Deploying DSCC on two different systems

hi,
i have installled and deployed dscc on one system,and i want to know whether we can deploy the war file-- dscc.war on another sytem and not the installation ,
i have tried to deploy the war file but i get the message saying
Directory Service Control Center not initialized.
The Directory Service Control Center requires a one-time initialization process to be run before it can be used. This initialization process needs to be done using the dsccsetup command line in /home/dscc/dscc6/bin.
but still the dsccsetup has been initialized before for that first system and is working fine,the second system which i deployed war file alone i get the above message.

Nothing has changed - you have 2 activations even with CC, meaning you can use the software on 2 systems non-concurrently.
Mylenium

Similar Messages

  • Report which reads data from two different systems

    Hi experts!
    By any chance, would be possible to create a report which is able to read from two different cubes and two different systems at the same time?
    Kind regards.

    Good afternoon Raul,
    It should be possible to create a multiprovider on the two different cubes from the two sources
    systems and report on this.
    Best Regards,
    Des

  • Two different system in ESS ABAP Webdynpro

    Hi Experts,
                Is it possible to connect two different system (ECC 6.0) in ESS with ABAP Webdynpro Technology (EHP5)? I know it is possible in Java Webdynpro (EHP4). Please advice.
    Thanks
    Jacob

    Hello Jacob,
    I would recommend to configure the Jcos to access your second system which will be much more used as the standard ones:
    ○     SAP_R3_HumanResources
    ○     SAP_R3_HumanResources_MetaData
    ○     SAP_R3_Financials
    ○     SAP_R3_Financials_MetaData
    ○     SAP_R3_SelfServiceGenerics
    ○     SAP_R3_SelfServiceGenerics_MetaData
    As for the Leave Request framework, this parameter is configured on the Iview via the Application Parameters. You can go on this via Content Admin as this is a field on the property on the iview.
    You should create a new JcO to the destination system of the Leave Request framework and to parameters add the
    sap-wd-arfc-useSys = JcoName.
    Please refer to the following link on how to create the Jco.
    http://help.sap.com/saphelp_rc10/helpdata/en/8c/cb3042366c0521e10000000a155106/frameset.htm
    Regards,
    Bentow.

  • How to compare the programs in two different systems

    Hi,
    I have two systems say A & B and i have the program say 'Z_TESTPROG'.
    How to compare the program in two different systems.
    Regards,
    Venkat

    Hi,
    Check the version in Utilities -> version -> version management in both servers is one option.
    Another one is using SE39 transaction.
    Regards
    Manasa

  • How to Configure a oracle R12 with RAC on two different  system .

    I have one laptop and one desktop
    Laptop----
    on laptop I have install vmware 8
    Host OS --win7
    Guest OS---linux 4
    Desktop ---
    On Desktop I have install Vmware 8
    Hosts OS --- Win XP
    Guest OS ---Linux 4
    Plz suggest How configure oracle R12 with RAC using both system .

    Hussein Sawwan wrote:
    on laptop I have install vmware 8
    Host OS --win7
    Guest OS---linux 4
    Desktop ---
    On Desktop I have install Vmware 8
    Hosts OS --- Win XP
    Guest OS ---Linux 4
    Plz suggest How configure oracle R12 with RAC using both system .If you want to configure RAC, then you must have the same OS installed on all RAC nodes -- See (RAC: Frequently Asked Questions [ID 220970.1], Does Oracle Clusterware or Oracle Real Application Clusters support heterogeneous platforms?) for details.
    Once you have the same OS, please refer to:
    Oracle E-Business Suite Release 12 High Availability Documentation Roadmap [ID 1072636.1]
    Using Oracle 10g Release 2 Real Application Clusters and Automatic Storage Management with Oracle E-Business Suite Release 12 [ID 388577.1]
    Using Oracle 11g Release 2 Real Application Clusters with Oracle E-Business Suite Release 12 [ID 823587.1]
    Thanks,
    HusseinHi Hussein,
    For Rac I am using both same OS (linux 4) for both nodes .
    Plz suggest its possible to install two nodes on different machine(diiferent virtual machine on different system ) .Can communicate both machine without any problem if its possible plz provide links.

  • Need suggestion for ISE distributed deployment model in two different data centers along with public certificate for HTTPS

    Hi Experts,
    I am bit confused about ISE distributed deployment model .
    I have two data centers one is DC & other one is as a DR I have  requirement of guest access service implementation using CWA and get public certificate for HTTPS to avoid certificate error on client devices :
    how do i deploy ISE persona for HA in this two data centers
    After reading cisco doc , understood that we can have two PAN ( Primary in DC  & Secondary in DR ) like wise for MnT (Monitoring will be as same as PAN ) however I can have 5 PSN running in secondary i.e. in DR ISE however I have confusion about HA for PSN .. since we have all PSN in secondary , it would not work for HA if it fails
    Can anybody suggest me the best deployment solution for this scenario ?
    Another doubt about public certificate :
     Public Certificate: The ISE domain must be a registered or part of a registered domain name on the Internet. for that I need Domain name being used from customer .
    Please do correct me if I am wrong about certificate understanding :
    since Guest will be the outside users , we can not use certificate from internal CA , we need to get the certificate from service provider and install the same in both the ISE servers
    Can anybody explain the procedure to opt the public certificate for HTTPS from service provider ? And how do i install it in both the ISE servers ?

