Deploy OpenStack GA release failed due to anti-affinity rule
When I deploy the OpenStack GA release, following error popped up at the last step on the deployment wizard page.
"Deploy OpenStack instance failed. Insufficient number of ESXi hosts to meet the anti-affinity rule"
I have 3 ESXi hosts in management cluster and 1 host in compute cluster, which I used to deploy the beta version without any problem.
Is there any workaround for this without adding more hosts?
I have the same/similar error:
"PlacementException: Cannot find datastore with enough space and meets the datastore anti-affinity rule for [VIO-Controller-0]. Nodes with the same role cannot be placed onto the same datastore."
According to the oms.log [VIO-DB-0], [VIO-DB-1] and [VIO-DB-2] can be properly placed but the problem is always with [VIO-Controller-0]. Whatever I have done (more disc space, more ESXi servers, more datastores) - the problem did not disappear.
Unfortunately I was not able to find any document which explains the requirements for datastore (anti) affinity - there is only 1 page in the documents which describe the storage requirements e.g. db server requires 80 GB (although actually [VIO-DB-0] could only be placed if the disc has 100GB).
But no word on affinity rules or number of required datastores or datastore size.
I am using a test environment with 3 to 5 nested ESXi v6.0 (!!) for the management cluster with a total of around 1.2 TB free disc space for the management cluster.
To me it appears that there exists "somewhere" an undocumented affinity/anti-affinity rule for the placement of the management VMs, especially for [VIO-Controller-x].
I would appreciate if someone could describe the disc/datastore configuration for a successful implementation of OpenStack GA release!
I do attach an older oms.log with above error message (not sure which configuration I tested at that time, probably 3 ESXi with 3 or 4 datastores with 100GB disc space each per ESXi).
Similar Messages
-
Unable to deploy VIO OpenStack due to anti-affinity rule
Hello,
I am trying to deploy OpenStack through vSphere web client. The deployment fails due to an error "Deploy OpenStack instance failed. Insufficient number of ESXi hosts to meet the anit-affinity rule."
I saw a previous post related to the same issue where it is mentioned that you need atleast 800GB of datastore space on the hosts combined in a cluster.
I have 2 Hosts in Management cluster adding up to 1000GB and 2 Hosts in Computer Cluster about 800GB datastore space combined. I have one host in Edge Cluster with datastore space of 250GB.
How much datastore space should each cluster comprise off to deploy OpenStack instances without failing? Are there any other credentials like CPU/Memory/Disk space that must be considered for the deployment?
I would really appreciate any help.
Thanks,
RadhikaHi,
I have followed the OpenStack Quick Start Guide and deployed hosts and enabled DRS, host monitoring etc along with enabling vMotion and FT. I did deploy another ESXi host under Management cluster. Now, management cluster comprises of 3 Hosts with total 1080GB datastore space, Compute cluster with 2 hosts and about ~800GB datastore space and Edge cluster with 1 Host - 250GB datastore space.
Now, while deploying the OpenStack, it fails due to "Cannot find datastore with enough space and meets datastore anti-affinity rule for [VIO-Controller 0]"
Attached is the error message. Datastore has enough space, but I don't understand why I am getting this. How do I fix this?
Thanks,
Radhika -
Adf mobile - Deployment failed due to one or more errors returned by 'osascript'
I had the mac jdeveoper deploying a mobile app in ios emulator file running fine.
I had to update the xcode to xcode5 to get the certificate - now the deployment to emulator won't work.
These are the error messages
[02:34:41 PM] Command-line execution succeeded.
[02:34:41 PM] Command-line executed: [osascript, -e, tell application "iPhone Simulator" to activate]
[02:34:41 PM] Command-line execution failed (Return code: 1)
[02:34:41 PM] Deployment cancelled.
[02:34:41 PM] ---- Deployment incomplete ----.
[02:34:41 PM] Failed deploying to the iOS simulator.
[02:34:41 PM] Deployment failed due to one or more errors returned by 'osascript'. The following is a summary of the returned error(s):
Command-line execution failed (Return code: 1)I deleted xcode 5 and installed xcode 4.6.3. Simulator works ok for 6.1 simulator target version.
In jdeveloper ios option only 6.1 shows up for simulator target version?
How do I get the 7 to show up there please?
If simulator will not show up - can I still deploy / test it in iphone with ios7? -
Deployment failed due to addition of few components
Hi Masters,
Actually I have deployed my application, it has been deployed properly. Then i have added one more form in the iview. Then when I try to deploy then it is failed. Is there any memory limit to iview. I hope it is the problem I got to know. After deleting that form again it has been deployed properly. Even once the application which has been once deployed properly, after changing one input field to combobox, then it starts shouting again.
Is there any way to increase the memory capacity of iview.
