Delivery not created immediately after SO is saved

Hi All,
I created a document type ZB01 by copying from document type CS (cash sales). I tried to set the shipping conditions to be "immediately" and "as soon as possible". But after the sales order is saved, no delivery is created. Only after I changed immediate delivery from "X" (create immediately, if quantity can be confirmed) to "A" (create immediately), the delivery is automatically generated. But the problem shouldn't be related to the amount of goods in stock. I checked the goods in the specific plant, it has more than enough to confirm. And in the sales order, the quantity of schedule line is also confirmed. Can anybody help to explain this issue?
Thanks, Jerome

Hi,
Irrespective of the shipping conditions, as long as the Immediate delivery (X or A) is set, the system should generate a delivery doc automatically. May be you can try this:
Set the Immediate dely indicator back to X and then create a SO. If it does not create a delivery, open the SO in the change mode and then save again. Check whether it creates a dely doc this time.
can you pls confirm whether this is working for you?
Thanks,
Siva

Similar Messages

Delivery not created in cash sales

Dear Gurus,
I am facing an error while processing a cash sales scenario.I am creating a sales order for cash sales and trying to save it.After saving system shows error as orders saved ,delivery not created.(message no V1261)
I have checked all the configuration in document type.
Immediate delivery is maintained as X
Shipping condition - 03 immediately
Lead time - 0 days
The system is showing sufficient stock in MMBE. (the material is batch managed)
still it is not creating delivery document.
Against the message V1261 I found one SAP note but it is of 1998 and not valid for ECC 6.0
Please suggest solution on highest priority.
Rgds,
Anand

Hi there,
I see it in 2 ways:
1) If you want auto delievry immediately after the SO is loaded, then the order loading prog MV45AFZZ should call delivery prog SAPMV50A automatically if order type is BV after order save . For this you need to customize sothat delivery is created automatically after order is saved.
2) If there is a manual delivery involved, check what error you are getting when creating a delivery. Pls refer to my comments above to check the possible errors.
Hope this helps
Regards,
Sivanand

On my MacBook with Lion Safari does start, does not react immediately after trying to open it. Installing a new Safari does not help. Removing parts of Safari in the Library did not help. Where can I find and remove all components (LastSession ...)?

How can I reset Safari with all components? On my MacBook with Lion, Safari does not start, does not react immediately after trying to open it. Installing a new Safari does not help. Removing parts of Safari in the Library does not help. Where can I find and remove all components as LastSession and TopSites?

The only way to reinstall Safari on a Mac running v10.7 Lion is to restore OS X using OS X Recovery
Instead of restoring OS X in order to reinstall Safari, try troubleshooting extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.
If it's not an extension or plug-in issue, delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.

Delivery not created in Merchandise distribution - WF30

Hi Experts,
I am came accross an issue wherein delivery not created for merchandise distribution.
It is automatically created at the time of goods receipt.
We are using flow through process.
On same day, three PO created via allocation table. Each PO had its STOs linked to it and same article in it.
For two POs, merchandise distribution happened automatically on goods receipt.
For third PO, it failed for same article.
I can see in WF30, there is FT qty populated in adjust button.
That means qty is adjusted per STO.
But then delivery not created.
I am wondering why is is not created for one PO but processed successfully for another two POs.
Article master is not chenged.
Can anybody please advice, what could be the possible reason for it.

Sagar,
For the article in the third PO, please check what storage location is being picked up. Check the cumulative ATP quantity for this article/storage location (use Co09 with checking rule B). There maybe a shortage of stock.
Thanks,
Suhas

Outbound delivery not created automatically

Good Day,
A STO posted from a supplying plant to a plant creates an automatic outbound delivery.
When creating the STO with the same supplying plant and plant but a different material the automatic outbound delivery is not created.
What settings should apply to the material as this seems to be the only different input between the two STO.
The config settings seem correct as the automatic outbound delivery does happen when a different material is used.
Thanks
Lindsay

