Dell P2715Q Issues after 1 month

I got my P2715Q about a month ago from B&H Photo. It was working fine till the other day. First it wouldn't come on when I booted the PC until I pulled the power cord. Then today, I waited till the PC started to boot and instead of my desktop I got a series of vertical lines. My other monitors were working just fine. Using my second monitor, I rebooted the PC and got the same thing. A pull of the power cord brought the desktop back. I have also seen occasional artifacts in some windows / apps but they go away if I close and reopen the window / app. Since the other monitors are working I am thinking it is either the mDP on the graphics card or the cable or the monitor.
* What is the 20 digit alpha-numeric monitor serial number? CN-06PPKV-7445-4CP-189L
* What specific computer model? Homebuilt
* What operating system? Windows 10 build 10061
* What video card? Nvidia GTX690
* Video card driver version? 390.05
* What video out ports are available on the video card? Two Dual Link DVI-I. One Dual link DVI-D. One Mini-Displayport 1.2
* What video out port are you using from the video card to what video in port on the monitor? mDP
* What cable are you using to attach the video card to the monitor? mDP to DP that shipped with monitor
* Press the monitor Menu button to open the monitor OSD (On Screen Display). The bottom of that screen should show a resolution. That resolution should match the monitor default resolution
Running at native 3840x2160, 60Hz

"It was working fine till the other day."
Was it working fine on the un-tested Windows 10 the entire time? Or was it working fine using Windows 8.1 and then you upgraded to Windows 10? The reason I ask is because we have not validated Windows 10. We do not have any drivers for it so we can only assume that you are using the Windows 8.1 64bit driver and Windows 8.1 64bit Dell DDM application in Windows 10?
I also do not see a certified Windows 10 driver from nvidia for the GTX690? I only found a "beta" driver.
We need you to move the P2715Q to a computer running a supported operating system and re-test.

Similar Messages

T.Code for issues return by the user after month closing

Dear SAPient's,
Give us the transaction facility available in SAP to account the issues
return by the user after month closing.
regards,
Bijay Jha

Dear SAPient's,
Actually I want to know that when the Goods Issued and from that some goods are returned back due to any reason.
I want to know Is there any T.Code from which i can get full details of Goods which is returned after Issuing in one month.
Warm Regards,
Bijay Kumar Jha

HT202856 Dell P2715Q for 2013 Mac Pro.

The new Dell P2715Q 4K monitor looks to be a technically compatible monitor for the new Mac Pro. I see it supports DP 1.2 and MST.
Anyone using this monitor and and vouch for its use.
Thanks.

Hi,
I just setup a pair of these P2715Q monitors with my 2013 MacPro using the supplied MiniDisplayPort to Displayport cables. The screens look fantastic. The main issue I'm having is after restarting or cold starting the computer. Both monitors appear and only show a blank desktop. No menu bar, no Finder icons, etc.
The only fix so far is to power off one of the monitors - then back on. Then all is fine. I've unchecked the Mission Control thing to allow displays to have separate spaces. On a normal startup - the second monitor is usually just a blank desktop. It's like they are both showing that blank desktop.
You mentioned you were having similar issues. Any other resolution to this?
I ordered a pair of minidisplayport to minidisplayport adaptors to try - incase the rub is with the included cable configuration. I've tried resetting PRAM, NVRAM, etc. - Tried different thunderbolt ports.
Actually - when trying different thunderbolt ports - things got wonky in that the second monitor stopped being acknowledged by the computer. I kept moving the thunderbolt cable around - then it finally came back on. Not fun.
Another strange issue yesterday was when I sat down to work - both monitors were in sleep mode (computer still running though) - the primary monitor wouldn't activate. Even after a restart. I couldn't even power cycle the monitor with the power button. I ultimately had to pull the power cord on the monitor to get it back. Again... not fun.
One thing to note as well - My primary monitor is Rev 01... the secondary was built 2 months earlier and shows Rev. 00. I'm waiting for them to replace the second monitor. These guys update the firmware and other items and never tell anyone what's changed. But I sure want the most current build.
Any thoughts? - I'm running 10.10.2.
Thanks,
Sam

Sudden very sick Photoshop CS2 after months of no problems

after months of trouble free pshop cs2 on a QUAD with 4 GB RAM 10.4.8
recently added CR3.6.
repaired perms
verified disk
ran disk warrior
re installed a new CS2
detached all external fwires
any other app works
if i load pshp cs2 most features work
if i load one image and grab the paintbrush and try to use any of the numbers to control opacity i can no longer do anymore with the program
it freezes up.. Raw images load as do jpegs as do tiffs but if i try to use the numbers to control i get freezing
I cannot for the life of me understand what happened.
What is left to do?
(erasing the drive?)