Thanks & Regards,
kaushik SreeramYes, there is a 32K limit in the Flex Compiler. More details are in the Visual Composer FAQ in the WIKI: https://www.sdn.sap.com/irj/sdn/wiki
-
Activation failed due to sructure generation error.-URGENT
i tried to check in an activity but activation failed due to the foloowing error:PLEASE HELP VERY URGENT
Development Component Build (2008-03-14 10:09:20)
Component name: tablist
Component vendor: worldbank.org
SC compartment: worldbank.org_GDB_OPERATIONS_1
Configuration: WAS_MIGATEST_D
Location: WAS_MIGATEST_D
Source code location: http://sapjdi01:50000/dtr/ws/MIGATEST/worldbank.org_GDB_OPERATIONS/dev/active/DCs/worldbank.org/tablist/_comp/
DC root folder: /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/worldbank.org/tablist/_comp/
DC type: Web Dynpro
Host: sapjdi01
DC Model check:
[dcmake] All used DCs are available locally
[dcmake] validating dependency to build plugin "sap.com/tc/bi/bp/webDynpro"
[dcmake] validating dependency to public part "default" of DC "sap.com/tc/cmi"
[dcmake] validating dependency to public part "default" of DC "sap.com/tc/ddic/ddicruntime"
[dcmake] validating dependency to public part "default" of DC "sap.com/tc/ddic/metamodel/content"
[dcmake] validating dependency to public part "default" of DC "sap.com/tc/wd/webdynpro"
[dcmake] validating dependency to public part "default" of DC "sap.com/tc/logging"
[dcmake] validating dependency to public part "default" of DC "sap.com/tc/wdp/metamodel/content"
[dcmake] validating dependency to public part "default" of DC "sap.com/com.sap.aii.proxy.framework"
[dcmake] validating dependency to public part "default" of DC "sap.com/com.sap.aii.util.misc"
[dcmake] validating dependency to public part "default" of DC "sap.com/com.sap.exception"
[dcmake] validating dependency to public part "default" of DC "sap.com/com.sap.mw.jco"
[dcmake] validating dependency to public part "pp_connserv" of DC "worldbank.org/connserv"
[dcmake] DC model check OK
Start build plugin:
[dcmake] using build plugin: sap.com/tc/bi/bp/webDynpro
[dcmake] starting build plugin from : /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/bi/bp/webDynpro/_comp/gen/default/public/webDynpro/
Build Plugin 'WebDynproPlugin', Version 6.40 SP 19 (630_VAL_REL, built on 2006-10-27 02:01:51 CEST)
development component: tablist (worldbank.org)
software component: GDB_OPERATIONS (worldbank.org)
location: WAS_MIGATEST_D
type: Web Dynpro
build variant: default
source location: http://sapjdi01:50000/dtr/ws/MIGATEST/worldbank.org_GDB_OPERATIONS/dev/active/
plugin start time: 2008-03-14 10:09:21 GMT+00:00
Java VM: Classic VM, 1.4.2 (IBM Corporation)
General options:
convert *.xlf to *.properties: yes
include sources for debugging: yes
Source folder META-INF exists but is empty.
Source folder src/configuration exists but is empty.
Plugin initialized in 1.026 seconds
Warning: Runtime dependency to connserv (worldbank.org) not allowed (incompatible runtime type).
Preparing data context..
No 'default' JDK defined, will use running VM.
Data context prepared in 0.128 seconds
Executing macro file..
Using macro file: /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/bi/bp/webDynpro/_comp/gen/default/public/webDynpro/macros/build.vm
Creating output file: /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/worldbank.org/tablist/_comp/gen/default/logs/build.xml
Macro file executed in 3 seconds
Starting Ant..
Using build file: /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/worldbank.org/tablist/_comp/gen/default/logs/build.xml
Using build target: build
Generation folder: /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/t/013EC0ABDECC3015F13C417F5CBF217B
Using Ant version: 1.5.4
prepare:
[mkdir] Created dir: /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/worldbank.org/tablist/_comp/gen/default/deploy
compile:
[ddgen]
[ddgen] [Info] Property deployment is true: Deployment information is provided!
[ddgen] [Info] Property sourcepath: /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/worldbank.org/tablist/_comp/src/packages
[ddgen] [Info] Property targetpath: /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/t/013EC0ABDECC3015F13C417F5CBF217B/gdd
[ddgen] [Info] Property archivename: worldbank.org~tablist
[ddgen] [Info] Property vendor: worldbank.org
[ddgen] [Info] Property dcname: tablist
[ddgen] [Info] Property language: Available languages are automatically determined!
[ddgen] [Info] Property addpaths ...
[ddgen] [Info] SapMetamodelWebdynproContent.zip - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/bi/extmm/_comp/gen/default/public/def/lib/model
[ddgen] [Info] SapMetamodelDictionaryContent.zip - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/bi/extmm/_comp/gen/default/public/def/lib/model
[ddgen] [Info] worldbank.orgconnservpp_connserv.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/worldbank.org/connserv/_comp/gen/default/public/pp_connserv/lib/java
[ddgen] [Info] exception.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/com.sap.exception/_comp/gen/default/public/default/lib/java
[ddgen] [Info] SapDictionaryTypeServices.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/ddic/ddicruntime/_comp/gen/default/public/default/lib/java
[ddgen] [Info] SapDictionaryTypesRuntime.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/ddic/ddicruntime/_comp/gen/default/public/default/lib/java
[ddgen] [Info] jrfc.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/com.sap.mw.jco/_comp/gen/default/public/default/lib/java
[ddgen] [Info] SapMetamodelWebdynproContent.zip - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/wdp/metamodel/content/_comp/gen/default/public/default/lib/java
[ddgen] [Info] aii_proxy_rt.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/com.sap.aii.proxy.framework/_comp/gen/default/public/default/lib/java
[ddgen] [Info] cmiapi.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/cmi/_comp/gen/default/public/default/lib/java
[ddgen] [Info] webdynproadmin.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
[ddgen] [Info] webdynprobasesrvc.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
[ddgen] [Info] webdynproclientserver.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
[ddgen] [Info] webdynpromodelimpl.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
[ddgen] [Info] webdynpromodel_dynamicrfc.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
[ddgen] [Info] webdynpropdfobject.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
[ddgen] [Info] webdynproprogmodel.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
[ddgen] [Info] webdynproruntime_designtime_coupling.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
[ddgen] [Info] webdynproruntime_designtime_coupling_api.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
[ddgen] [Info] webdynproruntime_repository.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
[ddgen] [Info] webdynproruntime_repository_pmr.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
[ddgen] [Info] webdynproservices.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
[ddgen] [Info] SapMetamodelDictionaryContent.zip - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/ddic/metamodel/content/_comp/gen/default/public/default/lib/java
[ddgen] [Info] aii_util_misc.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/com.sap.aii.util.misc/_comp/gen/default/public/default/lib/java
[ddgen] [Info] logging.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/logging/_comp/gen/default/public/default/lib/java
