Deploying a track to another server

We are using NWDI and we are in the middle of development. We have successfully setup the runtime systems such as dev and consolidation systems. Everthing is working fine. Now we have a request to demo this application from a different server other than the dev and consolidation but within the same landscape. The track involved in this contains 6 Software Components.I am thinking of using the "Export" option in the "Development" under "Transport Studio". Then copy these SCA's to the destination server and use SDM to deploy the application in the destination server. Is this a good approach?
Other approach i have is temporarily change the development runtime system and initiate the deployment. After it succeeds change the runtime system to the original system.
Please advice.
Thanks
RT

Hi,
If the transport to the "demo" system, i.e deployment is going to be one time activitiy, then the approach mentioned is correct, as it does not involve too much of procedure and is readily doable.
But, if it is to be repeated many numebr of times, as and when you proceed with the development, then a track can be established with the runtime server as the demo system and Track Connection can be created between your development and Demo system.
For more on track connections, refer [this help.sap.com|http://help.sap.com/saphelp_nw04s/helpdata/en/13/602b27f6fb41b4a9eb4f72eabb9832/frameset.htm] page.
Regards,
Alka.

Similar Messages

Migrate tracks from one server to another

Hello, I've read a few guides how to migrate tracks from one server to another, but it doesn't help me.
What I've done:
1) I've exported my SC from SLD at my old server
2) Then imported it at my new server
3) Updated CMS from SLD
4) Created a track at my new server and added imported SC
Then I have to import my SC from old server with sources and there is some errors happens for me.
First option: I have exported my SC from CMS, but the SCA file is about 5kB. I unzipped it and there was ARCHIVESOURCE folder but it hasn't anything seems to be my sources. That file is checked-in successfully through the transport studio, but no sources imported into DTR.
Second option: I have exported the SCA file by using NWDS. It's exported OK, size ~1.3MB, ARCHIVESOURCE folder with mine sources. But when I try to check-in it, it fails with an error "import failed, because the sources are not contained in the archive
Could anybody helps me to achieve my task? I stuck with source import.

Hi Kirill,
important to know that assembly ALWAYS uses the CONS/ACTIVE workspace for SCA generation.
If you for instance create a change (an activity), and you activate and release it but you don't import this activity into CONS, then it won't be part of the CONS/active and then due to obvious reasons assembly won't produce the sources either (no possibility to do an explicit activation on cons level as here a force activation takes place at import, but of course the import into cons is a necessary step, because as mentioned assembly uses the cons/active).
Can you please confirm/deny how this scenario looks like on your end?
Thank you!
Best Regards,
Ervin

How to install SSRS project on another server where there is no SSDT?

Hi!
I have a developer environment with SSDT and My SSRS project.
How do I install the whole project with Shared Dataset, shared DataSource, Reports to another server, where doesn't SSDT?
P.s. I can't connect to client server with my visual studio from my developer environment.

Hello,
What exactly do you mean with "install project"? Do you mean to deploy created reports? You can e.g. manually upload the report files (.RDL) via Report Manager UI. Or do you mean to edit the project on an other machine? Then you have to install SSDT or at
least Report Builder 3.0.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Error deploying JDBC driver for SQL Server 2005

Hi all
I'm trying to deploy a JDBC driver for MS SQL Server 2005 (downloaded [here|http://www.microsoft.com/downloads/details.aspx?familyid=C47053EB-3B64-4794-950D-81E1EC91C1BA&displaylang=en]). When I try to deploy it according to the instructions found [here|http://help.sap.com/saphelp_nwce10/helpdata/en/51/735d4217139041e10000000a1550b0/frameset.htm] it fails.
The error in the logs doesn't give any useful information though. It only says Error occurred while deploying component ".\temp\dbpool\MSSQL2005.sda".
Has anyone else deployed a driver for SQL Server 2005, or perhaps have any suggestions of what else I could try?
Thanks
Stuart

Hi Vladimir
That's excellent news! Thanks for the effort you've put into this. I'm very impressed with how seriously these issues are dealt with, specifically within the Java EE aspects of SAP.
May I make two suggestions on this topic:
1. Given that NWA has such granular security permissions, please could the security error be shown when it is raised? This would help immediately identify that the problem isn't actually a product error, but rather a missing security permission (and thus save us time and reduce your support calls).
2. Please could the role permissions be clearly documented (perhaps they already are, and I just couldn't find the docs?) so we know what is and isn't included in the role. The name is very misleading, as a "superadmin" is generally understood to have no limitation on their rights - so clear documentation on what is in-/excluded would be most helpful.
On a related topic, I came across another issue like this that may warrant your attention (while you're already looking into NWA security issues). I logged a support query about it (ref: 0120025231 0000753421 2008) in case you can retrieve details there (screenshots, logs, etc.). It's basically a similar security constraint when trying to create a Destination. I'm not sure if this is something you would like to include as standard permissions within the NWA_SUPERADMIN role or not, but I think it's worth consideration.
Thanks again for your help!
Cheers
Stuart

