is a SAP ECC/ERP system in a "special" mode (you have activated an "industry specific" function). So you need to prepare EHS customizing
C.B:

HT1449 Ok. I have an '06 Macbook Pro still running on Snow Leopard 10.6.8, and iTunes 10.6.1. I did everything in this article leading up to step 14. I thought I trashed the right file, now I can't access my music which is on my external drive now. Help!

As stated in my above Subject field. I have an older Macbook Pro and I was attempting to move my iTunes media file using this article:
http://support.apple.com/kb/ht1449
After getting to step number 14, I "thought" I selected the correct media file to trash from my system. Now I have my correctly copied Itunes file on my external drive that can't be accessed when I reopen iTunes. How can I get iTunes to open to my new destination now? I went to iTunes > Preferences > Advanced and selected the new location then click OK, but it still won't access.
What am I doing wrong here?

I had the same problem and found the answer!
In Outlook, go to the Help menu, then Check for Updates.
I downloaded & updated Outlook, then it upgraded my database, and everything worked out fine for me!
Good luck!

Can not preview articles tried to refresh works sometime then stops

when I try to check mail or roll over articles to preview then nothing happen if you keep trying to refresh it will start to work but when you return to home then it stops

I'm not sure how to close my discussion but I did find the solution to my problem... When I did the download from my hosting provider, I inadvertently added the host's .htaccess file to my local folder. Oops. Deleted the .htaccess and we were back in business.
Thanks to those who tried to help.

Failure of a single article prevents the distribution of all articles in a publication to a subscriber

We have a SQL Server 2012 R2 SP2 environment and Transactional Replication configured with 1 instance publishing all tables in a database via a single publication (circa 150 articles in the one publication). We have a separate distribution instance,
and a third subscription instance. All articles in the publication are configured to copy all data, with no advanced filtering configured. It is also noted that Alerts were not configured in Replication Monitor.
We had an issue whereby, inexplicably, a table on the subscriber vanished (I use this term because I could not find any record in the log file of a DELETE statement being issued against that table - regrettably I wasn't in the position to query the distribution
database for any such commands either).
In Replication monitor we saw that the article for the table in question was failing, but no others.
The issue was that no other articles were being replicated to the subscriber, and this was evident via stalled rowcounts on the subscriber database, but increasing rowcounts on the publishing database.
When we removed the offending article from the publication, all other articles started getting applied to the subscriber database - and we could observe both publication and subscription rowcounts increasing in lockstep.
My questions are:
1) in a single publication with many articles, are the articles applied to the subscription in a single batch - meaning that if a discreet transaction for one article fails, that all other articles will be rolled back with this transaction until it
is cleared.
2) Why would Replication Monitor not start showing widespread warnings for every other table (article) that was not successfully being replicated to the subscriber?
3) Aside from configuring alerts in Replication Monitor (which has happened already) and a bespoke rowcount checking 'monitor', how could Transactional Replication be configured so that the failure of the publication of an obscure article doesn't fail all
articles --> I note that creating multiple publications with smaller number of articles would limit the exposure, but from what I've observed, this would only limit the exposure to those articles in the same publication.
Many thnaks

1) they could be - it all depends on the batch size.
2) I suspect because the distribution agent applies the changes serially, ie one article after another in the order the changes occurred on the publisher. So if it fails on one table it will not continue until this error is leared.
3) use the continue on data consistency error profile, or put your problem article in its own publication.
looking for a book on SQL Server 2008 Administration?
http://www.amazon.com/Microsoft-Server-2008-Management-Administration/dp/067233044X looking for a book on SQL Server 2008 Full-Text Search?
http://www.amazon.com/Pro-Full-Text-Search-Server-2008/dp/1430215941

How do I force an HTML Article to load on every view rather than load a cached version of the page?

I've got several HTML articles, one is a search page. When you click a search result I am setting a variable in localStorage for the search query so it can be highlighted on the result page. When you get to the result page however, 99% of the time it loads a cached page. I need to force it to refresh and execute the JavaScript on every view not just when the View Application decides it should. Also the thumbnail is often cached to a really old version with something highlighted that you searched for 10 mins ago.
Is there any API that I can make the HTML Article load on every view?
Many thanks,
Kris.

Flash only supports a small amount of html in text areas. If what you re trying to include is within what it supports, then you assign the text to the textfield using the htmlText property of the TextField...
tfield.htmlText = "<a href="...">link</a>"; // will display "link" as a link

Can links from InDesign or InCopy Articles use non-file: URLs?