Hi Lindsay,
Check this note:
1069448 - Outbound delivery not created automatically in ME21n for
STO
Also, note that this thread should be moved to Logistic Execution space. This way you can get more helpful answers.
Kind Regards,
Mariano

Outbound delivery not created

Hi,
I have the following scenario in STO:
Planned delivery time for a material =2days
When material delivery date is on wednesday , system proposed delivery creation date as monday-that is ok.
When material delivery date is on thursday, system proposed delivery creation date as tuesday- that is ok.
When material delivery date is on tuesday, system proposed delivery creation date as friday(2day minus as Saturday but since saturday is holiday , it take Friday)- that is ok.
Problem is in situation:
When material delivery date is on monday, system proposed delivery creation date as Friday(2day minus as Saturday but since saturday is holiday , it take Friday). Systematically this is ok but not physically as other plant has holiday on saturday and sunday , so if it get delivery on friday , they can't ship before tuesday.
Please suggest, how this issue can be resolved.
Regards
Sandeep Kumar

Hi Lindsay,
Check this note:
1069448 - Outbound delivery not created automatically in ME21n for
STO
Also, note that this thread should be moved to Logistic Execution space. This way you can get more helpful answers.
Kind Regards,
Mariano

Adobe After Effects CC 2014 Multi-machine rendering does not create RCF after Collect-File

This was working in the previous release. After going through all of the steps to perform a multi-machine render, not only does it say it is limiting it to 5 machines instead of the usual 99 (and I have over 100 cores on the render farm) but "Collect Files" (File/Dependencies/Collect Files) does not create the Render Control File (RCF) that kicks off the process on the other machines, like it did before and is supposed to do.
This release was supposed to fix the 32 core limitation on render nodes (my server has 48), but now does nothing at all.
Anyway, I assume there is a check box somewhere that says "do something" that hasn't been checked and another that says "Maybe my machine has more than 5 cores", and I would appreciate being steered in the direction of these new mis-features.
Just as background, the 48 core server does show the little TV screen that monitors the watch folder, and I know for a fact that process looks for the "RCF" file. Looking at the directory specified for "collect files", I can see that no RCF file is created, only 1 file, a report.txt file which contains this information is produced:
Report created:
7/9/2014 1:54:12 AM
Project name: highup.aep
Source files collected to:
P:\temp\highup folder
Source files collected: All
Collected comps:
Thomas Falke - High Again High On Emotion)
Number of collected files: 1
Size of collected files: 63.4 MB
Collected source files:
C:\Users\Jeff K\Videos\Down\2014-2015\Thomas Falke - High Again High On Emotion).mp4
Rendering plug-ins:
Classic 3D
Effects used: 1
Effect: Detail-preserving Upscale

The dialog box has been slightly refactored. You must click "Allow watch folder rendering" and then all is good. Hope this helps anyone else. Thanks to Rafil at customer support chat for this.

Enable "External Identification of Delivery Note (LIKP-LIFEX)" after PGI

Hi Frnds,
I have a specific requirement where in After PGI is done, the field "External Identification of Delivery Note", in the administration tab of the VL02n transcation, has to be enabled for user input.
In the Standard SAP normal process, this filed becomes non-editable once the PGI is done for a delivery.
Is there a way we can acheive this?
Z subroutines, exit...???
Many thanks in advance.
Regards,
Karthick C

There is no way to do this in standard SAP.
Alternative way is after PGI, un-do PGI, update the field and again PGI using a custom program which is very cumbersome.
Thanks
Nagarajan

PO not created automatically after creation and approval of SC

Hi all,
We are using SRM7.0 Extended Classic Scenario.
We are able to create Shopping Cart successfully.
For items where a source of supply is not supplied, the Shopping Cart goes through the approval process and then into the sourcing Cockpit.
But for the other Shopping Carts, PO is not getting created automatically after the approval of SC.
Any ideas/suggestions on this issue would be highly helpful.
Thanks,
Priya