How deploy my application in isp server how give javaderby backup to isp

hi master
sir i use stuido creator with derby database
sir test this web application in my computer that give me right result
sir how i deploy my this application in isp server,
which file i give to isp that they past in thier server and give me address that i use on net
how i give database to isp how i get backup of java derby and how add new table in java derby
please give me idea
thank's
aamir

I am new at this also, so I don't know if this helps... It is based on what I had experienced with...
There should be a "webapps" directory in any tomcat installation, I don't think it matters if it is a Linux server or NT server or a local box.
We put the WAR file inside the webapps directory, and I believed we had to restart the Tomcat service for tomcat to "recognize" the change and then automatically "expand" the war file. Accessing it from the Web will not cause the WAR file to expand... I think :D I don't think your "web hosting" company would have given you "admin" right to restart tomcat unless he/she is a good friend of yours; so you might have to ask them to do it for you... I know it sounds stupid, but I also think that tomcat need to connect with another server such as Apache, so Apache need to be running also (or some Web server that can deal connect to Tomcat); do you know what web server is running on this web hosting? I would assume Apache, but I am always paranoid about these things:D
Anyway, that's as much as I know about the subject...

Abap project into another server

Hi guys,
I have got a small projects which contains a screens, Pf-status, tcode, table, etc.I have it in a different Package, I have to club them into a single SAR file.
The purpose is to install the same in a different server of another client, For example : patches released by SAP they have different objects get installed when we apply patch.
Any Idea,
Points assured
regards,
Prabhu
Edited by: prabhu jayaraman on Jun 5, 2008 2:47 PM

OSB does not provide ability to selectively deploy services on a particular server in domain.
For Clusters, when you import and activate, artifacts/services are deployed to all managed server in OSB cluster.
For non clustered topology, http://download.oracle.com/docs/cd/E14571_01/doc.1111/e15022/intro.htm#CEGFIAEG
you can only have one OSB server in domain. Other managed server in domains can host other products (SOA/EM etc)
Hope this helps
Manoj

Move Web Analyzer component to another server

Hi All,
I have to switch the Web Analyser component to another server in the same FARM.
Is there any steps available to move the service without any data loss?
Web Analyser component can be created by updating the deployment.xml file in Admin server. But how we can webanalyser files available in %FASTSEARCH%/data folder?
Thanks
Soulwin

Hi,
The way to move mailboxes from one database to another database is available. When you move a mailbox, you're moving it from a source mailbox database to a target mailbox database. The target mailbox database can be on the same server, on a different server,
in a different domain, in a different Active Directory site, or in another forest.
You can refer to the following articles:
New-MoveRequest
http://technet.microsoft.com/en-us/library/dd351123(v=exchg.150).aspx
Mailbox Moves in Exchange 2013
http://technet.microsoft.com/en-us/library/jj150543(v=exchg.150).aspx
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Can I deploy web service on APEX server

I have APEX 3.1.2 on 11g database.
I need to pull data from other oracle 9i databases into APEX application. I have created web service on my pl/sql package to pull data from 9i databases and deployed service on my local oc4j instance (within jdeveloper). My APEX app pull data from multiple oracle 9i database. Now I need to move my web service to my dev/test environment.
Can I deploy web service on APEX server? or do I need to deploy on another web server?
I know I can easily pull the data from other oracle 9i databases using DB link. I want to explore Web services option to just to see is it possible to pull data from multiple sources into APEX app using web service running from APEX server?.
Any help on this will be appreciated.
RK Shah
Edited by: RK Shah on Apr 7, 2009 7:27 PM

I am in the same situation. Consuming a web service is easy with APEX. But publishing one needs a web server that is more complex than the one that comes with APEX for free.
I am exploring the possibility of building the web service in Jdeveloper as you have. Then I will make a WAR file that I will publish to an apache tomcat J2EE server that another department runs. I believe it will work since all the components required should be in the WAR file.
I am new at this. I will let you know how it works out.
The other possibility is to upgrade the appserver to the full Oracle Fusion server (maybe). This may be expensive and be too much for just a simple web service. But then the publish to application server from jdeveloper is super easy.

When to add another server?

