Delta Initialization with different selections issue for Purchasing.

Dear Experts,
I have a scenario where in my source system i have data for Purchasing from April 07 to till date.
i want to report on Open PO value, so i planning to do the below.
1. As i don't want anything other than PO which are open for a certain Business area only (if i do this the data volume will be less)
i will extract as init only those open PO of that BU from April 07 to September 08. and after loading that i will load all the data for month of October 08 by way of init giving selection as october 08 to october 2020 so if any changes happen to the old po then the changes will come as i have already initialized them and from now on new PO and changes to PO from October will flow.
Is my thinking correct or else am i doing something wrong.
Thanks and regards
Neel

Hi,
If I remember correctly, the open PO is designated by 2 other flags don't recall them at the top of my head) and not by BU or date.
If you initialize by using dates and BU selection, its going to bring in all types of POs not just closed and moreover, you'll be losing out POs for other BUs.
I suggest you initialize the data for the whole of Purchasing and bring that to the EDW layer. Then from there you can create a reporting layer and put filters to extract the data only for open POs, or BU specific , etc.
The other way you could structure your design here is to bring in all the Purchasing data and then restrict it in the query to report only open PO, etc
You might require the other Purchasing data in future even if there is no requirement now and then you'll again have to reinit and you might want to avoid that.
Cheers,
Kedar

Similar Messages

How to call the same query more than once with different selection criteria

Hi,
Please do anybody know how to solve this issue? I need to call one query with the fixed structure more than once with different selection criteria. For example. I have following data
Sales organization XX
                     Income 2008 Income 2009
Customer A       10                 20
Customer B        30                  0
Sales organization YY
                     Income 2008 Income 2009
Customer A        20                5
Customer B        50                10
Now, I need this. At the selection screen of query, user fill variable charakteristic "Sales organization" with interval XX - YY, than I need to generate two separate results per sales organization, one for Sales Organization XX and the second for SO YYwhich will be displayed each on separate page, where result for SO YY will be dispayed under result for SO YY. Are there some options how to do it for example in Report Designer or WAD or with programming? In Report Designer is possible to use one query more than once, but I dont know how to force each query in RD to display result only for one Sales Organization, which will be defined in selection screen.
Thank you very much
J.

Hello,
thanks to all for cooperation. Finally we solved this issue with the following way..
User fill appropriate SO on the selection screen, which is defined as range. This will resulte, that selected SO are listed in report below each othe (standard behavior). Required solution we achieved with the Report Designer, we set page break under each Result row of RD. This caused, that report is divided into required part per SO, which are stated each on separate page.
J.

How to Upload different Material with Different Selection View

Hello Experts!
Iu2019m new in ABAP and trying to understand methods of LSMW. Now I get a question for you guys. Let say I need to upload 10 different materials. Now for instance.
1st material has Basic data 1 and Basic data 2.
2nd material has Basic data 1, Purchasing and Purchase Order text
3rd material has Basic data 1, Classification, Purchasing, MRP 1, MRP 2 & MRP 3.
4th material has Basic data 1 & Basic data 2.
5th material has Basic data 1, Classification, Purchasing, MRP 1, MRP 2 & MRP 3.
And so on. Now here Iu2019ve notice that every material has different INDUSTRY SECTOR, MATERIAL TYPE AND SELECTION VIEWS. I understand that Industry Sector, Material Type and other data I can specify in my file but how I can control SELECTION VIEWS for different materials. Because for different Selection view coming screens will become different accordingly.
So can somebody can please tell me how I can control different select views for different material and upload it in SAP.
Thanks.

Hi
I understand that you are performing LSMW on MM01 transaction code..and are uploading through batch input in LSMW.
Actually, for a tcode like MM01 I dont think you should use LSMW, instead you can go with the BAPI: BAPI_MATERIAL_SAVEDATA.
The views is a serious problem with MM01 when performing using batch input..
So, go through the documentation in SE37 tcode for the BAPI...
The information you get there will help you on how to proceed.
Regards,
Vishwa.

