Deploy, IIOP connection, Unable to connect to Oracle 8i using IIOP

Hi,
I have a working JDBC connection to my Oracle 8i Enterprise DB server but when i try to establish a IIOP connection to the same server i get the following error message:
"Can4t find resource for bundle oracle.aurora.jndi.sess_iiop.Messages, key UNKNOWN_SERVICE:default"
The connection params are as follows:
JDBC4s URL jdbc:oracle:thin:@leobeln:1521:Prueba
IIOP4s URL
sess_iiop://leobeln:2481:Prueba
Same user for both connections: scott
Some ideas ?
TIA,
P

Pedro
If you haven't done so already, I suggest you try to establish the IIOP connection using JDeveloper's connection manager.
You can use Net8 assistant to check that you have a port set up to receive IIOP connections. Instructions are in the Net8 administrator's guide; in the Oracle 8.1.6 documentation it's in chapter 7, "Configuring the Listener", under the subheading "Configuring Listening Addresses for Oracle8i JServer". Check that you have a port set up to receive IIOP connections, and make sure that you're using that port number when setting up the IIOP connection in JDeveloper.
The Oracle8i documentation is available on this site - select Documentation from the menu on the left.
Blaise

Similar Messages

Lost Connection - Unable to Connect to Server

PS Touch 1.7.0 on an iPad running iOS 8.1 with a paid CC subscription. PS Touch will not sync, will not show my storage level on Creative Cloud, and when attempting to load a photo from my CC, I get "Lost Connection - Unable to Connect to Server". I tried all the suggested fixes (clearing sync databases all over the place, multiple uninstall/reinstall cycles, etc.) on this board to no avail.
Since all my other CC-enabled mobile apps work, as do the desktop apps on my Windows desktop and MacBook Pro laptop, I have to believe this is on the server side at Adobe. Of course, this being Adobe, nothing but silence. Completely unacceptable - the app may only be $10, but the connected service is $600/yr.

It is morning on November 15 and I started the Photoshop touch app to see what it's current status was. I was pleased to see that the storage level usage indicator was no longer blank. Then I turned on the sync function and watched to my horror as every project of which there are many was removed from the app. Next to my surprise all the projects were loaded into the app. Just when I began to think everything was fixed all the projects were deleted from the app. I logged on to my creative cloud account and discovered that all the projects were still in the cloud. These projects represent several years and hours and hours of work. While the creative cloud continues to contain all of the projects the app is now stuck in a mode where the app deletes all the projects and then downloads all the projects and then deletes all the projects and then downloads all the projects etc. in a continuous and never ending cycle. Needless to say this is quite nerve-racking and frustrating. Adobe support are you out there? What is going on with the Photoshop touch app and the creative cloud sync function? I thought the situation was bad before today. But Adobe somehow managed a new element in providing an unreliable service. Please, please resolve this problem.

Test Database Connection "Unable to connect to DB" using Oracle 10g Express

DB is up and running fine pls help
Connection test failed.
Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:419)
oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:538)
oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:228)
oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:521)
oracle.jdbc.pool.OracleDataSource.getPhysicalConnection(OracleDataSource.java:280)
oracle.jdbc.xa.client.OracleXADataSource.getPooledConnection(OracleXADataSource.java:482)
oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:156)
oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:101)
com.bea.console.utils.jdbc.JDBCUtils.testConnection(JDBCUtils.java:745)
com.bea.console.actions.jdbc.datasources.createjdbcdatasource.CreateJDBCDataSource.testConnectionConfiguration(CreateJDBCDataSource.java:458)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:597)
org.apache.beehive.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:870)
org.apache.beehive.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809)
org.apache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478)
org.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java:306)
org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336)
...

After installing the JDBC driver and selecting the test configuration i am getting the below erro:
Connection test failed.
Message icon - Error Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:419)
oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:538)
oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:228)
oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:521)
oracle.jdbc.pool.OracleDataSource.getPhysicalConnection(OracleDataSource.java:280)
oracle.jdbc.xa.client.OracleXADataSource.getPooledConnection(OracleXADataSource.java:482)
oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:156)
oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:101)
com.bea.console.utils.jdbc.JDBCUtils.testConnection(JDBCUtils.java:745)
com.bea.console.actions.jdbc.datasources.createjdbcdatasource.CreateJDBCDataSource.testConnectionConfiguration(CreateJDBCDataSource.java:458)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:597)
org.apache.beehive.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:870)
org.apache.beehive.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809)
org.apache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478)
org.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java:306)
org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336)
The Steps i followed to install the JDBC Driver are mentioned below:
1. JDBC Data Source Properties:
Name: testSample
JNDI Name: abc.xyz.testSample
Database Type: Oracle
Database Driver: Oracle’s (Thin XA) for Instance
connections; Versions: ... 11
Database Name: orcl
Host Name: wls-sysadm
Port: 1521
Database User Name: weblogic
Password and Confirm Password: Welcome1
Before that i started the database from start menu
and both the services
ORACLE service XE
and ORACLELISTNERSERVICE is up and running fine.
C:\Users\satish>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 04-JUN-2013 10:18
:51
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 04-JUN-2013 09:35:25
Uptime 0 days 0 hr. 43 min. 26 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\server\network\a
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\server\network\l
og\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SATISH-PC)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation=
HTTP)(Session=RAW))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XEXDB" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Can anyone pls help...urgent

No suitable driver when connect MS SQL server from Oracle 10g using JTDS

Hi,
I have developed a java servlet application connection to MS SQL using jtds-1.2.jar. I have try to deploy this application to Oracle 9ias and it works fine.
However, when I deploy the same application to Oracle 10g (10.1.2.0.2), I encounter this error - java.sql.SQLException: No suitable driver.
I have copy the jtds-1.2.jar to Ora10g/jdbc/lib, Ora10g/j2ee/home/lib and also the Ora10g/j233/OC$J_GENERAL/applications/sampleApp/sampleApp/WEB-INF/lib folder, and also setup the data source via the EM interface. The data-source.xml entry is as follows:
<data-source location="jdbc/ess" class="com.evermind.sql.DriverManagerDataSource" xa-location="jdbc/xa/essS" ejb-location="jdbc/ess" connection-driver="net.sourceforge.jtds.jdbc.Driver" username="scott" url="jdbc:jtds:sqlserver://202.xx.xx.xx:1433/sampleDB" inactivity-timeout="30" name="ess"/>
</data-sources>
Is there any configuration that I've forgotten to set?

>
I have developed a java servlet application
connection to MS SQL using jtds-1.2.jar. I have try
to deploy this application to Oracle 9ias and it
works fine.
However, when I deploy the same application to Oracle
10g (10.1.2.0.2), I encounter this error -
java.sql.SQLException: No suitable driver.
I have copy the jtds-1.2.jar to Ora10g/jdbc/lib,
Ora10g/j2ee/home/lib and also the
Ora10g/j233/OC$J_GENERAL/applications/sampleApp/sample
App/WEB-INF/lib folder, and also setup the data
source via the EM interface.
Is there any configuration that I've forgotten to set?The JAR file needs to be in a place the container can locate it correctly. This is the applib directory for your OC4J instance.
Which I believe from what you have entered is:
Ora10g/j2ee/OC4J_GENERAL/applib
There's a general JDBC 3rd party driver set of documentation here:
http://download.oracle.com/docs/cd/B14099_11/web.1012/b14012/datasrc.htm#sthref592
This is not using jtds-1.2.jar but it shows how another set of 3rd party jdbc libs are used with the server.
-steve-

Application cannot connect to second page when oracle is used as database.

Hi,
I have an application which works on MySql database. But now I need to change the database to oracle. I have installed everything required inorder for the oracle to work. I am using active record store for my application. For that I have created sessions table using
rake db:sessions:create
And I have migrated to my database using
rake db:migrate.
Then I uncommented the following line in environment.rb:
config.action_controller.session_store = :active_record_store
Then If I start my application using IE, First page is shown, when I click on the second page link,
I got HTTP 500 Internal Server Error saying
The website cannot display the page
HTTP 500
Most likely causes:
The website is under maintenance.
The website has a programming error.
What you can try:
Refresh the page.
Go back to the previous page.
More information
I am unable to understand what the problem is. When I comment the line config.action_controller.session_store = :active_record_store application works, but the sessions table is not updated. when I use MySql as my database, everything works fine.
Can someone please help me with the solution? what may be the mistake am doing?