Priya,
Can you check this configuration in Sourcing for particular PCat?
*Automatic requirement grouping; sourcing for items without assigned*
source of supply:
Then run the report BBP_SC_TRANSFER_GROUPED which will automatically group requirements together for
the creation of a PO.
And, If the requirement does not have a source of supply, it appears in the work list of the sourcing application for manual assignment. Once you have assigned a source of supply, you can submit the requirement to the report.
Let us know if it works, and should help you this one.
Thanks,
Rahul Mandale

ERP Delivery not created when triggered from TM

Hello Experts,
I have a OTR & Freight Order created in TM successfully. Could also assign a carrier to it. From the Freight order Management screen when the Send Delivery proposals to ERP, the system sends a XML message that is successful in TM. But in ERP there are no deliveries created. I could not see any error in the Queues or the XML messaged.
My observation is there is no XML message in ERP system for the delivery creation.
Could anyone throw some light on why the deliveries are not created?
Regards,
Vasu

Thanks Marcelo,
I missed to check the PI system, the message was stuck there since the mapping was missing in PI.
Regards,
Vasu

Automatic delivery not created

Dear All,
When i am making the the cash sales so in that case automatic delivery should be created even though the settings are fine....So when i am making the sales order some time it create the automatic delivery and some time it say that delivery is not created for same material.....so please throw some lights on it....
Thanks & Regards,
Mohsin

Hi ,
Check whether the material is relavent for delivery . coz some materials are relavent for delivery and some are not and check the material any blocks are there.
that is also one possible reason.check the status of the sales order before u going to save . Also check the Copy controls of the sales document sales order to delivery.
if its not let me know any thing information u required .
Reward if Helpful...
Regards
Praveen Kumar.D

Single STO Outbound delivery not creating for different lines in PO.

HI ALl...
1... I have 2 different ST PO which raised by other plant(plant is same), and it contains different line item.
When try to do outbound delivery in VL10B, it is creating seperate outbound delivery doc to each item, but not created single doc for all items.
Please let know, if any thing needs to be done, to get create single outbound delivery for all the items in PO.
2... Is it possible to pick the Price automatically ( MAP of the supplying plant material), while create Billing in VF01.
Regards
Chandradhara...

HI..
I have checked and corrected Delivery date/ loading group and Transportation group, now it is coming single delivery document.
OTHER REQUIREMENT IS;
We need MAP of the Supplying Plant to be picked will do billing for PRICE condition. What settings should be done
Regards
Chandradhara

Password not required immediately after wake from sleep

Every once in a while when my retina macbook pro wakes from sleep I do no need to enter my password immediately. Instead it just starts with no password required and then 5-10 seconds later it takes me to the lock screen and asks for my password. Other times it will ask for my password, start up after its entered and then 5-10 seconds later it takes me back to the lock screen and asks for my password again. Usually when it "takes me back to the login screen" it actually just makes the screen black until I press a key or move the mouse and then it "wakes up" again and shows the login screen.
Also is it common for it to hang for a while before allowing me to type my password after waking from sleep? Frequently it will take 10+ seconds before I can start typing in the password field or the clock updates etc. Its a 2.3ghz core i7 with 16GB of ram.
I have installed all updates and it should be noted that I do have the "require password immediately after sleep or screen saver begins" option enabled in system preferences.

Hi Kevin,
You mention that you moved the TC's network up in priority, so you may have already done these things as well. Apologies in advance if that is the case.
If you normally use your MBP with wireless, make sure that the AirPort connection is that top of the connections list in System Preferences > Network. Click on small gear icon at the bottom of list to put the Airport connection first in line to connect so the MBP will not look for an ethernet connection first.
Click on the Airport connection to highlight it and then click Advanced. If you have other wireless networks that you can delete, use the - (minus) button to do so. Ideally, you'll only have a few networks displayed. Confirm that your wireless network name is first at the top of this network list.
Make sure there is a check mark next to Remember Networks Joined. Leave the next two check boxes blank.
Any help? My MBP connects consistently and quickly with these settings when the cover is opened.

Need to run the BDC job immediately after XK02 is saved.