maybe first try running hardware test - should be on OS install DVD - seen Photoshop issues caused by failed processor.
in user home folder - library folder - preferences folder
look for file "Com.Adobe.Photoshop.plist", move it to desktop
also look for Adobe folder inside the preferences folder
look for similar files in root level library folder - preferences folder
move all Adobe preferences folders to desktop
look for any cache folder for Adobe in user home folder-library folder - caches folder and move it to desktop
do not do anything with system folder - things could get messed up, otherwise should be ok.
restart machine
all Adobe customized setting will revert to defaults
try using CS 2 - if works, delete all the stuff from desktop after a few days, if that does not help, move the files/folders back to their locations
attempt at your own risk though

Bad Desktop Performance with Dell P2715Q

Hi everybody,
I'm using a 15" Mid 2010 Macbook Pro with the following specs:
- 2.4GHz i5
- 8GB 1067 MHz DDR3
- Samsung Evo 850 (250GB) as Startup Disk
- GeForce GT330M 256 MB
- External Dell P2715Q with MiniDP to DP cable at 2560x1440
- Yosemite 10.10.2
- External Keyboard and Mouse, both wired
Unfortunately (apart from my Graphics Card being unable to output 4K but I accept that, this machine is almost 5 years old) the performance when using normal desktop operations is really bad on the Dell monitor. Some things like scrolling in Finder and Safari work fluently, but most not. Here's a list:
- Minimizing and maximizing, moving and opening windows is lagging
- Horrible video performance when watching Youtube HD videos, especially in fullscreen. Sometimes nothing happens for more than 5 seconds, screen simply freezes
- Lags when using some third-party apps even when only scrolling through text (for example Matlab)
When the issues above appear, the process WindowServer has a very high CPU usage, my computer starts to heat up and burn enormous amounts of energy, gets unusable. I googled the issue with the WindowServer and followed the advice, reducing the transparency helped a little but especially the issue with Youtube videos is unchanged. Even when doing nothing, the CPU usage of the WindowServer never drops below 0.5%. In general, the experience when working on the external monitor is kind of slow and really unsatisfying, different then what I'm used to from the Macbook. From the 8 GB of RAM I have, 5.7GB are used when simply typing this text in Safari apart from having Outlook and a terminal open (plus some background apps like Dropbox).
Things are a little better when working in closed-clamshell mode (mostly the issues with handling windows, HD video in fullscreen still *****).
The only things I haven't tried is resetting the SMC & PRAM since users reported that doing so doesn't help at all.
Any help would be highly appreciated.
Edit: My Yosemite Installation is a fresh and clean installation, nothing was transferred/proted from an older Mac OS installation, apart from some documents of course

Well it obviously supports the resolution (also according to the datasheet) and playing HD video at lower resolutions works fine.. I just saw this:
2014 Macbook Pro 15" doesn't work well with 4k @ 60hz, obvious lag due to high WindowServer CPU utilization
which makes me think that it's not really a performance thing but more a bug in Yosemite.

Internet Explorer issues after installing Update KB2955163 on Windows 8

Dear,
Since we've installed Windows update KB2955163 on Windows 8, we've been experiencing the following issues:
- After using Internet Explorer for a long while (one hour or longer), some websites won't work properly anymore. For example: list boxes and pop-ups don't appear.
- After using Internet Explorer for a long while (one hour or longer), employees can't access any external webpages. They receive a message saying the webpage isn't available. Reconfiguring the Proxy-settings will temporarily fix this problem.
*The above problems don't appear on all of our computers running Windows 8.
We've found the only fix for these problems, is to uninstall Windows update KB2955163.
All of our affected systems are running Windows 8 Enterprise x64, and come from various manufacturers (Dell / HP etc.).
Is anyone of you guys familiar with these specific issues regarding Windows update KB2955163?
Many thanks in advance,
Thom

