Deploying a Flex iPad App wirelessly without registering a device's UIUD

Hi
Is there any information or step by step guide to building and deploying a Flex iPad app wireless, without registering the device's ID? Is this possible with Flex? We do have an iOS Developer Enterprise Program license. Every set of instructions from a Flex point of view that I have read assume that either 1) The release build will be deployed through iTunes or 2) the release build will be deployed to device who's ID are registered on the Apple dev center. Any help would be appreciated.
The problem is that when attempting to install the app on a device that is not registered on the apple site, an error occurs stating that the app was unable to download/install.

Hi Emanuele,
In your case, SUP would provide the development tools, framework and APIs to easily handle the authentication, synchronization etc. You wouldn't need to define your own synchronization mechanism, it's in the product. Now if the updates are only sent from the server to the mobile devices, this shouldn't be to difficult to handle even without SUP.
You could easily create REST Web Services using Gateway and then consume them using the mobile devices. You don't want to consume SOAP Web Services using a mobile application, trust me. You could do this using the ICF (Internet Communication Framework) to achieve this but again it would be easier with Gateway.
You don't necessarily need SUP or Gateway to create only a simple mobile application. But then if your customer is happy with their first mobile application, they'll want more. And then products such as SUP or Gateway can make the difference. These products prodvide a standard development environment, tools to manage the apps and the users etc. With multiple mobile apps connected to multiple back-ends with more and more users, you'll need a middleware to manage all this and make sure the performance is great.
Usually people don't use SUP or Gateway for their first mobile application but then they start to see the benefits of mobility and they want more. And then they start to realize the benefits of these products and they understand that a real mobile strategy has to be defined etc.
Regards,
Pierre

Similar Messages

If my ipad was stolen and i havent signed up for find my ipad app will it show the device offline and pending lost mode still?

wondering if i never signed up for the locate my ipad app if it would show my stolen device as offline and pending lost mode or if that means that i did sign up for it and just dont remember?

If it is showing up as Offline and also shows Lost Mode as Pending, then you did turn on Find My iPhone. Otherwise, you wouldn't see the device at all when you went to Find My iPhone in iCloud. If someone turns on the device and connects to the internet, then your pending Lost Mode transaction will process, and a lock code will be placed on the device. It will also show up on the map to show you the location.
However, if it does not come back online, then you won't be able to track it, nor will the lost mode command execute.
Sorry,
GB

Is there away to authenticate the iPad to Wireless without a username and password? (i.e. Device Authentication)

I am contracting for a college and they want to automatically configure 30 iPads for use on their enterprise wireless network.
Current wireless settings are 802.1x using PEAP MSCHAPv2. Users authenticate using their Active Directory accounts. They do have a few PCs setup to do machine authentification using the machines AD account. Is there any equivalent for the iPad?
They are willing to open a new SSID if they need to go to another authenication method in order to use certificate authenication.

Is Radius involved?
http://images.apple.com/au/ipad/business/docs/iPad_WiFi.pdf

Why my ipad apps closes without my past closed and they do not update my facebook??

Please help me

Did you try downloading another app? Any free app will work or any previously purchased app that is not on your iPad will also work.

Can I track course/delegate iPads and wirelessly install apps?

Hello all,
I work in an institution where we deploy 80 iPads a day to delegates for the duration of their stay with us.
At the moment, we are unable to find a suitable location tracking solution, for when the iPads go wandering. As you can guess, we have had a couple over the years go missing, but have been fortunate it has only been a couple.
For our staff devices(not limited to iPads) we use Systems Manager/Meraki. But there are serveral reasons why we cannot use this for our delegate. I will detail some of them below:
We deploy the iPads day to day, using Configurator to wipe and load them, ready for the next person, this clears the enrollment settings, meaning we would spend hours each morning getting the devices enrolled as we would have to repeat this for each person
The location tracking is inadequate, as it tracks by IP, not giving us a realistic picture of where the iPads are when trying to find them
The beta location tracking feature is only a beta and we would need something reliable long term and short term
As all of the devices are 'supervised' we would preferably like a solution which could be used with Configurator.
Finally, we would like to be able to push out apps wirelessly to the devices on our network, this would be useful for last minute requests. We currently don't have anything in place for this and wondered if others are having the same issue, or have a good solution.
Thank you in advance for your help.
iPad info and software
80x iPad 4's
iOS 8.1
Apple Configurator 1.7
Meraki Systems Manager (Free)
Kind regards,
Darren

Maybe you should check with AirWatch
If you want additional features that the application provides such as GPS tracking, telecom collection, and compromised detection, it is recommended that you push the AirWatch MDM Agent as a public application through the console. You will be prompted to install this application, as usual behavior after enrollment, once completing the Setup Assistant.
Here is what Apple says is possible. It lets you display the location of the ipad if it is network connected. If you secure you ipad, the mdm acts as a replacement for the activation lock.
If your iPhone, iPad, or iPod touch is lost or stolen - Apple Support

Is is possible to package Flex 3.6 app as iPad app?