[ddgen] [Info] logging.perf.jar - /usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/logging/_comp/gen/default/public/default/lib/java
[ddgen] [Info] Initialize generation templates from configuration jar:file:/usr/sap/WAS/DVEBMGS00/j2ee/cluster/server0/temp/CBS/199/.B/48895/DCs/sap.com/tc/bi/extddic/_comp/gen/default/public/def/lib/java/SapDictionaryGenerationCore.jar!/DictionaryGenerationConfigurationCompiled.xml
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Origin.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/PackagePointer.java
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Inves_Id.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Ccy_Code.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Subm_Type.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Uw_Upi.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Guar_Holder.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Conver_Type.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Doc_Num.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Sic_Cde.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Rcvr_Type.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Notif_Sndr.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Notif_Rcvr.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Modified_By.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/Symsgid.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Status_Type.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/Bapi_Msg.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Inves_Ty.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Reason_Dt.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Stl_Upi.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/Balmnr.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Notif_Id.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/Bapi_Line.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Frcast_Chk.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Migeo_Upi.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Waiv_Flag.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Item_Num.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/Symsgno.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Status_Categ.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Mngmt_Gr.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Reg_Num.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Stat_Chng_Dt.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Migaorg_Code.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Rcvr_Grp.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Commnt_Eventtype.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/Bapi_Param.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Doc_Typ.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Stl_Comment.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Src_Upi.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Notif_Eventtype.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/Bapi_Mtype.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Sndr_Type.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/Bapi_Fld.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Commnt_Doctype.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Cmmt_User.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/Symsgv.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Sme_Share.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Description.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/Balognr.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/Bapilogsys.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Amount.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Status.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Reason_Type.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Comment_Id.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Time_Stamp.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Reason.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__Miga_Source.gsimpletype
[ddgen] [Info] Generating datatypes/org/wb/operations/stl/types/__Miga__S_Doc_Typ.gstructure
[ddgen] [Error] Structure org.wb.operations.stl.types.__Miga__Appl is not generated
[ddgen] [Error] BuiltIn Type or Simple Type expected
[ddgen] [Info] Catching throwable null
[ddgen] [Info] com.sap.dictionary.generation.ant.GenerationAntTaskError
[ddgen] at com.sap.dictionary.generation.ant.GenerationAnt.showCheckResult(GenerationAnt.java:171)
[ddgen] at com.sap.dictionary.tools.generation.Generation.generatePersistentStructure(Generation.java:480)
[ddgen] at com.sap.dictionary.tools.generation.console.GenerationConsole.generate(GenerationConsole.java:168)
[ddgen] at com.sap.dictionary.generation.ant.GenerationAnt.main(GenerationAnt.java:47)
[ddgen] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[ddgen] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
[ddgen] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
[ddgen] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
[ddgen] at java.lang.reflect.Method.invoke(Method.java:391)
[ddgen] at com.sap.dictionary.generation.ant.DDGenAntTask.execute(DDGenAntTask.java:219)
[ddgen] at org.apache.tools.ant.Task.perform(Task.java:341)
[ddgen] at org.apache.tools.ant.Target.execute(Target.java:309)
[ddgen] at org.apache.tools.ant.Target.performTasks(Target.java:336)
[ddgen] at org.apache.tools.ant.Project.executeTarget(Project.java:1339)
[ddgen] at com.sap.tc.buildplugin.techdev.ant.util.AntRunner.run(AntRunner.java:115)
[ddgen] at com.sap.tc.buildplugin.AbstractAntBuildAction.execute(AbstractAntBuildAction.java:65)
[ddgen] at com.sap.tc.buildplugin.AbstractPlugin.handleBuildStepSequence(AbstractPlugin.java:226)
[ddgen] at com.sap.tc.buildplugin.AbstractPlugin.performBuild(AbstractPlugin.java:202)
[ddgen] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[ddgen] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
[ddgen] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
[ddgen] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
[ddgen] at java.lang.reflect.Method.invoke(Method.java:391)
[ddgen] at com.sap.tc.buildtool.PluginCommunicator.maybeInvoke(PluginCommunicator.java:114)
[ddgen] at com.sap.tc.buildtool.PluginCommunicatorV2.communicate(PluginCommunicatorV2.java:42)
[ddgen] at com.sap.tc.buildtool.PluginHandlerImpl.handlePluginCommunication(PluginHandlerImpl.java:354)
[ddgen] at com.sap.tc.buildtool.PluginHandlerImpl.execute(PluginHandlerImpl.java:176)
[ddgen] at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1726)
[ddgen] at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1498)
[ddgen] at com.sap.tc.buildcontroller.CBSBuildController.build(CBSBuildController.java:727)
[ddgen] at com.sap.tc.buildcontroller.CBSBuildController.execCommand(CBSBuildController.java:503)
[ddgen] at com.sap.tc.buildcontroller.CBSBuildController.evalCmdLine(CBSBuildController.java:442)
[ddgen] at com.sap.tc.buildcontroller.CBSBuildController.run(CBSBuildController.java:314)
[ddgen] at com.sap.tc.buildcontroller.CBSBuildController.exec(CBSBuildController.java:252)
[ddgen] at com.sap.tc.buildcontroller.CBSBuildController.mainLoop(CBSBuildController.java:207)
[ddgen] at com.sap.tc.buildcontroller.CBSBuildController.main(CBSBuildController.java:168)
[ddgen] ERROR: Unknown exception during generation null (com.sap.dictionary.generation.ant.GenerationAntTaskError)
[ddgen] ERROR: Generation failed due to errors (3 seconds)
Ant runtime 5.593 seconds
Ant build finished with ERRORS
[Error] Generation failed!
Error: Build stopped due to an error: [Error] Generation failed!