Hi,
Did this issue occur on all computers which installed that update?
In generally, it's not most likely be Windows update cause.
Let's narrow down the issue:
Have you tried to reset the Internet Explorer to check the result:
1.Close all Internet Explorer windows that are currently open.
2.Open the desktop, and then tap or click the Internet Explorer icon on the taskbar. Changing your settings will affect both Internet Explorer and Internet Explorer for the desktop.
3.Tap or click the Tools button, and then tap or click
Internet options.
4.Tap or Click the Advanced tab, and then tap or click
Reset.
5.In the Reset Internet Explorer Settings dialog box, tap or click Reset.
6.When Internet Explorer finishes applying default settings, tap or click
Close, and then tap or click OK. You'll need to restart your PC for these changes to take effect.
If it persists, perform a clean boot to see if it caused by some third-party software:
How to perform a clean boot in Windows
http://support.microsoft.com/kb/929135
Karen Hu
TechNet Community Support

IPv6 prefix delegation: after months of working fine, today no prefixes available

Subject says it all. After months of having a /64 prefix delegated to my home network and working pretty reliably, today the dhcpv6 client is reporting: IA_PD status code NoPrefixAvail: "No prefix available on Link 'wa-bellevue-ten04-". Suffice it to say I can't get a /64 allocated. Can someone investigate?

I am seeing the same issue, it started yesterday (16 June 2015) sometime in the afternoon. I discussed this with Comcast support today, and was told that they will not help because my cable modem is my own (I don't rent one) and they therefore have no access to my modem. I am skeptical that this is a problem with my modem, as this (a) worked in the past, and (b) iappears that the DHCPv6 packet from Comcast is denying a prefix delegation: Jun 17 12:18:05.357 PDT: IPv6 DHCP: Received ADVERTISE from FE80::21D:70FF:FECC:58E2 on FastEthernet0
Jun 17 12:18:05.357 PDT: IPv6 DHCP: detailed packet contents
Jun 17 12:18:05.357 PDT: src FE80::21D:70FF:FECC:58E2 (FastEthernet0)
Jun 17 12:18:05.357 PDT: dst FE80::216:C7FF:FE7C:BFBC (FastEthernet0)
Jun 17 12:18:05.357 PDT: type ADVERTISE(2), xid 12121931
Jun 17 12:18:05.357 PDT: option CLIENTID(1), len 10
Jun 17 12:18:05.357 PDT: 000300010014A412E3B0
Jun 17 12:18:05.357 PDT: option SERVERID(2), len 14
Jun 17 12:18:05.357 PDT: 0001000117323D5614FEB5D6E776
Jun 17 12:18:05.357 PDT: option IA-PD(25), len 71
Jun 17 12:18:05.357 PDT: IAID 0x00020001, T1 0, T2 0
Jun 17 12:18:05.357 PDT: option STATUS-CODE(13), len 55
Jun 17 12:18:05.357 PDT: status code NOPREFIX-AVAIL(6)
Jun 17 12:18:05.357 PDT: status message: No prefix available on Link 'wa-everett-ten05-link-S'
Jun 17 12:18:05.357 PDT: option PREFERENCE(7), len 1
Jun 17 12:18:05.357 PDT: preference value 0
Jun 17 12:18:05.357 PDT: option DNS-SERVERS(23), len 32
Jun 17 12:18:05.357 PDT: 2001:558:FEED::1
Jun 17 12:18:05.357 PDT: 2001:558:FEED::2 I do receive a /128 IPv6 unicast address for my router itself, and it can access the internet at large via IPv6. Comcast support did confirm that I should be receiving a /56 delegation.

Does anyone solved wifi issue after ios 6 or 6.1.2 or 6.1.3?

My wifi works intermitently. sometimes it is grayed out, sometimes it is just searching network. I dont know how this issue has come? This all started after ios 6.1.2. and ios 6.1.3 didnt fix it for me. Have done all reset or restoration as a new device but with no success. I think apple is going to bite the dust very soon if this continues. Please note the router is woking fine coz i m running new ipad on ios 6.1.2 and there is no issue with wifi. Should i wait for ios next update or get the wifi module fix.? this is what i was told by one person who does all phone repair work.
Suggest something concrete. i am without wifi since last 1.5 months now. Apple is just ignoring the problem. does anybody solved this issue after multiple software updates ? The problem is my warranty is gone in January itself. and i have purchased this phone from USA and i live in india.

See if this helps
http://support.apple.com/kb/TS1559
if not, it is hardware failure. Apple provides warrantee support for iPhones only in the country of sale.