Hello Community
    When using Windows Server and the hard disk starts getting full,
you can add another hard disk or when you don't have enough memory
you can add more memory.
    So when you are running out of hard disk space or memory
when do you have to add another server instead of adding more hard disks
or when do you have to add another server instead of adding more memory?
    Thank you
    Shabeaut

Hi,
It is hard to say when to add another server, this mostly depends on the requirements of your environment.
And before the setup action, it's better to have a good design of the deployment.
In addition, here is a WIKI talking about Capacity Planning for Active Directory Domain Services,
see:
Capacity Planning for Active Directory Domain Services
http://social.technet.microsoft.com/wiki/contents/articles/14355.capacity-planning-for-active-directory-domain-services.aspx
More information here:
Identifying Your AD DS Design and Deployment Requirements
http://technet.microsoft.com/en-us/library/cc771518(v=ws.10).aspx
Hope this helps
Best regards
Michael
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Generating pdf using ADS on another Server failed

Hi there,
I am trying to generate a pdf-document using Adobe Document Services installed on another server.
It's a Visual Composer app, which opens a Web Dynpro component to generate the pdf. Everything works fine when I run the app on a server, which has Adobe Document Services installed.
But when I try to run the app on a server without ADS installed and want to use ADS on another server (both NW 7.3 SPS4) it fails with and FileNotFoundException.
The log of the ADS-Server says, that it cannot found the file located in <PATH TO THE XDP-FILE ON THE APP-SERVER>. It's sure, that the server cannot find the file, because it's not deployed there!
It seems that the Application calls the Adobe-System which trys to find the template on its own file-system.
Does anybody know the mistake here?
Any help would be greatly appreciated
Edited by: Bernd Speckmann on Oct 17, 2011 10:31 AM

The problem was, that I was passing xdp template source as url .
Instead I should send it as a stream using the appropriate pdfdocument api.

Robohelp 7 App is really slow in deploying files to the remote server - Why?

Hi,
I am totally new to RoboHelp. So Please forgive my ignorance!
The Robohelp we have was developed by somebody who is not with our company anymore. I think he used Robohelp 5 to develop our Policies and Procedures. The files are deployed on one of our remote server. (Do the server have to have Robohelp installed as well?? I checked the server to find if it has Robohelp installed and I could not find it?)
One of our Analyst has Robohelp on her PC. She used to have Robohelp 5 and now she has Robohelp 7 to deploy the files to the server.
It was working perfectly fine till she used Robohelp 5. Deploying the files to the server took about 2 hours before and now with Robohelp 7 on her PC, it takes forever and we are unable to deploy the files to the server from RoboHelp application!
What should I be doing to make it faster? Please let me know. Thanks in advance!!
Uma

Hello again
Well, ummm, how shall I put this? YIKES! The page you linked to is for RoboHelp 9. Now you may be scratching your head at this point and saying waitadoggoneminnute there MR. Man!What gives?
Here's the deal. Way way back when a little company called eHelp corporation held the reigns, RoboHelp was at version 7. Then version 8 came along but wasn't really called version 8. It was called version 2000 because it was released in the year 2000. Then they published version 9. Then came version 10 and that one was called version 2002. Then version 11 shipped but was called X3. Then version 12 shipped and was called X4 and finally "lucky" version 13 arrived and was called X5. Enter another small company known as Adobe. Adobe saw the 5 and decided to name their next version "6".
This wouldn't really be much of a problem, EXCEPT, we now see material that is grossly outdated that would seem to apply to today's versions and of course they are wrong!
So here's where it gets fun. Note that the date of the article you pointed to is October, 2000. Nearly ten years old! I'm guessing that the dialogs you are seeing are a wee bit different than what are on that page.
So just to be complete:
When you double-click the WebHelp layout you see the first of several dialogs. It usually looks like this:
Note the highlighted part. This is the location where WebHelp will generate to as well as the name of the Start Page. Oftentimes folks configure this location to be the location where everyone points to open the WebHelp from the connected PCs. And if this is the case, that is likely the reason the process is so slow.
The location specified here should always point only to the C drive.
If you click the Next > button three times you should see the screen below.
THIS is where you would want to configure the publishing destination.
So you should have two actions. One action creates the files and the second action Publishes (or copies) the files from the C drive to the server.
Note that none of the options have been enabled in the dialog above. That's typically the preferred way to work. You only need to enable these options under specific conditions. So if you have this configured but have enabled perhaps the Republish all option, perhaps that would also explain the slow operation.
Hopefully this helps... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 moments from now - $24.95!
Adobe Certified RoboHelp HTML Training
SorcererStone Blog
RoboHelp eBooks