Build plugin finished at 2008-03-14 10:09:32 GMT+00:00
Total build plugin runtime: 10.143 seconds
Build finished with ERRORI think the "," that comes in the flat file. CHange the number fields in the file from ",". If it has 1000 separator remove them. You need not have them in the file. In your case i think the decimals are coming as ",". In that case change your user settings for decimal places and then try to load.
Hope this helps -
We currently have an Exchange 2010 hybrid install and we have migrated all of our email accounts to Office 365. Now, I want to do an on-premise install of Exchange 2013 to better manage the hybrid setup. When I try to install Exchange 2013 it
asks for my O365 credentials to do a hybrid check but always fails with the above message. I've done quite a bit of searching but haven't come up with anything useful.
Here is what appears in the exchange setup log:
[09/22/2014 15:48:27.0024] [0] Reading the Exchange Online tenant version information failed due to an exception. Please check the Exchange setup log for more information.
[09/22/2014 15:48:27.0024] [0] Could not load type 'Microsoft.Exchange.Data.Directory.DirectoryBackendType' from assembly 'Microsoft.Exchange.Data.Directory, Version=15.0.0.0, Culture=neutral,
[09/22/2014 15:48:27.0024] [0] Could not load type 'Microsoft.Exchange.Data.Directory.DirectoryBackendType' from assembly 'Microsoft.Exchange.Data.Directory, Version=15.0.0.0, Culture=neutral,
[09/22/2014 15:48:27.0147] [0] Session=Tenant Total Cmdlet Time=1.6931035s
[09/22/2014 15:48:27.0148] [0] Microsoft.Exchange.Management.Deployment.HybridConfigurationDetection.HybridConfigurationDetectionException: Reading the Exchange Online tenant version information failed due to an exception. Please check the Exchange setup log
for more information. ---> System.TypeLoadException: Could not load type 'Microsoft.Exchange.Data.Directory.DirectoryBackendType' from assembly 'Microsoft.Exchange.Data.Directory, Version=15.0.0.0, Culture=neutral,Hi,
I recommend you post this in
office 365 forum also, as they should have more professional knowledge on hybrid deployments
and you may get effective solution timely.
In addition, I found a similar thread for you reference:
http://community.office365.com/en-us/f/156/t/255739.aspx
According to the reply of this thread, if you run the HCW (Hybrid Configuration Wizard) to deploy the Exchange Hybrid environment, there will generate an HCW log
file for this deployment.
Additional troubleshooting information is available in the Update-HybridConfiguration log file located at C:\Program Files\Microsoft\Exchange Server\V1*\Logging\Update-HybridConfiguration\HybridConfiguration****.log
Best regards,
Niko Cheng
TechNet Community Support -
Transport Request got failed due to Source system does not Exist
Dear All,
I Have collected All data soruces which are related to R3 data sources and Flat File data sources...
After import the transport request it got failed due to Flata file source system does not exist in BI quality system.
But all data sources related to R3 and R3 Source system has been moved which are available in BI Quality sytem also.
why Flat File source and data source are moving.. why i am not sure it was throuing error message called Source System does not exist..
Thanks,
VenDear Venkat ,
Go to Quality system .
Use RSA1 Transaction --> go to Tools --> Manage Source System :
Here you can map the entry of system ..
Second : go to Development system under RSA1> Transport Connection and click on Source system button first --> select your source system ---you can select multiple entry also ..collect your data source ( with before and after option ) and deselect which object you do not need ..And select collection mode to automatically ...
use the transport button to create transport request and release from development system .
I hope you will not get error in Q system .
If still facing error , Please let me know.
Regards
Vikas Sharma
Robert Bosch
Edited by: Vikas Sharma-Bosch on May 5, 2011 5:34 PM -
Hi,
I am extensively using Fixed point math library functions which i have downloaded from NI website in my FPGA application.I am getting following errors while compiling the code.
I would like to know is there any limitations in using fixed point functions?
I am configuring all funtions as a 64 bit word length and 32 bit integer length in cofig parameter set up and all are outside the timed loop.
Apart from below error it is occupieng LUT's 300% in one simple VI (mathematical calculations using fixed point functions).
So i would like to know is there any way to optimize the code?.
Status: Compilation failed due to timing violations.
The compile process reported a timing violation.
Suggestions for eliminating the problem:
* For Timed Loops with timing violations
- Reduce long arithmetic/combinatorial paths
- Use pipelining within Timed Loops
- Reduce the number of nested case structures
* Reduce clock rates if possible
* Recompile
Refer to the LabVIEW Help for more information about resolving compilation errors. Click the Help button to display the LabVIEW Help.
Compilation Summary
Device Utilization Summary:
Number of BUFGMUXs 2 out of 16 12%
Number of External IOBs 214 out of 484 44%
Number of LOCed IOBs 214 out of 214 100%
Number of MULT18X18s 69 out of 96 71%
Number of SLICEs 4387 out of 14336 30%
Clock Rates: (Requested rates are adjusted for jitter and accuracy)
Base clock: 40 MHz Onboard Clock
Requested Rate: 40.408938MHz
Achieved Rate: 36.974044MHz <<<=== Timing Violationlion-o wrote:
The Fixed Point Library is certainly not a demo, and we encourage you to use it extensively.
Really? "Demo" is perhaps too strong a word, but the NI Labs page says that the toolkits there "aren't quite ready for release" and are "experimental prototype"s. My understanding was that they work, but are only meant to show potential future products and get feedback on them. If this is not the case, perhaps the wording needs to be changed.
I know I wouldn't want to be using something throughout my code and then find out that it is not supported when the next LV version came out because it was only a prototype. Can you promise support into the future for these? If you can't, that should be clearly stated.