    Hi there. Let me try answering your questions:
    PSN HA: The PSNs are not configured as "primary" or "secondary" inside your ISE deployment. They are just PSN nodes as far as ISE is concerned. Instead, inside your NADs (In your case WLCs) you can specify which PSN is primary, which one is secondary, etc. You can accomplish this by:
    1. Defining all PSN nodes as AAA radius servers inside the WLC
    2. Then under the SSID > AAA Servers Tab, you can list the AAA servers in the order that you prefer. As a result, the WLC will always use the first server listed until that server fails/gets reloaded, etc. 
    3. As a result, you can have one WLC or SSID prefer PSN server A (located in primary DC) while a second WLC or SSID prefer PSN server B (located in backup DC)
    Last but not the least, you could also place PSNs behind a load balancer and that way the traffic would be equally distributed between multiple PSNs. However, the PSN nodes must be Layer 2 adjacent, which is probably not the case if they are located in two different Data Centers
    Certificates: Yes, you would want to get a public certificate to service the guest portal. Getting a public/well known certificate would ensure that most devices out there would trust the CA that signed your ISE certificate. For instance, VeriSign, GoDaddy, Entrust are some of the ones out there that would work just fine. On the other hand, if you use a certificate that was signed by your internal CA, then things would be fine for your internal endpoints that trust your internal CA but for any outsiders (Guests, contractors, etc) that do not trust and do not know who your internal CA is would get a certificate error when being redirected to the ISE guest portal. This in general is only a "cosmetic" issue and if the users click "continue" and add your CA as a trusted authority, the guest page would load and the session would work. However, most users out there would not feel safe to proceed and you will most likely get a lot of calls to your helpdesk :)
    I hope this helps!
    Thank you for rating helpful posts!

  • Client comparision which are in two different systems

    hi
    here there is a different issue this time ....
    we have two different clients (100 & 800) in two different  ecc servers. in both of these servers in 100 of system-1 and 800 of system-2 ,,, implementation is done.
    so now the problem is we have to compare 100 with 800 and what is missing in 100 has to be copied or what ever it may be has to be brought in to system 1 ( client 100)
    i mean earlier what we were doing in 100 & 800 differently , now should me done in one single server.
    how can i proceed , plz give me step by step procedure or give me some links.
    it will be highly greatful .
    thanks in advance
    akhil

    Hi Akhil,
    Hi you can compare tables in two different client in <b>SCMP</b>
    Regards,
    Suraj

  • JInitiator - 2 versions for two different systems

    I had a requirement of having two differnt versions of Jinitiator loaded on a single client system. This is requiremnt for two different applications say application 'a' and application 'b';
    Will browser recognise which one to choose depending upon application ?

    Yes, the confirguration information on the application server defines which version of the plug ins to us and so the correct one will be loaded.
    Regards
    Grant Ronald
    Oracle Product Management

  • Intensity Pro Disappears from two different systems

    I posted this question on the BMD forums and with BMD tech directly, still no answer, going to try my luck here!
    I have two Mac Pros (MacPro3,1 early 2008), one is running 10.6.8 and the other is running 10.9.2. Each of them has an Intensity Pro card in it. I'm not sure when this problem started, but I'd say about a year ago in BMD drivers I didn't have this issue. I'd like to roll back to a working version of the BMD drivers, but I don't know which one to go to.
    For a while now, after a few reboots, the card disappears from the system and isn't detected by the computer or the drivers, or Media Express.
    I have tried rebooting, clearing the EFI, clearing the boot caches, but the only thing that seems to work is moving the card to a different PCIe slot. Then it's fine for a few months, eventually disappears again, and I move it back to the old slot, and it shows up again for another few months.
    The machines are identical, except one has a Radeon 5000 series video card. They both have 16GB RAM, and no other cards in the PCIe slots, save the GPU.
    Wierd huh?
    *UPDATE*
    I am now running V10 drivers on the Mavericks system, and V8.6.1 on the Snow Leopard system. No change. Every time I have to power off or reboot, the cards are gone. Then I have to shut the machine off again, move the offending cards to different slots, start up again, and they're back...
    Note: This doesn't affect my Radeon cards or my UAD1 card.

    I'm currently running Blackmagic Desktop Video Macintosh 9.9.2 on a Mac Pro 5,1 (2010) with Mavericks (10.9.2) without any issues (using an BM Intensity Pro card). Previously ran Blackmagic Intensity Macintosh 3.9.4 on a Mac Pro 2,1 (2007) with Snow Leopard without issue.