Different number range for Purchase requistion

Hi,
While converting Planned order to Purchase requisition (Manual Run), i need different number range for Purchase requistion for different plant.
I maintained different number ranges in OPPQ, and maintained number range in OMI3, the number range which i ahve maintained as per the plant are seems to be not working.
Can somebody help me in this..
Kariya...

hi,
Please define the number ranges with respect to the MRP group OPPR,OM12 and OM13 with respect to the plant and try hope it helps
Regaards
sravanthi
Edited by: Sravanthi683 on Jul 10, 2009 8:58 AM
Edited by: Sravanthi683 on Jul 10, 2009 9:00 AM

2 Init with different selection

Hi All,
I want to run 2 inits on a single data source with different selections for that , after running the first init do I have to remove the init from the first package and then run the second package?
Thanks.
Tina

Hi Tina,
There can be many Init runs in your infopackage given that the selection ranges for the different Inits are not overlapping. For different Selection ranges you can do different Inits. You can check the Initilization table in the Scheduler menu of your Infopackage.
Hope it will be useful
Thanks
Kishore

Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

The link is to a discussion started on 12/18 in the FiOS Internet forum. Here's the link I get now, however it is different than the link I pulled a few hours ago. If this system changes the link again, it may not work.
http://forums.verizon.com/t5/FiOS-Internet/Frustration-and-just-confused-with-internet-help-please/t...
You can also look for the topic, "frustration and just confused" in the FiOS Internet forum.
Here's a link that is in the thread that gives more detail.
https://secure.dslreports.com/faq/15984
Good Luck!
P.S. "Copper Contributor" is my "rank." gs0b is my user name.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Where can I purchase 2d characters that come with different mouth shapes for various phonemes

I would like to create an animated video that features a 2d character who speaks. I have been searching all over for a website that sells 2d characters that include the mouth shapes needed to represent the various phonemes, but I can't find any.
Does anyone know of any websites that might sell 2d characters that I can import into AE without creating any of the graphics myself?
Thanks
Paul

Hi,
If you google (under images) for "Phonemes" you will get hundreds of tables, filled with different expression and standard mouth shapes. You can then either use these to create your own versions (there will be several ways to do this), or, since you are willing to spend some money to buy the characters, why not check out http://aescripts.com/auto-lip-sync/
We use this tool extensively for our project, and it is very user-friendly. The mouths will look a lot better with this, them standard phoneme mouth shapes.
If you want to go the phoneme way for specific reasons, try this link : http://library.creativecow.net/articles/rabinowitz_aharon/lip_synch.php - it contains a downloadable character face and mouth shapes. I think you can use it, just check to make sure it is allowed.
Pierre

Need Different Selection screen for different Queries in a Workbook

Hi,
I have created a workbook with Multiple tabs in BI 7.0. Each Tab has different Queries and each query has different Selection screens (Variable Selections).
When i open the workbook and refresh it, the selection screen is appearing only for one query. All the queries are refreshed by this single selection screen, though each query has different Variable selections. What i need is a seperate selection screen i.e seperate Variable selection appearing for each queries, when i refresh each one of them.
Is it possible to do this? If anybody has tried this, help me in solving this issue. Thanks for ur time.
Regards,
Murali

Murali,
If you un-check the 'Display Duplicate Variables Only Once' this WILL solve your problem.
When you Refresh, you should be presented with a single variable selection dialog box, but it should contain an area for each Query (DataProvider) that is embedded in the Workbook.
This is the case if the queries are all on the same tab, or on different tabs.
However, if you have multiple tabs each with a query on it, each query must have it's own DataProvider. If all queries are based on the same DataProvider, it will not work as the Workbook only 'sees' one Query for which it needs variable input.
If you REALLY want multiple variable selection dialog boxes, then maybe the best way to do this is to have the queries in separate Workbooks.
If you don't want the User to have to open 5 queries manually, you could use a Macro in each Workbook that runs on opening, to open the next Workbook in the sequence.
I hope this makes sense!
Regards
Steve

How can I use Family Sharing for Store purchases if I use a different Apple ID for purchases?

A key feature of Apple's iCloud Family Sharing is the ability to share store purchases with invited family members. However, like many people, I use a different Apple ID for iCloud and Store purchases (ironically, primarily for the exact purpose of sharing among family).
Can I use iCloud Family Sharing to share purchases if I use a different Apple ID for Store (iTunes, App Store, etc.) purchases?