Bluetooth adapter issue after being unplugged then plugged back in

I am running 10.7.4, MacBook Pro 2 GHz Intel Core i7, 16 GB Ram, Thunderbolt Display with Apple wired Keyboard and Apple Magic Mouse.
Initial issue:
After using the Magic Mouse for a few months I noticed a significant performance issue with the mouse when the internal hard drive would spin up for large data transfers, Time Machine backups, etc. I spoke with Apple Care and tried a number of things, tried switching the wireless network, all with no sign of a fix in the future. I paired the mouse with other computers and could never re-create the issue. I also paired other Bluetooth mice with the laptop and could not re-create the issue. After doing further research I found a number of people on-line that started to use an external Bluetooth adapter which would bypass the internal one. After purchasing one from Amazon, the results were immediately superior. I had plugged the adapter into the underside of my Apple wired keyboard and performance was as expected.
However, this has led to issue number 2:
My MacBook Pro will travel with me often therefore requiring me to unplug it from my "desktop" setup which is it plugged into a Thunderbolt Display, and the display has all of the peripheral plugged in including the wired keyboard with the external Bluetooth dongle plugged into it. When I have had my computer away form the set up for a few hours/days and then come back to plug it in, all external devices work immediately with the exception of the magic mouse. It will sometimes work fairly quickly, within a minute of plugging into the Thunderbolt display, and sometimes I am unable to make it work at all unless I restart the machine. This issue has happened with and without the Thuderbolt display. Any assistance is greatly appreciated. Thanks!

Never got a green light.. does that mean no light at all.. or is it flashing amber??
The series 1 particularly but it happens in series 2 and 3 the TC power supply breaks. Then if you power down and turn it on again it is dead. No light at all. The power supply was on the edge and after powering off does not have the ability to supply start current to the TC so shuts down.. If you plug in after a while the light my flash briefly and go out.. it will not happen again until you wait a few hours for the caps to discharge.
If you have Apple Care on a computer and the TC is less than 3years old Apple will replace it.. otherwise you are joining a large and ever growing multitude of dead TC owners.
See repair possibilities or repairer list here.
http://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modems /apple-time-capsule-repair

I am unable to backup after months of successful backups. Receive "iPhone could not backup the iPhone because the backup was corrupt or not compatible with the iPhone.

I am unable to backup my iPhone4 (4.3.4) after months of successful backups. Receive "iPhone could not backup the iPhone because the backup was corrupt or not compatible with the iPhone. Followed advise on user forum to delete the old backup... did not help. Need to do a backup. Is there a cure?

The only thing that resolved it for me was to COMPLETELY remove all Apple components per http://support.apple.com/kb/ht1925. I also downgraded to iTunes 10.3 since my issue didn't start until after the 10.4 update. May not be related but oh well....You will have to restore your old iTunes Library file (*.itl) if you downgrade.

Iphone 5 issues after IOS 8.2 update: my husband's phone and my phone get the same phone calls ONLY when we are home. Any suggestions on where to look to fix this?

Iphone 5 issues after IOS 8.2 update: all the iphones in the house receive the same phone calls ONLY while we are at home. Any ideas on how to fix this?

That is a new "feature" described in Connect your iPhone, iPad, and iPod touch using Continuity
You can turn it off by going to Settings > FaceTime and changing "iPhone Cellular Calls" to off

Authorization issue after the Support packs upgrade

We're having problem on authorization issue after the SP upgrade.
One issue if "You are not authorized to call up line item display" using FCH1 and FS10N tcodes.
And the SU53 showing problem on S_TCODE FAGLL03.
How are we going to solve this issue? We dont want to add this missing auth object on all our finance roles.
Thank you in advance.

How can i send you the trace file? What is your email address?
If I were you, I won't do that. Did you not ever sign some confidentiality agreement? I wonder.
Anyhoo... (copy right @ David)
What are the objects been caught in category RC=4, RC=12?
Relate them with functional aspect of the transaction (error screen)
Edited : You can paste RC=4, RC=12 objects here without customer specific value if you want to.
Regards,
Arpan Paik
Edited by: P Arpan on Aug 23, 2011 2:36 PM

WiFi issue after 6.1.2 upgrade

I upgraded my OS to 6.1.2 and now I'm having troubles connecting to the internet at work. I did reset my network settings and inputted the appropriate password and still having issues. It identifies the network but when open safari or an app requiring internet connection it goes nowhere. Is anyone else having this issue. Does anyone know how to fix this problem. Keep in mind my connection works fine at home.

Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Lumia 1520 Battery Discharge Issue After Updating ...