Please provide more information about this issue.
Are you using oracle_enhanced adapter? (activerecord-oracle_enhanced-gem)
Which Rails version are you using?
Can you look in your log file what exception you are getting? (if running in development mode then it should be in log/development.log)
Raimonds

TS1398 Wifi connection unable to connect - existing network

My iPad lost network connection and will not sign back into the network. I have tried everything on TS 1398 and it will sign onto other networks, but no longer my home network. I know my network password and can get my other devices, including another iPad signed on. Thanks for any help you can offer.

Try this:
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

Ipad Mini - Wifi Connection -Unable to connect

Ipad Mini with IOS 6.0.2 software current lost WIFI connection on Airport Extreme Base and now does not connect. See network connection to network, but looks like it is searching after password entered. Tried the guest network connection and does the same. It was connecting properly once I first activated ipad mini, but now does not connect at all. I tried rest of the ipad mini and does the same thing. Other Apple devices have no issues with connection to AEB. --- Need help with this.

Try this:
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

Unable to insert into oracle db using times ten

I have a times ten 6.0 installation on my m/c connected to an oracle 10.2.0.2 database. The database is a remote database. My application is deployed to oracle application server (10.1.3.1 SOA). I am getting the following SQLException when I try to insert.the first row.
java.sql.SQLException: [TimesTen][TimesTen 6.0.4 ODBC Driver][TimesTen]TT5105: OCI initialization failed. -- file "bdbEnv.c", lineno 275, procedure "ttBDbEnvAlloc"
My env is as follows
OS = Windows 2000
DataSource = User DSN
First Connection
Permanent Data Store = 100
Temporary Data Store = 50
Connections = 20
Synchronous write through cache
I tried a select on the table before insert and it worked. Using ttisql I can insert into this table without any problem. Using a standalone java program I am able to insert data into this table. But from within an appserver I am facing this issue.
Thanks in advance for any help.
Regards,
Mahesh.

Jimmyb,
Are you logged in as the user that owns that table?
Yes.
If yes, then there are no triggers on this table.
That is true.
You will need to populate the ID column with your insert statement.
Just did that.
Usually, the sequence is very similar to the table name.
Yes I tried few of them in my sql query and it said "sequence cannot be found"
Isn't there some way that it will list the name of the sequence currently being used in a table?

After Firefox updated last night, I am no longer able to use it. "Unable to connect" I have added it back through the firewall, nothing works. Help!

Starting last night, after an update, I am no longer able to use Firefox.
"Problem loading page"
"Unable to connect"
Unable to connect"
Firefox can't establish a connection to the server at.....
I have tried various things, even uninstalled and re-installed, took it out of the firewall, and added it back in. But nothing is working.
Please help!
Thank You
Mara

Hello Mara, see if the next is helpful : [https://support.mozilla.org/en-US/kb/firefox-cant-load-websites-other-browsers-can Firefox can't load websites but other browsers can]
also, try to boot the computer in [http://windows.microsoft.com/en-hk/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows Safe mode with network support] (press F8 on the boot screen) and check firefox again.
(If works in Windows Safe mode then probably you have problem with other software, like security software or maybe a system driver, that is running on your computer).
thank you

How to connect Oracle database using C/C++ on Mac OS X PPC G4, XCode 2.4.1?

Hi All,
How to connect the Oracle database using C/C++ on Mac OS X? I have used Instant Client library "instantclient-basic-macosx-10.1.0.3" provided by the Oracle but could not be success. I'm using PowerPC G4, Mac OS X 10.4.9, and XCode version 2.4.1.
Specially Mr Oscar Armanini has done this in C on Mac OS X. Please let me know. I would be very thankful to you.
Thanks,
Ghufran