I am trying to determine if InDesign CS6 or newer provides any way for links to be to URLs that are not file: URLs. For example, I am using a CMS that provides HTTP access to images. I would like to do something like:
        <Link
          Self="uf3"
          AssetURL="$ID/"
          AssetID="$ID/"
          LinkResourceURI="htp://myrepository.com/resource/binary/myimage.jpg"
       />
My experiments suggest that this will not work but I'm hoping I've overlooked something.
Another wrinkle is authentication: for access to the CMS the URLs need to be authenticated, which means InDesign would need to get then authentication information on at least first resolution.
Is there a way to do this out of the box? If not, what would be required in terms of plugin implementation or library deployment to enable it? Back in CS3 days we were able to use some unsupported libraries to get URL resolution working but it would be nice if it worked out of the box.
Thanks,
Eliot

As far as I know there is nothing new in CS5 (or CS4 for that matter) regarding which styles are retained when exporting frames to InCopy. If you're exporting an individual story (text frame) from ID to IC, the only styles in that ICML file will be the ones used by the text in the story. If there's no text in the story -- you're exporting an empty frame -- then the ICML file won't have any styles.
It's been this way as long as I can remember.
What you need to do in InDesign is keep some fake text in the text frame to which you've applied the styles you want the InCopy users to use. Export that, then in InCopy, open it up, delete the text, and the styles will remain. Now you can save it as an actual InCopy template file (ICTD? something like that) from the Save As menu, and when IC users open it, it'll create an untitled, empty copy of the starter InCopy document with all the styles.
In a non-Woodwing workflow, InCopy users open the actual INDD file and so have access to all the styles, even if the story frame they want to work on in that layout is initially empty. Or, they can import (Load) all the styles from an InDesign doc into their standalone InCopy file from the InCopy Paragraph Style panel menu (Load All Styles).Not sure if you can do the latter w/Woodwing.
I was pretty sure that Woodwing had a different way of creating InCopy templates, something like InCopy article templates? Not sure.
AM

Preview shows only one page of article

I have a 23-page portrait-only article for which I can preview only one page. Normally it is the first page, but if I click on any other page, the preview shows that page -- but the slider on the bottom of Content Viewer shows only the first page regardless of what page is in the preview window. I'm a newbie at this, and this is my second article; the first one worked just fine. Put them together in a folio, in either order, and the "normal" one shows all pages, and the other shows only page 1. Any thoughts?
Jose

Silly newbies... I read some of the layout options in Plain English. Apparently, if the article isn't set to "horizontal swipe only" it's on vertical swipe only, not "optional." The Aha! moment came from accidentally brushing the mouse so that the preview scrolled upward, revealing the pages hidden below. Now I get it.

Found an article why IOS6 had issue on iPad Via masahable

http://mashable.com/2012/09/19/ios-6-upgrade-problem/
Apple customers around the world got their first taste of iOS 6 on the iPad and iPhone Wednesday — and as with any major upgrade, there were headaches as well as delights in store.
The new OS had its share of teething troubles, most notably a Wi-Fi login bug that Apple quickly and mysteriously resolved. Other users saw ongoing problems with accessing music on their iPhones.
The troubles started with the process of downloading the massive update itself, which clocked in at a hefty 2.5 GB. iOS 6 is an “over the air” upgrade, meaning no connection to iTunes is required. It also meant that millions of early adopters were all trying to grab the file at the same time when it first appeared in Software Update Wednesday morning.
Apple servers seemed to hold up pretty well under the pressure, although users saw wildly different download times depending on their connection, location and time of day — from a few minutes all the way up to 5 hours.
Many found a greater problem was in store when the update installed itself, and froze with an apparently empty progress bar. If they were patient, however, the bar would suddenly show a lot of progress very fast — as much as an hour later.
SEE ALSO: Hands On With iOS 6 [VIDEO]
Then came the Wi-Fi bug many users spotted at once. Attempting to log into Wi-Fi networks their phones and tablets had previously recognized and stored passwords for, users were assaulted with a login page that directed them to a non-working URL at Apple.com.
When confronted with the bug, the company acknowledged that it had existed, but shouldn’t be a problem any more. Sure enough, whatever switch was flipped on the backend worked, and the Wi-Fi bug vanished.
Meanwhile, some users — myself and this Apple support forum included — reported that their Music libraries had suddenly vanished. Playlist, Artist and Album names all remained, but the tracks themselves were unavailable.
A spinning wheel in the upper left corner of the device’s screen indicated that the Music app was trying to access something, but the songs remained stubbornly invisible, even to Siri.
We’ve reached out to Apple to see if this is another day-one bug that can be quickly solved. In the meantime, how was your iOS 6 upgrade experience? Let us know in the comments.
UPDATE: A MacRumors commenter offered a plausible explanation for the Wi-Fi bug — the fact that your device is supposed to ping “http://www.apple.com/library/test/success.html” to test its connection, but that someone at Apple may have temporarily deleted that page.

I understand all of that. When sharing an article via facebook on the ipad I can view the article just fine. When sharing the article through facebook on a desktop computer I can't view the article. It goes straight to the paywall message. I have most of my articles metered and once the user has viewed 3 articles in a given issue they hit the paywall. It seems to be only working on the ipad and not on iMac. Do you know why this would be?

Delisting of an article

Similar Messages

Maybe you are looking for