Hi all.
I have to trigger a batch job (BDC program) after changing the customer thru xk02 TRANACTION.
I found one exit EXIT_SAPMF02K_001 which checks before saving. But my requirement is job (BDC prog) should run after saving. So I guess its of no use. Do we have any BADI ( method)....?Can you pls let me know how to procede.
If workflow is the solution...
I have run the event traces by transaction code swel & sels, I could not find any event triggering to tigger the workflow ( to perform background task) Do I need to create Change document & BOR for acheiving this thru workflow .
Cheers,
sami.

Hi Neha.
Thanks for quik turn around. But I need this z program to run after all changes are done in XK02 because I need to use the changed vendor data in the BDC program. This is the exit which triggers before save, so I couldn't get the changed vendor data from database table to use in z program (BDC).
Hope I am clear.
Cheers,
sami.

Delivery not created in make to order cycle

Hi
i am in the make to order process scenario and facing problems while creating a delivery after production order has been confirmed. The steps followed are
1. i create an order with M1 and quantity 100 - T code : VA01
2. i create a sales order BOM for the sales order created above and using material M1 - T cose : CS 61
3. This is followed by a production cycle - planned order, production order and confirmation with lot size of 7.
4. as one production order of size 7 is confirmed, the stock is generated of quantity 7 for the material M1. using MMBE i can see the stock being created.
5. Now as i go and try and create the delivery against order created in step 1, i get the error and that "No schedule lines due for delivery up to the selected date".
6. When i check my order in display mode, under schedule line it shows M1 with order quantity as 100 and confirmed quantity as 0.
Could you please advise if after the confirmation of production order, the schedule line in order will show quantity 7 and if i can delivery against it. Or is there any other way of creating the delivery.
Thanks

Hello,
In MTO scenario the following happens:
1. Sales Order is created - standard requirements type determined is KE which fetches requirements class 040. The requirements class 040 has controls for MTO & special stock indicator will have entry as "E-orders on hand".
2. After MRP is run the system will transfer the requirements to PP, a planned order will be created which is then converted into a production order.
3. After running the production cycle the goods will be transferred to the finished goods storage location.
4. Now when you check in the transaction code MMBE the system will show the material stock & under the sales order stock only.
5. But when you check the sales order -- line item schedule line, the system displays the confrimed quantity as "zero".
Explanation:
You created sales order for item A - 100 Quantities. Production was completed for 20 quantities. System shows sales order stock of 20 quantities only.
When you had created a sales order for item A the system after running the availability check would have determined a delivery date by way of which it would have shown you say 2 different schedule lines as under
Delivery Date.............Order qty............Rounded Qty...........Confirmed Qty
01/05/2009...................100......................100............................0
15/05/2009.....................0.........................0.............................100
The second date the system determines taking into consideration the inhouse manufacturing time specified by you in the material master (MRP2 screen) & the other settings which aare applicable for the checking group specified in the material master.
On 15/05/2009, if you create a delivery, the system will allow you to create the delivery irrespective of the stock in the plant. But at the time of post goods issue you will face a quantity deficit error.
If the goods are received in the finished goods storage location before 15/05/2009 say on 10/05/2009, the system will not update the schedule line automatically & when you try to create a delivery the system will display the error "no schedule lines due for delivery".
Solution:
Transaction code VA02 - select the sales order number - double click on the line item - go to schedule lines - here click on the button "Item Availability" or press "Ctrl + F5" to run the availability check. As you have stock of 7 quantity, the system will display 7 quantity on the curretn date. Select the option delivery proposal to continue. Now the system will show 2 schedule lines as under
Delivery Date.............Order qty............Rounded Qty...........Confirmed Qty
01/05/2009...................100......................100............................0
10/05/2009.....................0.........................0..............................7
Save the sales order & then create a delivery. The system will not give any error.
Note: You have to manually confirm the quantities for a make to stock sales order in case if the goods are received before the delivery date specified by the system.
With best regards,
Allabaqsh G. Patil
Idhasoft Ltd.

Delivery not created immediately after SO is saved

Similar Messages

Maybe you are looking for