Hi Ghufran
there are two Metalink Notes on using Instant Client with PowerPc Mac:
https://metalink.oracle.com/metalink/plsql/showDoc?db=NOT&id=316497.1
How to Install, Configure and Test Oracle 10g Instant Client Basic,
SQL*Plus and SDK Packages for Mac OS X
(Runs OCI sample code - cdemo81.c)
https://metalink.oracle.com/metalink/plsql/showDoc?db=NOT&id=332588.1
How to Install, Configure and Test Oracle 10g Instant Client Basic,
SQL*Plus and SDK Packages for Mac OS X
(Runs OCCI sample code - occidml.cpp)
The first Metalink Note uses an OCI examples and it is pasted here below,
in case you don't have a Metalink ID.
The second Metalink Note uses an OCCI example.
I have never used Instant Client (neither on Os X or on other platform),
but I was successful on compiling C programs (no GUI involved) using the
Full Client installed on my PowerBook G4.
I'm a DBA, but I was a developer years ago (about when Oracle 7.3
was considered a giant step forward): I installed the Oracle 10.1 db
(a complicated job for a developer) and I got the Full Client
installed as well, for free, so I was happy to compile one of the demo C sources
(those that you can find in the Oracle Pro*C manuals:
by the way, Oracle Pro*C manuals are really worth reading).
Good luck
Oscar
Applies to: Oracle Server - Enterprise Edition - Version: 10.1.0.3
Apple Macintosh PowerPC
Goal
This article will show you how to install and configure your 10g Instant Client (IC) Software for the Mac.
It will install the following packages:
the Basic package
the SQL*Plus package and
the SDK package
and then test its connectivity to an Oracle database using SQL*Plus.
It will also show you how to setup and test a sample program, cdemo81.c, that uses the Oracle Call Interface (OCI)
to connect to the database.
The sample program is located under the <Instant_Client>/sdk/demo directory.
Solution1. Download the following three (3) files from the Oracle Technology Network (OTN) website.
You will need an account to do this.
Macintosh OS X 10g Instant Client Software
a. instantclient-basic-macosx-10.1.0.3.zip (32,395,622 bytes)
b. instantclient-sqlplus-macosx-10.1.0.3.zip (326,740 bytes)
c. instantclient-sdk-macosx-10.1.0.3.zip (293,913 bytes)
NOTE: The above three (3) files will be updated as new patches are released for the 10g Instant Client software. 10.1.0.3 or later versions (10.1.0.x) of these files may be used similarly with this article.
2. Save the following text into a file called tnsnames.ora:
# If you receive an
# ORA-12154: TNS:could not resolve the connect identifier specified
# error when running the setup script and attempting to connect to Oracle
# from SQL*Plus then the name of your SERVICE NAME (i.e. ORCL) may require
# that you include the DOMAIN (i.e. US.ORACLE.COM) in order to connect successfully.
# To obtain the DOMAIN of your environment, type "hostname" from your shell
# and it should report this information back to you. Configure your SERVICE
# NAME to look like Example 2.
# Example 1
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = database_machine.us.oracle.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SID = orcl)
# Example 2
#ORCL.US.ORACLE.COM =
# (DESCRIPTION =
# (ADDRESS = (PROTOCOL = TCP)(HOST = database_machine.us.oracle.com)(PORT = 1521))
# (CONNECT_DATA =
# (SERVER = DEDICATED)
# (SID = orcl)
3. Save the following text into a file called sqlplus_script.sql:
SELECT user FROM dual;
SELECT sysdate FROM dual;
SELECT 'successful ' AS TEST_RESULTS FROM dual;
exit;
4. Save the following text into a file called setup1:
# ===========================================
# MAC OS X INSTANT CLIENT 10g SCRIPT - SETUP1
# ===========================================
# DESCRIPTION
# ===========
# This script will install and configure your 10g Instant Client (IC) Software
# for the Mac. It will install the Basic, SQL*Plus and SDK (OCI/OCCI) packages
# and then test its connectivity to an Oracle database using SQL*Plus.
# Once this script has completed, you will need to run the script SETUP2 to build
# and run the CDEMO81.C sample application located under the <IC>/sdk/demo folder
# in your newly installed Instant Client home.
# NOTE: In order for this script to run successfully, you MUST perform any
# necessary actions required under the SETUP section below.
# SETUP
# =====
# (1) You MUST be in a directoy with ALL of the following files
# BEFORE running this script:
# 1 - instantclient-basic-macosx-10.1.0.3.zip
# 2 - instantclient-sqlplus-macosx-10.1.0.3.zip
# 3 - instantclient-sdk-macosx-10.1.0.3.zip
# 4 - tnsnames.ora (configured properly)
# 5 - sqlplus_script.sql (connectivity test)
# 6 - setup1 (this file)
# 7 - setup2 (will run this file later)
# (2) Edit the TNSNAMES.ORA file and update it with the necessary information
# to connect to a database on your network. Be sure to note the comments
# in this file. You will have to change the following information:
# SERVICE NAME (orcl or orcl.us.oracle.com)
# HOST (database_machine.us.oracle.com)
# PORT (1521)
# SID (orcl)
# (3) Go to the end of this scrip and modify the following line:
# ./instantclient10_1/sqlplus scott/tiger@orcl @sqlplus_script.sql
# Replace "orcl" with the SERVICE NAME you used in step (2) above.
# (4) To run this script use the command: ". setup1"
# BEGINNING OF SCRIPT
# output this file to your shell
echo
echo MAC OS X INSTANT CLIENT 10g SCRIPT - SETUP1
echo
#more setup1
# output the TNSNAMES.ORA file to your shell
echo TNSNAMES.ORA FILE
echo
more tnsnames.ora
# remove the instantclient10_1 directory should it exist
echo
echo CHECKING FOR instantclient10_1 DIRECTORY...
echo WILL REMOVE DIRECTORY IF IT ALREADY EXISTS
echo
rm -d -f -R instantclient10_1
# extract the instantclient software (basic, sql*plus & sdk)
echo
echo
echo INSTALLING SOFTWARE...
echo
echo BASIC
echo
unzip instantclient-basic-macosx-10.1.0.3.zip
echo
echo SQL*PLUS
echo
unzip instantclient-sqlplus-macosx-10.1.0.3.zip
echo
echo SDK
echo
unzip instantclient-sdk-macosx-10.1.0.3.zip
# set the following environment variables
# Uncomment if you want a way to find the Instant Client (IC) home quickly
#export IC=$PWD/instantclient10_1
# Dynamic Library path required to use the Instant Client (IC) software
export DYLD_LIBRARY_PATH=$PWD/instantclient10_1
# TNS_ADMIN is required if using the TNSNAMES.ORA file (recommended)
export TNS_ADMIN=$PWD/instantclient10_1
# display the modified environment variables
echo
echo SETTING ENVIRONMENT VARIABLES
echo
echo DYLD_LIBRARY_PATH
echo $DYLD_LIBRARY_PATH
echo
echo TNS_ADMIN
echo $TNS_ADMIN
# display all environment variables
#echo
#echo ALL ENVIRONMENT VARIABLES
#echo
#env
# copy the TNSNAMES.ORA to the instantclient directory
echo
echo COPYING TNSNAMES.ORA TO INSTANT CLIENT [IC] DIRECTORY
echo
cp tnsnames.ora ./instantclient10_1/tnsnames.ora
# list the contents of the IC directory to see what has been installed
echo
echo INSTANT CLIENT [IC] DIRECTORY
echo
ls ./instantclient10_1
echo
# SQL*Plus Connectivity Test
# To connect to the database specified in your TNSNAMES.ORA file change the
# SERVICE NAME (i.e. orcl) below to the name of the entry in your TNSNAMES.ORA
# file designating the specific database in which you want to connect to
echo
echo SQL*PLUS CONNECTIVITY TEST
./instantclient10_1/sqlplus scott/tiger@orcl @sqlplus_script.sql
# Alternately, you can connect from SQL*Plus to Oracle without using a TNSNAMES.ORA
# file. You can embed the NAME-VALUE pair of the SERVICE NAME from the TNSNAMES.ORA
# file directly into the connection string making sure to use the proper HOST, PORT
# and SID like so:
#./instantclient10_1/sqlplus scott/tiger@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=database_machine.us.oracle.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))
5. Save the following text into a file called setup2:
# ===========================================
# MAC OS X INSTANT CLIENT 10g SCRIPT - SETUP2
# ===========================================
# DESCRIPTION
# ===========
# This script will build and run the OCI sample application CDEMO81.C inside
# your Instant Client (IC) software located under the <IC>/sdk/demo folder.
# NOTE: In order for this script to run successfully
# (A) you MUST have already run the script SETUP1 successfully
# and
# (B) you MUST perform any necessary actions required under the SETUP
# section below.
# SETUP
# =====
# (1) You need to edit the CDEMO81.C application PRIOR to running this script to
# change the connection information. By default, the application will attempt
# to connect as user SCOTT with password TIGER to a local Oracle database using
# the BEQ-LOCAL network protocol. This will not work.
# (A) You need to make sure you have the SCOTT/TIGER schema created in your database.
# If not, have your DBA create it by running the script "SCOTT.SQL" from your
# <ORACLE_HOME>/rdbms/admin folder.
# (B) You need to modify the CDEMO81.C application to connect to the database
# you have configured inside your TNSNAMES.ORA file.
# (i) Open the CDEMO81.C file located under the <IC>/sdk/demo folder.
# (ii) Find the following line of code:
# (void) OCIServerAttach( srvhp, errhp, (text *)"", strlen(""), 0);
# and change the two empty strings to the SERVICE NAME you are using like so
# (void) OCIServerAttach( srvhp, errhp, (text *)"ORCL", strlen("ORCL"), 0);
# (iii) Save the file.
# (2) You MUST be in the initial directory where you copied all of the files listed
# in script SETUP1. In this same location you will find SETUP2. Run SETUP2 from
# this location.
# (3) To run this script use the command: ". setup2"
# BEGINNING OF SCRIPT
# output this file to your shell
echo
echo MAC OS X INSTANT CLIENT 10g SCRIPT - SETUP2
echo
#more setup2
# output the TNSNAMES.ORA file to your shell
echo TNSNAMES.ORA FILE
echo
more tnsnames.ora
# output the username, password and service name from CDEMO81.C file to your shell
echo
echo USERNAME, PASSWORD AND SERVICE NAME INFO FROM YOUR OCI cdemo81.c FILE
echo
#more ./instantclient10_1/sdk/demo/cdemo81.c
grep -i "*username" ./instantclient10_1/sdk/demo/cdemo81.c
grep -i "*password" ./instantclient10_1/sdk/demo/cdemo81.c
grep -i OCIServerAttach ./instantclient10_1/sdk/demo/cdemo81.c
# display the required environment variables
#env
echo
echo REPORTING REQUIRED ENVIRONMENT VARIABLES
echo
echo DYLD_LIBRARY_PATH
echo $DYLD_LIBRARY_PATH
echo
echo TNS_ADMIN
echo $TNS_ADMIN
# move to the sdk/demo directory
cd ./instantclient10_1/sdk/demo
echo
echo CHANGING TO [IC]/SDK/DEMO DIRECTORY
echo
ls
# run demo application
echo
echo ATTEMPTING TO RUN APPLICATION
echo
echo BUILDING APPLICATION USING PROVIDED MAKE FILE, [IC]/sdk/demo/demo.mk...
echo
make -f demo.mk
echo
echo
echo INSTANT CLIENT [IC] DIRECTORY...
echo
ls ../..
echo
echo CREATING links FOR REQUIRED LIBRARIES IN INSTANT CLIENT [IC] FOLDER...
echo
echo - libclntsh.dylib
echo - libocci.dylib
ln ../../libclntsh.dylib.10.1 ../../libclntsh.dylib
ln ../../libocci.dylib.10.1 ../../libocci.dylib
echo
echo INSTANT CLIENT [IC] DIRECTORY WITH links CREATED...
echo
ls ../..
echo
echo
echo EXECUTING APPLICATION...
echo
cdemo81
echo
echo
# TROUBLE-SHOOTING
# If you receive the following error messages:
# Error - ORA-24327: need explicit attach before authenticating a user
# Error - ORA-03114: not connected to ORACLE
# Then you did not modify the CDEMO81.C application with proper SERVICE NAME
# information. See step 1B under the SETUP section in this script to resolve
# this error.
6. Take all seven (7) files and move them into the same directory on your OS where you want to install the Instant Client software from:
1 - instantclient-basic-macosx-10.1.0.3.zip