  • Difference in LOCL print preview for same script in two different systems

    Hi All,
    When I am testing a dunning letter ( Custom sapscript) in my testing system the LOCL print preview is correct...When I am testing  it in my development system by taking print preview from LOCL it is not printing a uline and some line item headers...
    There is one text element for printing line item header.
    U1....ULINE(73)
    T0    &vline& ....&T_MATNR&..
    T3    &vline&
    UL   &ULINE(73)
    IN Development sytame in print preview every thing is perfect except the above portion the first uline and vline are not getting printed and as a result next vline and uline are dispalyed a bit above .. I am unable to understand why one uline is not printed but the othe one is printed as we are using HELVE12 in both cases and above all  why in test system this problem is not occuring..
    I checked and am 100% sure there is no difference between the layout versions in the two sapscripts...Also checked most of the SPAD configs in two systems and found them same..
    Can you give me any idead about the reason for the diffrence in print preview as in both cases it will consider the printer installed on the local desktop....
    Just we use citrix metaframe to log in SAP but that should not be the reason as thne problem would be in both system..
    Please help me out...
    Thanks and Regards
    Sweta

    Hi ,
    I already mentioned that I am selcting LOCL ( Device type Sapwin)  in both cases so in both cases it is considering the printer installed on the local system...
    Can anyone tell me specific spad config or anything else which I need to compare in both systems..

  • How to execute Script in Test Plan with two different System Data Container

    Dear members,
    I have a requirement.
    I need to execute one Test Config in a Test Plan with one System Data Container and another Test Config in a Test plan with another SDC.
    How to achieve this ?
    Kind regards,
    Pradeep
    Edited by: Pradeep Singh Rawat on Mar 23, 2011 7:10 AM

    >
    Pradeep Singh Rawat wrote:
    > I need to execute one Test Config in a Test Plan with one System Data Container and another Test Config in a Test plan with another SDC. How to achieve this ?
    Currently it is not possible, to maintain more than one SDC on a test plan.
    A workaround is, to maintain one SDC on a test plan and specify no target system direct in a test plan. If you maintain then your  two systems in one SDC, you can specifiy each target system in the test configuration, where it is needed.
    Here the example:
    test plan:
    systemdata container: SDC_ALL
    target system: <empty>
    test config 1:
    systemdata container:
    target system: CRM
    test config 2:
    systemdata container:
    target system: ERP
    systemdata container: SDC_ALL
    target system: CRM -> rfc 1
    target system: ERP -> rfc 2
    Kind regards,
    Christoph

  • Installing two Different Systems

    I posted this previously but my question was not very clear so I'll restate it (hopefully ) better.
    I have a dual 1gig G4. I want to run Tiger for my daily work and keep 10.5 on the machine for when I am not DJing. Right now Leopard crashes in the middle of a set and I have lost remote control on both my Macally and Keyspan triggers. What I wanted to avoid was losing my playlists, Having to reimport my music which has metadata stored with BPM, Genres etc. When I have changed my system previously all that time intensive work has failed to make the migration.. I DO NOT want to run them simultaneously. Can you install both operating systems then open applications in which ever system I booted from OR do I need two separate Applications folder. It seems that at most I would need two Libraries but not duplicate apps. Does that sound reasonable?

    Thanks how would I know?I really need only two apps in 10.5 Traktor & Mac Ally keypoint. oh yeah plus iTunes but the issue is would I need to recreate all my iTunes notes, playlists or bpm info?That would be the dealbreaker

  • Query : Send same data to two different systems

    Hi,
    We are getting data from BI to PI through proxy. And using soap adapter we are sending the data to non sap system.
    Now my query is : I want to send the data which came from BI to PI to two non sap (Prod and Quality) systems. How can we do that? Waiting for your help me on this.

    Hi,
    You have to add 2 receivers in receiver determination (one for quality & one for prod).
    After that, create 2 interface determinations separately one for each, also 2 receiver agreement & 2 receiver channels.
    -Supriya.

  • Client Copy between Two Different Systems

    Hi!!
    Could someone please explain or provide any documentation which explains how to perform client copy between two r/3 systems of same version(ecc 6.0)
    Thanks and Regards,
    Vishwa.

    Hi,
    Save the contents that need to be copied in a Transport request at source client.
    Now at the target client system,
    execute transaction 'SCC1' and give the TR number and execute it.
    The changes from the source client system this way will get copied to destination client system.
    Reward if useful!
    Thanks,
    KalpanaR

  • Compare two queries of two different system.

    Hello all,
           I need to certify the some queries, the process we follow is as below.
    1. The query will be created in Production system, we will transport back to Development server.
    2. Compare the query (Characterstics, Key Figures and Definition), In other words I need to compare and validate each and every aspect of Query with the Development and Production.
    3. I need to change the query if I find anything difference in Prod and Dev system.
    4. Transport to the Production.
    Here my problem is I'm comparing manually by opening RRMX in each of the system and each variable, its time consuming as it is a manual process there is a chance of missing some important. So I would like to know is there any way to compare the queries Prod and Dev server in easier way than manually.
    I hope requirement is clear to you or else just let me know your concerns and thoughts on this.
    Thanks in advance,
    Umashankar

    Umashankar,
    I dont think there is an easy way to do this as you are asking for - however you can do a basic level comparison as to number of query ellements , variables that are there etc - this can be done using the table rszcompdir which has all the query elements of the query but then a direct one to onw comparison may not be possible since the query elements are identified by GUIDs which usually will be different across systems.

Maybe you are looking for