After updating to Denim, my Nokia Lumia 1520 started to experience the following symptoms:
Phone charges to 100%, I disconnect and use an app like Instagram BETA, Internet Explorer, Lumia Camera, or any game--after no more than 5 minutes of use, the phone gives a "Critical Low Battery" alert and shuts down. If I try to restart phone immediately, it makes it to the AT&T splash screen or lockscreen and then same battery message appears and shuts down. If I wait 10-15 minutes after the shutdown to restart phone (without recharging) the phone will stay on, but battery level will report to be in the low 20s or 10s (whereas no more than 20 minutes ago, it was 100%).
When phone is at 100% battery: I take 2-5 photos or record mere seconds of video and I get the same "Critical Low Battery" alert. Upon restarting, some of the photos or video are nonexistent or corrupt files and battery level is reported at 2-5%.
However, if my phone is plugged in to charger, none of these "Critical Low Battery" alerts come up and I am able to use phone as usual. Considering that I cannot take a vacation and capture nature's beauty with an AC adapter always connected, this is a serious drawback.
Steps I've Taken:
Soft-reset
Full factory-reset
Moved all apps off microSD card (this improved situation maybe 5%)
Disabled almost all background app use in Battery Saver
Replaced microSD card when I thought this was a memory write/read issue
Installed "Battery" app to monitor battery use. After 750 data points were logged, my average battery life is reported at "16 minutes," which sounds about right.
My warranty should be expired since I purchased the phone December 2013, so I'm checking in here if anybody has had any luck with battery replacements or with a solution to this issue? At the same time, this issue arose strictly after updating to Denim and I've seen other users report this EXACT scenario. Is there any hope for Lumia 1520 users on this?
Other reported cases:
Battery Issue after Denim update: http://forums.windowscentral.com/nokia-lumia-1520/347112-battery-issue-after-denim-update.html
Battery critically low and shutdown: http://forums.windowscentral.com/nokia-lumia-1520/342343-battery-critically-low-shutdown.html

Hi albertico, TeJazz, and Samgh. Welcome to the Microsoft Mobile Community. We understand your situation and in response to this issue, we suggest that you perform the suggestions in the photo attached. If the issue persists, we recommend recovering your phone's software using the Windows Phone Recovery Tool. This link will work regardless of your location. If the same thing happens, it's best to take your phone to the nearest Care Point in your area for evaluation. Backup first to avoid data loss.
Attachments:
Battery drains fast.JPG ‏147 KB

Issue After Rating setting is enabled to the Discussion Board List in SharePoint 2013.

Hi ,
We are facing issues After Rating field is added to the Discussion Board List in SharePoint 2013. We are getting below error while adding a new item or editing a new item. Did anyone got this issue earlier and any solution for this.
Ashish Kumar Baranwal

Users which were getting issues actually getting below error:
[COMException (0x81020014): One or more field types are not installed properly. Go to the list settings
page to delete these fields.<nativehr>0x81020014</nativehr><nativestack></nativestack>]
Microsoft.SharePoint.Library.SPRequestInternalClass.AddOrUpdateItem(String bstrUrl, String
bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bPreserveItemUIVersion, Boolean bUpdateNoVersion, Int32& plID, String& pbstrGuid, Guid pbstrNewDocId, Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames,
Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bUnRestrictedUpdateInProgress, Boolean bMigration, Boolean bPublish, String bstrFileName, ISP2DSafeArrayWriter pListDataValidationCallback, ISP2DSafeArrayWriter
pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback) +0
Microsoft.SharePoint.Library.SPRequest.AddOrUpdateItem(String bstrUrl, String bstrListName,
Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bPreserveItemUIVersion, Boolean bUpdateNoVersion, Int32& plID, String& pbstrGuid, Guid pbstrNewDocId, Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames,
Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bUnRestrictedUpdateInProgress, Boolean bMigration, Boolean bPublish, String bstrFileName, ISP2DSafeArrayWriter pListDataValidationCallback, ISP2DSafeArrayWriter
pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback) +565
[SPException: One or more field types are not installed properly. Go to the list settings page to delete
these fields.]
Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx) +146
Microsoft.SharePoint.Library.SPRequest.AddOrUpdateItem(String bstrUrl, String bstrListName,
Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bPreserveItemUIVersion, Boolean bUpdateNoVersion, Int32& plID, String& pbstrGuid, Guid pbstrNewDocId, Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames,
Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bUnRestrictedUpdateInProgress, Boolean bMigration, Boolean bPublish, String bstrFil
Ashish Kumar Baranwal

Dell P2715Q Issues after 1 month

Similar Messages

Maybe you are looking for