2 - instantclient-sqlplus-macosx-10.1.0.3.zip
3 - instantclient-sdk-macosx-10.1.0.3.zip
4 - tnsnames.ora
5 - sqlplus_script.sql
6 - setup1
7 - setup2
7. Open the file tnsnames.ora. Be sure to review the comments in this file. You will have to change the following information to connect to a database on your network:
SERVICE NAME (orcl or orcl.us.oracle.com)
HOST (database_machine.us.oracle.com)
PORT (1521)
SID (orcl)
Save the file.
8. Open the file setup1, go to the end of this script and modify the following line:
./instantclient10_1/sqlplus scott/tiger@orcl @sqlplus_script.sql
Replace orcl with the SERVICE NAME you used in Step 7 above. Save the file.
9. You are now ready to install the 10g Instant Client software for Mac OS X. From the location where your seven (7) files reside, issue the following command:
[macosx]/oracle> . setup1
NOTE: Be sure to include the period "." and a space " " before the word "setup1" so all environment variables persist for the current session.
This will install the Instant Client Basic and SQL*Plus software and connect to the database specified in the tnsnames.ora file.
10. Here is the sample output of a successful execution of the setup1 script:
[macosx]/oracle> . setup1
MAC OS X INSTANT CLIENT 10g SCRIPT - SETUP1
TNSNAMES.ORA FILE
# If you receive an
# ORA-12154: TNS:could not resolve the connect identifier specified
# error when running the setup script and attempting to connect to Oracle
# from SQL*Plus then the name of your SERVICE NAME (i.e. ORCL) may require
# that you include the DOMAIN (i.e. US.ORACLE.COM) in order to connect successfully.
# To obtain the DOMAIN of your environment, type "hostname" from your shell
# and it should report this information back to you. Configure your SERVICE
# NAME to look like Example 2.
# Example 1
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = gbednars-pc.us.oracle.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SID = orcl)
# Example 2
#ORCL.US.ORACLE.COM =
# (DESCRIPTION =
# (ADDRESS = (PROTOCOL = TCP)(HOST = gbednars-pc.us.oracle.com)(PORT = 1521))
# (CONNECT_DATA =
# (SERVER = DEDICATED)
# (SID = orcl)
CHECKING FOR instantclient10_1 DIRECTORY...
WILL REMOVE DIRECTORY IF IT ALREADY EXISTS
INSTALLING SOFTWARE...
BASIC
Archive: instantclient-basic-macosx-10.1.0.3.zip
inflating: instantclient10_1/classes12.jar
inflating: instantclient10_1/libclntsh.dylib.10.1
inflating: instantclient10_1/libnnz10.dylib
inflating: instantclient10_1/libocci.dylib.10.1
inflating: instantclient10_1/libociei.dylib
inflating: instantclient10_1/libocijdbc10.dylib
inflating: instantclient10_1/ojdbc14.jar
SQL*PLUS
Archive: instantclient-sqlplus-macosx-10.1.0.3.zip
inflating: instantclient10_1/README_IC.htm
inflating: instantclient10_1/glogin.sql
inflating: instantclient10_1/libsqlplus.dylib
inflating: instantclient10_1/sqlplus
SDK
Archive: instantclient-sdk-macosx-10.1.0.3.zip
creating: instantclient10_1/sdk/
creating: instantclient10_1/sdk/demo/
inflating: instantclient10_1/sdk/demo/cdemo81.c
inflating: instantclient10_1/sdk/demo/demo.mk
inflating: instantclient10_1/sdk/demo/occidemo.sql
inflating: instantclient10_1/sdk/demo/occidemod.sql
inflating: instantclient10_1/sdk/demo/occidml.cpp
creating: instantclient10_1/sdk/include/
inflating: instantclient10_1/sdk/include/nzerror.h
inflating: instantclient10_1/sdk/include/nzt.h
inflating: instantclient10_1/sdk/include/occi.h
inflating: instantclient10_1/sdk/include/occiAQ.h
inflating: instantclient10_1/sdk/include/occiCommon.h
inflating: instantclient10_1/sdk/include/occiControl.h
inflating: instantclient10_1/sdk/include/occiData.h
inflating: instantclient10_1/sdk/include/occiObjects.h
inflating: instantclient10_1/sdk/include/oci.h
inflating: instantclient10_1/sdk/include/oci1.h
inflating: instantclient10_1/sdk/include/oci8dp.h
inflating: instantclient10_1/sdk/include/ociap.h
inflating: instantclient10_1/sdk/include/ociapr.h
inflating: instantclient10_1/sdk/include/ocidef.h
inflating: instantclient10_1/sdk/include/ocidem.h
inflating: instantclient10_1/sdk/include/ocidfn.h
inflating: instantclient10_1/sdk/include/ociextp.h
inflating: instantclient10_1/sdk/include/ocikpr.h
inflating: instantclient10_1/sdk/include/ocixmldb.h
inflating: instantclient10_1/sdk/include/odci.h
inflating: instantclient10_1/sdk/include/oratypes.h
inflating: instantclient10_1/sdk/include/ori.h
inflating: instantclient10_1/sdk/include/orid.h
inflating: instantclient10_1/sdk/include/orl.h
inflating: instantclient10_1/sdk/include/oro.h
inflating: instantclient10_1/sdk/include/ort.h
inflating: instantclient10_1/sdk/include/xa.h
SETTING ENVIRONMENT VARIABLES
DYLD_LIBRARY_PATH
/oracle/instantclient10_1
TNS_ADMIN
/oracle/instantclient10_1
COPYING TNSNAMES.ORA TO INSTANT CLIENT [IC] DIRECTORY
INSTANT CLIENT [IC] DIRECTORY
README_IC.htm libocci.dylib.10.1 sdk/
classes12.jar libociei.dylib* sqlplus*
glogin.sql libocijdbc10.dylib* tnsnames.ora
libclntsh.dylib.10.1* libsqlplus.dylib*
libnnz10.dylib ojdbc14.jar
SQL*PLUS CONNECTIVITY TEST
SQL*Plus: Release 10.1.0.3.0 - Production on Fri Aug 19 15:26:08 2005
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
USER
SCOTT
SYSDATE
19-AUG-05
TEST_RESULTS
successful
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
IF THE SQL*PLUS CONNECTIVITY TEST WAS SUCCESSFUL
READ SETUP2 TO CONFIGURE AND RUN THE OCI cdemo81.c SAMPLE
[macosx]/oracle>
11. Once you have obtained a successful execution of the setup1 script, you are ready to configure cdemo81.c to connect to the database you have configured inside your tnsnames.ora file.
Open the cdemo81.c file located under the <Instant_Client>/sdk/demo folder. Find the following line of code:
(void) OCIServerAttach( srvhp, errhp, (text *)"", strlen(""), 0);
Change the two (2) empty strings to the SERVICE NAME you used in Step 7 above.
(void) OCIServerAttach( srvhp, errhp, (text *)"ORCL", strlen("ORCL"), 0);
Save the file.
12. You are now ready to run cdemo81.c. You MUST issue the following command from the initial directory where you copied all of the files in Step 6:
[macosx]/oracle> . setup2
NOTE: Be sure to include the period "." and a space " " before the word "setup2" so all environment variables persist for the current session.
This script will configure your environment, build and run the OCI sample code connecting to the database specified in the tnsnames.ora file.
13. Here is the sample output of a successful execution of the setup2 script:
[macosx]/oracle> . setup2
MAC OS X INSTANT CLIENT 10g SCRIPT - SETUP2
TNSNAMES.ORA FILE
# If you receive an
# ORA-12154: TNS:could not resolve the connect identifier specified
# error when running the setup script and attempting to connect to Oracle
# from SQL*Plus then the name of your SERVICE NAME (i.e. ORCL) may require
# that you include the DOMAIN (i.e. US.ORACLE.COM) in order to connect successfully.
# To obtain the DOMAIN of your environment, type "hostname" from your shell
# and it should report this information back to you. Configure your SERVICE
# NAME to look like Example 2.
# Example 1
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = gbednars-pc.us.oracle.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SID = orcl)
# Example 2
#ORCL.US.ORACLE.COM =
# (DESCRIPTION =
# (ADDRESS = (PROTOCOL = TCP)(HOST = gbednars-pc.us.oracle.com)(PORT = 1521))
# (CONNECT_DATA =
# (SERVER = DEDICATED)
# (SID = orcl)
USERNAME, PASSWORD AND SERVICE NAME INFO FROM YOUR OCI cdemo81.c FILE
static text username = (text ) "SCOTT";
static text password = (text ) "TIGER";
(void) OCIServerAttach( srvhp, errhp, (text *)"ORCL", strlen("ORCL"), 0);
REPORTING REQUIRED ENVIRONMENT VARIABLES
DYLD_LIBRARY_PATH
/oracle/instantclient10_1
TNS_ADMIN
/oracle/instantclient10_1
CHANGING TO [IC]/SDK/DEMO DIRECTORY
cdemo81.c* demo.mk occidemo.sql occidemod.sql occidml.cpp
ATTEMPTING TO RUN APPLICATION
BUILDING APPLICATION USING PROVIDED MAKE FILE, [IC]/sdk/demo/demo.mk...
rm -rf SunWS_cache
rm -rf ../../libclntsh.dylib
rm -rf ../../libocci.dylib
rm -rf cdemo81 cdemo81.o occidml occidml.o
/usr/bin/gcc -c -I../include -I/rdbms/public/ -I/oracore/include -I/oracore/publ
ic -I/oracore/port/include -I/nlsrtl/include -I/plsql/public -I/plsql/include -I
/network/public -I/network/include -I/otrace/public -I/otrace/include/ -I/precom
p/public -I/precomp/include/ -I/slax/include -I/ordts/public -I/ordts/include -I
/javavm/include -I/javavm/include/osds/unix/solaris -I/ctx/public -I/ordvir/publ
ic -I/ordvir/include -idirafter . -g -DRE_ENTRANT -DOCCI_NO_WSTRING=1 -DMAC_O
SX -D_GNU_SOURCE -DSLTS_ENABLE -DSLMXMX_ENABLE -D_REENTRANT -DNS_THREADS -D_BCER
T_API_ -DRSA_PLATFORM=RSA_PLATFORM_MAC_PPC_DARWIN -DNTEV_USE_POLL -DNTEV_USE_GE
NERIC -DNET_USE_LDAP -DOCCI cdemo81.c
ln ../../libclntsh.dylib.10.1 ../../libclntsh.dylib
ln ../../libocci.dylib.10.1 ../../libocci.dylib
/usr/bin/g++ -o cdemo81 cdemo81.o -L../../ -locci -lclntsh -lpthread
rm -rf ../../libclntsh.dylib
rm -rf ../../libocci.dylib
/usr/bin/g++ -c -I../include -I/rdbms/public/ -I/oracore/include -I/oracore/publ
ic -I/oracore/port/include -I/nlsrtl/include -I/plsql/public -I/plsql/include -I
/network/public -I/network/include -I/otrace/public -I/otrace/include/ -I/precom
p/public -I/precomp/include/ -I/slax/include -I/ordts/public -I/ordts/include -I
/javavm/include -I/javavm/include/osds/unix/solaris -I/ctx/public -I/ordvir/publ
ic -I/ordvir/include -idirafter . -g -DRE_ENTRANT -DOCCI_NO_WSTRING=1 -DMAC_O
SX -D_GNU_SOURCE -DSLTS_ENABLE -DSLMXMX_ENABLE -D_REENTRANT -DNS_THREADS -D_BCER
T_API_ -DRSA_PLATFORM=RSA_PLATFORM_MAC_PPC_DARWIN -DNTEV_USE_POLL -DNTEV_USE_GE
NERIC -DNET_USE_LDAP -DOCCI occidml.cpp
In file included from ../include/occi.h:43,
from occidml.cpp:11:
../include/occiData.h:411: warning: use of `long double' type; its size may
change in a future release
../include/occiData.h:411: warning: (Long double usage is reported only once
for each file.
../include/occiData.h:411: warning: To disable this warning, use
-Wno-long-double.)
ln ../../libclntsh.dylib.10.1 ../../libclntsh.dylib
ln ../../libocci.dylib.10.1 ../../libocci.dylib
/usr/bin/g++ -o occidml occidml.o -L../../ -locci -lclntsh -lpthread
rm -rf ../../libclntsh.dylib
rm -rf ../../libocci.dylib
INSTANT CLIENT [IC] DIRECTORY...
README_IC.htm libocci.dylib.10.1 sdk/
classes12.jar libociei.dylib* sqlplus*
glogin.sql libocijdbc10.dylib* tnsnames.ora
libclntsh.dylib.10.1* libsqlplus.dylib*
libnnz10.dylib ojdbc14.jar
CREATING links FOR REQUIRED LIBRARIES IN INSTANT CLIENT [IC] FOLDER...
- libclntsh.dylib
- libocci.dylib
INSTANT CLIENT [IC] DIRECTORY WITH links CREATED...
README_IC.htm libnnz10.dylib libsqlplus.dylib*
classes12.jar libocci.dylib ojdbc14.jar
glogin.sql libocci.dylib.10.1 sdk/
libclntsh.dylib* libociei.dylib* sqlplus*
libclntsh.dylib.10.1* libocijdbc10.dylib* tnsnames.ora
EXECUTING APPLICATION...
Enter employee name (or CR to EXIT): LARRY
Enter employee job: CEO
Enter employee salary: 10000
Enter employee dept: 40
LARRY added to the OPERATIONS department as employee number 7974
Enter employee name (or CR to EXIT):
Exiting...
[macosx]/oracle/instantclient10_1/sdk/demo>
14. If you have any problems running this script please open a Service Request (SR) with Oracle Support for further assistance and be sure to upload the output from the script to the SR.
ReferencesNote
332588.1 - How to Install, Configure and Test Oracle 10g Instant Client Basic, SQL*Plus and SDK Packages for Mac OS X (Runs OCCI sample code - occidml.cpp)
Errors
ORA-3114 "not connected to ORACLE"
ORA-24327 need explicit attach before authenticating a user
ORA-12154 "TNS:could not resolve service name"