Sorry, let me clarify. I have two Apple IDs A and B:
A: Used for iCloud. All my calendar, mail, contacts, and other iCloud features are here. This is the ID I use as "the" iCloud on my iOS devices and OS X machines.
B: Used only for purchases, on all my devices and machines. This is what I used to log into iTunes, or to buy apps for iOS or OS X.
The issue is that the only way (currently) to set up Family Sharing is to invite from an iCloud ID (A, in my case) on an iOS 8 device. That's not the ID (B) I use for purchases. The question is whether there's a way to share those purchases given that I'm configured on all my devices with A for iCloud. (Clearly if I somehow send invitations from B, I can share purchases; but that's not the question.)
It sounds like the answer to that question is 'No'.
If that's the case, how do I invite from B? Do I have to configure an iOS device with B as the iCloud ID? My problem isn't that I want to ("willy nilly") avoid inviting form B; it's that there seems to be no way (certainly no convenient way) to do that.

Crystal Reports XI - How to pull same column value with different select...

I have a report with many (around 30) sub reports and it is giving serious performance issue. I am currently finding out a strategy to improve the performance. I see that most of the sub reports are taking same parameters from main report except for one parameter which is different for each sub report and hard coded in them and pulling up the same column value from a oracle database with a different select criterion. I am trying to find out a way using either of command/crystal formula/SQL expression which can do the same job for me and give me performance improvement. I tried to take the parameters from the main report in one sub report and mapped them to parameters being transferred to the command and then drag and drop the field for which I need to display the value but due to some reason it is not returning values when I am trying multiple commands...I need some help in selecting a strategy for this issue resolution and some guidance....Any help would be highly appreciated....

My version is 11.5.8.826. First of all I need to make it clear that I have 6 set of sub reports and each set has 5 sub reports. So if I can resolve the issue for one set, I resolve it for all. The sub reports are doing nothing but fetching a column value using a simple SQL SELECT query and appending to the right of a box in main report. The issue is that all these queries embedded into the sub reports are using same SQL except for one parameter in the "where" clause and they are fetching same column value from the database and fortunately all of them are returning same number of results. So at the end these results create a table when run. The only way I can stop using sub reports is by creating a table in the main report and use some object(formula/command/SQL expression or whatever) to fetch that column value using the same filter conditions. But please take a note that I need to use and append the same column value from a database table and use different filter conditions and append them to the right so that at the end they create a table...as long as I get the table in the output with a decent performance , anyone will be least bothered about what I used inside the report.....please ask me as many questions to get more lights on the issue....

MSS Time Approval - multiple (different) selection options for manager?

Hi all
I am setting up MSS Time Approval delegation in ERP2005 without workflow, leave request, nor portal development environment set up.
In this case, the customer needs to have multiple selection options for who to approve:
1. The manager's direct reports (standard functionality)
2. All subordinates, all levels down
3. Delegate's (manager or non-manager) view of a particular (other) manager's direct reports
3b. This might extend to a set of different delegation selections
4. Add or remove certain individuals
Now, getting 3. and 4. to work was simple using the BAdI (I think the enhancement spot is named APPR_CUST), method ...-edit_selection, but I am having difficulties with 2. and 3b. Now I am thinking along these lines, and I would greatly appreciate your input:
A. It seems that the MSS "Approve working time" app only loads the data selection at the entry into this screen (INIT command from portal), using the start perspective determined for example by the IMG for defining the approval profile <-> view. My debugging suggests that the view change from the drop down menu (CHANGE_PERSPECTIVE command) only picks a different way to present the same data set.
Could anybody please confirm or contradict this conclusion?
B. Is it possible to present the entire "Approve working time" section in MSS in multiple different copies so that they would all generate an INIT command? Or is it possible to copy and modify the entire MSS tab, resulting in an ESS tab, one MSS, one "D"SS, one "A"SS (well, not suggesting that the top manager is one, but you get the drift...) and so on?
If either of this were possible, it would be simple to make two modifications, one at the beginning of the FM called by the portal and one at the FM that returns the start perspective.
So far I have been trying to catch and alter the CHANGE_PERSPECTIVE command into an INIT in the back end, but the Time Approval functionality is a bit too complex for me to feel entirely comfortable with this approach.
Your input is much appreciated!
Kind regards
Niclas Arndt