Export Cube on another server

Hi to all,
I've created a cube in AWM and generated corresponding view using plug-in "View Generator" stored under the schema "MMGDWH" of my local Oracle Database on my machine (Windows machine).
Then, I've created an offline rpd using "BI Administration Tool" which connect to local MMGDWH schema and use view object previous created to perform operations. Finally i can view result on Answers.
Now, I must deploy rpd on another server (Unix) which NOT SHARE same schema. What are objects created by AWM and Administration Tool under local MMGDWH schema that I must export, so all continue to be ok???????.
Thanks
Giancarlo

Hi;
1. You can go wiht clone database option for your issue:
Duplicating Database
Also see:
How To Make A Copy Of An Open Database For Duplication To A Different Machine [ID 224274.1]
2. If you want to use datapump than see:
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:1463976400346989259
Regard
Helios

Hi, i am trying to open and view a report that comes from another server with different odbc connection

hi, i am trying to open and view a report that comes from another server with different odbc connection
i created a crystal report for a mysql database on my machine and everything works great
but we have other reports that come from other machines with different odbc connection
and this its not working when opens the report asks for credentials
and i cannot use the remote ip for these reports that come from other machine
question
if i cannot connect to remote ip to open the report
for each report i have to create a database the report database on my machine and then open the report ?
or there is some other way to open the report ?
i am using visual studio 2013 and mysql and
<add key="MYSQLODBCDRIVER" value="{MySQL ODBC 5.3 UNICODE Driver}"/>
thanks

short
i have a report that it was created on another server with a specific dsn
now i am trying to open the report on my machine
the database from the other server does not exist on my machine
the server machine where the report was created the ip its not accessible
question ?
can i open the report on my machine or its impossible ?
thanks

How can I move the ODI Work Repository from one server to another server?

How can I move the ODI Work Repository from one server to another server?

Hi,
If you would like to move your source models, target models and project contents from Work repository 1 to another work repository.
I.e. Dev. server to Prod Server.
1. Firstly, replicate the master repository connections i.e. with same naming conventions manually
2. Go to Dev. Server work repository -> File Tab -> Click on Export work repository (save it in a folder)
3. After exporting, you can view the xml files in the folders.
4. Now, Open the Prod. server and make sure you already replicated mas. rep. details.
5. Now, right click on model and import source model in synonym mode insert_update (select source model from the folder where your xml file located)
6. Similarily, import again target then Project.
Now, check. It should work.
Thank you.