Database connectivity in struts ( EJB) with Oracle 9

hi,
We are developing a Banking application using Struts & EJB, & I need to use Oracle 9 as a database. Could anyone please let me know, the professional way of connecting this application to the oracle database using Struts and EJB. A good example will help me a lot, so please give me example code also.
Thanks a lot in advance.
Raghav

Hello,
For keeping the standby database on same HOST....it does seems to be great...i must be on separate box....may be on different network...i believe you would be using it for some failiover purpose...Isn't it.
For Unix it is quite easy..you may implement like this...The Issue which you are referring may be because of wrong Oracle Home or SID....(i'm not very much sure..) You may try following steps:
1. Create a separate Unix A/c and set ORACLE_HOME and ORACLE_SID relevant to your StandBy Database. I believe the Home would be same whereas SID would be your standby databse.
2. Take a Cold Backup of All your database files from Production.
3. Copy these files on separate mount points for standby Db. Put them all to relevant directory and be sure to set the Group of all these files as "SYSDBA" This is Must.
4. And then modify your INIT.ORA file i.e. InitSID.ora file accordingly and put the file in ORACLE_HOME
5. Login to Newly created Unix A/c. Check whether ORACLE_SID is set ot not to your standby database instance.
6. Login to sys as sysdba and start up the database. It will by default would try to check & do for your relevant Oracle SID for this profile...
HTH
Regards,
Kamesh Rastogi

Cant go through the setup process...unable to connect

I just recently purchased a z10 from someone, and because i didnt have the device password, i did a security wipe. after the security wipe, the phone isnt giving me the option to connect to a network! (message that i got is below)
Unable to connect
Unable to connect to a network.
Please try changing your settings
<<settings>>
Please assist me as soon as you can...