I'm using FlashBuilder 4.6. I have a browser version of my app using Flex 3.6 that handles touch events, suppresses the system keyboard and some other stuff so it runs well on Android browsers in the browser. I'd like to use this same code to produce an iPad app without having to port to Flex 4.6. If I create an AIR app using Flex 3.6, can I run the packager against my .swf file directly to produce an iPad app? Thanks for your help.

I always run the a portable version out of a folder at first.For a few weeks anyway.Then if it runs OK I install as my main browser.It always gives me a chance to sort out which add ons work and which don't.Until I get all the add ons I want working right I keep using out of a folder.
I just put a short cut on the desk top.

Is it possible to print wirelessly (WITHOUT A WI FI INTERNET CONNECTION) .Using my ipad 3 to an HP air printer.

Is it possible to print wirelessly (WITHOUT A WI FI INTERNET CONNECTION) using my ipad3 and a HP air printer ?.

Christina,
The purpose of the AirPrint system was to permit printing directly from iDevices to printers that are AirPrint enabled without going through an intermediary device. The catch is the printer must be an AirPrint enabled printer. The iPad's apps will then recognize the printer and print seamlessly. Follow the link Demo gave you to see the specifics from HP since that is the printer you asked about using.

Airport Extreme wireless network can't find my HD-DVR, thus my iPad App, DirecTV, won't work. Please help.

My Airport Extreme will not allow my HD-DVR (DirecTV) to connect to the wireless network. All my other wireless stuff (iPhone, iPad, MacBook Pro) all work fine. My network name is all lower case, no punctuation, no spaces. Therefore my iPad App, DirecTV, cannot find my TV, and I cannot use its features. I am so frustrated. DirecTV came out to my house today and told me it's all Apple's fault. I can hardly believe that! Please help - TIA!

Plug a LAN port of TC by ethernet directly into the computer.
Unplug the TC so it is fully isolated from the network.
Do a full factory reset of the TC.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
I generally prefer to do the setup by ethernet alone but the new airport utility seems mighty wireless orientated. You might need to power off the modem and AE and everything else so you can pick up just the TC. But check that it doesn't work by ethernet first. Otherwise go to the wifi and you will see the TC listed as new device in the list of wireless AP's available.. click it and it will open the airport utility.
Once you get into the TC give it all short names, no spaces and pure alphanumeric.
I would also not turn off its wireless.. there is no need. Just give wireless the same name as the AE, same security setting and password.
Put the TC in bridge mode.
Once you complete the setup .. update the TC and put it back into the network.. if you have not already done so.. restart the whole network.. restart in correct order.. modem.. AE.. TC with 2min between each one.

IPAD App for SAP without Middleware

Hi experts,
I am new about mobility topics and I am involved in a new project that consists in developing iPAD apps using data from SAP ECC and saved into the tablet.
In my business scenario there will be about 1.000 users that need to synchronize data from SAP ECC with the following characteristics:
Volumes
Basically there are 2 type of data to store into the iPAD:
Clients assigned in Portfolio (about 1500 clients per User to download)
Static data (i.e. configuration table/parameter)
Let's assume that the size of data exchanged is about 3 Megabyte
Frequency
The initial upload has to be made once a year and thereafter once a day it should be checked for updates
At the very present time we are supposing to use web services calling SAP ECC in order to retrieve and store data.Is there any particular drawback in doing it without a Middleware?
I have heard about Sybase, but I cannot find the real advantage since it seems to be another database where data can be replicated into it. As for the device management console, my client is adopting yet AirWatch.
I have also heard about SAP Netweaver Gateway but I cannot catch the real advantage into using it.
Thanks
E.

Hi Emanuele,
In your case, SUP would provide the development tools, framework and APIs to easily handle the authentication, synchronization etc. You wouldn't need to define your own synchronization mechanism, it's in the product. Now if the updates are only sent from the server to the mobile devices, this shouldn't be to difficult to handle even without SUP.
You could easily create REST Web Services using Gateway and then consume them using the mobile devices. You don't want to consume SOAP Web Services using a mobile application, trust me. You could do this using the ICF (Internet Communication Framework) to achieve this but again it would be easier with Gateway.
You don't necessarily need SUP or Gateway to create only a simple mobile application. But then if your customer is happy with their first mobile application, they'll want more. And then products such as SUP or Gateway can make the difference. These products prodvide a standard development environment, tools to manage the apps and the users etc. With multiple mobile apps connected to multiple back-ends with more and more users, you'll need a middleware to manage all this and make sure the performance is great.
Usually people don't use SUP or Gateway for their first mobile application but then they start to see the benefits of mobility and they want more. And then they start to realize the benefits of these products and they understand that a real mobile strategy has to be defined etc.
Regards,
Pierre