Try to take over the world! -
Tear down of include component context failed due to an unhandled exception
My Application was developed with JDeveloper 11.1.1.3.0 . one of the page has a panel collection with simple table that fetch the data from a view object.
filter and sorting are enabled for all columns.
this page runs correctly on the integrated WLS server and on the standalone WLS of the same Fusion Middleware package on my pc.
I've then deployed the ear file on two different WLS server with the same version. the panel collection with the table did not displayed, and found the error below in log files.
Also after that error, the application does not accept any request, and I have to close the browser and start a new session.
Error Details from the log :
Module : oracle.adf.view.rich.component.fragment.UIXInclude
Message: Tear down of include component context failed due to an unhandled exception.
java.util.NoSuchElementException
at java.util.ArrayDeque.removeFirst(ArrayDeque.java:251)
at java.util.ArrayDeque.pop(ArrayDeque.java:480)
at oracle.adfinternal.view.faces.context.ApplicationContextManagerImpl.popContextChange(ApplicationContextManagerImpl.java:66)
at oracle.adf.view.rich.component.fragment.UIXInclude.tearDownVisitingContext(UIXInclude.java:206)
at oracle.adf.view.rich.component.fragment.UIXPageTemplate.tearDownVisitingContext(UIXPageTemplate.java:248)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.encodeEnd(ContextSwitchingComponent.java:157)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:415)
at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2567)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:432)
at oracle.adfinternal.view.faces.renderkit.rich.FormRenderer.encodeAll(FormRenderer.java:220)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1369)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:765)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:415)
at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2567)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:432)
at oracle.adfinternal.view.faces.renderkit.rich.DocumentRenderer.encodeAll(DocumentRenderer.java:1071)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1369)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:765)
at org.apache.myfaces.trinidad.component.UIXComponentBase.__encodeRecursive(UIXComponentBase.java:1515)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeAll(UIXComponentBase.java:785)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:942)
at com.sun.faces.application.ViewHandlerImpl.doRenderView(ViewHandlerImpl.java:271)
at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:202)
at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:710)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:273)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:205)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:414)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)Thank you Shah,
No, I did not do that , and I don't understand.
however, all other pages in the applications works fine, and forms and tables are displayed and working fine.
could you please explain more ? -
Import of a request failing : ERROR: connect failed due to DbSL load lib fa
Hi,
I am using ecc6, on hp-unix and oracle as database.
When i try to import a request from stms, i get this error.
DURING IMPORT ERROR:
Transport control program tp ended with error code 0249
Errors: connect failed due to DbSL load lib failure
TP ERROR:
Transport control program tp ended with error code 0249
Message no. XT200
Diagnosis
An error occurred when executing a tp command.
Command: IMPORT E07K901512 DEV client100 U01 pf=/usr/sap/tr
Return code: 0249
Error text: connect failed due to DbSL load lib failure
Request: E08K901525
System Response
The function terminates.
Procedure
Correct the error and execute the command again if necessary.
THEN I TRIED TO IMPORT USING TP COMMAND:
WITH OUT DIR_LIBRARY
% ./tp connect DEV
This is ./tp version 370.00.09 (release 700, unicode enabled)
E-TPSETTINGS could not be opened.
EXIT
ERROR: System : Parameter SAPEVTPATH not set. Batch jobs cannot be started.
Error in TPSETTINGS: transdir not set.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown,...)
% ./R3trans -d
This is ./R3trans version 6.14 (release 700 - 18.09.06 - 09:35:00).
unicode enabled version
2EETW169 no connect possible: "environment variable DIR_LIBRARY is not set."
./R3trans finished (0012).
% # export DIR_LIBRARY=/usr/sap/DEV/SYS/exe/run
% ./R3trans -d
This is ./R3trans version 6.14 (release 700 - 18.09.06 - 09:35:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ORACLE --- ORACLE_SID =
'DEV'"
./R3trans finished (0012).
% ./tp connect DEV
This is ./tp version 370.00.09 (release 700, unicode enabled)
E-TPSETTINGS could not be opened.
EXIT
ERROR: System : Parameter SAPEVTPATH not set. Batch jobs cannot be started.
Error in TPSETTINGS: transdir not set.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown,...)
COULD SOMEONE GIVE ME A SOLUTION TO OVERCOME THIS.
YOUR SOLUTION AND GREATELY APPRITIATED.
REGARDS,
DHANANJAYHi Dhanajay,
Firstly check if R3trans -d is working fine.
If so, please chek if the following parameters are set properly.
DIR_LIBRARY=/usr/sap/<SID>/SYS/exe/run
TRANSDIR = ....\trans
<SID>/DBHOST = <HOSTNAME>
<SID>/DBNAME = <SID>
<SID>/DBTYPE = ora
Execute the below command and check the transport profile:
tp check all pf=/usr/sap/trans/bin/TP_DOMAIN_<SID>.PFL
Please confirm the permission of the /oracle/ directory
The permission of the /oracle should be 755.
Also check if the import queue is not locked.
Also please ensure the Kernel is of latest version, if not, please update the DBSL shared library.Please look at the note 19466.
Finally you can try once distributing and activating the transport routes once.
When you executed command R3trans -d logfile trans.log will be created.
Please check this file for exact error information.
Paste the log file here.
Let us know the outcome.
Regards,
Sujit. -
Error -: AIP-16001: The model validation engine failed due to an internal s
Hi Gurus,
While reactivitaing the config, I am getting the below error.
Error -: AIP-16001: The model validation engine failed due to an internal system error.