Hi and Welcome to the Community!
You didn't say...what type of network? WiFi? Carrier data network? Something else? You should be able to configure without the SIM inserted as well, via WiFi only, if you simply bypass the carrier network screen.
Or, the OS may be corrupt somehow, and a reload might be needed. You can find instructions here:
http://supportforums.blackberry.com/t5/General-BlackBerry-10-Smartphone/How-to-Reload-your-Blackberr...
And here:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Unable to connect SQL Developer 4.0.2 to Oracle REST Data Services 2.0.7 (Apex Listener)

Background
1. Weblogic 10.3.6.0 running on Oracle Linux 6.5 with Oracle JRockit(R) (build R28.2.3-13-149708-1.6.0_31-20120327-1523-linux-x86_64, compiled mode)
2. Oracle Apex 4.2.1
3. Apex Listener 1.1.3
4. Apex and Apex Listener running on the Weblogic box above
5. SQL Developer 4.0.2 running on Windows 7 64 bit / Java 1.7.0_55
Updated Apex to 4.2.5 via p17966818_425_Generic.zip patchset. Apex environment running fine as do all applications via Listener 1.1.3
Updated Oracle Listener to the latest version of Oracle REST Data Services 2.0.7
Current Status
Apex Applications and RESTful services are running fine.
Problem
Unable to connect SQL Developer 4.0.2 to Oracle REST Data Services 2.0.7
Error message in SQL Developer - Cannot connect to DEV. HTTP/1.1 403 Target service not allowed
Additional Information
Steps followed -
1. The oracle users APEX_LISTENER and APEX_REST_PUBLIC_USER did not exist, so I ran apex_rest_config.sql from the APEX 2.4.1 patchset whilst connected sys as sysdba and provided the same password as APEX_PUBLIC_USER for both users.
2. I also ran
grant insert, delete on APEX_040200.wwv_flow_rt$privilege_groups to APEX_LISTENER;
alter session set current_schema = APEX_LISTENER;
create or replace synonym wwv_flow_rt$privilege_groups for APEX_040200.wwv_flow_rt$privilege_groups;
as per Oracle SQL Developer User's Guide Release 4.0
3. copied ords.war to apex.war
4. java -jar apex.war configdir /u01/app/oracle/admin/apex/devdomain1/
5. java -jar apex.war
Jun 5, 2014 5:15:31 PM oracle.dbtools.common.config.file.ConfigurationFolder logConfigFolder
INFO: Using configuration folder: /u01/app/oracle/admin/apex/devdomain1/apex
Enter the name of the database server [localhost]:dbservername
Enter the database listen port [1521]:
Enter 1 to specify the database service name, or 2 to specify the database SID [1]:1
Enter the database service name:dbservicename
Enter the database user name [APEX_PUBLIC_USER]:
Enter the database password for APEX_PUBLIC_USER:
Confirm password:
Enter 1 to enter passwords for the RESTful Services database users (APEX_LISTENER,APEX_REST_PUBLIC_USER), 2 to use the same password as used for APEX_PUBLIC_USER or, 3 to skip this step [1]:2
Jun 5, 2014 5:16:52 PM oracle.dbtools.common.config.file.ConfigurationFiles update
INFO: Updated configurations: defaults, apex, apex_al, apex_rt
Enter 1 if you wish to start in standalone mode or 2 to exit [1]:2
6. java -jar apex.war user adminlistener "Listener Administrator"
Jun 5, 2014 5:18:52 PM oracle.dbtools.common.config.file.ConfigurationFolder logConfigFolder
INFO: Using configuration folder: /u01/app/oracle/admin/apex/devdomain1/apex
Enter a password for user adminlistener:
Confirm password for user adminlistener:
Jun 6, 2014 5:19:12 PM AM oracle.dbtools.standalone.ModifyUser execute
INFO: Created user: adminlistener in file: /u01/app/oracle/admin/apex/devdomain1/apex/credentials
7. Updated the defaults.xml file
Added
<entry key="apex.security.user.roles">RESTful Services</entry>
<entry key="apex.security.developer.roles">OAuth2 Client Developer, SQL Developer</entry>
as per Oracle SQL Developer User's Guide Release 4.0
Changed
<entry key="debug.printDebugToScreen">false</entry>
to
<entry key="debug.printDebugToScreen">true</entry>
for RESTful debugging
Added
<entry key="security.verifySSL">false</entry>
to use OAuth2 in Non HTTPS Environment as per Oracle® REST Data Services Installation and Configuration Guide, Release 2.0
8. Deleted the Admin and Manager Roles within the apex application deployment which were part of the Apex Listener 1.1.3 install
9. Deployed the apex.war in weblogic
10. Stopped and started the weblogic server to which apex.war was deployed
11. In SQL Developer, View, RESTful Services. In the RESTful services windows hit connect, Create a new connection,
Connection Name DEV
Username adminlistener
selected http protocol
Hostname weblogicservername
Port 7250
Server Path /apex
Workspace (blank)
On the Authentication dialog
Username adminlistener
Password passwordsuppliedabove in step 6
Response is a dialog box titled Authentication Failed
message - Cannot connect to DEV. HTTP/1.1 403 Target service not allowed
NOTHING UNUSUAL IN ANY OF THE WEBLOGIC LOG FILES, EXCEPT THAT IT STATES
'Oracle REST Data Services version : 2.0.6.27.18.06' when I've installed 2.0.7.
Any help much appreciated

Further to the above post, I thought I'd simplify my Apex Listener install just to see if I can connect to it via SQL Developer
So downloaded the latest version 2.0.8 and decided to configure and run the Listener on my pc whilst still connecting to the same database.
Operating system : Window 7 Pro 64 bit
Oracle Apex Listener 2.0.8
Java(TM) SE Runtime Environment (build 1.7.0_25-b17)
Java HotSpot(TM) 64-Bit Server VM (build 23.25-b01, mixed mode)
Went through the configuration as above, once started I tried again to access the listener via SQL Developer. This time I received this output from the listener:
INFO: Error: ORA-02291: integrity constraint (APEX_040200.WWV_FLOW_RT$APPROVALS_SGID_FK) violated - parent key not found, occurred during execution of: [CALL, insert into wwv_flow_rt$approvals (user_name,status,client_id,security_group_id,created_by,created_on,updated_by,updated_on) values(/*in:user_id*/?,/*in:status*/?,/*in:client_id*/?,/*in:tenant_id*/?,upper(/*in:user_id*/?),/*in:created*/?,upper(/*in:user_id*/?),/*in:created*/?), [tenant_id, in, class java.math.BigInteger], [client_id, in, class java.math.BigInteger], [user_id, in, class java.lang.String], [status, in, class oracle.dbtools.rt.oauth.ApprovalRequest$Status], [created, in, class java.sql.Timestamp]]with values: [adminlistener, APPROVED, 3858401374580004, -1, adminlistener, 2014-06-23 12:19:18.785, adminlistener, 2014-06-23 12:19:18.785]
SQL Developer responded with an Authentication Failed titled dialog with the following displayed in the body of the dialog
Cannot connect to DEV.
<!DOCTYPE html>