We too are using MSS for time approval of time entered via ESS. We are on ECC 6.0 for the backend (no enhancement packs, at least not yet), currently sp stack 10 with hrsp 24, and EP 7.0 with stack 10 for the ESS/MSS business packages. We are using the standard MSS UWL functionality for the approval, so it is workflow-based in my understanding.
In other parts of MSS, the managers can see a few levels deep in the organization structure, based upon the definition we gave for their structural profiles. For instance, in the team calendar/overview, or other team information, they have a choice for multiple levels or only direct reports. However, in the time approval application, only direct reports are shown, so if a manager goes on vacation, at present the only way to cover time approvals for that manager's employees appears to be to temporarily assign a new 'chief' to that org unit, so HR involvement becomes necessary. The manager doesn't have any method for delegating the approval or other MSS authorities. We were hoping that by allowing multiple levels in the structural profile, such approvals would "roll up" to the next level, i.e. the manager's supervisor, so the next level manager could act as a backup to his/her managers on vacation. That doesn't work, however.
We have heard that a delegation feature for MSS will be available in an upcoming release, but I haven't found any information regarding whether that requires an upgrade, an enhancement pack, a later service pack level, or what or when that functionality will be available. Does anyone know anything about that?
Regards,
Matt

P.O. with different Tax codes for each line item.

Hi
I would like to know how the IV has been done for the P.O. with differnt tax codes for each line item. Since in MIRO at header level we can select only one tax code.

Hi
Raju,
It means we can post only one invoice at time i.e.for line item same taxcode is there.
e.g. If line item 10 has tax code A1, 20 has A2 then on header i can only select either A1 or A2 tax code & post invoice of that line item.

Is there a way to automatically change tabs with different times set for each tab?

I found a few add-ons that will automatically change tabs based on a configurable time. But all the tabs use the same time setting. What I need is the ability to have tabs displayed for different amounts of time. Ex, Tab 1 for 30 seconds, Tab 2 for 10 seconds, Tab 3 and 4 for 5 seconds. Ideally, I will have the ability to modify these settings as the amount of tabs and the content will change a couple times a week.
Currently I'm using Tab Slideshow with each tab displayed for 15 seconds. But it sounds like Tab Rotate and Auto Toggle Tabs essentially do the same. If there is already a solution that would be great but if not is there someone available for hire to help modify one of the existing add-ons? Thank you in advance for your time.
John

Currently Firefox don't have any options like that.
You can ask the Addon developers
*http://addons.mozilla.org/

Date difference issue for Purchase order in R/3 and APO

Hi,
I am sending the purchase order from APO to R/3. When I transfer the data through CIF and see the curresponding entries in stock requirement list in R/3, purchase order is 1 day earlier than in SCM.
However, when this purchase order is CIFed back to SCM, date appears correct in SCM ( as what it was before). Is this something because of timezone that difference in date appears in SCM and R/3.
Can someone who came across date issues for transaction data transfer between SCM and R/3 elaborate in more detail please.
Thanks,
Sanjay

Hello Somnath ,
I am also facing the same issue which sanju was facing earlier in PRs .
In APO I am not able to understand how system calculates the opening , start and end date .In my case the transportation time is 48 hrs , planned delivery time is 1 day and all calenders are 5*24 , GR proceeeing time .01 day . When I am creating PR at destination location on 06/06/2008 , 24:00:00 Hrs . System calculates the dates as follows :-
Start date -06/05/2008 , 00:45:00 , end date -06/06/2008, 24:00:00 , opening date -05/20/2008 ,23:25:00 Hrs . I tried to understand the formula given by you in your reply as Opening Date = Requirement Due Date - GR Time - Planned Delivery Time
Start Date = Requirement Due Date - GR time - Transportation Duration
End date = Requirement Date.
But I am not getting the desired results.
Could you let me know why the system is behaving in such way.I also want to know does system can create orders in such a way the opening date lies in past. If yes then can we restrict that ?
Regards ,
Mukesh
Edited by: Mukesh Kumar on Mar 9, 2008 1:59 PM

Open Item interest calculation with different exchange rate for each line

Dear All
We have a short term loan facility with our Bank. We take short term loan with bank on different terms and condition. Now user has requirement to have different interest rate for each open items depending on the posting date or any other condition. I think in SAP for one bank account only one rate is applicate for validity from date.
Can someone share his/her experience if got the same requirement from user
Thanks and Best Regards
Farhan Qaiser

Dear Ashwin,
As of overdue days are concerned there is no standard functionality available whereas there is for amount.
Better solution is that you get an ABAPer create your own functional module. That will help you in better way.

Delta Initialization with different selections issue for Purchasing.

Similar Messages

Maybe you are looking for