Could you please help me how to resolve this.These are the log files,
<HEADER>
<TSTZ_ORIGINATING>2009-08-04T05:38:22.454+00:00</TSTZ_ORIGINATING>
<ORG_ID>oracle.com</ORG_ID>
<COMPONENT_ID>IP</COMPONENT_ID>
<MSG_ID>AIP-18529</MSG_ID>
<HOSTING_CLIENT_ID>beta</HOSTING_CLIENT_ID>
<MSG_TYPE TYPE="ERROR"></MSG_TYPE>
<MSG_GROUP>IP</MSG_GROUP>
<MSG_LEVEL>16</MSG_LEVEL>
<HOST_ID>essapt020-u009.emrsn.com</HOST_ID>
<HOST_NWADDR>10.236.93.62</HOST_NWADDR>
<MODULE_ID>IP</MODULE_ID>
<THREAD_ID>AJPRequestHandler-ApplicationServerThread-8</THREAD_ID>
<USER_ID>aelshat4</USER_ID>
</HEADER>
<PAYLOAD>
<MSG_TEXT>Error -: AIP-18529: Failed to reactivate the configuration.
at oracle.tip.configuration.ConfigurationManager.reactivateConfiguration(ConfigurationManager.java:907)
at oracle.tip.tools.integration.buslogic.deployment.DeploymentEventHandler.handleReactivateConfiguration(DeploymentEventHandler.java:745)
at oracle.tip.tools.integration.buslogic.deployment.DeploymentEventHandler.performExtendedActions(DeploymentEventHandler.java:249)
at oracle.tip.tools.integration.event.IPBaseUnboundEventHandler.performActions(IPBaseUnboundEventHandler.java:88)
at oracle.tip.tools.integration.event.IPEventHandler.handleEventIP(IPEventHandler.java:138)
at oracle.tip.tools.integration.event.IPEventHandler.handleEvent(IPEventHandler.java:104)
at oracle.cabo.servlet.event.TableEventHandler.handleEvent(Unknown Source)
at oracle.cabo.servlet.event.TableEventHandler.handleEvent(Unknown Source)
at oracle.cabo.servlet.event.BasePageFlowEngine.handleRequest(Unknown Source)
at oracle.cabo.servlet.AbstractPageBroker.handleRequest(Unknown Source)
at oracle.cabo.servlet.ui.BaseUIPageBroker.handleRequest(Unknown Source)
at oracle.cabo.servlet.PageBrokerHandler.handleRequest(Unknown Source)
at oracle.cabo.servlet.UIXServlet.doGet(Unknown Source)
at oracle.cabo.servlet.UIXServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:835)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:341)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:816)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:231)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:136)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2009-08-04T05:38:22.455+00:00</TSTZ_ORIGINATING>
<ORG_ID>oracle.com</ORG_ID>
<COMPONENT_ID>UI</COMPONENT_ID>
<HOSTING_CLIENT_ID>beta</HOSTING_CLIENT_ID>
<MSG_TYPE TYPE="ERROR"></MSG_TYPE>
<MSG_GROUP>UI</MSG_GROUP>
<MSG_LEVEL>16</MSG_LEVEL>
<HOST_ID>essapt020-u009.emrsn.com</HOST_ID>
<HOST_NWADDR>10.236.93.62</HOST_NWADDR>
<MODULE_ID>UI</MODULE_ID>
<THREAD_ID>AJPRequestHandler-ApplicationServerThread-8</THREAD_ID>
<USER_ID>aelshat4</USER_ID>
</HEADER>
<PAYLOAD>
<MSG_TEXT>handleReactivatingConfiguration() - Error -: AIP-18529: Failed to reactivate the configuration.</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2009-08-04T05:38:22.456+00:00</TSTZ_ORIGINATING>
<ORG_ID>oracle.com</ORG_ID>
<COMPONENT_ID>UI</COMPONENT_ID>
<HOSTING_CLIENT_ID>beta</HOSTING_CLIENT_ID>
<MSG_TYPE TYPE="ERROR"></MSG_TYPE>
<MSG_GROUP>UI</MSG_GROUP>
<MSG_LEVEL>16</MSG_LEVEL>
<HOST_ID>essapt020-u009.emrsn.com</HOST_ID>
<HOST_NWADDR>10.236.93.62</HOST_NWADDR>
<MODULE_ID>UI</MODULE_ID>
<THREAD_ID>AJPRequestHandler-ApplicationServerThread-8</THREAD_ID>
<USER_ID>aelshat4</USER_ID>
</HEADER> -
Getting Error in Data Collection - FDPSTP failed due to ORA-23401
Hi All,
I am really new to ATP Setup and after referring to the Metalink notes, I have compelted the setups required to calculate ATP in Sales Order Window.
But when I am submitting the Data Collection which is the last step I guess, the program is ending with Error.
I am getting the error.
FDPSTP failed due to ORA-23401: materialized view "APPS"."MTL_OH_QTYS_SN" does not exist.
And because of this, when I am going to Sales Order to check the ATP, I am getting the error that Try Calculating ATP Again.
Please Help. Project is into a critical stage and I am stuck with this error.
With Regards,
Vishal MajithiaPlease mention the application release.
I am really new to ATP Setup and after referring to the Metalink notes, I have compelted the setups required to calculate ATP in Sales Order Window.What is the document you are referring to?
I am getting the error.
FDPSTP failed due to ORA-23401: materialized view "APPS"."MTL_OH_QTYS_SN" does not exist.Please see if these docs help.
Refresh Snapshot Errors With ORA-12034: Snapshot Log On "BOM"."BOM_SUB_OPERATION_RESOURCES" Younger Than Last Refresh [ID 180705.1]
How to Rebuild Source Snapshots Used in the Data Collection or Planning Data Pull MSCPDP [ID 148584.1]
Thanks,
Hussein -
Hub startup failed due to licensing failure
Hi all.
I have just installed weblogic 6.0 sp1 on solaris 2.8. the web server starts
up and everything is hunky dory.
furthermore i downloaded collaborate 1.0.1 and installed it. the
installation went fine.
here is my problem. when i execute the startWeblogic.sh script in the hub,
Weblogic reports the following error:
<24-Apr-01 13:49:03 GMT+01:00> <Error> <WLC> <<Hub> ERROR: Hub startup
failed due to licensing failure.>
I get this problem using jdk122 and jdk130.