<html>

<html lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<meta http-equiv="X-UA-Compatible" content="IE=edge,chrome=1">
<style type="text/css" media="screen">html,body,div,span,h3,p,ol,ul,li,header,hgroup{margin:0;padding:0;border:0;font-size:100%;font:inherit;vertical-align:baseline}header,hgroup{display:block}body{font:normal 12px/16px Arial,sans-serif;margin:0 auto;background:#6a9cda}header#xHeader{border-bottom:1px solid #8fa4c0;position:relative;z-index:10;background:none #000}header#xHeader hgroup{width:974px;margin:0 auto;position:relative;height:36px;background:none #000}header#xHeader a#uLogo{margin:8px 0;display:inline-block;font:bold 14px/20px Arial,sans-serif;color:#AAA;text-decoration:none}header#xHeader a#uLogo span.logo{color:#F00}.no-css3 div#xContentContainer div.xContent{padding-top:14px}.no-css3 div#xContentContainer div.xContent div.xMainLeft h2{margin-top:0}div#xWhiteContentContainer{margin-bottom:30px}div#xWhiteContentContainer.xContentWide{background:#FFF;margin-bottom:0}div#xWhiteContentContainer.xContentWide div.xWhiteContent{-moz-border-radius:0;-webkit-border-radius:0;border-radius:0;-moz-box-shadow:none;-webkit-box-shadow:none;box-shadow:none}div#xWhiteContentContainer div.xWhiteContent{width:974px;margin:0 auto;padding:0 0 20px 0;background:#FFF;min-height:500px;-moz-border-radius:0 4px 4px 4px;-webkit-border-radius:0 4px 4px 4px;border-radius:0 4px 4px 4px;-moz-box-shadow:0 1px 2px rgba(0,0,0,0.15);-webkit-box-shadow:0 1px 2px rgba(0,0,0,0.15);box-shadow:0 1px 2px rgba(0,0,0,0.15)}div#xContentHeaderContainer{background:#6a9cda;-moz-box-shadow:0 -1px 0 rgba(0,0,0,0.15) inset;-webkit-box-shadow:0 -1px 0 rgba(0,0,0,0.15) inset;box-shadow:0 -1px 0 rgba(0,0,0,0.15) inset}div#xContentHeaderContainer div.xContentHeader{width:974px;margin:0 auto;padding:30px 0 32px 0;position:relative;min-height:60px}div#xContentHeaderContainer div.xContentHeader h3{font:bold 24px/24px Arial,sans-serif;color:#fff;text-shadow:0 2px 1px rgba(0,0,0,0.25);margin:0 0 20px 0}div#xFooterContainer{min-height:200px;border-top:1px solid rgba(0,0,0,0.15);background:#6a9cda}body.errorPage div#xContentHeaderContainer div.xContentHeader{min-height:30px}body.errorPage div#xContentHeaderContainer div.xContentHeader h3{font:bold 30px/30px Arial,sans-serif;color:#FFF;text-shadow:0 1px 2px rgba(0,0,0,0.25);margin:0}div.errorPage p{font:normal 14px/20px Arial,sans-seri;color:#666;padding:0 0 10px 0}div.errorPage ul{list-style:disc outside;padding:0 10px 0;margin:0 0 20px 0}div.errorPage ul li{font:normal 12px/16px Arial,sans-serif;color:#666;margin:0 0 8px 10px}pre{font-family:Consolas,"Lucida Console","Courier New",Courier,monospace}
</style>
<script type="text/javascript" charset="utf-8">
'header hgroup'.replace(/\w+/g,
function(n) {
document.createElement(n)
</script>
<title>Internal Server Error</title>
</head>
<body class="errorPage">
<header id="xHeader">
<hgroup>
<a id="uLogo" href="./"><span class="logo">ORACLE</span>
REST DATA SERVICES</a>
</hgroup>
</header>
<div id="xContentHeaderContainer">
<div class="xContentHeader">
<h3>
<span class="statusCode">500</span> - <span
class="statusMessage">Internal Server Error</span>
</h3>
</div>
</div>
<div id="xWhiteContentContainer" class="xContentWide">
<div class="xWhiteContent">
<div class="errorPage">
<p>
<ul class="reasons">
</ul>
</p>
<p>
<pre>Request Path passes syntax validation
Mapping request to database pool: PoolMap [_failed=false, _lastUpdate=-1, _pattern=null, _poolName=apex, _regex=null, _type=REGEX, _workspaceIdentifier=null, _serviceName=null]
Applied database connection info
Attempting to process with PL/SQL Gateway
Not processed as PL/SQL Gateway request
Attempting to process as a RESTful Service
Choosing: oracle.dbtools.rt.oauth.TokenHandler as current candidate with score: Score [handle=null, score=0, scope=SecurityConfig [constraint=secure, realm=OAUTH_CLIENT, logonConfig=NONE], originsAllowed=[], corsEnabled=true]
Determining if request can be dispatched as a Tenanted RESTful Service
Request path has one path segment, continuing processing
No Tenant Principal established yet, continuing processing
APEX_LISTENER pool exists, continuing processing
No matching tenant found for: oauth2, cannot dispatch
Chose oracle.dbtools.rt.oauth.TokenHandler as the final candidate with score: Score [handle=null, score=0, scope=SecurityConfig [constraint=secure, realm=OAUTH_CLIENT, logonConfig=NONE], originsAllowed=[], corsEnabled=true] for: POST oauth2/token
oauth2/token authorized as: p6xycV-2QceFnFHkWyJlnA..
</pre>
</p>
<p>
<pre>WebException [statusCode=500]
at oracle.dbtools.rt.web.WebException.webException(WebException.java:343)
at oracle.dbtools.rt.web.WebException.internalError(WebException.java:262)
at oracle.dbtools.rt.oauth.jdbc.JDBCOAuthDataAccess.createApproval(JDBCOAuthDataAccess.java:514)
at oracle.dbtools.rt.oauth.jdbc.JDBCOAuthDataAccess.createApprovedRequest(JDBCOAuthDataAccess.java:181)
at oracle.dbtools.rt.oauth.OAuthAuthorization.resourceOwnerCredentials(OAuthAuthorization.java:654)
at oracle.dbtools.rt.oauth.OAuthAuthorization.tokenRequest(OAuthAuthorization.java:273)
at oracle.dbtools.rt.oauth.TokenHandler.post(TokenHandler.java:44)
at oracle.dbtools.rt.web.RequestHandler.response(RequestHandler.java:268)
at oracle.dbtools.rt.web.RequestHandler.dispatch(RequestHandler.java:361)
at oracle.dbtools.rt.web.RequestHandler.dispatch(RequestHandler.java:85)
at oracle.dbtools.rt.web.RequestDispatchers.dispatch(RequestDispatchers.java:93)
at oracle.dbtools.rt.web.ETags.checkPrecondition(ETags.java:93)
at oracle.dbtools.rt.web.HttpEndpointBase.restfulServices(HttpEndpointBase.java:426)
at oracle.dbtools.rt.web.HttpEndpointBase.service(HttpEndpointBase.java:164)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sun.grizzly.http.servlet.ServletAdapter$FilterChainImpl.doFilter(ServletAdapter.java:1059)
at com.sun.grizzly.http.servlet.ServletAdapter$FilterChainImpl.invokeFilterChain(ServletAdapter.java:999)
at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.java:434)
at oracle.dbtools.standalone.SecureServletAdapter.doService(SecureServletAdapter.java:91)
at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.java:379)
at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)
at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapterChain.java:196)
at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)
at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:849)
at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:746)
at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1045)
at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:228)
at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)
at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)
at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)
at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)
at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)
at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)
at com.sun.grizzly.ContextTask.run(ContextTask.java:71)
at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:532)
at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:513)
at java.lang.Thread.run(Unknown Source)
Caused by: java.sql.SQLIntegrityConstraintViolationException: ORA-02291: integrity constraint (APEX_040200.WWV_FLOW_RT$APPROVALS_SGID_FK) violated - parent key not found
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:447)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:396)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:879)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:505)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:223)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:531)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:208)
at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1046)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1336)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3612)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3713)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1378)
at sun.reflect.GeneratedMethodAccessor28.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at oracle.ucp.jdbc.proxy.StatementProxyFactory.invoke(StatementProxyFactory.java:230)
at oracle.ucp.jdbc.proxy.PreparedStatementProxyFactory.invoke(PreparedStatementProxyFactory.java:124)
at com.sun.proxy.$Proxy44.execute(Unknown Source)
at oracle.dbtools.common.jdbc.JDBCInsert.execute(JDBCInsert.java:58)
at oracle.dbtools.rt.oauth.jdbc.JDBCOAuthDataAccess.createApproval(JDBCOAuthDataAccess.java:487)
... 34 more
</pre>
</p>
</div>
</div>
</div>
<div id="xFooterContainer">
</div>
</body>
</html>
I am assuming this must be part of the problem I am seeing this the Weblogic deployment in my original post.
Does anyone have any suggestions on how best to tackle this?
Regards,
Derek