I have a iPad and a iPod touch how do I sync both of them to iTunes without mixing the apps, my iPad apps shows up on my iPod which is not good because I only have 8G on the iPod, I would like to keep them separate

I have a iPad and a iPod touch how do I sync both of them to iTunes without mixing the apps, my iPad apps shows up on my iPod which is not good because I only have 8G on the iPod, I would like to keep them separate

Turn Automatic Download off
Settings>iTunes and Apps Store>Automatic Download>Off

Using Weblogic to Deploy Simple Flex App

Hi,
   I am trying to deploy a simple Flex application in a weblogic8.1 server , so that I can use it locally.
Can any one please guide me where and how I have to deploy my flex app .
I am pretty new to this can any body provide me a guide or walk through step wise for me.
More over What is the url I need to give in the browser to access the flex app I deploy in the Weblogic server.
(At present I am using the IIS -- just copying the .swf file and wrapper html page in to the C:\Inetpub\wwwroot and giving http://localhost/test.html
in the browser to access it) --- How do I do this using Weblogic 8.1
thanks
Nash

Hi again Nash,
the stuff I am doing at present is not yet permitted to be publicly available, but the principles are very straightforward. Remember that WebLogic is primarily concerned with server-side functionality and Flex with client-side, so there is not really a great deal of overlap. The place where your Flex instantiation code will sit is in one or other JSP, using code very like the templates that Adobe generate. The only thing you have to do is ensure that your JSP (or the controller/code files behind it) generate HTML that contains the necessary. I tend to use the Apache Beehive libraries for UI stuff, but from vague memory I don't think these were around in WL8 - however, it doesn't really matter what tag library you prefer as all you are doing is generating HTML that looks like the usual JavaScript calls to AC_FL_RunContent (or swfobject if you are using that method). Basically, just take the Adobe-generated template and wrap the necessary bits and pieces round the edge to make it a proper JSP.
When you need to make calls to get functionality, just use something like
                    service = new HTTPService();
                    separator_date = new Date();
                    service.url = "get_tool_list.jsp?sep=" + separator_date.valueOf();
                    service.addEventListener(FaultEvent.FAULT , fault_handler);
                    service.addEventListener(ResultEvent.RESULT, resultHandler);
                    service.resultFormat = "text";
                    CursorManager.setBusyCursor();
                    service.requestTimeout = WEB_SERVICE_TIMEOUT;
                    service.send();
and then inside get_tool_list.jsp (or whatever...) do the server-side functionality you need, and return the result in a suitable format that the Flex resultHandler method can then interpret and make use of.
Hope that helps,
Richard

HT201304 I need to restrict access to Settings on an iPad so settings like VoiceOver cannot be activated while letting them access multiple apps on the device. Is their any way to restrict access to settings without locking the device with a PIN?

I need to restrict access to Settings on an iPad so settings like VoiceOver cannot be activated while letting them access multiple apps on the device. Is their any way to restrict access to settings without locking the device with a PIN?
This is so our guests cannot tamper or disable the device. We are already using Apple Configurator but their does not seem to be a way to lock down settings without a PIN.

There's a lot of restrictions information in Chapter 19 of the 4.2 User Guide.
http://support.apple.com/manuals/#ipad
By the way, a more extensive version of the User Manual is available at no charge through iBooks.

HT4059 Can I sync PDF files from my iPhone 4 to my new iPad wirelessly without iTunes?

Can I sync PDF files from my iPhone 4 to my new iPad wirelessly without iTunes

Yes, you can. Just add files to iTunes library (FILE > ADD FILES TO LIBRARY....) and they will appear under Books library.
Connect you device, select the Books tab, and make sure those books or pdf you want them over are being checked, then click the SYNC button on the lower right window.

Unlock an ipad app without the already purchased option

Does anyone know how to unlock an iPad app without the already purchased option?

Or do you mean how do you unhide an app? You hide apps from the purchased tab so I am taking a guess here.
Unhide Purchases on iPad
http://support.apple.com/kb/HT4919
Depending on the content type, open the App Store, iBooks, or iTunes Store on your device.
Scroll to the bottom of the main page.
If you're not already signed in, tap Sign In.
Tap your Apple ID name, then tap View Account.
Scroll down on the Account pane, and tap Hidden Purchases.
Locate the item you would like to unhide then tap the Unhide button.

How can i register app store without credit card

how can i register app store without credit card

You need to follow the instructions on this page when creating a new account : http://support.apple.com/kb/HT2534
If you don't use those instructions when creating an account then you will need to enter credit card details (which you should be able to remove after entering it) before the account can be used to download any item from the store.

Deploying a Flex iPad App wirelessly without registering a device's UIUD

Similar Messages

Maybe you are looking for