I cannot seem to find the problem.
Any feedback would be appreciated.
PS. My license.bea file looks as follows:
<?xml version="1.0"?>
<bea-licenses>
<license-group format="1.0" product="WebLogic Collaborate"
release="1.0">
<license
component="Core Server"
expiration="2001-05-24"
ip="any"
licensee="BEA Evaluation Customer"
type="EVAL"
signature="2tDDH3g1qXubdlfsahWRNrR6+tc=0MC0CFCoH/XUHiZuu+yhzpuzv6UFl
kJ44AhUA2/U26g1keq5nNoO00NC2u9ezWeA="
/>
</license-group>
<license-group format="1.0" product="wlpi" release="1.2">
<license
component="WebLogic Process Integrator"
expiration="2001-05-24"
ip="any"
licensee="BEA Evaluation Customer"
type="EVAL"
users="5"
signature="2tDDH3g1qXubdlfsahWRNrR6+tc=0MCwCFEh5H427STpTMX1y25DSmc65
b/MVAhQMNJo1ujoB6DudzF59hL/Tx2vbGQ=="
/>
</license-group>
<license
component="WebLogic"
expiration="2001-05-23"
ip="any"
licensee="BEA Evaluation Customer"
type="EVAL"
units="5"
signature="OFcm7oSc4jOT5vonluVZpsAHX2g=0MCwCFEmkcBweXEoxtJxzCIarx8i+
XBguAhQvCxM9E/T4HGfbIUfb4+OiNUYsPw=="
/>
<license
component="SSL/Export"
expiration="2001-05-23"
ip="any"
licensee="BEA Evaluation Customer"
type="EVAL"
units="5"
signature="OgS8PvglCrGr5xglLHeut8tE5vc=0MC0CFQDcxuNftALK3tZYuJw6hI15
GaqrBgIUcTi0vNzwoG1alTX1WXnvcX9EOiM="
/>
<license
component="2PC"
expiration="2001-05-23"
ip="any"
licensee="BEA Evaluation Customer"
type="EVAL"
units="5"
signature="CcdspC/3P0iELwWsETBWI/hEalw=0MC0CFQCtTlW7enw3kFZ7IU09jaa/
BVle5wIUSSfMk23C19hznredmfr+soEYiX0="
/>
<license
component="In-memory Replication - Servlet"
expiration="2001-05-23"
ip="any"
licensee="BEA Evaluation Customer"
type="EVAL"
units="5"
signature="c+mtrQ1ZuRiKeiELua/hSxvHqew=0MC4CFQC4qvLRsblTBvC5+IEVrDI1
Tek1YwIVAJ1NYWZE6xPHYyyVdlaXRJbhayCj"
/>
<license
component="In-memory Replication - EJB"
expiration="2001-05-23"
ip="any"
licensee="BEA Evaluation Customer"
type="EVAL"
units="5"
signature="ZenJ1bPXGf2N/Bq8XugDnDIP8sQ=0MC0CFQC+ayYQFxhpIMug7ZHtZIfS
vg4tlwIUHIYgx30GoxIdmR19cGddWM/mp3E="
/>
<license
component="EJB 1.1"
expiration="2001-05-23"
ip="any"
licensee="BEA Evaluation Customer"
type="EVAL"
units="5"
signature="XwwhoY5ysJ8h1pjzx23ujxZI9nY=0MC4CFQC2ATLeRv6cStQE1B/gyMUT
R6SRvQIVAMsQmtFC0/J4sF26n+B1zEyDOmv/"
/>
<license
component="EJB 2.0"
expiration="2001-05-23"
ip="any"
licensee="BEA Evaluation Customer"
units="5"
signature="ksI9jkE6gL9u8GdVEpZNQtOvjm8=0MCwCFBUir1rQV/FLNdc+4lfdIV1x
+xk5AhQpQwwWMfUd6TbL3UvB0u9DbZponQ=="
/>
<license
component="JMS"
expiration="2001-05-23"
ip="any"
licensee="BEA Evaluation Customer"
type="EVAL"
units="5"
signature="Z4Q4VngOAJSqSsr1UXC37DTOyVg=0MC0CFQCZtOwzb02hOSR3z9Hp6k86
nl1uFQIUfhy+ODL+Y7B9DkGDS7yT4zQPPpE="
/>
<license
component="Cluster"
expiration="2001-05-23"
ip="any"
licensee="BEA Evaluation Customer"
type="EVAL"
units="5"
signature="Tkg9CGjEik3MbkFmi6rPsSiO0J0=0MC0CFEAV5hPKLVSgV8YoeCEVu5m7
5ktkAhUA2lBI0PwiMigvK1E/pVS0vqmsy3w="
/>
<license
component="Clustered JMS"
expiration="2001-05-23"
ip="any"
licensee="BEA Evaluation Customer"
type="EVAL"
units="5"
signature="nEpfLZwWyM4Bo7UZZHE4hQgntMc=0MCwCFBKYtPvqZE18JdGBvU6cZomM
xW1cAhR3moJKg7FHMxvsZphQz5jVCahrfA=="
/>
<license
component="jDriver/MSSQLServer4"
expiration="2001-05-23"
ip="any"
licensee="BEA Evaluation Customer"
type="EVAL"
units="5"
signature="Dgw2DzDWyBNob6pJunUY1Xoz7c8=0MC0CFQC4PKj8UFoC3J0XuC7pmzRL
TtgP8QIUAhJF5DuvZ10zvf/6mxe0Ti/rG4c="
/>
<license
component="jDriver/Informix4"
expiration="2001-05-23"
ip="any"
licensee="BEA Evaluation Customer"
type="EVAL"
units="5"
signature="6O/i8fVnKIeVwzz+e0zUMQL5uRU=0MC0CFH+NK7nnRm+Qp+qRXZdeV2yF
6YxdAhUA3vch2xTdmM5Ao+00+IOR5f3jGH0="
/>
<license
component="jDriver/Oracle"
expiration="2001-05-23"
ip="any"
licensee="BEA Evaluation Customer"
type="EVAL"
units="5"
signature="NtSVpPAloTJqBstOWKVnuh3q0H4=0MC0CFA+2ny24Zdyrb0lsL3duwfEB
9zKMAhUAqDtTbLMN3QfJWUVhJr+NBQU/x/k="
/>
</license-group>
</bea-licenses>Gotta add listeners.ContextListener to your CLASSPATH
in Eclipse.