Unable to connect to Oracle Weblogic Administration Server

Hi Folks,
As part of installation steps, I am facing error with " Unable to connect to Oracle Weblogic Administration Server"
Below is AdminServer Log, So please guide me reolving this impending issue.
####<12 Jun, 2014 2:46:01 PM IST> <Info> <Deployer> <obia111171w64> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000KQFMukk5yW^5xV_AiW1JaMxv000002> <1402564561284> <BEA-149059> <Module adminservicesmbeans of application biadminservices [Version=11.1.1] is transitioning from STATE_ADMIN to STATE_PREPARED on server AdminServer.>
####<12 Jun, 2014 2:46:05 PM IST> <Info> <Deployer> <obia111171w64> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000KQFMukk5yW^5xV_AiW1JaMxv000002> <1402564565300> <BEA-149061> <Module adminservicesmbeans of application biadminservices [Version=11.1.1] failed to transition from STATE_ADMIN to STATE_PREPARED on server AdminServer.>
####<12 Jun, 2014 2:46:11 PM IST> <Error> <Deployer> <obia111171w64> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000KQFMukk5yW^5xV_AiW1JaMxv000002> <1402564571861> <BEA-149231> <Unable to set the activation state to true for the application 'biadminservices [Version=11.1.1]'.
weblogic.management.DeploymentException: Unexpected error encountered
at weblogic.deploy.internal.targetserver.AppContainerInvoker.getOrCreateDeploymentException(AppContainerInvoker.java:299)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:84)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:220)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: java.lang.OutOfMemoryError: PermGen space
at weblogic.j2ee.J2EELogger.logIgnoringUndeploymentError(J2EELogger.java:2902)
at weblogic.application.internal.BaseDeployment$2.logRollbackError(BaseDeployment.java:682)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:65)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:220)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
Thanks,
Wj

Did you manage to solve this issue?
I'm running into the exact same error, but installing 11.1.1.7.0 on Windows 2003
Haven't found anything on MOS yet :(
Kind regards,
Rob
Edited by: rgouw on 10-apr-2013 1:10

Client unable to connect to Oracle 10g on linux

I have installed Oracle 10g on an Intel box running RedHat AS 3.0. The database installation was succesful but I am unable to connect to it from the client on my laptop running Oracle 10g client and Winfdows XP Pro. The server ip is 192.168.1.10 and I can ping it from the client:
C:\>ping attila.n3kje.net
Pinging attila.n3kje.net [192.168.1.10] with 32 bytes of data:
Reply from 192.168.1.10: bytes=32 time<1ms TTL=64
Reply from 192.168.1.10: bytes=32 time<1ms TTL=64
Reply from 192.168.1.10: bytes=32 time<1ms TTL=64
Reply from 192.168.1.10: bytes=32 time<1ms TTL=64
Ping statistics for 192.168.1.10:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
Here is some info about the 2 environments:
[oracle@attila bin]$ uname -a
Linux attila.n3kje.net 2.4.21-9.0.1.ELsmp #1 SMP Mon Feb 9 22:26:51 EST 2004 i686 i686 i386 GNU/Linux
Server hosts file
======================================================
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 attila.n3kje.net attila localhost.localdomain localhost
hostname output
======================================================
[root@attila root]# hostname
attila.n3kje.net
ifconfig output
=======================================================
[root@attila root]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:C0:9F:1D:0C:C8
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:13772171 errors:0 dropped:0 overruns:0 frame:0
TX packets:13748842 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1269613311 (1210.7 Mb) TX bytes:4065314800 (3876.9 Mb)
Interrupt:16 Base address:0xecc0 Memory:fe100000-fe120000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:5513840 errors:0 dropped:0 overruns:0 frame:0
TX packets:5513840 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:865454291 (825.3 Mb) TX bytes:865454291 (825.3 Mb)
Client TNSNAMES.ORA
======================================================
# tnsnames.ora Network Configuration File: C:\Oracle\product\10.1.0\Client_1\NETWORK\ADMIN\tnsnames.ora
# Generated by Oracle configuration tools.
ORACLE10G =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.10)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = DEV10G)
PRDSRR =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.10)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = dev10g)
Client SQLNET.ORA
======================================================
# sqlnet.ora Network Configuration File: C:\Oracle\product\10.1.0\Client_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (EZCONNECT, TNSNAMES)
Server TNSNAMES.ORA
======================================================
# tnsnames.ora Network Configuration File: /u01/app/oracle/product/10.1.0/db_1/n
etwork/admin/tnsnames.ora
# Generated by Oracle configuration tools.
DEV10G =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = attila.n3kje.net)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = DEV10G)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
Server LISTENER.ORA
======================================================
# listener.ora Network Configuration File: /u01/app/oracle/product/10.1.0/db_1/n
etwork/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/10.1.0/db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = attila.n3kje.net)(PORT = 1521))
Results from the TNSPING command issued at the client
=================================================================
C:\>tnsping prdsrr
TNS Ping Utility for 32-bit Windows: Version 10.1.0.2.0 - Production on 02-APR-2
004 09:26:11
Copyright (c) 1997, 2003, Oracle. All rights reserved.
Used parameter files:
C:\Oracle\product\10.1.0\Client_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
(HOST = 192.168.1.10)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = dev10g)))
TNS-12541: TNS:no listener
C:\>tnsping oracle10g
TNS Ping Utility for 32-bit Windows: Version 10.1.0.2.0 - Production on 02-APR-2
004 09:26:38
Copyright (c) 1997, 2003, Oracle. All rights reserved.
Used parameter files:
C:\Oracle\product\10.1.0\Client_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
(HOST = 192.168.1.10)(PORT = 1521))) (CONNECT_DATA = (SERVER = DEDICATED) (SERVI
CE_NAME = DEV10G)))
TNS-12541: TNS:no listener
C:\>
Trying to connect to the database from the server
==================================================
[oracle@attila bin]$ echo $ORACLE_SID
DEV10G
[oracle@attila bin]$ ./sqlplus system
SQL*Plus: Release 10.1.0.2.0 - Production on Fri Apr 2 12:22:29 2004
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Pr
oduction
With the Partitioning, OLAP and Data Mining options
[oracle@attila bin]$ ./sqlplus system@dev10g
SQL*Plus: Release 10.1.0.2.0 - Production on Fri Apr 2 12:23:09 2004
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified
tnsping issued at the server
======================================================
[oracle@attila bin]$ tnsping dev10g
TNS Ping Utility for Linux: Version 10.1.0.2.0 - Production on 02-APR-2004 12:3
:44
Copyright (c) 1997, 2003, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/10.1.0/db_1/network/admin/sqlnet.ora
TNS-03505: Failed to resolve name
What am I doing wrong?
Thanks
Renato

Ok, I was able to succesfully connect to the database from the client. I made the following changes to the sqlnet.ora, tnsnames and listener. Here are the changes I made:
sqlnet.ora
==============================
# SQLNET.ORA Network Configuration File: /u01/app/oracle/product/9.2.0.1.0/netwo
rk/admin/sqlnet.ora
# Generated by Oracle configuration tools.
# NAMES.DIRECTORY_PATH= (EZCONNECT)
NAMES.DIRECTORY_PATH= (EXCONNECT, TNSNAMES, ONAMES, HOSTNAME)
listener.ora
==============================
# listener.ora Network Configuration File: /u01/app/oracle/product/10.1.0/db_1/n
etwork/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/10.1.0/db_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = DEV10G)
(ORACLE_HOME = /u01/app/oracle/product/10.1.0/db_1)
(SID_NAME = DEV10G)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.10)(PORT = 1521))
tnsnames.ora
===========================================
# tnsnames.ora Network Configuration File: /u01/app/oracle/product/10.1.0/db_1/n
etwork/admin/tnsnames.ora
# Generated by Oracle configuration tools.
DEV10G =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.10)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = DEV10G)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
Here is the new problem!
I start the dbconsole using the folowing command:
[oracle@attila bin]$ ./emctl start dbconsole
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.1.0.2.0
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
http://attila.n3kje.net:5500/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ........................
... started.
Logs are generated in directory /u01/app/oracle/product/10.1.0/db_1/attila.n3kje
.net_DEV10G/sysman/log
When I try and access it from the client I get the following error message:
"The database status is currently unavailable. It is possible that the database is in mount or nomount state. Click 'Startup' to obtain the current status and open the database. If the database cannot be opened, click 'Perform Recovery' to perform an appropriate recovery operation."
What am I doing wrong this time?
Your help would be greatly appreciated
Thanks
Renato

Deploy, IIOP connection, Unable to connect to Oracle 8i using IIOP

Similar Messages

Maybe you are looking for