Problem to deploy ADF application on tomcat server

Hi all,
i 'm using this tutorial link to deploy adf application on tomcat server.
https://blogs.oracle.com/dana/entry/how_to_deploy_a_11g_adf_applic_1
but when i have run my application i have got following error
java.sql.SQLException: invalid arguments in call
log-
Jul 29, 2013 11:35:16 AM com.sun.faces.config.ConfigureListener contextInitialized
INFO: Initializing Sun's JavaServer Faces implementation (1.2_04-b07-FCS) for context '/TestApacheApp_ViewController_webapp1'
Jul 29, 2013 11:35:19 AM oracle.adf.mbean.share.connection.ADFConnectionLifeCycleCallBack contextInitialized
SEVERE: ADFConnection mbean not registered for defaultApplicationName.
Jul 29, 2013 11:35:19 AM oracle.adf.mbean.share.connection.ADFConnectionLifeCycleCallBack contextInitialized
SEVERE:
oracle.jrf.UnknownPlatformException: JRF is unable to determine the current application server platform.
at oracle.jrf.ServerPlatformSupportFactory.getInstance(ServerPlatformSupportFactory.java:79)
at oracle.adf.mbean.share.connection.ADFConnectionLifeCycleCallBack.contextInitialized(ADFConnectionLifeCycleCallBack.java:82)
at org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:3843)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:4342)
at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:791)
at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:771)
at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:525)
at org.apache.catalina.startup.HostConfig.deployWAR(HostConfig.java:830)
at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:515)
at org.apache.catalina.startup.HostConfig.check(HostConfig.java:1231)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tomcat.util.modeler.BaseModelMBean.invoke(BaseModelMBean.java:297)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:836)
at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:761)
at org.apache.catalina.manager.ManagerServlet.check(ManagerServlet.java:1471)
at org.apache.catalina.manager.HTMLManagerServlet.doPost(HTMLManagerServlet.java:243)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:525)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
at org.apache.coyote.http11.Http11AprProcessor.process(Http11AprProcessor.java:857)
at org.apache.coyote.http11.Http11AprProtocol$Http11ConnectionHandler.process(Http11AprProtocol.java:565)
at org.apache.tomcat.util.net.AprEndpoint$Worker.run(AprEndpoint.java:1509)
at java.lang.Thread.run(Thread.java:662)
Jul 29, 2013 11:35:19 AM oracle.adf.mbean.share.config.ADFConfigLifeCycleCallBack contextInitialized
SEVERE: Failed to register config mbean for defaultApplicationName.
Jul 29, 2013 11:35:19 AM oracle.adf.mbean.share.config.ADFConfigLifeCycleCallBack contextInitialized
SEVERE:
oracle.jrf.UnknownPlatformException: JRF is unable to determine the current application server platform.
at oracle.jrf.ServerPlatformSupportFactory.getInstance(ServerPlatformSupportFactory.java:79)
at oracle.adf.mbean.share.config.ADFConfigLifeCycleCallBack.contextInitialized(ADFConfigLifeCycleCallBack.java:79)
at org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:3843)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:4342)
at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:791)
at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:771)
at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:525)
at org.apache.catalina.startup.HostConfig.deployWAR(HostConfig.java:830)
at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:515)
at org.apache.catalina.startup.HostConfig.check(HostConfig.java:1231)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tomcat.util.modeler.BaseModelMBean.invoke(BaseModelMBean.java:297)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:836)
at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:761)
at org.apache.catalina.manager.ManagerServlet.check(ManagerServlet.java:1471)
at org.apache.catalina.manager.HTMLManagerServlet.doPost(HTMLManagerServlet.java:243)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:525)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
at org.apache.coyote.http11.Http11AprProcessor.process(Http11AprProcessor.java:857)
at org.apache.coyote.http11.Http11AprProtocol$Http11ConnectionHandler.process(Http11AprProtocol.java:565)
at org.apache.tomcat.util.net.AprEndpoint$Worker.run(AprEndpoint.java:1509)
at java.lang.Thread.run(Thread.java:662)
Jul 29, 2013 11:35:19 AM oracle.bc4j.mbean.BC4JConfigLifeCycleCallBack contextInitialized
SEVERE: Not able to get Deployment Name
Jul 29, 2013 11:35:28 AM oracle.adfinternal.controller.state.ControllerState initializeRequest
WARNING: ADFc: Deserialization of session state detected but ADF scope HA support is not enabled. Please enable ADF scope HA support in the adf-config.xml file to ensure correct functioning of your applicaiton.
Jul 29, 2013 11:35:28 AM oracle.adf.share.http.ServletADFContext initialize
WARNING: Found wrong applictionScope sticking to oldContext for oldApplication defaultApplicationName, while the current one is null
Jul 29, 2013 11:35:28 AM oracle.jbo.uicli.mom.CpxUtils$Visitor logMainApplicationCpx
INFO: jndi:/localhost/TestApacheApp_ViewController_webapp1/WEB-INF/classes/com/in/jagran/view/DataBindings.cpx
Jul 29, 2013 11:35:28 AM oracle.adf.share.jndi.MDSBackingStore documentExists
INFO: MDS-00013: no metadata found for metadata object "/META-INF/connections.xml"
Jul 29, 2013 11:35:32 AM oracle.adf.share.http.ServletADFContext initialize
WARNING: Found wrong applictionScope sticking to oldContext for oldApplication defaultApplicationName, while the current one is null
Jul 29, 2013 11:35:33 AM oracle.adf.share.http.ServletADFContext initialize
WARNING: Found wrong applictionScope sticking to oldContext for oldApplication defaultApplicationName, while the current one is null
Jul 29, 2013 11:35:47 AM org.apache.coyote.http11.Http11AprProtocol pause
INFO: Pausing Coyote HTTP/1.1 on http-8086
Jul 29, 2013 11:35:47 AM org.apache.coyote.ajp.AjpAprProtocol pause
INFO: Pausing Coyote AJP/1.3 on ajp-8009
Jul 29, 2013 11:35:48 AM org.apache.catalina.core.StandardService stop
INFO: Stopping service Catalina
Jul 29, 2013 11:35:48 AM org.apache.coyote.http11.Http11AprProtocol destroy
INFO: Stopping Coyote HTTP/1.1 on http-8086
Jul 29, 2013 11:35:48 AM org.apache.coyote.ajp.AjpAprProtocol destroy
INFO: Stopping Coyote AJP/1.3 on ajp-8009

There is no guideline I know of as this depends on the app itself.
What you should do is to deploy the application onto a test server and check the metrics of the app over a defined period of time with a defined amount of traffic.
Timo

Deploying a track to another server

Similar Messages

Maybe you are looking for