I don't think that package name is right. You've got
another problem besides your context XML.
%The context XML may not be the problem at all. Such tomcat errors are standard when it was unable to load required classes on startup.
The listeners all being interfaces, it's impossible to say whether it is the standard listeners or custom listener classes (regd in your web.xml) that's not being found on startup.
cheers,
ram. -
R12.1.1 upgrade driver failed due to OKC user connectivity (RHEL 5.9)
Hi Team,
I was in the middle of the R12.1.1 upgrade and the driver failed due to OKC user connectivity .
I have checked all the possibilities.
Please let me know how to proceed from here. Though I restarted the patch it is failing due to OKC user login denied.
Assigned: file as_accesses_n17.xdf on worker 1 for product as username APPS.
Assigned: file cnpln.odf on worker 2 for product cn username CN.
Assigned: file invtxhi.odf on worker 3 for product inv username INV.
Assigned: file mscplan.odf on worker 4 for product msc username MSC.
Assigned: file MSC_SYSTEM_ITEMS.xdf on worker 5 for product msc username APPS.
Assigned: file OKCDAUT.odf on worker 6 for product okc username OKC.
Assigned: file OKCDSUP.odf on worker 7 for product okc username OKC.
Assigned: file OKCOTH1.odf on worker 8 for product okc username OKC.
Assigned: file OKCPTY1.odf on worker 9 for product okc username OKC.
Assigned: file OKCREP1.odf on worker 10 for product okc username OKC.
Assigned: file OKCSHD1.odf on worker 11 for product okc username OKC.
Assigned: file OKCVARL.odf on worker 12 for product okc username OKC.
Assigned: file OKCXRPT.odf on worker 13 for product okc username OKC.
Connecting to OKC......Unable to connect.
AutoPatch error:
The following ORACLE error:
ORA-01017: invalid username/password; logon denied
occurred while executing the SQL statement:
CONNECT OKC/*****
AutoPatch error:
Error while evaluating "Check Object"
Telling workers to quit...
2 workers have quit. Waiting for 14 more.
12 workers have quit. Waiting for 4 more.
13 workers have quit. Waiting for 3 more.
15 workers have quit. Waiting for 1 more.
All workers have quit.
AutoPatch error:
Error running SQL and EXEC commands in paralleluser11962637 wrote:
Hi Srini,
Thank you for the update.
The password is working fine no issues with the connectivity from my end, but upgrade driver is failing with the same error.
sqlplus apps/apps
SQL*Plus: Release 10.1.0.5.0 - Production on Fri May 17 18:18:03 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> conn okc/okc
Connected.
SQL> conn system/crp2system
Connected.
SQL> exitThis will happen if you change the password using the ALTER USER command rather than using the FNDCPASS executable
Srini -
"failed due to bad configuration"
I have a .air program running on nearly 400 pc's in the field. I have an upgrade I would like to release silently. I can get the new .air file to the machines automatically. I would like to run a batch file that will install it, and hit the "Replace" button when it notices that a older version is already out there.
So, I included the Adobe Air Application Installer.exe in the download, I created a batch file that does this:
"Adobe AIR Application Installer.exe" -silent -eulaAccepted -desktopShortcut "C:\Program Files (x86)\MascoVSC\vscassets\program\VSC.air"
THis runs perfectly when the old version is not on the machine, but if it is, I get the error: "failed due to bad configuration".
Any help would be greatly appriciated.Hi Jeff,
Could you give the ARH tool a try and in the case of an update, do an uninstall first, then install?
Binaries:
Mac: http://airdownload.adobe.com/air/distribution/latest/mac/arh
Win: http://airdownload.adobe.com/air/distribution/latest/win/arh.exe
Linux: http://airdownload.adobe.com/air/distribution/latest/lin/arh
Documentation:
http://help.adobe.com/en_US/air/redist/WS485a42d56cd19641-70d979a8124ef20a34b-8000.html#WS fffb011ac560372f117f43a112b21f7d88d-8000
Thanks,
Chris
Maybe you are looking for
-
Music downloaded on my iPod can't be read in iTunes anymore
Hello, I've a certain number of songs on my iPod (30Gb Photo) that were downloaded from iTunes - I still have the Music Store Receipts -, that can't be played now on iTunes ... by the side of the song in iTunes there is an exclamation point. Is there
-
Programatic import can't clear out a property of data-type="set"
Our catalog repository has a item-descriptor for a "sku" that has a property named "modelProfiles" which is a data-type="set". This allow our SKUs to have a one-to-many relationship with ModelProfile components. We programmatically import and update
-
SYSDBA does not have privilege to create user
I have a fresh Oracle Database 11.1.0.7.0 installation. I am able to connect to the database using either of the following commands from Linux : sqlplus "/ as sysdba" sqlplus "sys/pwd as sysdba" But after I connect, I am not able to create user. Foll
-
PR generation of Alternate item of BOM
Dear Gurus, I have a BOM with alternate item group maintenance among 2 item material. Those item group has maintained with proper priority and usage. Now I have a requirement of header item and the priority 2 material has some stock. Therefore, I wou
-
I have just renewed my PC ( old one self destructed) and want to re- down load my purchased files onto my new computer. How do I do this?